Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: improvement
Change-Id: Idb48f835730db6c652c4b0e6ef310c7f36599a72
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Avoid grabbing the worker barrier if there's no work to be done.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ice3de5df41cd1752aba3419ad2e2dd82f30e9bfb
|
|
Type: improvement
Change-Id: I873a99c1258a97ed5ed195b9756e8302f865e7f0
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: fix
The same value is used for other tunnel types.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I6593001918993d65f127cc9f716c95e932239842
|
|
Type: fix
If a GRE tunnel is created and the peer is not resolved yet and an
IPv6 route is added which points to the tunnel, packets matching the
route will be dropped. When the tunnel peer is resolved, adjacencies
on the tunnel interface should be restacked and packets matching the
route can be encapsulated and sent..
There is a loop that is intended to do this for both IPv4 and IPv6.
The call to walk adjacencies is invoked in a "return" statement though.
So the loop is exited and the function returns before IPv6 adjacencies
are walked.
Remove the return so the loop finishes.
Change-Id: Ia4f695681713020209ea490ae4142857cea49c41
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I7c47b55ec6f0c83f2d13e0e737d0559a32f7c837
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I47d241a8f2f9e9d0761d14dcddd3327c3b28932c
|
|
Type: refactor
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I750c856ac81d951e8c0e62c710e0f35a0c80d6f9
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ie4e3623e7e00456437fac5fb8f9c9083f1aa2a2e
|
|
Type: improvement
Change-Id: I6bb7b6d6bd63b044952ab981be5b0673144c9834
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Iecc33fda7f28c037289775ffe0525a50f89a2b8c
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ie8a15c50531f3ccd5f91dbc0779e4d9c0d146844
|
|
Avoids dispatching ctrl events generated while handling the
current pending list.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ibeaf901ba4cf58a68fbd88e5ec3c23f6c2f6f145
|
|
Type: refactor
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I10ec410fb7f3acb47128dda23510162dc13b20d0
|
|
Type: fix
virtio uses indirect descriptors for chain buffers.
indirect descriptor chain is mapped on a vlib_buffer_t.
Single descriptor is 16 bytes and vlib_buffer_t has
2048 bytes space. So maximum long chain can have
128 (=2048/16) indirect descriptors.
This patch adds check to make sure descriptors chain
len should not exceed 128.
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I060cfb7709568f42c9b5634527172690ce66a1a3
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ifa47e1500e5cfb3c717f87b1d21131b9531c9005
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I24484a5192d7e683507ed640f75fb37914c0efb0
|
|
Half-open sessions are allocated by main thread and cleaned up on main
with timers.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I37f000920a45908b62b5501ae9d54a88a9e4c609
|
|
Mechanical change for patch following this one...
Type: improvement
Change-Id: Iee12f3a8851f35569e6c039494a94fc36e83d20f
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I59eb41516b5e052109428ae70660ed49126c25bb
Type: fix
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
|
|
Fixes issue which causes crash in case when VPP only runs with main thread.
Type: fix
Change-Id: Ia0ca973bb7e7ff81f15b37764ae248e2502bdcec
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I7f9c4b9b6e523ab549087ad21724f34f08fca793
|
|
Also adds support for half-open support transport migration.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Id04c194138956336f93246bbed0332a7030c67e2
|
|
Type: fix
Change-Id: I5ce7e57ae277de26af602fe786048bf21b8612f8
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
- Generate copyright year and version
instead of using hard-coded data
Type: refactor
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I6058f5025323b3aa483f5df4a2c4371e27b5914e
|
|
This patch fixes a vxlan vni field conversion bug in flow api layer
Type: fix
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I37b2ffb54792f48b390ff42da577db2c4869d253
|
|
Half-open tls sessions are now tracked by the app worker and are cleaned
up only when tcp cleans up its half-open session, i.e., independent of
when the established tls context is allocated.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: If5d594d7095192dd527daf4ea1358ffeccdfcc7a
|
|
App transports not supported for now. Will have to be updated
individually.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I75cb6c4e1c5af008af72858a9ee573016812abd4
|
|
Some app(e.g. Envoy) may call shutdown() instead of close() when
draining connection.
Type: improvement
Signed-off-by: liuyacan <liuyacan@corp.netease.com>
Change-Id: I9543b9ca3caa87b10b134fd1fc4019124e41e4d2
|
|
Change-Id: I248ef12fd34ea2a1c383fbcc530a8ffeb31ba92b
Type: fix
Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
|
|
Type: improvement
Change-Id: I415b2f980de10ca3154d2c8677c24792453eccd0
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Signed-off-by: hemant_mnkcg <hemant@mnkcg.com>
Change-Id: I097815617053dac09de7ad3092b3d3071770114f
|
|
Use half-open sessions to track virtual circuit connection
establishment. These sesssions can only be allocated and freed by the
thread that allocates half-open connections (main). Consequently, they
can only be freed on half-open cleanup notifications from transports.
Goal is to simplify state tracking within the session layer but it's
also a first step towards allowing builtin apps to track and cleanup
outstanding connects.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I8a535906d13eb7f8966deb82333839de80f8049f
|
|
Type: fix
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I86b940384a6898d4cb04f3decf30996c94b43d07
|
|
When vhost and another interface, say tap, are configured for interrupt
mode, performance number may be very low from vhost.
Further analysis discovers that when vhost posts an interrupt to the
RX infra, there is a 10 msec delay in waking up its input routine.
The delay is due to vhost posts the interrupt from the main thread
which tries to wake up the worker thread.
The fix is for vhost to move the posting interrupt call to the
corresponding input worker thread by calling
vnet_hw_if_set_rx_queue_file_index() to set it up.
While at it, streamline the function vhost_user_kickfd_read_ready()
since it will be called from the worker thread.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I9beedcd33e1558c8335da4ee7fadc51c29ee4589
|
|
By convention, connects segment manager will be first. Therefore it will
be the one with the first segment wherein lies the app's message queue.
Saves us the trouble of allocating it on first connect, if app started
by listening, and we no longer need to track if it's assignable to a
listener or if it can be removed.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Iba9a8ffaab618eeb41ec2144dcfee62d006dc7a2
|
|
Type: improvement
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I368b0410db2d633d3c52199c840e24d21952c1b4
|
|
Also rename counters in stat segment to make them more filesystem friendly.
Type: improvement
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I8a3f3ec318931f5475fcb181f8b4a079a1fa4b9c
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Type: fix
Change-Id: I433fe3799975fe3ba00fa30226f6e8dae34e88fc
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: improvement
Some tests i.e. ipsec see performance regression when offload flags
are moved to 2nd cacheline. This patch moves them back to 1st cacheline.
Change-Id: I6ead45ff6d2c467b0d248f409e27c2ba31758741
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: fix
The ipfix process node has a hardcoded 5s sleep between sending packets.
The interval between template packets is configurable, but the timing
of packets being sent does not match configuration because of the time
being hardcoded. E.g. -
With template interval set to 3s, a packet will be sent every 5s.
With template interval set to 8s, a packet will be sent every 10s.
Honor the configuration by reducing the wait time to less than 5s if a
template will need to be sent less than 5s from the current time.
Change-Id: I8c11f7bc502ce5b20b6e82a7e7a135a8805a2bad
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: feature
Change-Id: I36041fe5c5f0ff129aee42516189807e96f62123
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I2ca8a5e30e55a84d4567422e4b7fcf90830921d3
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I2d11b1411a7653b94fddd889a5f28640c5f5566c
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Idb286e77a877a6a60aa532263277f002fc002e48
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ic37f640b7f0d0a041c003e76c8f29c21b5e664b3
|
|
Type: improvement
Change-Id: I4ac6b1a6553e26a5c26b6761fa3c4cc5d4925486
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: fix
virtio/tap interfaces set the empty buffers in the input node
for receiving data. Backend uses those buffers, fills them with
data and notifies the virtio/tap driver. But virtio/tap driver
gets into stall state if interface is created and configured
through exec script on VPP startup.conf and put the interface in
interrupt mode while VPP is only configured with main thread.
This patch fixes the problem by prefilling buffers during the
interface creation.
Change-Id: Ibc4d0e70e127ccc4b7cf8b2b18406ae4b02c73b4
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
We add interface address to the global lookup table, so we should
use it as the key when lookup listener. Otherwise, when multiple
threads listen on 0.0.0.0 (local scope disable), duplicate
listeners and sessions would be allocated but only one works.
Type: fix
Signed-off-by: liuyacan <liuyacan@corp.netease.com>
Change-Id: I86f36475c16e217c6c5293a62c4fb5c9477a191e
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I433cc1b7a29f785a431618641317bbfbbe2cf2f4
|