Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: feature
Adding a prefix to an interface was not permitted if it overlapped
with another prefix on an interface which used the same FIB.
Loosen the restriction. Allow 2 or more addresses from the same
prefix on a single interface. Reference count the prefix to figure
out when a glean/connected route for the prefix needs to be added
or removed.
Added unit tests to check that the route is only removed when all
addresses in the prefix are removed from the interface.
Change-Id: I1a962ecb5e1ee65fc6d41f98a4cc097a51a55321
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: fix
Change-Id: I32d4d4a5de04e89087f4ab4a5c425eda572932a8
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type:fix
Transports like tcp may notify session layer of a close but they may
defer the connection's deletion (e.g., tcp time-wait). During that time,
transports may still want to send packets. So, unless the session has no
transport (transport-deleted state), allow the transport to send.
Change-Id: I3ae335c7b951ff64be8529a5e3f3ad790feddc84
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type:fix
Also fix transport close while handshake is ongoing.
Change-Id: I004c56d2297d0847c2cb77202f8fba3edaacad29
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type:fix
Change-Id: I5994fb53dc4b9fd58920b3d67472c38b41db27c2
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
usage: vppapitrace.py [-h] [--debug] [--apidir APIDIR] {convert,replay} ...
optional arguments:
-h, --help show this help message and exit
--debug enable debug mode
--apidir APIDIR Location of JSON API definitions
subcommands:
valid subcommands
{convert,replay} additional help
convert Convert API trace to JSON or Python and back
replay Replay messages to running VPP instance
To convert an API trace file to JSON:
vppapitrace convert /tmp/api.trace trace.json
To convert an (edited) JSON file back to API trace for replay:
vppapitrace convert trace.json api-edited.trace
To generate a Python file that can be replayed:
vppapitrace convert /tmp/api.trace trace.py
vppapitrace convert trace.json trace.py
Replay it to a running VPP instance:
vppapitrace replay --socket /tmp/api.trace
In VPP that file can be replayed with:
vpp# api trace replay api-edited.trace
This patch also modifies the API binary trace format, to include the
message id to message name table.
Change-Id: Ie6441efb53c1c93c9f778f6ae9c1758bccc8dd87
Type: refactor
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
When session is owned by another thread, avoid postponing the generation
of the rx event.
Type:fix
Change-Id: Ie6afc8116ce40e83d8aae0432b48e19b31287d8b
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type:refactor
Change-Id: I37dbc8b55827d66c2578d6ab8b86ed7e18198aa6
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type:fix
Also changes the way the ctx is freed. TLS now waits for tcp delete
notification before freeing the ctx.
Change-Id: I2f606a9ce7b3755ae9d11d6fe714fe11b65dcb98
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type:fix
Change-Id: I1e6f2cb28c1bf544cc3d060b11c8935f9edb0eed
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Without this the use of uc0 is racy between the current thread and the
thread that owns it and will delete it.
This also ensures we don't trigger a read event on the session before
moving it to the right thread and notifying the application.
Type: fix
Change-Id: Icb1ca3ee5805ea3c0d2d424d4b23511465deb3b6
Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
|
|
Type:fix
Fixes:4208a4c
Change-Id: I7077788cd14f539b06ead5dc65d8411940438bae
Signed-off-by: Florin Coras <fcoras@cisco.com>
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Type: feature
Change-Id: I1632ff23b1bf6d91aa3406c95ebd6ef0aa595f35
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Change-Id: I56f5f5e7e6430552f0346a65b1e5707edc28c1c0
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: fix
Fixes: 039cbfe2
Signed-off-by: Prashant Maheshwari <pmahesh2@cisco.com>
Change-Id: Idca91c73758824688dd6ce61df994be66753d838
|
|
Type:refactor
Also remove tx stats. Expectation is that transports will keep track of
them.
Change-Id: I083b328d87d0ad3688b630ddb5ef97827a4dbc2b
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Fix UDP over IP6 checksum offload setup for VXLAN and VXLAN-GBP.
Type: fix
Signed-off-by: John Lo <loj@cisco.com>
Change-Id: If110467a68234d8eed941869a2a03735f339dc33
|
|
Fix ip6_tcp_udp_icmp_compute_checksum to work properly for packets
with multiple buffers.
Fix ip4_tcp_udp_compute_checksum to exit upon detecting error.
Type: fix
Signed-off-by: John Lo <loj@cisco.com>
Change-Id: I673547f4479d72cd60757383343fc562cff10265
|
|
map_guest_mem may return null. Coverity complains about calls
without checking its return. Simple stuff.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I0626115f4951a88f23d9792f0232fb57c132fbc2
|
|
Type:feature
Change-Id: If02884d0f1f26bfe31ec609ea9611cb27b699868
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
This patch gets rid of an ugly warning during vpp startup:
"vnet_feature_init:143: WARNING: arp arc: last node is arp-disabled,
but expected error-drop!"
Type: fix
Fixes: 1ff56f00ca015e82ef29955986e503913d1c3b86
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I80914a3c113c090a09bd5a5131e39f036871d92e
|
|
Type: fix
Fixes: 1404698df397bc4d3007daea41f52ad75ed4486c
Change-Id: Ibb77d95bb5e862cf5d1cb65843c526fd2e225c62
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
1. Add option '[gso-enabled]' in cli 'create interface virtio'
2. Add gso information in virtio_show()
Change-Id: I4eb58f4421325ef54a6a68c8341b3a6d3d68136a
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
|
|
Provide default packet_to_capture value. Display interface name
correctly for "pcap tx/rx trace status".
Type: fix
Signed-off-by: John Lo <loj@cisco.com>
Change-Id: I7064d0dbea236a9aff68bba7fbaf2c4a73b16c6f
Signed-off-by: John Lo <loj@cisco.com>
|
|
Type: feature
Change-Id: Ia9a5b1a6d85c7f3f2e6db583b33b5b20029a1e88
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: fix
Change-Id: I1fa8c5326d6f22cfb8dd40e97d8a22d11a716922
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
* deactivtates the TODOs on doxygen (were empty)
* This move punt.md to readthedocs (should be the new
place for dev doc ?)
* Makes Handoff queue demo plugin a child of dev doc
in doxygen
Type: fix
Change-Id: I1f0476a911b35208212af8dd608bc76160efd22a
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Previous implementation of clib_rwlock_t used two spinlocks: one
writer lock, and one to guard the counter for the number of readers.
This implementation uses a single condition variable rw_cnt which
has the following properties:
if a writer has the rwlock, rw_cnt = -1
if the rwlock is free, rw_cnt = 0
otherwise, rw_cnt > 0 and rw_cnt = number of readers
rw_cnt will never be less than -1
Benchmarking:
The results below are the cycle counts from test_rwlock.c, configured so
that for 10000 iterations, 6 reader and 6 writer threads on separate cores
are spawned such that each writer thread increments a global counter
10000 times in each iteration. For Taishan, 4 reader and 4 writer
threads are spawned in each test.
x86 Xeon old rwlock: 12.473e8, 11.655e8, 13.201e8, 11.347e8, 13.182e8
x86 Xeon new rwlock: 5.881e8, 5.796e8, 6.536e8, 5.540e8, 5.890e8
Aarch64 ThX2* old rwlock: 9.263e7, 8.933e7, 9.074e7, 8.979e7, 9.378e7
Aarch64 ThX2* new rwlock: 7.221e7, 8.107e7, 7.515e7, 7.672e7, 7.386e7
A72 old rwlock: 3.268e6, 3.200e6, 3.086e6, 3.176e6, 3.170e6
A72 new rwlock: 1.261e6, 1.288e6, 1.251e6, 1.229e6, 1.234e6
*ThunderX2 used additional gcc options "-march=armv8.1-a+crc+crypto+lse"
Type: refactor
Change-Id: I7c347d3037b36205ab532cbcb52a374c846eb275
Signed-off-by: Jason Zhang <jason.zhang2@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Lijian Zhang <Lijian.Zhang@arm.com>
|
|
Type: fix
Fixes: fe2fff37
this improves the tracing for dropped ARP packets
Change-Id: Iefd0391e349fc54f1beebda403b2349534b20c48
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type:fix
Change-Id: I2f4224a53360f533c086ebde6a3056e60431da87
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: fix
Fixes: 83832e7ced8be8b7de394415feaba70c32e3c38d
Change-Id: I63130c442f71d1aef0d389ab00bac8092224bec2
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
There is a need to be able to specifiy whether a prefix in
a request is to match exactly or if more specific
prefixes are also desired.
Todo: Uncomment defaults, once supported in vppapigen.
Type: feature
Change-Id: I74fdef0e89e3aefda822c7c0a477e22479297a90
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Add gso option in create vhost interface to support gso and checksum
offload.
Tested with the following startup options in qemu:
csum=on,gso=on,guest_csum=on,guest_tso4=on,guest_tso6=on,guest_ufo=on,
host_tso4=on,host_tso6=on,host_ufo=on
Type: feature
Change-Id: I9ba1ee33677a694c4a0dfe66e745b098995902b8
Signed-off-by: Steven Luong <sluong@cisco.com>
|
|
Type: feature
store: write a QoS value into the buffer meta-data
record: Extract a QoS value from a packet header and store it.
mark: Make a change to the content of a packet header by writing a stored
QoS value
Change-Id: I07d1e87dd1ca90d40ac1ae1774fee1b272cab83f
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Enabling capture on pg with the file already existing
results in a misleading error message. Fix the text.
Change-Id: I1aea49cfeda3b4bfe6ed7b18fd543948a078508a
Type: fix
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Spinlock performance improved when implemented with compare_and_exchange
instead of test_and_set. All instances of test_and_set locks were refactored
to use clib_spinlock_t when possible. Some locks e.g. ssvm synchronize
between processes rather than threads, so they cannot directly use
clib_spinlock_t.
Type: refactor
Change-Id: Ia16b5d4cd49209b2b57b8df6c94615c28b11bb60
Signed-off-by: Jason Zhang <jason.zhang2@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Lijian Zhang <Lijian.Zhang@arm.com>
|
|
Type: fix
Change-Id: I01eeedf8d5015b07b9422c65afe78bfe8177c22c
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Ticket: 1729
The flags that are permanently set on a path-list should form part of
its key in the path-list DB. Otherwise, if shared, they will not behave
as expected.
Change-Id: I0aa7c7c5d270c97b08014e4a47ddbdcee2358706
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Ticket: 1728
Change-Id: I679c2b8c5b0f751c9476db3669ab3f6c26dcdd28
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Change-Id: I0c9353598d3c9b7ea587ea8a2b6e1faa5454843d
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
All instances of test_and_set locks used the following sequence
to release the locks:
CLIB_MEMORY_BARRIER ();
p->lock = 0; // p is a generic struct with a TAS lock
Use clib_atomic_release to generate more efficient assembly code.
Type: refactor
Change-Id: Idca3a38b1cf43578108bdd1afe83b6ebc17a4c68
Signed-off-by: Jason Zhang <jason.zhang2@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Lijian Zhang <Lijian.Zhang@arm.com>
|
|
Type: fix
Fixes: c30d87e6139c64eceade54972715b402c625763d
Change-Id: I86b606b18ff6a30709b7aff089fd5dd00103bd7f
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Modified test-and-set spin locks to call CLIB_PAUSE () when spinning
for code consistency. Decreases the memory bandwidth consumed.
Type: fix
Change-Id: I1cca4f87f44f23f257c7a35466cd2e7767072f51
Signed-off-by: Jason Zhang <jason.zhang2@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Lijian Zhang <Lijian.Zhang@arm.com>
|
|
Type:fix
Freeing mq messages in vpp (producer), if enqueueing fails, invalidates
consumer assumption that messages can be freed without a lock.
Change-Id: I748a33b8846597bdad865945d8e899346d482434
Signed-off-by: Florin Coras <fcoras@cisco.com>
Signed-off-by: Tal Saiag <tal.saiag@gmail.com>
|
|
Add the FIB_SOURCE_INVALID fib source type. This allows to spot
uninitialized fib source more easily (0 no longer means special) and we
can use it as placeholder when no source is present.
Use it to fix FIB_ENTRY_DBG() which was accessing the 1st source, even
when no sources were present.
Type: fix
Fixes: 710071bf0e
Change-Id: I980b6a6a07616d4a8d6f2db166a1dd335721c74d
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: feature
Change-Id: I72676495a85fbecc946aa266a75234cce70c3a5e
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
SRH has passed WG review in IETF and currently an IESG document.
This patch updates the SRH definition to be compliant with IETF.
- Change "first_segment" to "last_entry"
- Change "reserved" to "tag"
Change-Id: I1765c968671655c5646f6de478d1f7196abbc040
Type: fix
Signed-off-by: Ahmed Abdelsalam <ahabdels@cisco.com>
|
|
Update the sr_localsid code to set the DPO for SRv6 End.T behavior.
Change-Id: I17e102a419eb2b4fdd1de7a672b109e4ff7e1dc2
Type: fix
Signed-off-by: Ahmed Abdelsalam <ahabdels@cisco.com>
|
|
Type:feature
To be used by transports overwriting the connection id.
Change-Id: Ia5dbd9dccc2e3eb62e602514b24882ddc12ff1f2
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: feature
Change-Id: I5e030b23943c012d8191ff657165055d33ec87a2
Signed-off-by: Florin Coras <fcoras@cisco.com>
|