Age | Commit message (Collapse) | Author | Files | Lines |
|
This inline function is introduced to simplify code readability and consolidate AH packet
processing in separate API.
Type: improvement
Change-Id: Id98074d00aba277fed714ea9995655c9e84ec83b
Signed-off-by: vinay tripathi <vinayx.tripathi@intel.com>
|
|
Type: improvement
Change-Id: I252951d3ec01497c049ca0ffb7cb42aaf2efb965
Signed-off-by: Dau Do <daudo@yahoo.com>
|
|
Type: feature
Change-Id: Ibd876c5251fc2f9d87816d235fff2de22be4b21c
Signed-off-by: Monendra Singh Kushwaha <kmonendra@marvell.com>
|
|
When using gdb_show_traces() in debug mode, don't assert if workers are
not parked, as it is typically called from gdb.
Type: fix
Change-Id: Iabf175d96dc152da4d1abfbce9ccc9020d0b5d61
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
This patch fixes counter_start value, as it should hold the cumulative
counter value whenever counter clear routine is called.
Type: fix
Fixes: 38c619115b
Change-Id: I50bf8ddcde419caf1170dfacdea03ff3d93a3327
Signed-off-by: Monendra Singh Kushwaha <kmonendra@marvell.com>
|
|
Type: fix
This patch fixes the missing UDP port check in IPsec NAT-T
case. As of RFC3948 UDP encapped ESP traffic should have
destination port ID of 4500, which was missing.
The related tests are updated with this port ID, too.
Change-Id: I73ecc6a93de8d0f4b642313b0f4d9c2f214a7790
Signed-off-by: Fan Zhang <fanzhang.oss@gmail.com>
|
|
Type: improvement
Change-Id: Ib822f36ff7b3ecda162fc99bf3892f912d0649f0
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: fix
fib_api_path_decode() is utilized by the IP route API call
to translate the path from the API to the fib_route_path_t
structure. The ip_route_add_del_handler_t function initializes
the fib_route_path_t structure to zeros, consequently setting
the sw_if_index value to 0, which is a valid value in VPP.
Typically, the default VRF (Virtual Routing and Forwarding)
has a local interface at index 0, leading to normal functionality.
However, a custom VRF table without any interface will result
in a crash.
The issue arises because the DROP route in fib_api_path_decode()
does not override the sw_if_index value with the one provided
in vl_api_fib_path_t. Subsequently, when this sw_if_index is
attempted to be resolved in the VRF table where the interface
does not exist, it leads to a crash.
This patch addresses the problem by setting the sw_if_index of
fib_route_path_t to the sw_if_index value of the API path.
To reproduce the issue, please remove the fix and run the following command:
make test-debug TEST=test_ip4.TestIPv4RouteLookup.test_exact_match
Change-Id: I5d72e91e5c701e749a92873941bee7b7b5eabd41
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: improvement
Change-Id: Ia70f16c92dfc153256db6dcdf23f5487d5a7b678
Signed-off-by: Maxime Peim <mpeim@cisco.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I11de9e1156420e0a37d637d8611bb3cf9788d699
|
|
Type: fix
Change-Id: I57ce42c193fd9408b9d4790482ea76d784148c30
Signed-off-by: Maxime Peim <mpeim@cisco.com>
|
|
In production network, often the host and the vm are managed by different
groups. The host statistics may not be readily available to the folks who
manage the VM. Having the RX queue full statistics in VPP can inform
that there might possibly be drops in the host.
Type: improvement
Change-Id: I43206647ac0d8092968c4187236d9696ae0acccd
Signed-off-by: Steven Luong <sluong@cisco.com>
|
|
This makes session_lookup_connection_wt6 consistent with session_lookup_connection_wt4 -
they both just return an error for wrong thread.
Type: fix
Change-Id: Ide38976e9a7274b53311e65711098e6b22a3f8d5
Signed-off-by: Brian Morris <bmorris2@cisco.com>
|
|
To match the API behavior, and as it is more useful to have an entry
age than its time last probe.
Type: fix
Change-Id: I07680cd713d0d2b6208a58208b032af7f6a92825
Signed-off-by: Maxime Peim <mpeim@cisco.com>
|
|
Move sr_mpls folder under vnet to the plugin folder, update cmake configuration
and header paths, and add plugin.c to register plugin.
JIRA: VPP-2054
Type: improvement
Change-Id: I1ad6f287f67eb0c35588c339bcd51218fadf5f8e
Signed-off-by: Scott Hutton <schutton@cisco.com>
|
|
"port->attr.hw_addr" is set during the port initialization. It won't be
updated if the mac address of the port is changed via the vpp command
line.
Use "port->primary_hw_addr" to dump the updated mac address correclty.
Type: fix
Fixes: 38c619115b
Change-Id: I6c99fcfdfae67efb3606e17f36781c56716ff7ea
Signed-off-by: Alok Mishra <almishra@marvell.com>
|
|
When the NIC does not support mac filter, we rely on ethernet-input
node to do the destination mac check, ie, when the interface is in L3,
the mac address for the packet must be the mac address of the
interface where the packet arrives. This works fine in ethernet-input
node when all packets in the frame might have different interfaces, ie,
ETH_INPUT_FRAME_F_SINGLE_SW_IF_ID is not set in the frame. However,
when all packets are having the same interface,
ETH_INPUT_FRAME_F_SINGLE_SW_IF_ID is set, ethernet-input node goes
through the optimized routine eth_input_single_int -> eth_input_process_frame.
That is where dmac check has a bug when all packets in the frame are
either, ip4, ip6, or mpls without vlan tags. Because without vlan tags,
the code handles all packets in fast path and ignores dmac check.
With vlan tags, the code goes to slow path where dmac check is handled
properly.
The fix is to check if we have a bad dmac in the fast path and force the
code to go to slow path which will handle dmac check properly.
Also do a wholesale correction on all the testcases which do not use
the proper dmac when sending L3 packets.
Type: fix
Change-Id: I73153a805cecdc24c4eefcc781676de04737ae2c
Signed-off-by: Steven Luong <sluong@cisco.com>
|
|
set_interface_name may crash if wrong sw_if_index is passed e.g. ~0
Type: fix
Signed-off-by: Stanislav Zaikin <stanislav.zaikin@46labs.com>
Change-Id: Ic7e400c914fb33c2f9eac4f2985bb5b163a18d57
|
|
Type: improvement
Change-Id: I955fbef0e0238cb69307e96cd1c677061737e5f3
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: fix
Change-Id: I80e90cab8e2e9fef837779e36e0256baf791b801
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
This commit adds missing support in CLI for creating ipsec itf
in p2mp mode.
Type: fix
Signed-off-by: Gabriel Oginski <gabrielx.oginski@intel.com>
Change-Id: I1bd1cc6667625b8e527af8d25bd8e723751dbc41
|
|
Currently ipip tunnel allows to use an empty addresses for dst when we
trying to add tunnel, but it doesn't return it correctly on ipip dump
call. There is case when we create an ipip tunnel with an empty ipv6
address, address is zero, but AF is ipv6. And when we dump ipip tunnels
we get an emtpy ipv4 address instead of an empty ipv6 address.
There is no point to detect AF for each address in
send_ipip_tunnel_details, because ipip tunnel can't handle different
AF for src and dst addresses, and prohibits creating ipip tunnel
with different AF of dst and src addresses.
With this fix, send_ipip_tunnel_details function return a correct AF
despite address value.
Type: fix
Change-Id: Ib343293ad79a300cdb70135fffbfd156dfef6e27
Signed-off-by: Anton Nikolaev <anikolaev@netgate.com>
|
|
Type: fix
Fixes: c4c205b091934d96a173f4c0d75ef7e888298ac7
Change-Id: I110729601a9f19451297883b781ec56e2b31465b
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Force transport and session cleanup on session detach if transport is
already closing. This should also avoid races between transport
initiated session cleanups and pending session control events.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I83a947a0c01f5af8ac70aa31fee660276f1d1c60
|
|
Type: fix
Change-Id: I5f309ca4db4ae4a3e475d87b8f0188c4ead5e562
Signed-off-by: lijinhui <lijh_7@chinatelecom.cn>
|
|
Type: fix
Change-Id: I0a43a37971d03a700926d59e848f0b6e6dbeb19a
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: improvement
Change-Id: Ib824d0ca9efc7d8967e043db69017655b2dcf6b5
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
The rewrite string can be up to max_size, and max_size can be up to
VNET_REWRITE_TOTAL_BYTES. Don't waste the last byte.
Type: fix
Change-Id: I2fb7e9873b6b4c1e6a55b172c7f753f3c5910802
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
In case of multiple path within tunnel, mpls lookup node
computes lb hash with mpls_compute_flow_hash config value 0,
so only mpls label and l4 ports gets accounted, not 5-tuple.
This leads to flow traffic polarization and disbalance over
mpls paths.
Use mpls hash config from lb instead, usually it'll be
MPLS_FLOw_HASH_DEFAULT with 5-tuple plus flowlabel.
As optimization, fix flow hash reuse from the previous lookup
node if present, like ip_lookup does. Previously mpls lookup
always calcs the hash.
Test lb distribution for both cases.
Also, use the same flow hash hex format in ip4/ip6 and mpls
traces for easier reading, most code changes is due fixstyle
formatting.
Type: fix
Signed-off-by: Vladislav Grishenko <themiron@yandex-team.ru>
Change-Id: Ib89e1ab3edec14269866fe825a3e887d6c817b7c
|
|
On unnumbered interfaces, ARP fails because there is no attached route.
Allow replies to peer-to-peer addresses on unnumbered interfaces:
eg. 192.0.2.1/32 <-> 192.0.2.2/32
Type: fix
Change-Id: Ibeb8d8ebc8d58d5bfb0724739a17694e0217356e
Signed-off-by: Pim van Pelt <pim@ipng.nl>
|
|
Only set state to ready if session is not already closing.
Type: fix
Change-Id: Ic95667f43ed09d693f1cf7c9f1c16f7f995ea2d8
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: fix
Change-Id: I739b7129c7e5a3fccefcdeeaf7f4a298223dd8eb
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: fix
Change-Id: I56c1a2717f197c889425449b37f51b0f2cc89ea5
Signed-off-by: Maxime Peim <mpeim@cisco.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I1464e93cd3020eaa26068df558924e39dd255ccb
|
|
- also fix memory leak in adj_glean_walk_proto()
Type: fix
Change-Id: I3cd72b14506e6bfc9d8d77a65d7b9b2703992367
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
l2 tunnels like vxlan, gtpu, geneva use vnet_l2_compute_flow_hash() to
compute flow hash for udp src port entropy. In case of inner mpls tunnels
to the same lsr ethernet src and dst macs are the same, so l2 flow hash
is also the same leading to no src port entropy and the only rss queue
overflow on receiver side.
Fix it for all the possible vnet_l2_compute_flow_hash callers by making
mpls playload hash in additon to ip4/ip6. Visible performance impact is
not expected as it's only one check for mpls ethertype for common cases.
Type: fix
Signed-off-by: Vladislav Grishenko <themiron@yandex-team.ru>
Change-Id: I69153d42fb3d7c094a670c674fac8d14039c626a
|
|
Type: improvement
Change-Id: I8c248d9e224bd069b641a174da57d448371470af
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
Type: fix
Change-Id: Ic015b37e18a43c49c3fb3dbff284a17fa2c5fd99
Signed-off-by: Fan Zhang <fanzhang.oss@gmail.com>
Signed-off-by: Kai Ji <kai.ji@intel.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ieb4e9d9e39b937ad4c7316b3955b3ca296f0a191
|
|
Type: improvement
Change-Id: Iefe5c2e610a26241a88ca783ac548fd8f2317bb0
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I04f836d09a1cbd5a5b55dc64359d2d761dfc4988
|
|
First step towards moving to an 8 byte struct instead of u64.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Idd0b95520ab7158e175b9af1702fc09c0613a4bb
|
|
Type: refactor
Change-Id: Ifd7f5b351401cdcaaaf57fefc5dbbfdaf235054e
Signed-off-by: hsandid <halsandi@cisco.com>
|
|
Make sure session is marked as invalid.
Type: improvement
Change-Id: I1c861645de95ef15a24acd4fe6dd5364a55b4fb8
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: improvement
Change-Id: I958e059384db3c13a29f64be96877f57617bbae2
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ibe218a922ab656b8362e3c085193cb848783c255
|
|
Fix copy-paste typo with an incorrect index.
Type: fix
Signed-off-by: Dmitry Valter <d-valter@yandex-team.com>
Change-Id: I463e6f016df9cd24e96defcd30c1b442b8809416
|
|
Type: improvement
Change-Id: Icac31a8a3da71334e2b877f3b8e5d5a7cc5e76b8
Signed-off-by: Fan Zhang <fanzhang.oss@gmail.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I60600452c91184da571d4630bf2f0d9c24a3e85e
|
|
The offload should be handled by gso node or by the NIC
if the latter has the relevant capabilities. But ip midchain
is missing the support for buffer offload metadata in case
of GSO packet.
This patch adds the relevant support to add the buffer metadata
if the packet is GSO/IPIP to be handled accordingly.
Type: improvement
Change-Id: I17f5d71bf4c5f43a85ca3f2fbebfa1426b42ef69
Signed-off-by: Arthur de Kerhor <arthurdekerhor@gmail.com>
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|