Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: fix
This patch fixes the commit e347acbc31111504c015531e8ad764a86d489309
Change-Id: Icee7a6e250c94ae93e606d7869acc55c7a5806b1
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: improvement
on the dedicated IPSec interface, the SA describes the peer, so it is
not possible to forward to a peer for which there is no SA. Therefore if
an SA is added with NULL auth and integ then this explicitly states that
this is what the peer desires.
on the contrary on the IP-IP/GRE interface, in the absence of protection
and an SA, then the traffic is sent in the clear. So adding NULL
auth/crypto iSA is a means to describe that the peer should not be sent
traffic.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I7ad2d466cc74eb7ff8c4c84e0d7897d06e2fcf86
|
|
Type: fix
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Ic6c76b65e2dcc08916373153944507a297c962c0
|
|
Type: style
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I26a19e42076e031ec5399d5ca05cb49fd6fbe1cd
|
|
Type: improvement
Change-Id: I0c82722dfce990345fe6eeecdb335678543367e0
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Change-Id: I73629ccf7d5a49da3858899dc727cc180fb53003
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Zero collector address indicates that the IPFIX exporter is disabled.
You can zero the collector address via vppctl but you can't do it via
the API because the handler returns an error if the address is zero.
With this change, do not return an error in the handler when the
collector address is zero thus allowing the IPFIX exporter be
disabled.
Type: fix
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I1335c0d06af81f11d743c395399a360c612c0c21
|
|
- Assert a valid set prior to first use.
- Sort tables by mask prior to selecting first table
- Use actual table indices and not loop index when linking tables
Type: fix
Change-Id: I9c61c8b7fe97c38faed8f2fc1792d7232799f580
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I0cfe04277d80d9c81499651f893fb2d126ac8c85
|
|
Type: refactor
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I26e4ad6bfd9e0be7745f6ba948bf51550fd4215e
|
|
"sh memory map" now reports shared memory segments mapped by session
layer for applications.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I7debdcd06c7728abfb5cf817a1ccc37de495472c
|
|
QUEUE_SELECT and QUEUE_NOTIFY_OFF registers are shared between all
workers operating on the same device and operations are not atomic
Type: fix
Change-Id: Ie017b1bfc7e3b6b4e59029f45db78eeffd9f3aeb
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
- it is confusing from end consumer perspective that some thing
is somewhere called heap and somewhere mspace
- this is base for additional work where heap pointer is not the same
thing like mspace
Type: improvement
Change-Id: I644d5a0de17690d65d164d8cec3c5654571629ef
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: feature
This patch adds packet buffering on tx for
slow backend which have some jitter/delays
in freeing the vrings.
There are some limitations to the current design:
1) It only works in poll mode.
2) Atleast 1 rx queue of an interface (with buffering
enabled) should be placed on each worker and main thread.
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: Ib93c350298b228e80426e58ac77f3bbc93b8be27
|
|
Use clib_crc32c in place of clib_xxhash on supporting uarch.
Type: improvement
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Change-Id: Icdfb4ffa92c2c9e7aebc3ec99f20e91392a103ab
|
|
Reworked the code to reduce line fill buffer pressure. Improved compiler loop
unrolling, over the existing complex hand-unrolling. Updated the code to use
vlib_get_buffers & vlib_buffer_enqueue_to_next.
Type: improvement
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Change-Id: I7dca7515ba91672eaf50a6eecd13811210cf0006
|
|
Type: fix
Change-Id: I96c30baaf34fe7b0cd899966a507501e58cde934
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Id43b0b6db2b42ee5801236df0bd7f7225e1e081c
|
|
Thanks to Martin Sustrik for spotting the bug introduced by a316744
and submitting the fix.
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I4984fc32503b0c7b6db3543834dfbbfed2a1f23c
|
|
Type: refactor
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I37fef2c32d0561b944b201a1012b87c7ac315e73
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Iae5dbb8aaaf82d8e95c2ee8bbbe6844c9dd49f80
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ib00ac02eabb06a300d01697b89d97b26dd3c4330
|
|
Type: improvement
Change-Id: I8c28c845c75657852f1e513e2832771fad6b90b7
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Signed-off-by: jiangxiaoming <jiangxiaoming@outlook.com>
Change-Id: I61b7988bf6a49a51041bc6085d5f0f4689ff45a6
|
|
Type: style
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I3703b9a882b7577025f495d500daf08a916891b9
|
|
Type: refactor
Change-Id: I54df533a8f863c4e49742903cf2457f18b4fc506
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
The GBP plugin that uses this module is also in-ptogress, hence so is
this module.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I3cb5dd124afac05da013d92d67b2abf6cdf9b769
|
|
This reverts commit 8c91b2ae2b32d428ef35605707788fe064621cb3,
but keep a comment fix.
Type: fix
Signed-off-by: Yulong Pei <yulong.pei@intel.com>
Change-Id: Ia66941bf18d3efac96f41bdf905d877cfb3ab211
|
|
Type: refactor
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ia36d86eb108f0651fc3af8b4dbdc2d0b49e283da
|
|
Type: refactor
Change-Id: I613bf4d6517591351b212bfe6c8d93abf235f5dc
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: refactor
Change-Id: Ifb36eeb146b87e9e305881429d32d6879e955e1e
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: refactor
Change-Id: Ifd770ff4850e63474bf4682ad463021b03786b4b
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Main heap can be hugepage backed so it is more efficient to use
main heap instead of allocating special heap just for mtrie....
Type: improvement
Change-Id: I210912ab8567c043205ddfc10fdcfde9a0fa7757
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I7cdbcfeb6f77a720e190daf9fe555320e586bba8
|
|
Type: fix
While preparing to send a ip_mroute_details API message, the number
of paths for a multicast route is stored in an int in
send_ip_mroute_details(). Before the value in the int is copied into
the field n_paths in the API message, the byte order is swapped.
This results in n_paths getting set to 0.
Change the int to a u8 and omit the byte swap so API clients can
receive data on multicast route paths.
Change-Id: Ie6dcb0f7b135c5b5deeeb2e44147560dbbb12507
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Split vat/api_format.c also for VNET features.
Use auto-generated VAT test code and support dynamic message ID allocation as for plugins.
The arp and geneve features as Guinea pigs.
Type: improvement
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I461591496766bdf10c5f950fd30f1a0ae05909da
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
sanitizer complains about strlen on hi->name in tap_dump_ifs.
hi->name is a vector which is not null-terminated, so use vec_len.
Type: fix
Signed-off-by: Vladimir Isaev <visaev@netgate.com>
Change-Id: Icdd5f65369bb51b0c4a9cd86c24899e6febd837c
|
|
Type: fix
The function of application_setup_proxy() be called when application run as a
proxy server, "app_wrk->first_segment_manager" be realloced in this function,
but variable of "sm" point original memory location.
Signed-off-by: fanyf <fanyufei521@outlook.com>
Change-Id: I753c9fb60d1c0794d5eede9f3fab48381a802e3c
|
|
Initialize txq lock only if some txq are shared and check if another
worker is already operating on the txq before processing gro timeouts
in input node.
Type: fix
Change-Id: I89dab6c0e6eb6a7aa621fa1548b0a2c76e6c7581
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: improvement
Change-Id: Ica75c4e43d6198658a1954640c7ac56ea68bb39a
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Change-Id: I6fdc4e952097e92ac3aa53e0be3ef99e0d801b28
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: refactor
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ibebb6f7d4e610570693e213acd2f6d9332c563c6
|
|
Type: improvement
Signed-off-by: Yulong Pei <yulong.pei@intel.com>
Change-Id: I43556f8c76c7aae64d9c927e1fda3c1774d7e49d
|
|
Type: style
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: Id86e16677564669b0295bbb9fc1303fe39a21b6f
|
|
The syntax of the deprecated flag has evolved.
Clean up usage to be "option deprecated;".
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: If2b639f275eb8db58b36c457f9245fe35a4d8cb1
|
|
Type: improvement
Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com>
Change-Id: I14de90f07d825c5c99023996a88173ee855e9a6f
|
|
The local|remote options to vat's lisp|one_eid_table_dump api command
does not print the eid details instead it produces the following error
messages:
Filter error, unknown filter: 1
Filter error, unknown filter: 2
Type: fix
Signed-off-by: Onong Tayeng <otayeng@cisco.com>
Change-Id: I000c290b400dbf39bd883d57115923167092c9bd
|
|
Currently l2 fib allocates 512MB hash table unconditionally on startup.
This patch postpones table creation up to the point where first
interface is put into l2 mode or mac entry is added.
In addition it reduces default table size to 128MB and increases number
of buckets 4 times. This default setting should be enough to keep 1M mac
entries.
Also, new startup.conf section is added which allows user to change memory
and bucket size. .i.e:
l2fib {
table-size 512M
num-buckets 524288
}
Type: improvement
Change-Id: I2a29209aa3545181f0087544c97a54d8157b6ec5
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ic904abedcd270c95e782159170d457bc396424a0
|
|
This is an af_unix socket alternative to the binary api. To enable it,
add use-app-socket-api under session stanza in startup.conf. When the
socket api is enabled, attachments through the binary api are disabled.
The socket api only works with memfd fifo segments, i.e., shm segments
are not supported.
Type: feature
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I55ffcee201d004846daeeec85c700c7e7a578d43
|