summaryrefslogtreecommitdiffstats
path: root/src/vnet
AgeCommit message (Collapse)AuthorFilesLines
2018-04-24memory leakKingwel Xie1-0/+3
obvious leak of parent_indices Change-Id: I572b33de1756c8062a87c754117d990622fe12fe Signed-off-by: Kingwel Xie <kingwel.xie@ericsson.com>
2018-04-24Support QOS_SOURCE_IP recording from L2 input node.Igor Mikhailov (imichail)2-5/+77
Some scenarios not involving ip[4,6]-input paths might benefit from IP header QOS fields recorded and applied. An example: L2 (overlay) traffic being encapsulated by VPP in VXLAN and transmitted on another (underlay) interface might want the QOS information carried over in the outer IP header. Change-Id: I4d9462c47ae6ba97680edb1e53340b17cfd7845b Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
2018-04-23MPLS VPLS CLI fixNeale Ranns1-0/+1
set the IS_RX flag based on CLI 'l2-input-on' Change-Id: I53d9129a7c09f605c1eb55753426f392b1b480bc Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-04-20tcp: make newreno byte instead of acks dependentFlorin Coras4-3/+28
Should be more resilient to ack losses Change-Id: Icec3b93c1d290dec437fcc4e6fe5171906c9ba8a Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-04-20tcp: improve statsFlorin Coras3-128/+177
Change-Id: I9ab11ba9f958c679112eb22c8db39cb269a29dc7 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-04-19Allow an IPsec tunnel interface to be renumberedMatthew Smith5-29/+42
When creating an IPsec tunnel interface, allow a numeric identifier to be set for use in the interface's name in place of the dev instance. Default to using the dev instance if no value is explicitly set. When an IPsec tunnel is deleted, the interface is deleted now instead of being kept in a pool of available hw interfaces. Otherwise there was the possibility of conflicting tx node names between deleted tunnels and newly created ones. Change-Id: Ic525466622a0dec38a845fa5871c084f6d9da380 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2018-04-19Minor optimzation/cleanup to ethernet-input nodeJohn Lo1-5/+5
Change-Id: Ibf3ef82950f50b746394a731cd2e7cba1cd16ec4 Signed-off-by: John Lo <loj@cisco.com>
2018-04-18typo fix: UNKOWN -> UNKNOWNAndrey "Zed" Zaikin5-12/+12
Change-Id: I008a4d7ad7160d1f07e7ceef712a5318a9368308 Signed-off-by: Andrey "Zed" Zaikin <zed.0xff@gmail.com>
2018-04-18Mcast rewrite optimisationsNeale Ranns8-45/+59
hard code the address mask offsets. This are protocol specific and only used on ethernet when used at all. Change-Id: Ib1f6f33682f53254ffbb5a241a1583e65420e0c7 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-04-18session: coverity warningsFlorin Coras2-3/+3
Change-Id: I53bb1e289ba16ee6d9aed7285b18437c996077a4 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-04-18SCTP: coverity warningsMarco Varlese1-5/+2
This patch addresses the warning 182994 Change-Id: I071f3cbdf9965c7b57d444f79430ee75c66c856e Signed-off-by: Marco Varlese <marco.varlese@suse.com>
2018-04-18udp/session: refactor to support dgram modeFlorin Coras18-274/+778
- adds session layer support for datagram based protocols - updates udp to work in pure connectionless and datagram mode. The existing connected mode is now 'accessible' for apps as a dummy UDPC, as in, connected udp, protocol. - updates udp_echo, echo client, echo server code to work in datagram mode. Change-Id: I2960c0d2d246cb166005f545794ec31fe0d546dd Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-04-18Fix the ip header offset counting in vnet/ipsecSzymon Sliwa1-5/+4
IP header is set as data + sizeof(ethernet_header_t), what does not need to be true. The solution is to use l3_hdr_offset. Change-Id: I5d9f41599ba8d8eb14ce2d9d523f82ea6e0fd10d Signed-off-by: Szymon Sliwa <szs@semihalf.com>
2018-04-17Add logging supportDamjan Marion5-52/+136
Change-Id: Ieac9cf50156dbbb4962411e900d59256441915ef Signed-off-by: Damjan Marion <damarion@cisco.com> Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-04-17IP mcast: allow unicast address as a next-hopNeale Ranns8-41/+306
Change-Id: I5e679f2601e37688f2768620479dc2efb7d19ca3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-04-17VPP-1243: fix reassembly CLIKlement Sekera1-5/+6
Change-Id: Ie20aaf0eb1a5a338a54f0de4d6da661431be5163 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-04-17vhost: show vhost-user <interface> may crash [VPP-1242]Steven1-0/+7
show vhost-user <interface> may cause a crash if interface is semi-bogus. Semi-bogus means it is a known vpp interface which has a hw_if_index, but it is bogus because it is not a vhost-user interface. The fix is to add a check to reject non vhost-user interface for the command. Change-Id: I63f1e8bfbf46f5ec4c30f9fb3546982b63cd7cc5 Signed-off-by: Steven <sluong@cisco.com>
2018-04-17SCTP: coverity scan warningsMarco Varlese3-30/+39
This patch addresses 182346, 182347, 182353. Change-Id: I59c3d74bd3a2122b836c93e22ddb632fa032f7fe Signed-off-by: Marco Varlese <marco.varlese@suse.com>
2018-04-17vxlan:remove counters writeback cacheEyal Bari2-519/+242
+refactor decap loop to remove repetitions and goto's slightly improves performance in scale (3k-4k tunnels) tests (7-9 clocks) slightly deteriorates performance in single tunnel tests (3-4 clocks) Change-Id: I1a64ed0279c00481b61a162296c5a30f58bf29c4 Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-04-16Implement ip_probe_neighbor APIJohn Lo2-9/+63
Add API support similar to VPP CLI "ip probe-neighbor" except API call is asynch and will not wait, as the CLI does, for address resolution of probed neighbor. The API client can use the APIs want_ip4_arp_events or want_ip6_nd_events to get notified of the desired address resolution event. Change-Id: Ieab58abe75b5cc7f5185b3b91418b6362f8992d3 Signed-off-by: John Lo <loj@cisco.com>
2018-04-16session: use generic session pool for listenersFlorin Coras8-103/+42
Change-Id: I825f3822910a6ee368b9004e39ca16ac6833e30c Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-04-13Revert "MTU: Setting of MTU on software interface (instead of hardware ↵Damjan Marion19-232/+221
interface)" This reverts commit 70083ee74c3141bbefb185525315f1b34497dcaa. Reverting as this patch is causing following crash: 0: /home/damarion/cisco/vpp3/build-data/../src/vnet/devices/devices.h:131 (vnet_get_device_input_thread_index) assertion `queue_id < vec_len (hw->input_node_thread_index_by_queue)' fails Aborted Change-Id: Ie2a365032110b1f67be7a9d832885b9899813d39 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-04-13MTU: Setting of MTU on software interface (instead of hardware interface)Ole Troan19-221/+232
Change-Id: I98bd454a761a1032738a21edeb0fe847e801f901 Signed-off-by: Ole Troan <ot@cisco.com>
2018-04-13GBP V2Neale Ranns10-7/+73
update the GBP plugin to implement the full NAT feature set of opflex agent Change-Id: Ic06a039c889445ed0b9087fa1f292634192b0f8d Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-04-13bond: ping fails between l2 BD [VPP-1238]Steven4-15/+91
In dpdk based bonding, when the bond interface is configured for l2, it automatically sets the bond interface to promiscuous mode and sets rx redirect to ethernet-input. This allows traffic to be bridged to non compute node facing interface when it is received from the compute node interface. For native vpp bonding, we need to do similar things. When the bond interface is configured for l2, we set the slave interfaces to promiscuous mode and set rx redirect to ethernet-input because dpdk does not know anything about the bond interface. Likewise, when a new interface is enslaved, we also need to do the same thing if the bond interface has already been configured for l2. Change-Id: I7e168008e8a4221be74929b2a20e6db0ce8f3110 Signed-off-by: Steven <sluong@cisco.com>
2018-04-12Fixes for 'make UNATTENDED=yes CC=clang CXX=clang verify'Neale Ranns12-95/+42
Change-Id: I994649761fe2e66e12ae0e49a84fb1d0a966ddfb Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-04-12bond: 1 packet/frame == bad performance [VPP-1236]Steven1-6/+8
While https://gerrit.fd.io/r/#/c/11316/ took care of 1 packet/frame for most of the bonding modes, it missed the broadcast mode. This patch is to fix the 1 packet/frame for the broadcast mode. Change-Id: Iac48a2977c7f702f341479cc712a6448090dbc60 Signed-off-by: Steven <sluong@cisco.com>
2018-04-10Make IPsec tunnel intf work with IPv4 output featuresMatthew Smith2-0/+13
With no IPv4 output features on an IPsec tunnel inferface, when packets are forwarded to that interface, they reach the ipsec-if-output node via the output_node_index on the hw interface and they are handled correctly. When an IPv4 output feature (e.g. output ACL, outbound NAT) is enabled on an IPsec tunnel interface, outbound IPsec stops working for that interface. The last node in the ip4-output feature arc is interface-output. From there a packet is sent to ipsec<N>-output, and then ipsec<N>-tx. The tx function for an IPsec tunnel interface that is called by ipsec<N>-tx is a dummy that doesn't do anything except write a warning message. Enable a feature on the interface-output feature arc for an IPsec tunnel interface so the ipsec-if-output node is reached from the interface-output node. Change-Id: Ia9c73d3932f5930ec7ce0791a0375b1d37148b01 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2018-04-09features: don't break linked list, create separate one for arcDamjan Marion3-5/+5
We need to keep original linked list so destructire can remove entries. Change-Id: I5ff5ca0e1a417d88707255207725bba46433c943 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-04-09L2: no-flood interface type in the Bridge-DomainNeale Ranns5-11/+42
Change-Id: I50ff0cacf88182f8e0be19840c50f4954de586e2 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-04-09plugins: unload plugin if early init failsDamjan Marion2-0/+57
Change-Id: I32f68e2ee8f5d32962acdefb0193583f71d342b3 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-04-09DVR: save the rewrite length in packet meta-data for featuresNeale Ranns1-3/+9
Change-Id: I0efd03bdb84bc9ff2334d398bfdb82486228114a Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-04-07BIER coveroty fix for unintialised return value on errorNeale Ranns1-1/+1
Change-Id: I2b1d1035f810cb58356626cf081d46eb289265b4 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-04-06Change l2-fwd node to allow possible feature before UU-FLOODJohn Lo1-6/+14
If l2-fwd node does not find an L2FIB entry for DMAC of packet, use input feature bitmap to find next node instead of always sending packet to l2-flood node to perform unknow unicast flood. It provides possibilty of using other feature to forward unknow unicast packet instead of flooding the BD. Change-Id: I56b277050537678c92bd548d96d87cadc8d2e287 Signed-off-by: John Lo <loj@cisco.com>
2018-04-05IPIP: version.h is not neededNeale Ranns1-1/+0
Change-Id: I78a4176f98c2b4630a57ac5ddb7faf58ba0c4ee1 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-04-04Detailed stats collection featureNeale Ranns5-23/+290
Use device-input and interface-output feautre arcs to collect unicast, multicast and broadcast states for RX and TX resp. Since these feature arcs are present only for 'physical' interfaces (i.e. not su-interfaces) counter collection is supported only on parent interface types. Change-Id: I915c235e336b0fc3a3c3de918f95dd674e4e0e4e Signed-off-by: Neale Ranns <nranns@cisco.com> Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2018-04-04NAT added FIB entries have a preference lower than API/CLINeale Ranns2-0/+6
Change-Id: Ia99490180683e8649784f7d9d18c509c3ca78438 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-04-03reassembly: bug fixesKlement Sekera3-17/+22
This change fixes a bug which would corrupt features infra by making feature infra resistant to double-removal. It also fixes 'out of memory' issue by properly initializing the bihash tables. Change-Id: I78ac03139234a9a0e0b48e7bdfac1c38a0069e82 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-04-03session: use fib index in ip local testFlorin Coras1-1/+1
Change-Id: I148cb40c8bea55dabe54fa6a662d46862e571640 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-03-30tapv2: Sporadic SIGABRT in ethernet_input [VPP-1183]Steven2-5/+6
virtio_free_rx_buffers uses the wrong slot in the vring to get the buffer index. It uses desc_next. It should be last_used_idx which is the slot number for the first valid descriptor. Change-Id: I6b62b794f06869fbffffce45430b8b2e37b1266c Signed-off-by: Steven <sluong@cisco.com>
2018-03-30bond: show trace causes a crash if the interface is deletedSteven3-13/+32
For the debug image, if the interface is removed and the trace was collected prior to the interface delete, show trace may cause a crash. This is because vnet_get_sw_interface_name and vnet_get_sup_hw_interface are not safe if the interface is deleted. The fix is to use format_vnet_sw_if_index_name if all we need is to get the interface name in the trace to display. It would show "DELETED" which is better than a crash. Change-Id: I912402d3e71592ece9f49d36c8a6b7af97f3b69e Signed-off-by: Steven <sluong@cisco.com>
2018-03-29Coverity fixes (VPP-1204)Chris Luke5-12/+15
Minor bug fixes CID 183000: double close CID 180996: dead code CID 180995: NULL deref CID 181957: NULL deref CID 182676: NULL deref CID 182675: NULL deref Change-Id: Id35e391c95fafb8cd771984ee8a1a6e597056d37 Signed-off-by: Chris Luke <chrisy@flirble.org>
2018-03-29ip6: fix ip6-local urpf checkingFlorin Coras1-4/+7
Use sw_if_index[VLIB_TX] if set as fib index when doing the urpf check. Change-Id: I5ec3e7f7a54c6782704d91e9a5614fd0f7f9e3de Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-03-29l2_input:optimize counter accessEyal Bari1-31/+16
only one counter update per frame (was updated per iteration) only access ethertype for casts (was always accessing ethertype) Change-Id: I3a3c3219ec63e975cf5bd8cf2d93103932a4aaa3 Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-03-29tcp: fix fib index buffer taggingFlorin Coras3-14/+19
Change-Id: I373cc252df3621d44879b8eca70aed17d7752a2a Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-03-29No need for this routine to be globalDave Barach1-1/+1
Causes subtle misbehavior elsewhere Change-Id: I3a0ade26e8e03b8c5dc8e722f6a01fb99ec7a1e0 Signed-off-by: Dave Barach <dave@barachs.net>
2018-03-28bond: cli renameSteven1-11/+10
rename "enslave interface <slave> to <BondEthernetx>" to "bond add <BondEthernetx> <slave> "detach interface <slave>" to "bond del <slave>" Change-Id: I1bf8f017517b1f8a823127c7efedd3766e45cd5b Signed-off-by: Steven <sluong@cisco.com>
2018-03-28SCTP: use custom fibMarco Varlese2-7/+12
Following TCP fixes from Florin (11430), this patch follows the same approach to indicate a fib (not just using the default one). Change-Id: Ib883aa0e9a1c6157acfea69c44426ba07d6c932a Signed-off-by: Marco Varlese <marco.varlese@suse.com>
2018-03-27vxlan:refactor add del command functionEyal Bari1-102/+43
Change-Id: I33ba5a011100baf1c786f9a63a0cf3d2e1020493 Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-03-27bond: coverity woesSteven2-27/+32
coverity complains about statements in function A function A { x % vec_len (y) } because vec_len (y) is a macro and may return 0 if the pointer y is null. But coverity fails to realize the same statement vec_len (y) was already invoked and checked in the caller of function A and punt if vec_len (y) is 0. We can fix the coverity warning and shave off a few cpu cycles by caching the result of vec_len (y) and pass it around to avoid calling vec_len (y) again in multiple places. Change-Id: I095166373abd3af3859646f860ee97c52f12fb50 Signed-off-by: Steven <sluong@cisco.com>