summaryrefslogtreecommitdiffstats
path: root/src/vnet
AgeCommit message (Collapse)AuthorFilesLines
2018-04-12bond: 1 packet/frame == bad performance [VPP-1236]Steven1-6/+8
While https://gerrit.fd.io/r/#/c/11316/ took care of 1 packet/frame for most of the bonding modes, it missed the broadcast mode. This patch is to fix the 1 packet/frame for the broadcast mode. Change-Id: Iac48a2977c7f702f341479cc712a6448090dbc60 Signed-off-by: Steven <sluong@cisco.com>
2018-04-10Make IPsec tunnel intf work with IPv4 output featuresMatthew Smith2-0/+13
With no IPv4 output features on an IPsec tunnel inferface, when packets are forwarded to that interface, they reach the ipsec-if-output node via the output_node_index on the hw interface and they are handled correctly. When an IPv4 output feature (e.g. output ACL, outbound NAT) is enabled on an IPsec tunnel interface, outbound IPsec stops working for that interface. The last node in the ip4-output feature arc is interface-output. From there a packet is sent to ipsec<N>-output, and then ipsec<N>-tx. The tx function for an IPsec tunnel interface that is called by ipsec<N>-tx is a dummy that doesn't do anything except write a warning message. Enable a feature on the interface-output feature arc for an IPsec tunnel interface so the ipsec-if-output node is reached from the interface-output node. Change-Id: Ia9c73d3932f5930ec7ce0791a0375b1d37148b01 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2018-04-09features: don't break linked list, create separate one for arcDamjan Marion3-5/+5
We need to keep original linked list so destructire can remove entries. Change-Id: I5ff5ca0e1a417d88707255207725bba46433c943 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-04-09L2: no-flood interface type in the Bridge-DomainNeale Ranns5-11/+42
Change-Id: I50ff0cacf88182f8e0be19840c50f4954de586e2 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-04-09plugins: unload plugin if early init failsDamjan Marion2-0/+57
Change-Id: I32f68e2ee8f5d32962acdefb0193583f71d342b3 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-04-09DVR: save the rewrite length in packet meta-data for featuresNeale Ranns1-3/+9
Change-Id: I0efd03bdb84bc9ff2334d398bfdb82486228114a Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-04-07BIER coveroty fix for unintialised return value on errorNeale Ranns1-1/+1
Change-Id: I2b1d1035f810cb58356626cf081d46eb289265b4 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-04-06Change l2-fwd node to allow possible feature before UU-FLOODJohn Lo1-6/+14
If l2-fwd node does not find an L2FIB entry for DMAC of packet, use input feature bitmap to find next node instead of always sending packet to l2-flood node to perform unknow unicast flood. It provides possibilty of using other feature to forward unknow unicast packet instead of flooding the BD. Change-Id: I56b277050537678c92bd548d96d87cadc8d2e287 Signed-off-by: John Lo <loj@cisco.com>
2018-04-05IPIP: version.h is not neededNeale Ranns1-1/+0
Change-Id: I78a4176f98c2b4630a57ac5ddb7faf58ba0c4ee1 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-04-04Detailed stats collection featureNeale Ranns5-23/+290
Use device-input and interface-output feautre arcs to collect unicast, multicast and broadcast states for RX and TX resp. Since these feature arcs are present only for 'physical' interfaces (i.e. not su-interfaces) counter collection is supported only on parent interface types. Change-Id: I915c235e336b0fc3a3c3de918f95dd674e4e0e4e Signed-off-by: Neale Ranns <nranns@cisco.com> Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2018-04-04NAT added FIB entries have a preference lower than API/CLINeale Ranns2-0/+6
Change-Id: Ia99490180683e8649784f7d9d18c509c3ca78438 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-04-03reassembly: bug fixesKlement Sekera3-17/+22
This change fixes a bug which would corrupt features infra by making feature infra resistant to double-removal. It also fixes 'out of memory' issue by properly initializing the bihash tables. Change-Id: I78ac03139234a9a0e0b48e7bdfac1c38a0069e82 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-04-03session: use fib index in ip local testFlorin Coras1-1/+1
Change-Id: I148cb40c8bea55dabe54fa6a662d46862e571640 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-03-30tapv2: Sporadic SIGABRT in ethernet_input [VPP-1183]Steven2-5/+6
virtio_free_rx_buffers uses the wrong slot in the vring to get the buffer index. It uses desc_next. It should be last_used_idx which is the slot number for the first valid descriptor. Change-Id: I6b62b794f06869fbffffce45430b8b2e37b1266c Signed-off-by: Steven <sluong@cisco.com>
2018-03-30bond: show trace causes a crash if the interface is deletedSteven3-13/+32
For the debug image, if the interface is removed and the trace was collected prior to the interface delete, show trace may cause a crash. This is because vnet_get_sw_interface_name and vnet_get_sup_hw_interface are not safe if the interface is deleted. The fix is to use format_vnet_sw_if_index_name if all we need is to get the interface name in the trace to display. It would show "DELETED" which is better than a crash. Change-Id: I912402d3e71592ece9f49d36c8a6b7af97f3b69e Signed-off-by: Steven <sluong@cisco.com>
2018-03-29Coverity fixes (VPP-1204)Chris Luke5-12/+15
Minor bug fixes CID 183000: double close CID 180996: dead code CID 180995: NULL deref CID 181957: NULL deref CID 182676: NULL deref CID 182675: NULL deref Change-Id: Id35e391c95fafb8cd771984ee8a1a6e597056d37 Signed-off-by: Chris Luke <chrisy@flirble.org>
2018-03-29ip6: fix ip6-local urpf checkingFlorin Coras1-4/+7
Use sw_if_index[VLIB_TX] if set as fib index when doing the urpf check. Change-Id: I5ec3e7f7a54c6782704d91e9a5614fd0f7f9e3de Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-03-29l2_input:optimize counter accessEyal Bari1-31/+16
only one counter update per frame (was updated per iteration) only access ethertype for casts (was always accessing ethertype) Change-Id: I3a3c3219ec63e975cf5bd8cf2d93103932a4aaa3 Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-03-29tcp: fix fib index buffer taggingFlorin Coras3-14/+19
Change-Id: I373cc252df3621d44879b8eca70aed17d7752a2a Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-03-29No need for this routine to be globalDave Barach1-1/+1
Causes subtle misbehavior elsewhere Change-Id: I3a0ade26e8e03b8c5dc8e722f6a01fb99ec7a1e0 Signed-off-by: Dave Barach <dave@barachs.net>
2018-03-28bond: cli renameSteven1-11/+10
rename "enslave interface <slave> to <BondEthernetx>" to "bond add <BondEthernetx> <slave> "detach interface <slave>" to "bond del <slave>" Change-Id: I1bf8f017517b1f8a823127c7efedd3766e45cd5b Signed-off-by: Steven <sluong@cisco.com>
2018-03-28SCTP: use custom fibMarco Varlese2-7/+12
Following TCP fixes from Florin (11430), this patch follows the same approach to indicate a fib (not just using the default one). Change-Id: Ib883aa0e9a1c6157acfea69c44426ba07d6c932a Signed-off-by: Marco Varlese <marco.varlese@suse.com>
2018-03-27vxlan:refactor add del command functionEyal Bari1-102/+43
Change-Id: I33ba5a011100baf1c786f9a63a0cf3d2e1020493 Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-03-27bond: coverity woesSteven2-27/+32
coverity complains about statements in function A function A { x % vec_len (y) } because vec_len (y) is a macro and may return 0 if the pointer y is null. But coverity fails to realize the same statement vec_len (y) was already invoked and checked in the caller of function A and punt if vec_len (y) is 0. We can fix the coverity warning and shave off a few cpu cycles by caching the result of vec_len (y) and pass it around to avoid calling vec_len (y) again in multiple places. Change-Id: I095166373abd3af3859646f860ee97c52f12fb50 Signed-off-by: Steven <sluong@cisco.com>
2018-03-26VCL: add IPv6 to socket_test.sh and make testDave Wallace1-2/+4
Change-Id: If3827828062a46f1cce43642535333f677f06e62 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2018-03-26Restore the brief FIB entry printingNeale Ranns1-7/+7
Change-Id: I007d48aeb934e5d2f087ca3b8ddc6f7a0e48d411 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-26afpacket: Fix the reply if itf already exitsMohsin Kazmi1-1/+3
Change-Id: I47768ea50140222fec54e97cbaff2049bd3cb599 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2018-03-25session: fix local session disconnectsFlorin Coras3-22/+58
Select the right segment manager for local sessions established via global table. Change-Id: I88ad4bf70d0cae160a0c744950098a954dfbc911 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-03-23Drop dhcp pkts w/ hardware address mismatchesDave Barach2-11/+40
Add a few dhcp client rx packet/state counters Temporarily disable the dhcp client unit test, since it trips over the newly-added hardware address check. Change-Id: I7f68607e6ed3d738cba357c3fe76664a99b71cd8 Signed-off-by: Dave Barach <dave@barachs.net>
2018-03-23IPSEC_AH: broken initialization (VPP-1208)Marco Varlese1-1/+1
The init-path for IPSEC_AH where the CTX gets initialized is broken since the for-loop never executes due to the wrong usage of tm->n_vlib_mains which being subtracted by 1. Change-Id: I4d967f52cd3ca061aa60d824d65f446e06162403 Signed-off-by: Marco Varlese <marco.varlese@suse.com>
2018-03-23tcp/session: sprinkle prefetchesFlorin Coras4-16/+37
Change-Id: Idef3c665580c13d72e99f43d16b8b13cc6ab746f Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-03-23session: allow builtin apps to register namesFlorin Coras6-20/+73
Change-Id: I4b428e170436671b329657283cf7653befc85c9f Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-03-22bond: performance enhancementSteven3-155/+220
We were only puting one packet per frame to the output node. Change to buffer multiple packets per frame. Performance is now on top of dpdk-based bonding. Put a spinlock in the tx thread in case the rug is pulled under us. Change-Id: Ifda5af086a984a7301972cd6c8e428217f676a95 Signed-off-by: Steven <sluong@cisco.com>
2018-03-22acl-plugin: implement ACL lookup contexts for "ACL as a service" use by ↵Andrew Yourtchenko1-1/+2
other plugins This code implements the functionality required for other plugins wishing to perform ACL lookups in the contexts of their choice, rather than only in the context of the interface in/out. The lookups are the stateless ACLs - there is no concept of "direction" within the context, hence no concept of "connection" either. The plugins need to include the The file acl_lookup_context.md has more info. Change-Id: I91ba97428cc92b24d1517e808dc2fd8e56ea2f8d Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-03-22Avoid atomic ops when polling queuesDave Barach1-4/+5
Change-Id: I31c6a0a1d11b5b12d8a5c32c29fea9618b1a53d4 Signed-off-by: Dave Barach <dave@barachs.net>
2018-03-21udp: make udp encap pool cacheline alignedDamjan Marion1-1/+1
This fixes issue with unaligned vector access on gcc-7. As udp_encap_t is declared as cacheline aligned, alloc also need to be. Change-Id: Ic30876911baf2c22c135097490075fa7bcf0ca18 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-03-21bond: Add bonding driver and LACP protocolSteven7-0/+2768
Add bonding driver to support creation of bond interface which composes of multiple slave interfaces. The slave interfaces could be physical interfaces, or just any virtual interfaces. For example, memif interfaces. The syntax to create a bond interface is create bond mode <lacp | xor | acitve-backup | broadcast | round-robin> To enslave an interface to the bond interface, enslave interface TenGigabitEthernet6/0/0 to BondEthernet0 Please see src/plugins/lacp/lacp_doc.md for more examples and additional options. LACP is a control plane protocol which manages and monitors the status of the slave interfaces. The protocol is part of 802.3ad standard. This patch implements LACPv1. LACPv2 is not supported. To enable LACP on the bond interface, specify "mode lacp" when the bond interface is created. The syntax to enslave a slave interface is the same as other bonding modes. Change-Id: I06581d3b87635972f9f0e1ec50b67560fc13e26c Signed-off-by: Steven <sluong@cisco.com>
2018-03-21VPP_1202: handle DHCP NAK packetsDave Barach2-1/+28
Change-Id: I469a734747099cef2d135d77e4db0244e24bf0bc Signed-off-by: Dave Barach <dbarach@cisco.com>
2018-03-21UDP Encap countersNeale Ranns3-0/+65
Change-Id: Ib5639981dca0b11b2d62acf2c0963cc95c380f70 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-21Detailed Interface stats API takes sw_if_indexNeale Ranns1-1/+4
Change-Id: Id09d777c1706c1d613b14b719bcac596194465cd Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-21reassembly: feature/concurrencyKlement Sekera12-353/+795
This change makes ip reassembly an interface feature, while adding concurrency support. Due to this, punt is no longer needed to test reassembly. Change-Id: I467669514ec33283ce935be0f1dd08f07684f0c7 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-03-20FIB Interpose SourceNeale Ranns31-4343/+5452
The interpose source allows the source/provider to insert/interpose a DPO in the forwarding chain of the FIB entry ahead of the forwarding provided by the next best source. For example if the API source (i.e the 'control plane') has provided an adjacency for forwarding, then an interpose source (e.g. a monitoring service) couold interpose a replicatte DPO to copy the traffic to another location AND forward using the API's adjacency. To use the interose feature an existing source (i.e FIB_SOURCE_PLUGIN_HI) cn specifiy as a flag FIB_ENTRY_FLAG_INTERPOSE and provide a DPO to interpose. One might also consider using interpose in conjunction with FIB_ENTRY_FLAG_COVER_INHERIT to ensure the interpose object affects all prefixes in the sub-tree. Change-Id: I8b2737b985f8f7c08123406d0491881def347b52 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-19Use x(void) not x() in new interface stats codeNeale Ranns2-5/+5
Change-Id: Iaceaba4dc22341c631c858516b960ce97c4aa564 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-19session: fix coverity warningsFlorin Coras2-1/+12
Change-Id: I022dc40476ea9c30957b12bf1bd0629c6eb41cda Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-03-19Coverity found bugs in recent MPLS changesNeale Ranns3-17/+8
Change-Id: I590945fdc1af53208c990a52bbecdc992fd27532 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-03-19QoS code coverity found errorsNeale Ranns1-2/+2
Change-Id: I6b125b79bdc560bfb81f307367c844b6a5af6368 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-03-19FIB code coverity found defectNeale Ranns1-1/+1
Change-Id: I7cdc29dd6481242aaace75138cc34e2f5ea76b81 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-03-19Interface Unicast, Multicast and Broadcast stats on the APINeale Ranns4-6/+162
Change-Id: I7c75da358aff1bd0216a602a49f2909cef5d920d Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-19IGMP pluginJakub Grajciar2-2/+36
- host mode: igmp_listen - API to signal that the host has joined an (S,G) - route mode: igmp_enable - API to enable the reception of host IGMP messages igmp_event - API to report the host join/leave from an (S,G) Change-Id: Id180ec27dee617d33ab3088f5dcf6125d3aa9c8f Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2018-03-19IPIP: Fix coverity error.Ole Troan1-0/+3
Change-Id: Ia2b3350bf8e2c72eee3f33936ba16dd817c75c72 Signed-off-by: Ole Troan <ot@cisco.com>