Age | Commit message (Collapse) | Author | Files | Lines |
|
This module implement Python access to the VPP statistics segment. It
accesses the data structures directly in shared memory.
VPP uses optimistic locking, so data structures may change underneath
us while we are reading. Data is copied out and it's important to
spend as little time as possible "holding the lock".
Counters are stored in VPP as a two dimensional array.
Index by thread and index (typically sw_if_index).
Simple counters count only packets, Combined counters count packets
and octets.
Counters can be accessed in either dimension.
stat['/if/rx'] - returns 2D lists
stat['/if/rx'][0] - returns counters for all interfaces for thread 0
stat['/if/rx'][0][1] - returns counter for interface 1 on thread 0
stat['/if/rx'][0][1]['packets'] - returns the packet counter
for interface 1 on thread 0
stat['/if/rx'][:, 1] - returns the counters for interface 1 on all threads
stat['/if/rx'][:, 1].packets() - returns the packet counters for
interface 1 on all threads
stat['/if/rx'][:, 1].sum_packets() - returns the sum of packet counters for
interface 1 on all threads
stat['/if/rx-miss'][:, 1].sum() - returns the sum of packet counters for
interface 1 on all threads for simple counters
Type: refactor
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I1fe7f7c7d11378d06be8276db5e1900ecdb8f515
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Type: improvement
Change-Id: If3b44682e5bbf68b83adc12fb6c71899aecf8a98
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Change-Id: I56dadb852f63da0597ddf4db395a22afdf2d9cc0
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Change-Id: I58a7d75da2db0ec84c7c1f08fd1ca7a72946f14d
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Don't switch nodes from interrupt to polling state unless adaptive mode
flag set. For starters, flag set only on interface input nodes
with no polling rx queue and at least one in adaptive mode.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ica1c75f605ead82b7cf74c45c6a774461008f054
|
|
Type: improvement
Change-Id: I46459a0c0a79677092aa9f8c92b67c0d06f7242e
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
- the CLI was broken when a nh-table-id was present, since it overwrote
the next-hop address
- bouncing interface state stacked the adjacencies on the tunnel's
destination (which is all zeros)
- don't crash in the switch path if the interface has no hw-address
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I1ba9fdc9b2185899b753a2d40f23afa847a3ef4f
|
|
VppTestCase now has vpp_worker_count property set to number of workers.
This can be overriden by child classes. Also overriden by
VPP_WORKER_CONFIG variable for legacy reasons.
Type: improvement
Change-Id: Ic328bacb9003ddf9e92815767653bd362aa7f086
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: improvement
Signed-off-by: Drenfong Wong <drenfong.wang@intel.com>
Change-Id: Ia81aaa86fe071cbbed028cc85c5f3fa0f1940a0f
|
|
Type: improvement
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Ic17096c80fbde89f9bb74c29256abbe845130992
|
|
Type: improvement
This patch adds flags to represent the modern NICs capabilities.
Change-Id: I96d38d9ab7eac55974d72795cd100d8337168e1e
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: fix
Signed-off-by: Ivan Shvedunov <ivan4th@gmail.com>
Change-Id: I3fdc1711d508bc5b0c2f56b3bd3fb4a56056eb54
|
|
Type: feature
an client can dump the existing sources, examine their
priorities, then define thier own source.
Usefull if a client wants to distingusih between say, static,
ospf, bgp, etc routes it has added over the API.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I5158b4fa1ebe87381ff8707bb173217f56ea274a
|
|
Change-Id: Ia304488900bd9236ab4e7cc6f17ae029ee6f2c00
Type: fix
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
|
|
Fix bug in crcchecker. It must be possible to remove a non-production
.api file
Type: improvement
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I00b953e58017cc53051e6f4d8a70403dce8219a0
|
|
Type: improvement
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I9e65c94a5a05047a5104e9361ea36eac77b40442
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: I20e48a5ac8068eccb8d998346d35227c4802bb68
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
Type: feature
|
|
Unlocking previeous fib/mfib table before bind it to a new.
Currently if rebind interface table from one to another,
previous table's lock wouldn't decrease the locks count.
Type: fix
Change-Id: I09340baf1c7039aed3be15ee231eded7364b213e
Signed-off-by: Dmitry Vakrhushev <dmitry@netgate.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I6ed2104e9d79c367ca36460047586f9b632c3315
|
|
It allows default variant selection from startup.conf
Type: improvement
Change-Id: Idff95e12dd0c105dab7c905089548b05a6e974e0
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
API marked for deprecation last year due to non-inclusive language.
Last supported release: 21.01. See the "adl" plugin.
Type: improvement
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I931e58ced9cc8403ca5b23fd6b07e50d0ff7306b
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I316575a4b199916920cad6be8f9b49025d6ccc2d
|
|
Type: fix
Change-Id: I77723dcbf753c2a7f1ec00f034d8ab604f12214b
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Make sure packet lands on the right thread for dst nat case.
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I0ec4e4c2bb3fa80ff73fac588c36d36420ba68fa
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I24225ada6623c5b5543341ecac0d6c1db43cc8a9
|
|
Type: refactor
Change-Id: I02a527f57853ebff797f0d85761b71127916d6ce
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Ib01ed3231321f0f38c4b1deb885c4cf718cc0147
|
|
It naturally belogns there...
Type: refactor
Change-Id: I05f7ba01103a5e9b3756f1ea69c8cc5d8f26f0a0
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Coverity complains that the statement
if (!e)
return -1;
is never true and is logically dead code in the subject function. It is
right. e is assigned in both the if and else statementes immediately above
and can never be null.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: Ic2d0e76eff696ee689a68a07913876dcecf5c647
|
|
Type: feature
This feautre only applies to ESP not AH SAs.
As well as the gobal switch for ayncs mode, allow individual SAs to be
async.
If global async is on, all SAs are async. If global async mode is off,
then if then an SA can be individually set to async. This preserves the
global switch behaviour.
the stratergy in the esp encrypt.decrypt nodes is to separate the frame
into, 1) sync buffers, 2) async buffers and 3) no-op buffers.
Sync buffer will undergo a cyrpto/ath operation, no-op will not, they
are dropped or handed-off.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Ifc15b10b870b19413ad030ce7f92ed56275d6791
|
|
Type: improvement
In the current scheme an async frame is submitted each time the crypto
op changes. thus happens each time a different SA is used and thus
potentially many times per-node. thi can lead to the submision of many
partially filled frames.
change the scheme to construct as many full frames as possible in the
node and submit them all at the end. the frame owner ship is passed to
the user so that there can be more than one open frame per-op at any
given time.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Ic2305581d7b5aa26133f52115e0cd28ba956ed55
|
|
Type: feature
Change-Id: I9d4f90bc701d2b9b903a018f8d27cec5e129d7be
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Coverity complans the line
h = hashes;
uses uninitialized variable if the prior ASSERT statement is hit.
ASSERT is compiled out coverity as well as in release image. So the
complain is legitimate. Change the ASSERT to drop the frame and log
an error instead.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: Ibf0c204fe3626afca69ea84484e606566cf3244c
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ib5395a51fbfb2123549f7c96534fa763b4669243
|
|
If no pcap filters have ever been configured and we try to enable pcap
capture with a filter, cm->classify_table_index_by_sw_if_index is not
initialized yet.
Type: fix
Change-Id: I2f509c58f9984951b1ad81c1c8ed912cb594fce1
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
This fix the classify filter if we attach several different filters.
This also fix some issues with l3 and l4 parsing.
Type: fix
Change-Id: I9dc6c55049a3bbc0110d1097b40d9da27633626b
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I4e00dd7f8ce1e56092dde9a073decae62d5475de
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I52aa2322980b51cfc0b282fb37d7f63d30777dee
|
|
Type: improvement
Change-Id: I8322bca1a9aa75c97c0fe2ff24b2f65fc43242ce
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: fix
Change-Id: Ie89663de42ec94823b32aa1edf94f2c03df06627
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: fix
Change-Id: Iebe2db66af1e769486a117d6284375ce5ffff0b4
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: refactor
this allows the ipsec_sa_get funtion to be moved from ipsec.h to
ipsec_sa.h where it belongs.
Also use ipsec_sa_get throughout the code base.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I2dce726c4f7052b5507dd8dcfead0ed5604357df
|
|
Fixes coverity issue CID 218445 (#1 of 1): Logically dead code
(DEADCODE) dead_error_line: Execution cannot reach this statement:
return 4294967295U;.
Type: fix
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
Change-Id: Ibf8ee0458320d20c3adca2efa2a4bfad7c190dbe
|
|
Type: test
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Iabc8f2b09ee10a82aacebd36acfe8648cf69b7d7
|
|
Type: refactor
- remove the extern declaration of the nodes. keep the use of them to
the files that declare them
- remove duplicate declaration of ipsec_set_async_mode
- remove unsued ipsec_add_feature
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I6ce7bb4517b508a8f02b11f3bc819e1c5d539c02
|
|
Make the ipsec[46]-tun-input nodes siblings of device-input so that
input features can be enabled on them. Register ipsec-tun for feature
updates. When a feature is enabled on the device-input arc and the
ifindex is an IPSec tunnel, change the end node of the arc for that
ifindex to be the appropriate ESP decrypt node. Set a flag on the
tunnel to indicate that the feature arc should be started for packets
input on the tunnel.
Test input policing on ESP IPSec tunnels.
Type: improvement
Signed-off-by: Brian Russell <brian@graphiant.com>
Change-Id: I3b9f047e5e737f3ea4c58fc82cd3c15700b6f9f7
|
|
Type: improvement
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: Ic25ffe9c8e37826733cfb9e62cefb491bb3322bc
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I755e6da1fcf6f3bf3c72d6d36c4243b0919b7209
|
|
The move from ip4(6)_src_address_for_packet to fib_sas4(6)_get changed
the behavior, so that the new looked only to adjacent gleans. This
caused a problem for destinations routed according to FIB table.
To reproduce:
vpp# create tap
vpp# set interface state tap0 up
vpp# set interface ip address tap0 192.168.11.1/24
vpp# ip route add 192.168.20.0/24 via 192.168.11.2
linux$ sudo ip addr add 192.168.20.1/24 dev lo
linux$ sudo ip link set tap0 up
linux$ sudo ip addr add 192.168.11.2/24 dev tap0
vpp# ping 192.168.20.1
Failed: no source address for egress interface
Type: fix
Signed-off-by: Július Milan <julius.milan@pantheon.tech>
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I22899f4dbbf8c1c85ccce72f801b92c183195b5d
|
|
Type: improvement
Also:
- state as enum so my GDB life is easier
- typo; s/indice/indices/;
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I3320f5ef1ccd7d042071ef336488a41adfad7463
|