Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: refactor
Signed-off-by: Ondrej Fabry <ofabry@cisco.com>
Change-Id: Ib80a4d1f8bac5dc27db1aafe65165cbb509b4edf
|
|
In case of UDP length errors in udp_local node, these errors are
being lost and incomplete header may be advanced by wrong offset.
Fix it with only full packets processing and explicit error set
otherwise. Also, optimize two buffer loop perfomance into fast
path with both buffers are ok and slow path with one or none.
Type: fix
Change-Id: I6b7edc3eb5593981e55d7ae20d753c0fd1549d86
Signed-off-by: Vladislav Grishenko <themiron@yandex-team.ru>
|
|
wrk->event_elts has 5 elements if no user events
Type: fix
Signed-off-by: Xiaoming Jiang <jiangxiaoming@outlook.com>
Change-Id: Ib38fab422304efc470e20ccb7121442f05bf8bf3
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I45a524bebd2dc1e318fa8d2a645bfc769e1da840
|
|
Using pre-shared keys is usually a bad idea, one should use eg. IKEv2
instead, but one does not always have the choice.
For AES-CBC, the IV must be unpredictable (see NIST SP800-38a Appendix
C) whereas for AES-CTR or AES-GCM, the IV should never be reused with
the same key material (see NIST SP800-38a Appendix B and NIST SP800-38d
section 8).
If one uses pre-shared keys and VPP is restarted, the IV counter
restarts at 0 and the same IVs are generated with the same pre-shared
keys materials.
To fix those issues we follow the recommendation from NIST SP800-38a
and NIST SP800-38d:
- we use a PRNG (not cryptographically secured) to generate IVs to
avoid generating the same IV sequence between VPP restarts. The PRNG is
chosen so that there is a low chance of generating the same sequence
- for AES-CBC, the generated IV is encrypted as part of the message.
This makes the (predictable) PRNG-generated IV unpredictable as it is
encrypted with the secret key
- for AES-CTR and GCM, we use the IV as-is as predictable IVs are fine
Most of the changes in this patch are caused by the need to shoehorn an
additional state of 2 u64 for the PRNG in the 1st cacheline of the SA
object.
Type: improvement
Change-Id: I2af89c21ae4b2c4c33dd21aeffcfb79c13c9d84c
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Error counters are added on a per-node basis. In Ipsec, it is
useful to also track the errors that occured per SA.
Type: feature
Change-Id: Iabcdcb439f67ad3c6c202b36ffc44ab39abac1bc
Signed-off-by: Arthur de Kerhor <arthurdekerhor@gmail.com>
|
|
To allow a more flexible throttling configuration, the number of bits
used in the throttling bitmap can be chosen.
Type: improvement
Signed-off-by: Maxime Peim <mpeim@cisco.com>
Change-Id: I7bfe391dd64729011b03f3e5b89408dfc340e036
|
|
Type: feature
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: I02d9bb5292b32ffb1b2f05daccd8a7d5dba05125
|
|
Previously, even if sa defined traffic selectors esp packet src and dst
have been used for fast path inbound spd matching. This patch provides
a fix for that issue.
Type: fix
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
Change-Id: Ibd3ca224b155cc9e0c6aedd0f36aff489b7af5b8
|
|
In a case where one pounds on a single kvp in a KVP_AT_BUCKET_LEVEL
table, the code would sporadically return a transitional value (junk)
from a half-deleted kvp. At most, 64-bits worth of the kvp will be
written atomically, so using memset(...) to smear 0xFF's across a kvp
to free it left a lot to be desired.
Performance impact: very mild positive, thanks to FC for doing a
multi-thread host stack perf/scale test.
Added an ASSERT to catch attempts to add a (key,value) pair which
contains the magic "free kvp" value.
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I6a1aa8a2c30bc70bec4b696ce7b17c2839927065
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I2b426e9e988c32d261f36367087f358d8cc25e2f
|
|
Rename unused SESSION_IO_EVT_BUILTIN_TX to SESSION_IO_EVT_TX_MAIN and
leverage it for non-connected udp tx.
Non-connected udp sessions are listeners and are therefore allocated on
main thread. Consequently, whenever session queue node is not polling
main, tx events generated by external applications might be missed or
processed with some delay. To solve this, request that apps use
SESSION_IO_EVT_TX_MAIN tx events as opposed to SESSION_IO_EVT_TX and
send that to first worker as opposed to main.
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I5df5ac3dc80c0f192b2eefb1d465e9deefe8786b
|
|
Specify the number of max_batches when applying for dma config.
Skip this round when no batch available from vlib_dma_batch_new.
Type: improvement
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Change-Id: Ic6e0acf81ba4fc3ed33aea6ac6990ef841021c59
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Id87c41c472898d4f66b0771f18f822d1069bbfd0
|
|
Make sure endpoint freelist is drained before alloc of fixed local
source port is tried.
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I302deee5609a463af8135185af71722ac8c55a27
|
|
Type: fix
Fixes: ab4d917
Change-Id: I226044f64e1577033798fd203a2e981c894830d6
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
udp_output_get_connection handles correctly if the connection
is a listener whereas udp_connection_get does not which may lead
to a crash.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I40b57287a8686820d29872cae2cfd6ae27a57c26
|
|
For non-connected udp, when retrieving the subscriber session to send
the notification, it uses the current worker thread index whereas the
subscriber session is actually on the main thread. Using the worker
thread may cause a crash since the corresponding session may not be
valid in the worker thread context and even if it is valid, it is the
wrong session. This scenario is seen when the application forks
and adds subscribers to the worker thread session.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I236ee9d9ff9f3b2f7f9f8e782d70d1080aa1b627
|
|
format_udp_connection takes 2 arguments from the caller.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: Ie618a809936a01c094982f9a8c81309826e0b087
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: If223096cf912c1748ae417b40585a9bea5d9d9a9
|
|
There's a chance that vnet_sw_interface_set_flags_helper()
has successfully called some sw interface add callback functions
before returning the error. So the sw interface del callbacks
should also be called
Type: fix
Signed-off-by: varasteh <mahdy.varasteh@gmail.com>
Change-Id: I2cd7dc6d5b3a5ebfd2c4d1a6be5390083dee6401
Signed-off-by: varasteh <mahdy.varasteh@gmail.com>
|
|
Type: style
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I6399ad2b0b30f94c6c51db1afc39f5e875dfaa67
|
|
IV requirements vary wildly with the selected mode of operation. For
example, for AES-CBC the IV must be unpredictable whereas for AES
counter mode (CTR or GCM), it can be predictable but reusing an IV with
the same key material is catastrophic.
Because of that, it is hard to generate IV in a generic way, and it is
better left to the crypto user (eg. IPsec).
Type: improvement
Change-Id: I32689c591d8c6572b8d37c4d24f175ea6132d3ec
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
This patch introduces IP in IP packet support for flow cli and dpdk plugin.
Specifically, the following IP in IP packet types are supported:
MAC-IPv4-IPv4-TCP/UDP/None,
MAC-IPv4-IPv6-TCP/UDP/None,
MAC-IPv6-IPv4-TCP/UDP/None,
MAC-IPv6-IPv6-TCP/UDP/None,
IP in IP flow rules can be created by using the following new keywords in vppctl:
in-src-ip, in-dst-ip : to provide information for inner IPv4 header
in-ip6-src-ip, in-ip6-dst-ip: to provide information for inner IPv6 header
in-proto : to specify inner transport layer protocol type (TCP or UDP)
in-src-port, in-dst-port : to provide information for inner TCP/UDP header
An example to create flow rule for MAC-IPv6-IPv6-TCP:
test flow add index 0 ip6-src-ip any ip6-dst-ip any in-ip6-src-ip any in-ip6-dst-ip any in-proto tcp in-src-port 1234 in-dst-port any rss function default
Another example to create flow rule for MAC-IPv6-IPv6:
test flow add index 0 ip6-src-ip any in-ip6-src-ip any rss function default
Type: feature
Signed-off-by: Xinyao Cai <xinyao.cai@intel.com>
Change-Id: I6a1ca36d47eb65b9cb5a4b8d874b2a7f017c35cd
|
|
Type: improvement
Change-Id: Ib98eba146e24e659acf3b9a228b81fcd641f4c67
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
operation using (a^a)^(b^b)
Type: fix
Signed-off-by: lijinhui <lijh_7@chinatelecom.cn>
Change-Id: I80783eed2b819a9e6fd4cee973821c9d97c285a6
|
|
Type: docs
Fixes: 33909777c637 ("misc: unify pcap rx / tx / drop trace")
Signed-off-by: Nobuhiro MIKI <nmiki@yahoo-corp.jp>
Change-Id: I049616cfad300658e62e5026c0655ee6f07a2421
|
|
Change-Id: I431c4a6f409b129e4290dba2e1acadea460ac797
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
Type: improvement
|
|
Move port allocation logic from transports into generic transport layer.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I55a21f185d00f5e118c36bcc4a6ffba2cbda885e
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I27112947071a757065162f0e50f69983d258525d
|
|
Type: fix
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: I9f4944f77ecf94f16f809392f28466e33f7f779d
|
|
Make sure applications, especially builtin ones, cannot close a session
multiple times.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I960a1ae89a48eb359e7e1873a59d47c298c37ef1
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I70596ffcf90fa4cd57092584cb7a454f44208943
|
|
Can to define src ip of outer IPv6 Hdr for each encap policy.
Along with that, I decided to develop it as API version V2.
This is useful in the SRv6 MUP case.
For example, it will be possible to handle multiple UPF destinations.
Type: feature
Change-Id: I44ff7b54e8868619069621ab53e194e2c7a17435
Signed-off-by: Takeru Hayasaka <hayatake396@gmail.com>
|
|
Allow apps/vcl to provide updated local ips for dgrams. In particular,
allow sessions bound to 0/0 to send data with valid local ips.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I50a086b1c252731a32a15b6a181ad3dba0c687e0
|
|
Type: improvement
With this change, add support for dumping IPv6 Router Advertisements
details on a per-interface basis (or all). Also, cover that with a test.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I89fa93439d33cc36252377f27187b18b3d30a1d4
|
|
For AES-CBC, the IV must be unpredictable (see NIST SP800-38a Appendix
C). Chaining IVs like is done by ipsecmb and native backends for the
VNET_CRYPTO_OP_FLAG_INIT_IV is fully predictable.
Encrypt a counter as part of the message, making the (predictable)
counter-generated IV unpredictable.
Fixes: VPP-2037
Type: fix
Change-Id: If4f192d62bf97dda553e7573331c75efa11822ae
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Change-Id: I7bd2696541c8b3824837e187de096fdde19b2c44
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: If5300653edd2dad470985f4591959d00cad2a43b
|
|
If we match a next table, we must save its index in the trace instead of
the index of the 1st table.
Type: fix
Change-Id: Idd862242e7fc200eb3ab29b17a26131b844af2c0
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Policer API calls were only by policer name. It is now possible to
select a policer by its index.
Some functionalities are also added to allow updating a policer
configuration and to refill its token buckets.
Some dead codes are being removed, and small fixes made.
Type: improvement
Signed-off-by: Maxime Peim <mpeim@cisco.com>
Change-Id: I4cc8fda0fc7c635a4110da3e757356b150f9b606
|
|
adj_delegate_remove() makes 'ad' invalid, invalidate it only after its
use.
Type: fix
Change-Id: I6908d3dd2962ebd3fdf37e946cb19dae727bda09
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: improvement
Change-Id: I12b120d988347cced3df82810e86dc2fd5cfca80
Signed-off-by: Damjan Marion <dmarion@me.com>
|
|
Allow enabling and disabling pcap capture via the API.
A little bug is fixed along the way in
vl_api_classify_pcap_set_table_t_handler.
Type: improvement
Signed-off-by: Maxime Peim <mpeim@cisco.com>
Change-Id: I096129c82aecdc82bee5dbfb5e19c76a51d80aab
|
|
Enable codegen for C type from 'rpc A returns B stream C' notation
Type: improvement
Change-Id: I05cfce71c385d414d7b177a080009628bc8c8fad
Signed-off-by: Stanislav Zaikin <zstaseg@gmail.com>
|
|
per https://jira.fd.io/browse/VPP-2058
Type: improvement
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: Ica0828de218d25ada2d0d1491e373c3b78179ac1
|
|
Type: fix
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I64283648985c98e81f315da32a451cef6e60f933
|
|
path implementation
In fast path implementation of spd policy lookup opposite convention to
the original implementation has been applied and local ip range has been
interchanged with the remote ip range. This fix addresses this issue.
Type: fix
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
Change-Id: I0b6cccc80bf52b34524e98cfd1f1d542008bb7d0
|
|
Type: improvement
Change-Id: I30e66370c927afeb62ba3a2b3334bdc2a31d4561
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
This patch removes a
.runs_after = VNET_FEATURES ("ip6-lookup"),
On the 'pt' node, as 'ip6-lookup' does not belong to the 'ip6-output' arc.
Type: fix
Change-Id: Ie34aaf7351593f08c61e3b02aaf9f72a4de1a437
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|