Age | Commit message (Collapse) | Author | Files | Lines |
|
Change-Id: I11ac3e4f59206902e5dfc326f815c877c5dd6643
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I1c2b3e40c689bedcdcea7887792b6b6b6aeb48d5
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I0ef3115bd29a11538090c582a4eacdbb7cd86d7a
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
+ As old PAPI clients are likely to put zero as the value
for sw_if_index, the behavior should not perform
index filtering at least when name filtering is enabled (valid).
+ interface.api version set to 2.3.0,
as the new behavior is backward compatible
(at least for PAPI with name filter enabled),
but not forward compatible.
+ Minor whitespace cleanup.
Change-Id: I315a0eae4004f9d9b6c5f9ecf0f179e669729118
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Change-Id: I076c753e419bbb177d2d28609190715e9895b398
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I02c857da4cf6da5e0e55c1e48b63716af7ade0a9
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
This reverts commit 5d0d5494db58422eb528c0f8b39a86ea966505e9.
The csit crash was actually due to the test image missing the patch
https://gerrit.fd.io/r/#/c/17731/
It was a mistake to revert the original patch
https://gerrit.fd.io/r/#/c/15577/
Change-Id: I7fc563981aa13d308d55b25194fee21475ebc57d
Signed-off-by: Steven Luong <sluong@cisco.com>
|
|
When container is deleted which has tap interface attached,
Linux also delete the tap interface leaving the VPP side of
tap. This patch does a clean up job to remove that VPP side
of tap interface.
To produce the behavior:
In VPP:
create tap
On linux:
sudo ip netns add ns1
sudo ip link set dev tap0 netns ns1
sudo ip netns del ns1
Change-Id: Iaed1700073a9dc64e626c1d0c449f466c143f3ae
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: Ia8cea13f7b937294e6a080a55fb2ceff30063acf
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I0657cb44f58942ef281046dd3841bda669b10589
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I26279c19b879e59c68fda31426fe42dae62a858d
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I4d1d22cb24564896264e77c1810804ea3f54cb37
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Problems Addressed:
- Contention of cursize by producer and consumer.
- Reduce the no of modulo operations.
Changes:
- Synchronization between producer and consumer changed from cursize
to head and tail indexes
Implications: reduces the usable size of fifo by 1.
- Using weaker memory ordering C++11 atomics to access head and tail
based on producer and consumer role.
- Head and tail indexes are unsigned 32 bit integers. Additions and
subtraction on them are implicit 32 bit Modulo operation.
- Adding weaker memory ordering variants of max_enq, max_deq, is_empty
and is_full Using them appropriately in all places.
Perfomance improvement (iperf3 via Hoststack):
iperf3 Server: Marvell ThunderX2(AArch64) - iperf3 Client: Skylake(x86)
~6%(256 rxd/txd) - ~11%(2048 rxd/txd)
Change-Id: I1d484e000e437430fdd5a819657d1c6b62443018
Signed-off-by: Sirshak Das <sirshak.das@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
|
|
To connect a stream, apps should call connect while passing the id of the QUIC
connection in the new transport_opts field in session_endpoint_cfg_t.
Apps are notified of new streams with their accept callback, which is called
each time a peer opens a stream.
Change-Id: I0f82ec344db58008d54641553eddec2973768435
Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
|
|
This enables applications to create sessions in their RX callbacks, which can
invalidate the session pointer. This is required for the QUIC protocol
implementation.
Change-Id: I6072c1c368fd9d17a960ec086a788089dd6f54b4
Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
|
|
Change-Id: Id2ddb77b4ec3dd543d6e638bc882923f2bac011d
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I4f72989885ecfc6a0b27553194c6611fd71f7e5b
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
pcap rx trace on max 100 intfc tap0
then
pcap rx trace status
Displays "local0" instead of "tap0" due to a typo in
pcap_trace_command_internal(...).
Change-Id: Id2de6a24174aac24d9051b7404f01edc806a6573
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Crash will happen when someone will try to setup a tap interface
in host namespace without providing the host side of tap interface
custom name. This patch fixes the problem by using the default name
in this case.
Change-Id: Ic1eaea5abd01bc6c766d0e0fcacae29ab7a7ec45
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
decrypting too many bytes.
Change-Id: I4663e70271d9734eda7f9a127967b9224c0e5efc
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Parsing ipv4 upper layer is not meaningful
if it's a fragment packet except the first.
Change-Id: I442fb7ec01244fde8c4f7656a8ba633d0aa0f97e
Signed-off-by: Faicker Mo <faicker.mo@ucloud.cn>
|
|
Change-Id: I7d84bab7768421ed37813702c0413e52167f41ab
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Change-Id: Ib346570daa3e40f4f53100a05e9355ce60d533a4
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ie42b26e6d5cdb7b23f370ea2933c65079e8d1089
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
hard code IV and key lengths based on cipher.
Init IV from random data, use AES instruction to rotate.
Change-Id: I13a6507d12267b823c528660a903787baeba47a0
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ie71235e5a0ff84222d8a35f5d4e99e9b20447d61
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: I49c710c5ace24a4c1f083120fd4c2972566a1695
Signed-off-by: Damjan Marion <damarion@cisco.com>
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Change-Id: I74a61e941176321da0767affff0fb023f4c54c35
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
A plugin to use Intel IPSec MB library as a VPP crypto engine
This changes uses concepts from:
https://gerrit.fd.io/r/#/c/17301/
hence that author's work is acknowledge below
Change-Id: I2bf3beeb10f3c9706fa5efbdc9bc023e310f5a92
Signed-off-by: Neale Ranns <nranns@cisco.com>
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Node tracing condition was wrongly reversed by commit "5ecd5a5d15 Move
pcap rx/tx trace code out of the dpdk plugin".
This prevented packet tracing in ethernet-input node and also impacted
performance in the no tracing case.
Change-Id: I345a11191d027c6c4ec474a2901995338050680a
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
refactor the IPSEC tests a bit so we can parameterise
the setup.
Change-Id: I777e5eb8f29ca1dce3dd273ebd05dae5846790af
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Iae358365de8ccbc0441b14f21ba6b365cbfec09a
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Some API action handlers called vl_msg_ai_send_shmem()
directly. That breaks Unix domain socket API transport.
A couple (bond / vhost) also tried to send a sw_interface_event
directly, but did not send the message to all that had
registred interest. That scheme never worked correctly.
Refactored and improved the interface event code.
Change-Id: Idb90edfd8703c6ae593b36b4eeb4d3ed7da5c808
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: I8c03c4aa90fb0056e11e0f234999c25d7839d759
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I046e481a67fbeffdaa8504c8d77d232b986a61ee
Signed-off-by: John Lo <loj@cisco.com>
|
|
Change-Id: I681169b82c661b7f0bf19f09d07d76ac1d3ed173
Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I215e1e0208a073db80ec6f87695d734cf40fabe3
Signed-off-by: Jim Thompson <jim@netgate.com>
|
|
Change-Id: I7c6e4bf2abf08193e54a736510c07eeacd6aebe7
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I925aa5bf9472e81f98072d63df499b19e6ddf43d
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I33cd6e44d126c73c1f4c16b2041ea607b4d7f39f
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I9282a838738d0ba54255bef347abf4735be29820
Signed-off-by: Jim Thompson <jim@netgate.com>
|
|
Change-Id: Iff6f81a49b9cff5522fbb4914d47472423eac5db
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I494a6a7f4818a224376ec9150cff3872a3aec659
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I9db1b74097c9df587b9265b14a969d347bcb731a
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I550313a36ae02eb3faa2f1a5e3614f55275a00cf
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Iea88ce5f6628e131e507ba45a3dbb2de7e6c1498
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ia2be56e198c960788430705b356170f8cc12c450
Signed-off-by: Jack Xu <jack.c.xu@ericsson.com>
|
|
Change-Id: If76992e283a27fa193a6865257ab3aa764066e48
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Also:
- force reset if wait close pops in fin-wait-1 with unsent data
- adds more event logging.
Change-Id: I4ddada046214fa71e17514cdec57b3026f84a283
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I3e3820da5a9de97070bceecd3ea53b5351654319
Signed-off-by: Florin Coras <fcoras@cisco.com>
|