Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: improvement
Ethernet frames on the wire are a minimum of 64 bytes, so use the length in the UDP header to determine if the ESP payload is one bytes of the special SPI, rather than the buffer's size (which will include the ethernet header's padding).
In the case of drop advance the packet back to the IP header so the ipx-drop node sees a sane packet.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Ic3b75487919f0c77507d6f725bd11202bc5afee8
|
|
Type: improvement
When the adj subsystem is notified of a BFD session, it attempts to find the appropriate adjacency from the session's key.
This could lead to a mismatch between the adj used by BFD and that of FIB. The BFD session stores the adj it is using, so FIB uses that instead.
Since adj is now using the same adj as BFD, it does not need to maintain its own locks.
In BFD it is necessary to initialise the adj index used in INVALID and ensure it is not unlock before listeners are notified of the session delete.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I9630867b10bb18969475299a0c754942a8df0f44
|
|
Type: fix
The adjacency used is then the same one as that used by routes in the FIB and so the BFD protection/fast-failover works for thise route, since they are children of the BFD protected adjacency.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I72e10b3074697cba8a002a4c1acf690983985157
|
|
When the ipfix address was changed to be an ip_address instead of
an ip4_address the output when creating an exporter via the cli
should have been modified to take the address of the v4 part of
the addr.
Type: fix
Signed-off-by: Paul Atkins <patkins@graphiant.com>
Change-Id: I141456cd9092c861a4c4aefba4035dbde23efcd6
|
|
Fix for the crash when both crypto_native_plugin and DPDK QAT
are enabled in startup conf.
Type: fix
Signed-off-by: mgovind <govindarajan.mohandoss@arm.com>
Change-Id: Ib020ed7130a99080a093c70c06d47bcacd6d23b1
|
|
Type: refactor
IP4 does not depend on TCP (it's the other way around).
This upside down dependency leads to some nasty circular includes when trying to use ip46_address.h in interface.h
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I4a1bd21543b08b9c1cf1e5563da738414734a878
|
|
Add udp total session counts - as stat segment entries:
/bfd/udp4/sessions
/bfd/udp6/sessions
and per session packet/byte counters:
/bfd/rx-session-counters
/bfd/rx-session-echo-counters
/bfd/tx-session-counters
/bfd/tx-session-echo-counters
These counters are per-thread and per-session id.
Adjust tests to verify proper function.
Type: refactor
Signed-off-by: Klement Sekera <klement.sekera@gmail.com>
Change-Id: Ie597928022b6ac74c2220019b9e8e1714295f170
|
|
This change fixes multiple unused parameter warnings, narrowing
conversion warnings and identical switch statement warnings.
Type: refactor
Signed-off-by: Klement Sekera <klement.sekera@gmail.com>
Change-Id: I4140e939c409ce06cc5aaaf5e1b042681f7ca448
|
|
Type: fix
Signed-off-by: Rajith P R <rajith@rtbrick.com>
Change-Id: I8c9c85081c27bfe7ee71b5b620a2a761e027789c
|
|
Makes it similar to connects.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I38c328670054e1a9ba4dc4ea8fe7519a5a09e8be
|
|
Special bitmaps with VLIB_FRAME_SIZE bits.
Type: improvement
Change-Id: I48747e422e519e7b5e930fa720397459d3adbb8e
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: test
The FIB UT fails in debug mode because there is no string associated woth its fib_node_type_t.
Change the tests to register their own type, which will give it a name.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I36e546718faa7241c088494cbae10939aca51d5a
|
|
Half-opens are only allocated from main with worker barrier but can be
cleaned up, i.e., session_half_open_free, from main without a barrier.
In debug images, the free_bitmap can grow while workers peek the
sessions pool, e.g., session_half_open_migrate_notify, and as a result
crash while validating the session. To avoid, proactively grow bitmap in
debug images.
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I2410793f933fb638651fe8dc08ba78e9bee0bd77
|
|
ip6 and mpls fib_table->ft_locks memory leaked when the table is
deleted.
name tag is leaked for mpls table parsing.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: Ife68c0ddc3a6f9437a149b308310f042799c2116
|
|
Type: improvement
helps keep the agents stateless
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I3588f13c081e24f5a8083b490eb02856361e4ccb
|
|
IGMP packets with Router Alert option are delivered to ip4-local
without going through ip4-lookup. Make sure fib_index is initialized
properly.
Type: fix
Change-Id: Iab090a33c4c759b6d7f68c28a0b3f4da7a9de864
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Also reset send params flags before calling transports to avoid explicit
resets in all transports.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I1da7b3fab009728e7fee4199425ced933fa8a122
|
|
This also changes the behavior of the nat44-ei hairpinning feature.
Rather then enabling the feature on every nat interface, it is enabled
only on local0.
Type: improvement
Signed-off-by: Filip Varga <fivarga@cisco.com>
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I4e16a83c9e328aa75fc61df508b620ef743ca775
|
|
The BFD delayed auth change test was failing intermittently within CI.
Debugging has shown it depends on the initial random seed, e.g. the below
will consistently fail:
RND_SEED=1643734669.7126195 TEST='bfd.BFDAuthOnOffTestCase.test_auth_change_key_delayed'
Same thing will happen with:
RND_SEED=1643736595.1363552
RND_SEED=1643722239.8224792
The analysis of the behavior shown that the function that is doing the hash verification,
modifies the content of the packet for the purposes of hash computation.
In case of the auth rollover, this function may be called twice - resulting in the second
comparison to be made with a bogus packet data, thus failing the check and the test.
The above values of random seed are the ones where the test makes it
to the point of this double comparison.
The solution is to restore the data within the packet after the check from the array
where we have copied it into before modifying the packet.
Change-Id: Ibb09beb4b1230032db04527bbf38fa335651866b
Type: fix
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Type: fix
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I3265d4a3843b07c2e0050e297f1e014fc5b31cf7
|
|
Coverity complains the expression, j % vif->num_txq, may encounter
divide by zero. While there is little chance that vif->num_txq is
zero, it is easy to prevent divide by zero if vif->num_txq is ever
zero.
Type: fix
Fixes: I337ec63d0868f665329d68eadf1744e080b73a0d
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I2e91f296737ce266ab70fffc1f442cc600724fa2
|
|
Add API to disable full reassembly of "forus" packets. Mark packets
passing through ip[4|6]-local nodes with a new buffer flag and check for
that flag in reassembly.
Enable IP6 "forus" full reassembly by default to be consistent with
existing IP4 setting.
Type: improvement
Change-Id: I7067792fcd4304182654237968e4c4d9293c6143
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Replace unconditional usage of
buffer->total_length_not_including_first_buffer with a logic checking
whether that length is set to a valid value.
Type: fix
Fixes: 17478e4eb81d384f171ca27c9110a051cd434f16
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I161d0957d62cc23826edd821aa5560bcfc5c1a33
|
|
Initialize ip6 memory owner thread index in reassembly context to avoid
unnecessary handovers.
Type: fix
Fixes: 630ab5846bceddf8d663e9f488a2dc0378949827
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I2996caf1f82a0649c97d481b74dce24a96dce326
|
|
- move bonding hash functions to vnet/hash
- register the corresponding hash function when the bond interface
is created
- remove floating point vec256 usage
- split bond_tx_inline into bond_tx_hash and bond_tx_no_hash
Type: refactor
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I1698023c48470290d11c9b2bd00996eee9aa079d
|
|
Type: fix
policer_add_del does not free "clib_error_t*" when it is not null.
Signed-off-by: Leung Lai Yung <benkerbuild@gmail.com>
Change-Id: I00ad8e53797e46adeb1819856262bb9f3c068c63
|
|
Remove dead code. Pool element cannot be NULL.
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I7812efdcdc414af8352474c4e527c878d2e2c459
|
|
Restructure code to avoid NULL dereference.
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: If3a4319f1b93af272b7b315a9b15ba4ee1f8e7ae
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: If9d6153ddce836ec34842fb5e581b2f4565e33df
|
|
Instead of constantly scanning all transport vfts for update time
functions, build list at transport enable time.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Id5c07cc03ee1fdd072ebbbd40119d1a440a5e3b1
|
|
Originally wireguard doesn't support async mode for encryption packets.
This patch add async mode for encryption in wireguard and also adds
support chacha20-poly1305 algorithm in cryptodev for async handler.
In addition it contains new command line to activate async mode for wireguard:
set wireguard async mode on|off
and also add new command to check active mode for wireguard:
show wireguard mode
Type: improvement
Signed-off-by: Gabriel Oginski <gabrielx.oginski@intel.com>
Change-Id: I141d48b42ee8dbff0112b8542ab5205268089da6
|
|
Type: fix
Change-Id: Idefded3443b383ba916a66051b003aac106af8e8
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Basic HTTP/1.1 server side implementation.
Type: feature
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I06bddaf7f11e28db802b4cd7ef8160c78cb019b6
|
|
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I8ea0193ebb2a721a0582451ffd64c4063ac6d233
|
|
Type: fix
During the interface creation time, (by default) admin-up
flag is locally set for tap and virtio interfaces.
While, in VPP the state of these interfaces are still
admin-down. User needs to explicitly call
'set interface state <interface-name> up' to admin-up the
newly created tap or virtio interface(s) in VPP. So, this
behavior is inconsistent.
This patch fixes the issue to have consistent behavior
for given interface between local and global administration
state.
Change-Id: Ifd8904a09fbdbe7b386874ac3231dc0527064518
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: improvement
Change-Id: I3659de6599f402c92e3855e3bf0e5e3388f2bea0
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
When an IPSec interface is first constructed, the end node of the feature arc is not changed, which means it is interface-output.
This means that traffic directed into adjacencies on the link, that do not have protection (w/ an SA), drop like this:
...
00:00:01:111710: ip4-midchain
tx_sw_if_index 4 dpo-idx 24 : ipv4 via 0.0.0.0 ipsec0: mtu:9000 next:6 flags:[]
stacked-on:
[@1]: dpo-drop ip4 flow hash: 0x00000000
00000000: 4500005c000100003f01cb8cac100202010101010800ecf40000000058585858
00000020: 58585858585858585858585858585858585858585858585858585858
00:00:01:111829: local0-output
ipsec0
00000000: 4500005c000100003f01cb8cac100202010101010800ecf40000000058585858
00000020: 5858585858585858585858585858585858585858585858585858585858585858
00000040: 58585858585858585858585858585858585858585858585858585858c2cf08c0
00000060: 2a2c103cd0126bd8b03c4ec20ce2bd02dd77b3e3a4f49664
00:00:01:112017: error-drop
rx:pg1
00:00:01:112034: drop
local0-output: interface is down
although that's a drop, no packets should go to local0, and we want all IPvX packets to go through ipX-drop.
This change sets the interface's end-arc node to the appropriate drop node when the interface is created, and when the last protection is removed.
The resulting drop is:
...
00:00:01:111504: ip4-midchain
tx_sw_if_index 4 dpo-idx 24 : ipv4 via 0.0.0.0 ipsec0: mtu:9000 next:0 flags:[]
stacked-on:
[@1]: dpo-drop ip4 flow hash: 0x00000000
00000000: 4500005c000100003f01cb8cac100202010101010800ecf40000000058585858
00000020: 58585858585858585858585858585858585858585858585858585858
00:00:01:111533: ip4-drop
ICMP: 172.16.2.2 -> 1.1.1.1
tos 0x00, ttl 63, length 92, checksum 0xcb8c dscp CS0 ecn NON_ECN
fragment id 0x0001
ICMP echo_request checksum 0xecf4 id 0
00:00:01:111620: error-drop
rx:pg1
00:00:01:111640: drop
null-node: blackholed packets
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I7e7de23c541d9f1210a05e6984a688f1f821a155
|
|
- per hw-interface-class handlers
- ethernet set_mtu callback
- driver can now refuse MTU change
Type: improvement
Change-Id: I3d37c9129930ebec7bb70caf4263025413873048
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Decouples vnet return values from API return codes.
New vnet_error() creates vnet_error_t whicgh contains both vnet function
return value and return string.
vnet_api_error() converts vlib_error_t constructed with vnet_error() to
API return value.
Type: improvement
Change-Id: I17042954d48c010150fc1dfc5fce9330e8149e87
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: refactor
Change-Id: I7fa113e924640f9d798c1eb6ae64b9c0a9e2104c
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I1025cccd784f80b557847f69c3ea1ada5c9de60d
|
|
*** CID 243670: Memory - illegal accesses (OVERRUN)
/src/vnet/ip/ip6_packet.h: 713 in ip6_ext_header_walk()
CID 243670: Memory - illegal accesses (OVERRUN)
Overrunning array "res->eh" of 4 4-byte elements at
element index 5 (byte offset 23) using index "i" (which evaluates to 5).
Type: fix
Fixes: 03092c1
Change-Id: I27e0435cf10534f3b41e11bf7a5629b5428b0651
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
This fix adds check that will omit loop iteration
in case dequeue handler is zero.
Type: fix
Signed-off-by: Dastin Wilski <dastin.wilski@gmail.com>
Change-Id: I7526e3fe7d8c8da9662b4e9204efd5e2d8be1908
|
|
Part 1 -- notes in https://ipng.ch/s/articles/2021/08/13/vpp-2.html
Add the ability for VPP to copy out (sync) its state from the dataplane
to Linux Interface Pairs, when they exist. Gated by a configuration
flag (linux-cp { lcp-sync }), and by a CLI option to toggle on/off,
synchronize the following events:
- Interface state changes
- Interface MTU changes
- Interface IPv4/IPv6 address add/deletion
In VPP, subints can have any link state and MTU, orthogonal to their
phy. In Linux, setting admin-down on a phy forces its children to be
down as well. Also, in Linux, MTU of children must not exceed that of
the phy. Add a state synchronizer which walks over phy+subints to
ensure Linux and VPP end up in the same consistent state.
Part 2 -- notes in https://ipng.ch/s/articles/2021/08/15/vpp-3.html
Add the ability for VPP to autocreate sub-interfaces of existing Linux
Interface pairs. Gated by a configuration flag
(linux-cp { lcp-auto-subint }), and by a CLI option to toggle on/off,
synchronize the following event:
- Sub-interface creation (dot1q, dot1ad, QinQ and QinAD)
A few other changes:
- Add two functions into netlink.[ch] to delete ip4 and ip6 addresses.
- Remove a spurious logline (printing MTU) in netlink.c.
- Resolve a TODO around vnet_sw_interface_supports_addressing()
Type: improvement
Signed-off-by: Pim van Pelt <pim@ipng.nl>
Change-Id: I34fc070e80af4013be58d7a8cbf64296cc760e4e
Signed-off-by: Pim van Pelt <pim@ipng.nl>
|
|
Type: fix
| src/vppinfra/vector/toeplitz.c:69:9: error: ‘kv’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
| src/vppinfra/memcpy_x86_64.h:45:17: error: ‘*((void *)&key+16)’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
| *(u8x16u *) d = *(u8x16u *) s;
| ~~~~~~~~~~~~~~^~~~~~~~~~~~~~~
| src/vnet/gre/interface.c:356:20: note: ‘*((void *)&key+16)’ was declared here
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I71614da2821ebda5200a0cb9437a7aad0c42fbb2
|
|
Reported by coverity
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ib1db0d120321b061f4c2c20117acdfb6e7dc0626
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ia32536a76aa3f92f80ee2cd027a9a010c19b861a
|
|
Type: improvement
Signed-off-by: Damjan Marion <damarion@cisco.com>
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: Ie595e69af8657b0ee18a84ac71c5d433108d9ef8
|
|
So after bucket reset session can send max burst of bytes.
Also, reset pacer bucket to 0 not min burst
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Iced8948c407e6647e6eb4caff5c62c06d45ce0bf
|
|
This ensures the scheduler always tracks sessions that are descheduled,
i.e., do not have events in the old io events list. When app retries to
send, clear descheduled flag and potentially the pacer.
Consequently, transports no longer need to reset the pacer when
sessions are rescheduled after a long app tx pause.
This also fixes a tcp bug whereby the pacer was reset too often when
snd_una was equal to snd_nxt as there was no way to distinguish betwen
app tx breaks and congestion.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Id3cc6c98cd76299e15030e504380dcf3c04c5189
|