Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: fix
harmless this time since it only affects the debug statement, but
it still crashes an ASAN image.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Ie02e7fe3014b98b9f8c83447f59017a380ab3948
|
|
Type: feature
Change-Id: I7e619040857310fffd33c355f6c491a55f7a4a02
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: feature
In ethernet_input_inline(), when verifying that the destination
mac address on a received packet matches the mac address of the
interface where the packet was received, check the secondary
addresses on the interface if the primary address does not match.
This was done previously for eth_input_single_int().
Change-Id: I45716184dd789d83852271f9c79cedf5f6cbf75b
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: feature
from the API doc, a table replace is:
"
The use-case is that, for some unspecified reason, the control plane
has a very different set of entries it wants in the table than VPP
currently has. The CP would thus like to 'replace' VPP's current table
only by specifying what the new set of entries shall be, i.e. it is not
going to delete anything that already eixts.
the CP delcartes the start of this procedure with this begin_replace
API Call, and when it has populated all the entries it wants, it calls
the below end_replace API. From this point on it is of coursce free
to add and delete entries as usual.
The underlying mechanism by which VPP implements this replace is
purposefully left unspecified.
"
In the FIB, the algorithm is implemented using mark and sweep.
Algorithm goes:
1) replace_begin: this marks all the entries in that table as 'stale'
2) download all the entries that should be in this table
- this clears the stale flag on those entries
3) signal the table converged: ip_table_replace_end
- this removes all entries that are still stale
this procedure can be used when an agent first connects to VPP,
as an alternative to dump and diff state reconciliation.
Change-Id: I168edec10cf7670866076b129ebfe6149ea8222e
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
check the return result from fcntl, and if error, behave
the same way the expansion of _IOCTL macro does.
Type: fix
Change-Id: I6d537d1bdedae64470612aef64b46e07387fe84b
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Type: fix
Change-Id: I36558b67d38266def9dfe45777d9757a33ce2569
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: fix
Change-Id: Icc8cd05cb9c1844a9f8b0399797ad554f4ccf1a1
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
If an arc declaration includes '.last_in_arc = "some-node"', assume
that folks mean it and add explicit ordering constraints.
Fix the "arp" arc declaration which claimed that the arc ends at
arp-disabled, but the arc really ends at error-drop.
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Ie2de1fb30091671cbc7c62770903a2e05987f141
|
|
Add PAPI support for VppTypeAlias decaying to BaseType.
E.g vl_api_interface_index_t sw_if_index [default=0xffffffff]
Type: feature
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I2061392157c9c11fbb0ff9e5406ea65489b017e9
|
|
IPsec writes trailing data at the end of the buffer without checking
if there is enough space. If the packet length equals buffer size this
leads to rewiting of the next buffer header in the pool.
Type: fix
Change-Id: Iceb27bb724c7243863a4b532aad0808051b7d74c
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: feature
Change-Id: I77b3ee74229f3c85e99f74bf9000cb5aedbc1760
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: feature
To avoid excessive bursts, pacer must be provided with an estimated rtt
for the connection. That's used to compute an idle timeout, i.e., time
after which the bucket is reset to 1 mtu due to inactivity. For now,
idle timeout is computed as 5% of the rtt.
Change-Id: Ia0b752fe7b4ad0ce97b477fb886b0133a2321541
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Finish the feature, and fix a couple of doc bugs
Type: feature
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I2c62745fda137776204c8fc4fca0e7e288051573
|
|
Type: fix
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: If41f154c354772f5b32cfd35ea231b8f59c2c0c5
|
|
Type: feature
Adding:
VNET_FLOW_TYPE_IP4_GTPC
VNET_FLOW_TYPE_IP4_GTPU
VNET_FLOW_TYPE_IP4_GTPU_IP4
VNET_FLOW_TYPE_IP4_GTPU_IP6
VNET_FLOW_TYPE_IP6_GTPC
VNET_FLOW_TYPE_IP6_GTPU
VNET_FLOW_TYPE_IP6_GTPU_IP4
VNET_FLOW_TYPE_IP6_GTPU_IP6
in this patch
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I4ad53895b5ac0771432bb039b8c79e48e3c19f25
|
|
Type: feature
Change-Id: I7dcc8c6911d02729b3bda1b3a21a211c82c3b949
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Change-Id: Ic67d9da65d937f56ecf994a5504c6351624b32ff
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: feature
Change-Id: Iac8d4ed4997c4fce802589585e6a9424957152ca
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: fix
Change-Id: I38a5cbd53b278c21142bac4ee1bbe5dc8bcaaac9
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: fix
Change-Id: I522db62db50fc0fa46a6dd7cddd32e2f09b5e5a6
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: feature
Change-Id: I7f64fb1a13d90fa1679ca2ca35206092682f0c8f
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: feature
Plug-in for IPv6 Segment Routing Mobile
This funcion was developed by
Signed-off-by: Satoru Matsuchima <satoru.matsushima@gmail.com>
Signed-off-by: Filip Varga <filipvarga89@gmail.com>
Signed-off-by: Tetsuya Murakami <tetsuya.mrk@gmail.com>
Signed-off-by: Tetsuya Murakami <tetsuya.mrk@gmail.com>
Change-Id: Ie995adc73d8f8d444339aab71619c3599e69f12d
Signed-off-by: Tetsuya Murakami <tetsuya.mrk@gmail.com>
|
|
Type: feature
For some deployments(mobile traffic) we need few extra bytes of space
Signed-off-by: Srikanth Akula <srakula@cisco.com>
Change-Id: I3367561dc23dbb8b266dea583e23b9430fd7dcab
|
|
Type: fix
Adding few extra checks while doign session validationwq!
Signed-off-by: Srikanth Akula <srakula@cisco.com>
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I4d18b5ad97d1802ce38a07aeb56b5f35939c1187
|
|
Type: fix
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I6bb6c6be62f98ac9a059469c81a5f4476b96e96e
|
|
Type: fix
Change-Id: Ia3dacd2628591f7ba9710e8e4d68df97ae21935c
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
|
|
Type: fix
Since the connection is closed, also mark the session as closed.
Change-Id: Ica3849c3ff12fa7a65ba64e563a60d6c94f5ceca
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: refactor
Change-Id: I204f3f8eebc5f5d5a377e91262f91c615fd00168
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: refactor
Change-Id: I34306c1206b2bf5f521be6c6b78074ccf9259a08
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Change-Id: I7cba9f911abe1ae82d8381a48f65e81b615ede76
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
|
|
Type: fix
all other uses of the fib_entry_get_preifx in the code base don't pass
the prefix into recursive functions.
Change-Id: Ic1c56acd406a733b215ee2fd98b6bed58b490a4f
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Fixes: 8389fb9
Change-Id: Ie159eb444b28b36a7af86049b80fba4e49be93cb
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Do not overflow ops_handlers vector.
Type: fix
Change-Id: I8d5e7fb8125a7bd87ecfe6f4f1390fb9f43dad8f
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Change-Id: I33dc4cf7b6c69f74c7bf4971ce59442678b878ef
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: refactor
Change-Id: I25f1cc3969c6a6ec1384079dc437537acd2ec152
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
This fix was first made in
commit fdea5c6a00b74971dbb1b7ec4e25839a871006ca
but was subsequently lost in
commit 053204ab039d34a990ff0e14c32ce3b294fcce0e
Added unit test for setting VTR on a non-sub-interface to
help ensure no future regressions of this ability.
Type: fix
Change-Id: I71ce2684fb72383741455829ae2d397ea2e95eae
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
Type: refactor
Change-Id: I2c6b59013bfd21136a2955442c779685f951932b
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Having session enable in config file wasn't
working for multiple workers
Type: fix
Change-Id: Ib29ba540a6e1d714e7e470f4c7518e3d266fe7ca
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: fix
Change-Id: Iea7d73a304236b525b95bdad3bfdb41e711f8cdb
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
opt_data is defined as a array, while in some code, e.g., function
vnet_crypto_get_op_type, it's used as vec.
vec api is not applicable to static arraies.
src/vnet/crypto/crypto.h:234:70: error: address of array 'cm->opt_data' will always evaluate to 'true' [-Werror,-Wpointer-bool-conversion]
vnet_crypto_op_data_t *od = ({ do { if ((0 > 0) && ! ((id) < ((cm->opt_data) ? (((vec_header_t *) (cm->opt_data) - 1)->len) : 0)))
Type: fix
Change-Id: I0b6754406e4216ca975bc1da4b5d4ce293a9bb45
Signed-off-by: Lijian Zhang <Lijian.Zhang@arm.com>
|
|
Type: feature
- retransmit first unacked segment if newer retransmitted packets
are acked
- avoid spurious retransmits if recovery ends with sacked bytes
Change-Id: Ic1b56d22e025822edb7609afb136e47440ea6032
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
This provides a functional interface to IP fragmentation.
Allowing external features to fragment. Supports
arbitrary encap size, for e.g. MPLS or inner fragmentation
of tunnels.
This also removed dual loop in MAP that was fundamentally broken.
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Ia89ecec8ee3cbe2416edbe87630fdb714898c2a8
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Autoconfigure router advertisements for delegated prefixes.
Clean up a longstanding issue. If vpp receives a dhcpv6 renew reply,
do NOT reset per-delegated-prefix timers. That prevented vpp from
sending a solicit to renew the delegation on time. That, in turn
caused the RA code to send advertisements with valid_time =
preferred_time = 0. That causes almost any downstream client to throw
away its delegated address.
Miscellaneous changes
o src/vnet/ip/ip6_neighbor.c - always memset elements allocated from pools
to zero. DGMS.
o Remove debug spew from the ipv6 connection-tracker plugin
Type: feature
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I428feccdc47efdc413898600e0d62916928a6eb7
|
|
Type: fix
Change-Id: I7416e827fbc5c63d082273656441c81dd6246d8a
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: fix
Change-Id: Ib6a8f5ca597389700e5746f089a5cec7eee65ab5
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
APIs for dedicated IPSec tunnels will remain in this release and are
used to programme the IPIP tunnel protect. APIs will be removed in a
future release.
see:
https://wiki.fd.io/view/VPP/IPSec
Type: feature
Change-Id: I0f01f597946fdd15dfa5cae3643104d5a9c83089
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: feature
Change-Id: I402f4c88dee70fbb0b3b61dc4e0a4034d24d8b56
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Change-Id: I38ee9efd23774cce7790565825527cca9ba6f200
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Change-Id: Ia18632c8fe22bdcfdf3cb48a4234f8703a7ac1d7
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: style
Change-Id: If28a4959c1d60ab1caf22dbc8b72d9adf7060bd4
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|