summaryrefslogtreecommitdiffstats
path: root/src/vnet
AgeCommit message (Collapse)AuthorFilesLines
2019-12-21session: move add/del segment msg to mqFlorin Coras5-8/+140
Type: refactor Change-Id: I32234173ebd69f80acb1afa4039fffbd19157f6d Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-12-20vxlan: reuse inner packet flow hash for tunnel outer header load balanceShawn Ji3-0/+22
Type: fix Several tunnels encapsulation use udp as outer header and udp src port is set by inner header flow hash, such as gtpu, geneve, vxlan, vxlan-gbd Since flow hash of inner header is already been calculated, keeping it to vnet_buffere[b]->ip.flow_hash should save load-balance node work to select ECMP uplinks. Change-Id: I0e4e2b27178f4fcc5785e221d6d1f3e8747d0d59 Signed-off-by: Shawn Ji <xiaji@tethrnet.com>
2019-12-19interface: Prevent bad inner-dot1q any exact-match configurationJon Loeliger2-3/+13
Someone much more knowledgeable than I wrote: For L3 IP forwarding, any VLAN tags on a packet must be exact match to a sub-interface which means both outer and inner VLAN tag IDs must be exact-matched to specific values defined of that sub-interface. Without exact match on a L3 sub-interface, VPP has no mechanism to know what VLAN tags to use for packet output, such as ARP request packets or IP packets, on that sub-interface. Thus, sub-interface with "inner-dot1q any" is not an exact match sub-interface by definition since no match is present on inner tag. While in the area, fix a memory leak that would ensue on poorly configured interfaces. Change-Id: I8d17a96dbca3e3724c297ecc935ca61764e6ce2e Type: fix Signed-off-by: Jon Loeliger <jdl@netgate.com>
2019-12-19gre: multipoint ingress lookup fixNeale Ranns6-75/+286
Type: fix Change-Id: I170edd62220a63cb19efea3032e173fb87730b1b Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-12-18ipsec: Fix decap of IPSEC/GRE in transport modeNeale Ranns1-6/+44
Type: fix in transport mode the header sequence is: MAC - IP (tun) - ESP - GRE - L2 so popping the GRE header is done in the ESP decrypt node. Change-Id: Ia125eb65b9300368617d2bffca09683851e43be0 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-12-17pg: don't leak open files in packet-generatorChristian E. Hopps1-0/+3
Fix pg code to close it's open file descriptors before zero'ing the pcap_main structure for re-use. Ticket: VPP-1780 Type: fix Signed-off-by: Christian E. Hopps <chopps@chopps.org> Change-Id: I32945c6476ae83b8d210ee67ac78db3e8f786f46
2019-12-17vxlan geneve gtpu: fix short helpPaul Vinciguerra4-4/+4
Type: fix Change-Id: Id53eb6ed15f270d747b9831a7b585cbafe515dd2 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-12-17ip: cleanup punt socket cli helpPaul Vinciguerra1-11/+20
Make the help string consistent with the cli parser. Type: fix Change-Id: I7140bd589c2a94dbf5af5cc633cb495457a6af22 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-12-17feature: add descriptive cli command output for 'set interface feature'Paul Vinciguerra1-7/+23
DBGvpp# set interface feature local0 arp-foo arc bad-arc set interface feature: Unknown arc name (bad-arc)... DBGvpp# set interface feature local0 arp-foo arc arp set interface feature: Feature (arp-foo) not registered to arc (arp)... See 'show features verbose' for valid feature/arc combinations. DBGvpp# set interface feature local0 arp-disabled arc arp Type: fix Change-Id: I036bb2a75dd2d40f6901e4fde3eb14925238e19b Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-12-17feature: add [verbose] to show features helpPaul Vinciguerra1-1/+1
Type: fix Change-Id: Idf694477c18852e5541c28a493a56b302122e46c Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-12-17l2: l2_patch_main should not be staticVratko Polak1-1/+5
Without understanding what is going on, a pattern from l2_fwd.c is applied to l2_patch.c file. Type: fix Fixes: d770cfc96257f9bd9e0c96c8ebe50e4531dc1bc5 Ticket: VPP-1799 Change-Id: Ia97d448f9d1846549f57ea69044ae15fa39bb942 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2019-12-17bonding: drop traffic on backup interface for active-backup modeSteven Luong1-1/+12
For active-backup mode, we transmit on one and only one interface. However, we might still receive traffic on the backup interface. We should drop them and strictly process incoming traffic on only the active interface. Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: Idb6b798b30033e84044b151c616be3c157329731
2019-12-17flow: add ethernet flowChenmin Sun2-2/+23
Type: feature This patch adds the ethernet type flow support Signed-off-by: Chenmin Sun <chenmin.sun@intel.com> Change-Id: I6de163d04c6472df60a5f296fb428efd000267c4
2019-12-17classify: forbid invalid match configBenoît Ganne1-0/+3
Forbid too long match to be configured. Type: fix Change-Id: Icfced0f86821d5febd6a3c81e1315bd9737498c0 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-12-17ipsec: bind an SA to a workerNeale Ranns11-43/+644
the sequence number increment and the anti-replay window checks must be atomic. Given the vector nature of VPP we can't simply use atomic increments for sequence numbers, since a vector on thread 1 with lower sequence numbers could be 'overtaken' by packets on thread 2 with higher sequence numbers. The anti-replay logic requires a critical section, not just atomics, and we don't want that. So when the SA see the first packet it is bound to that worker all subsequent packets, that arrive on a different worker, are subject to a handoff. Type: feature Change-Id: Ia20a8645fb50622ea6235ab015a537f033d531a4 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-12-17nhrp: mGREv6Neale Ranns1-4/+5
Type: test Change-Id: I7d0496c37e06d3b6eee325a262e5398860282b63 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-12-17l2: fix l2input_feat_names overflowBenoît Ganne1-1/+1
Type: fix Change-Id: I59549b3aab5a0ccfe7db02757f78528e028121a5 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-12-17virtio: fix the tx queue thread bindingMohsin Kazmi1-3/+17
Type: fix Change-Id: Ibbe7e20aebc9153ceba07e048dc0eaa45193f4ea Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-12-17quic: Implement crypto contextsNathan Skrzypczak2-1/+1
Type: feature Make quic use the crypto contexts. This introduces a crypto context pool backed by a hashtable giving ctx indexes by connect params (ckpair, engine, rx & tx fifo sizes). Applications keep the initialization vector common. Change-Id: I22ed6711196cd70a2f2f74240f12113c7af8dfcd Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2019-12-17gso: minor fixes to gso segmentationMohsin Kazmi1-110/+115
Type: fix Change-Id: I01602ba7f1a4820c7790a771a5a7281ed66ff905 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-12-17ip: Protocol Independent IP NeighborsNeale Ranns84-11986/+12715
Type: feature - ip-neighbour: generic neighbour handling; APIs, DBs, event handling, aging - arp: ARP protocol implementation - ip6-nd; IPv6 neighbor discovery implementation; separate ND, MLD, RA - ip6-link; manage link-local addresses - l2-arp-term; events separated from IP neighbours, since they are not the same. vnet retains just enough education to perform ND/ARP packet construction. arp and ip6-nd to be moved to plugins soon. Change-Id: I88dedd0006b299344f4c7024a0aa5baa6b9a8bbe Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-12-17fib: Glean on NBMA interface points to dropNeale Ranns2-86/+85
Type: fix Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: Iaae7a9e120bbf8168c581b06d3ac0e124b32e0e7
2019-12-17fib: Adjacency walk fix for IPv6Neale Ranns1-1/+1
Type: fix Change-Id: Id3a1950e49d5eb1883af06a14df97e98f55162a8 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-12-16vppinfra: bihash walk cb typedef and continue/stop controlsNeale Ranns14-35/+57
Type: feature Change-Id: I28f7a658be3f3beec9ea32635b60d1d3a10d9b06 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-12-15fib: Adjacency creation notifications for dlegatesNeale Ranns6-1/+29
Type: feature Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I3feddfe44dee528b9ca05aa0150e9423306ae49d
2019-12-13bonding: Add /if/lacp/<bond-sw_if_index>/<slave-sw_if_index>/partner-stateSteven Luong2-12/+26
We already had /if/lacp/<bond-sw_if_index>/<slave-sw_if_index>/state in the stats segment. Add also the partner-state to be complete. Change to populate stats segment with the states at startup, after processing an lacp pdu, and after timer expiration. Unit test --------- sudo vpp_get_stats dump | grep /if/lacp 63.00 /if/lacp/3/1/state 61.00 /if/lacp/3/1/partner-state 63.00 /if/lacp/3/2/state 61.00 /if/lacp/3/2/partner-state Type: feature Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: Ib7b8e1183d572bb6e422a846aaa2b7b3559a0dc7
2019-12-13ip: SVR: fix wrong return valueKlement Sekera2-2/+2
Type: fix Change-Id: I9498b660bf2045bb6aac96d19bb9456a14b35847 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2019-12-12ikev2: fix crash during SA rekeyFilip Tehlar1-1/+5
Type: fix Change-Id: Ib00ab9b2f28c0f4d85e96bf95697f61b8e415f37 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2019-12-12session svm: support for segments larger than 4GBFlorin Coras2-8/+8
Type: feature Change-Id: I7d3017bbb369261d74f51807a226f2c12f45291c Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-12-12session svm: per thread fifo segment slicesFlorin Coras4-52/+71
Type: refactor Change-Id: I9be652e56cdb48b0aee3253f7ce8d9bed299d824 Signed-off-by: Florin Coras <fcoras@cisco.com> Signed-off-by: Dave Barach <dave@barachs.net>
2019-12-11api: Use vl_msg_push/pop_heapNathan Skrzypczak1-3/+2
Type: refactor Change-Id: I0eb46676fc22ce6825b2d879498df344b5a855e8 Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2019-12-11session: Add mq debug cliNathan Skrzypczak1-8/+61
Type: feature This add a `show app message queue` cli command that shows mq size per app & thread. Change-Id: I5c6ce024b149fb7a47d899bc514c5a4887429982 Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2019-12-11quic: Add support for unidirectional streamsNathan Skrzypczak4-0/+6
Type: feature Change-Id: I3a642626a444504594c5e3df40dbc92df54136f0 Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2019-12-11devices: vhost API cleanupJakub Grajciar6-26/+174
Use consistent API types. Type: fix Change-Id: I2dec594cb834a45004edc9ca58ad7c7b4bd7ff06 Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2019-12-11devices: tap API cleanupJakub Grajciar5-93/+128
Use consistent API types. Type: fix Change-Id: I11cc7f6347b7a60e5fd41e54f0c7994e2d81199f Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2019-12-10ipsec: Init salt value in SA creation CLI (so it's not random)Neale Ranns1-0/+1
Type: fix Change-Id: Idf4d0b59a1eb2c739a67a4786470884050f81561 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-12-10ip: use explicit types in apiOle Troan1-73/+74
Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I1fd190da28a765ba430952539c291a741aaa3dce
2019-12-10api: multiple connections per processDave Barach43-43/+43
Type: feature Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I2272521d6e69edcd385ef684af6dd4eea5eaa953
2019-12-09ipsec: make sure pad_bytes does not exceed pad data sizeBenoît Ganne1-1/+5
This helps GCC understand the memcpy will not overflow pad_data. GCC-6 (default on Debian 9) in particular got confused. Type: fix Change-Id: I176eb01531b9d5c7ebec40f015e510b2d56e77c4 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-12-08ip: coverity fixjohny1-8/+6
Delete Null-checking "p0" in function ip6_tcp_udp_icmp_bad_length, because it's not necessary. Type: fix Signed-off-by: johny <jan.cavojsky@pantheon.tech> Change-Id: I2bf43a60c1c1d76e42581df27f2285c9e9563093
2019-12-06gso: fix the tap/virtio driver for header offsetMohsin Kazmi2-2/+49
Type: fix Change-Id: Ied34466907fa8ad44f997c600dbf481be4d22027 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-12-06session: close for reset replies independent of stateFlorin Coras1-2/+2
Type: fix Change-Id: I8b8875f1dc9203dfbb443ac43df8250cbb0b1edc Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-12-06tcp: fix tail rescue with sacksFlorin Coras1-5/+7
Type: fix Change-Id: Iad73f47cef3d29c4b0b7d1f58f2f2b14ba4b1d38 Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-12-05classify: vpp packet tracer supportDave Barach1-32/+119
Configure n-tuple classifier filters which apply to the vpp packet tracer. Update the documentation to reflect the new feature. Add a test vector. Type: feature Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: Iefa911716c670fc12e4825b937b62044433fec36
2019-12-05ip: fix cancel termination after receive malformed ip6 packetjohny2-5/+68
This fix is for cancel termination of vpp after receive malformed packet type of ip6.To avoid termination of vpp are checked if are missing data in packet. This occours, when payload length in ip6 header packet is more than real count of data in packet. When this error occours, packet is ignore. Type: fix Ticket: VPP-1693, VPP-1694 Change-Id: I9d9ecea7b75c8702cb31aa8051c8d4d7ce19659d Signed-off-by: johny <jan.cavojsky@pantheon.tech>
2019-12-05srv6-mobileTetsuya Murakami3-18/+258
Type: feature Plug-in for IPv6 Segment Routing Mobile Support the plug-in function in SR Policy. Support GTP4.D plug-in as SR Policy plug-in. Signed-off-by: Tetsuya Murakami <tetsuya.mrk@gmail.com> Change-Id: I306160b7203921d879940193868944158867c482
2019-12-05classify: Fix 2 coverity errorsJon Loeliger1-0/+8
Validate two tainted scalars, filter_sw_if_index, that came from an API message. Type: fix Change-Id: I3ac8a09f91f380185e36babeaa6330691f7cb24b Signed-off-by: Jon Loeliger <jdl@netgate.com>
2019-12-05vxlan: fix vxlan hw offload issueChenmin Sun1-1/+3
Type: fix Since Vxlan hw offload jumps the ethernet-input node, so needs to adjust the data offset accordingly In original code, the current_data is 0 when arriving vxlan-flow-input node(due to no graph node before it, except the dpdk-input), so this code block cannot find the correct vxlan header: enum { payload_offset = sizeof (ip4_vxlan_header_t) }; vlib_buffer_advance (b0, payload_offset); see code in src/vnet/vxlan/decap.c, function vxlan4_flow_input_node This patch fixes this issue Signed-off-by: Chenmin Sun <chenmin.sun@intel.com> Change-Id: Iab4af7a7dc3b69a117a4c9ea1c59662669a6438c
2019-12-05session: fix session_main_get_worker_if_validNathan Skrzypczak1-1/+1
Type: fix Change-Id: Ie024792015f3c9c52102c9be03da63c79f3456af Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2019-12-05gso: add protocol header parserMohsin Kazmi6-90/+149
Type: feature Change-Id: I7c6be2b96d19f82be237f6159944f3164ea512d0 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>