Age | Commit message (Collapse) | Author | Files | Lines |
|
- use types on the DHCP API so that the same data is sent in comfing messages and in dumps
- add the DHCP client dump API
- update VOM to refelct API changes
- rename VOM class dhcp_config* dhcp_client*
- the VOM dhcp_client class maintains the lease data (which it reads on a dump) for clients to read
Change-Id: I2a43463937cbd80c01d45798e74b21288d8b8ead
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: I86019f4ff9b0c8c633638fa23341d8ce49099ba6
Signed-off-by: John Lo <loj@cisco.com>
|
|
- Modify the API send_ip6_na and send_ip4_garp to take sw_if_index instead
of vnet_hw_interface_t and add call to build_ethernet_rewrite to support
subinterface/vlan
- Add code to bonding driver to send an event to bond_process when the first
interface becomes active or when the active interface is down
- Create a bond_process to walk the interface and the corresponding
subinterfaces to send garp/ip6_na when an event is received.
- Minor cleanup in bonding/node.c
Note: dpdk bonding driver does not send garp/ip6_na for subinterfaces. There is
no attempt to fix it here. But the infra is now done and should be easy to
add the support.
Change-Id: If3ecc4cd0fb3051330f7fa11ca0dab3e18557ce1
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: I9e759037295fe675abe426e565a562b1ec1e7d33
Signed-off-by: Jerome Tollet <jtollet@cisco.com>
|
|
DBGvpp# sh bier disp entry
DBGvpp# sh bier disp entry 0
No such BIER disp entry: 0
DBGvpp# sh bier disp table
DBGvpp# sh bier disp table 0
No such BIER disp table: 0
DBGvpp# sh bier disp table 11
No such BIER disp table: 11
DBGvpp#
DBGvpp# sh bier bift
no BIFT entries
DBGvpp# sh bier bift set 0
no BIFT entries
DBGvpp# sh bier bift set 0 sd 0 bsl 0
no BIFT entries
DBGvpp#
DBGvpp# sh bier fib
No BIER tables
DBGvpp# sh bier fib 0
DBGvpp# sh bier fib 0 4
DBGvpp# sh bier fmask
DBGvpp# sh bier fmask 2
No BIER f-mask 2
DBGvpp# sh bier imp
DBGvpp# sh bier imp 0
No such BIER imposition: 0
Change-Id: Ibadac3441dd8a6d1b96bd9ee4358e28498875b95
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
"sh run" says the number of clocks for my tcp based throughput test
dropped from ~43 to ~23
Change-Id: I719439ba7fc079ad36be1432c5d7cf74e3b70d73
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ia8ef019742c13b1149916d51796cad6f50687162
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ide1f76e9207b6022d5258a119f8d59cca85651b5
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Avoids recomputing the fib index in ip local for locally delivered
packets and should incur no extra cost when forwarding packets.
Change-Id: Id826ffa8206392087327f154337eabc8a801b4d7
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Id97de732b5952d5d86202e7749c9e81cf8dbed87
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
If the caller is the session owning thread or the main thread with a
worker barrier sync (cli/api) add an event to the pending disconnects
vector in the session node and entirely avoid using the event queue.
Useful for bursts of disconnects (like an app detach).
If disconnects come from a processes, be willing to retry enqueueing the
disconnect to the event queue multiple times.
Change-Id: Ieece1f1091b713f94c41c703b6e805bc8498816a
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Improve deletion of L2FIB MAC entry using l2fib_add_del API. If
sw_if_index param specified in th API is non-zero, check that its
value match that of the MAC entry to proceed with deletion.
Improve "show l2fib" CLI to allow display of all entries, learned
entries only, or added ovia CLI/API entries only. For added entry,
show "no" under the age column to indicate entry does not age.
Change-Id: I0bd2582c2b6bac268e551e4f8ca6dab2be4400ad
Signed-off-by: John Lo <loj@cisco.com>
|
|
Change-Id: I5e29e16b4d45411b1a7c177b8d7156c5baefe6a1
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
This api only supports default tables but v6 and v4 default tables are
different.
Change-Id: I7fe39251af99082278e84d7411511bdeca34e609
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: If37d644a26132c42a04927f612eec5e891066451
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I00fc4a4553dabed7ef099227b8253ed4916ea5e4
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ibab5e27277f618ceb2d543b9d6a1a5f191e7d1db
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I8d8ecc80edb7665125ba625a3ce7b30d2dea88f0
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Cause: EVP_MD_CTX object used but not initialized.
Change-Id: I390b2acf580f16415685563fa52e56717efc7be7
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
|
|
Change-Id: I4cc6a20b69cce2aa52768a27c5d455eb098224c8
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I84327197d59c72d0d046dd2cb4071bf74af6fc28
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Move handling of IP neighbor pool full into main thread on entry
creation and make sure static entriesare not deleted for reuse.
Fix IPv6 neighbor handling on interface down and up so that static
entries are not deleted.
Change-Id: I073794949a41a5b86201e519ebe479febfc506c8
Signed-off-by: John Lo <loj@cisco.com>
|
|
Change-Id: I1773d962b373693a737d39c0c97e8c53eb91545a
Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
|
|
Gain is around 6 clocks per packet (22 to 16).
Change-Id: Ia6f4293ea9062368a9a6b235c650591dbc0707d0
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Old code ~25 clocks/packet, new ~10.
Change-Id: I202cd6cbafb1ab2296939634d674f7ffd28253fc
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
the ip4-dhcp-client-detect feature MUST run prior to nat44-out2in, or
inbound dhcp broadcast packets will be dropped. Certain dhcp servers
answer lease renewal dhcp-request packets with broadcast dhcp-acks, leading
to unrecoverable lease loss.
In detail, this constraint:
VNET_FEATURE_INIT (ip4_snat_out2in, static) = {
.arc_name = "ip4-unicast",
.node_name = "nat44-out2in",
.runs_after = VNET_FEATURES ("acl-plugin-in-ip4-fa"),
};
doesn't get the job done:
ip4-unicast:
[17] nat44-out2in
[23] ip4-dhcp-client-detect
[26] ip4-not-enabled
Add a proper constraint:
VNET_FEATURE_INIT (ip4_snat_out2in, static) = {
.arc_name = "ip4-unicast",
.node_name = "nat44-out2in",
.runs_after = VNET_FEATURES ("acl-plugin-in-ip4-fa",
"ip4-dhcp-client-detect"),
};
and the interface feature order is OK, at least in this regard:
ip4-unicast:
[17] ip4-dhcp-client-detect
[18] nat44-out2in
[26] ip4-not-enabled
We need to carefully audit (especially) the ip4-unicast feature arc,
which has [gasp] 37 features on it!
Change-Id: I5e749ead7ab2a25d80839a331de6261e112977ad
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: Ic1fab1f3aba92bbdbfd281459562d1f9697ab465
Signed-off-by: John Lo <loj@cisco.com>
|
|
- fix newreno cwnd computation
- reset snd_una_max on entering recovery
- accept acks beyond snd_nxt but less than snd_congestion when in
recovery
- avoid entering fast recovery multiple times when using sacks
- avoid as much as possible sending small segments when doing fast
retransmit
- more event logging
Change-Id: I19dd151d7704e39d4eae06de3a26f5e124875366
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Should cost at most 1 clock per frame when not enabled.
Add "pcap rx trace..." debug CLI, refactored "pcap tx trace" debug CLI
to avoid duplicating code.
Change-Id: I19ac75d1cf94a6a24c98facbf0753381d37963ea
Signed-off-by: Dave Barach <dbarach@cisco.com>
|
|
Replace clib_warning with vlib_log_warn
Change-Id: I6d0b8d97048b75f4418609264af0c14e19fad79b
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Thanks to Ning Li <muziding001@163.com> for reporting.
Change-Id: I758bc6760ec5a9ec688172bc162a1873f96ab4f3
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
- hash is great. But it is a bit too slow for the DP. Use direct array indexing
to quickly retrieve the slave interface.
- the algorithm used by flow hash is great. But it is a bit too slow for the DP.
Use l2_hash_hash() extracted from lb_hash.h which ECMP is using. It makes use
of intrinsic crc32 instruction set.
- shortcut modulo arithmetic when the operand is 2**x (where x up to 4) to
avoid division instruction.
- special case for link count == 1 in bond_tx_fn()
- use clib_mem_unaligned to access data for the packet to avoid alignment error
- Fix some typos for packet tracing.
Change-Id: I8eae3ad497061c5473aa675ba894ee0211120d25
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: I8335ebf266becf2f42bb3f28a17dfed8d9b08f97
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Add support for either copying TOS/TC from inner packet to outer,
or set to fixed value.
Change-Id: I716a95f875349acec94317b266c8cf9f2f81a785
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: I8cbd1eac80ae4aeb173d02786e9ccf3b4877304d
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Fix GRE/IPv6 setting of ip->payload_length (which has never worked).
Change-Id: Ie68f1cc7bbb70489d6ec97356132c783f2345e1e
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: I7a4133c59ff45b0744b48e246a049d9f015026fc
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Note: The Python, Java and C/C++ bindings must be updated before ip/ip_types.api can be used.
ip_types.api:
typedef ip4_address {
u8 address[4];
};
typedef ip6_address {
u8 address[16];
};
enum address_family {
ADDRESS_IP4 = 0,
ADDRESS_IP6,
};
union address_union {
vl_api_ip4_address_t ip4;
vl_api_ip6_address_t ip6;
};
typedef address {
vl_api_address_family_t af;
vl_api_address_union_t un;
};
Change-Id: I22f67092f24db5bd650a03c6f446a84cd9fd1074
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: I6615bb612bcc3f795b5f822ea55209bb30ef35b5
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Replace hash with a vector to improve performance.
Plus other minor performance improvements.
Change-Id: I3f0ebd909782ce3727f6360ce5ff5ddd131f8574
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
|
|
Change-Id: I37705fb572045f42be4c2dabbd8460c8f8872167
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Remove functions which have native C equivalent (i.e. _is_equal can be
replaced with ==, _add with +)
Add SSE4.2, AVX-512 implementations of splat, load_unaligned, store_unaligned,
is_all_zero, is_equal, is_all_equal
Change-Id: Ie80b0e482e7a76248ad79399c2576468532354cd
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I4f245fd225bcc563fafee2696cd039477d661c57
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: If01400e3434b25b2da36ba28ceb8444b216d0e38
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: I44278dea2ee1daa147b0928bfe26e861907a209f
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
Change-Id: I8c64a0d2f757d96ffa7fd042c23b0d814217c215
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Add a session process node that handles main thread tx and retransmit in
order to avoid having a polling input node.
Change-Id: I3357e987c023a84b533b32793e37ab4204420f64
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Idff55a19d27fed0d57e222f38d2e16c5367911cb
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
vnet_feature_enable_disable_with_index() checks the
return status of vnet_config_{add,del}_feature().
If the config string heap index returned is the same
index that was in use prior to the add/delete, it is
concluded that a failure occurred and processing of
the feature stops.
Sometimes the config index that is returned
can legitimately be the same index that was in used
before the add/delete. The old list of features can
have its heap entry deallocated before a new entry for
the new list is allocated. The heap entry for the new
list can be the entry that was deallocated while
deleting the old one.
Make vnet_config_{add,del}_feature() return ~0 on
failure. Look for that return value as an indication
that an error occurred in
vnet_enable_disable_feature_by_index().
Change-Id: I88bb3ff88a76971c1b5e5ece74784ce8ba78373c
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Add default route to the VRF table in which the interface is bound.
Add missing pool_put.
Change-Id: Id76c7dbfbf9bcf18357f372f3eee9b931df1995e
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|