summaryrefslogtreecommitdiffstats
path: root/src/vnet
AgeCommit message (Collapse)AuthorFilesLines
2022-02-05session: track bytes dequeued in snd paramsFlorin Coras3-4/+6
Also reset send params flags before calling transports to avoid explicit resets in all transports. Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I1da7b3fab009728e7fee4199425ced933fa8a122
2022-02-03ip nat: use ip rx sw_if_index in ip-local arc startFlorin Coras2-9/+8
This also changes the behavior of the nat44-ei hairpinning feature. Rather then enabling the feature on every nat interface, it is enabled only on local0. Type: improvement Signed-off-by: Filip Varga <fivarga@cisco.com> Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I4e16a83c9e328aa75fc61df508b620ef743ca775
2022-02-02bfd: restore the data within the packet after hash verificationAndrew Yourtchenko1-0/+5
The BFD delayed auth change test was failing intermittently within CI. Debugging has shown it depends on the initial random seed, e.g. the below will consistently fail: RND_SEED=1643734669.7126195 TEST='bfd.BFDAuthOnOffTestCase.test_auth_change_key_delayed' Same thing will happen with: RND_SEED=1643736595.1363552 RND_SEED=1643722239.8224792 The analysis of the behavior shown that the function that is doing the hash verification, modifies the content of the packet for the purposes of hash computation. In case of the auth rollover, this function may be called twice - resulting in the second comparison to be made with a bogus packet data, thus failing the check and the test. The above values of random seed are the ones where the test makes it to the point of this double comparison. The solution is to restore the data within the packet after the check from the array where we have copied it into before modifying the packet. Change-Id: Ibb09beb4b1230032db04527bbf38fa335651866b Type: fix Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2022-02-01gso: remove the assert if packet is geneve or gre encapedMohsin Kazmi1-4/+0
Type: fix Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com> Change-Id: I3265d4a3843b07c2e0050e297f1e014fc5b31cf7
2022-02-01virtio: coverity woes -- divide by zeroSteven Luong1-0/+7
Coverity complains the expression, j % vif->num_txq, may encounter divide by zero. While there is little chance that vif->num_txq is zero, it is easy to prevent divide by zero if vif->num_txq is ever zero. Type: fix Fixes: I337ec63d0868f665329d68eadf1744e080b73a0d Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: I2e91f296737ce266ab70fffc1f442cc600724fa2
2022-01-31ip: reassembly - add a way to disable for forusKlement Sekera11-34/+305
Add API to disable full reassembly of "forus" packets. Mark packets passing through ip[4|6]-local nodes with a new buffer flag and check for that flag in reassembly. Enable IP6 "forus" full reassembly by default to be consistent with existing IP4 setting. Type: improvement Change-Id: I7067792fcd4304182654237968e4c4d9293c6143 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2022-01-31ip: fix length calculation in ip6-receiveKlement Sekera1-1/+1
Replace unconditional usage of buffer->total_length_not_including_first_buffer with a logic checking whether that length is set to a valid value. Type: fix Fixes: 17478e4eb81d384f171ca27c9110a051cd434f16 Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: I161d0957d62cc23826edd821aa5560bcfc5c1a33
2022-01-25ip: reassembly - fix missing ip6 owner thread initKlement Sekera1-0/+1
Initialize ip6 memory owner thread index in reassembly context to avoid unnecessary handovers. Type: fix Fixes: 630ab5846bceddf8d663e9f488a2dc0378949827 Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: I2996caf1f82a0649c97d481b74dce24a96dce326
2022-01-25bonding: refactor bonding hash functions to vnet/hashSteven Luong5-294/+409
- move bonding hash functions to vnet/hash - register the corresponding hash function when the bond interface is created - remove floating point vec256 usage - split bond_tx_inline into bond_tx_hash and bond_tx_no_hash Type: refactor Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: I1698023c48470290d11c9b2bd00996eee9aa079d
2022-01-24policer: fix memory leakLeung Lai Yung1-1/+4
Type: fix policer_add_del does not free "clib_error_t*" when it is not null. Signed-off-by: Leung Lai Yung <benkerbuild@gmail.com> Change-Id: I00ad8e53797e46adeb1819856262bb9f3c068c63
2022-01-24sr: fix coverity warningKlement Sekera2-7/+0
Remove dead code. Pool element cannot be NULL. Type: fix Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: I7812efdcdc414af8352474c4e527c878d2e2c459
2022-01-24ip6-nd: fix coverity warningKlement Sekera1-6/+3
Restructure code to avoid NULL dereference. Type: fix Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: If3a4319f1b93af272b7b315a9b15ba4ee1f8e7ae
2022-01-22session: separate transports from apps in show cliFlorin Coras1-11/+11
Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: If9d6153ddce836ec34842fb5e581b2f4565e33df
2022-01-22session: update time for list of subscribersFlorin Coras4-1/+53
Instead of constantly scanning all transport vfts for update time functions, build list at transport enable time. Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Id5c07cc03ee1fdd072ebbbd40119d1a440a5e3b1
2022-01-21wireguard: add async mode for encryption packetsGabriel Oginski1-9/+10
Originally wireguard doesn't support async mode for encryption packets. This patch add async mode for encryption in wireguard and also adds support chacha20-poly1305 algorithm in cryptodev for async handler. In addition it contains new command line to activate async mode for wireguard: set wireguard async mode on|off and also add new command to check active mode for wireguard: show wireguard mode Type: improvement Signed-off-by: Gabriel Oginski <gabrielx.oginski@intel.com> Change-Id: I141d48b42ee8dbff0112b8542ab5205268089da6
2022-01-20fib: missing includeDamjan Marion1-0/+1
Type: fix Change-Id: Idefded3443b383ba916a66051b003aac106af8e8 Signed-off-by: Damjan Marion <damarion@cisco.com>
2022-01-20http: add http protocol pluginFlorin Coras2-4/+3
Basic HTTP/1.1 server side implementation. Type: feature Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I06bddaf7f11e28db802b4cd7ef8160c78cb019b6
2022-01-18misc: fix coverity warningsDave Barach1-0/+6
Type: fix Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I8ea0193ebb2a721a0582451ffd64c4063ac6d233
2022-01-18virtio: remove admin-up flag during interface creationMohsin Kazmi2-4/+0
Type: fix During the interface creation time, (by default) admin-up flag is locally set for tap and virtio interfaces. While, in VPP the state of these interfaces are still admin-down. User needs to explicitly call 'set interface state <interface-name> up' to admin-up the newly created tap or virtio interface(s) in VPP. So, this behavior is inconsistent. This patch fixes the issue to have consistent behavior for given interface between local and global administration state. Change-Id: Ifd8904a09fbdbe7b386874ac3231dc0527064518 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2022-01-18vnet: distinguish between max_frame_size and MTUDamjan Marion11-67/+77
Type: improvement Change-Id: I3659de6599f402c92e3855e3bf0e5e3388f2bea0 Signed-off-by: Damjan Marion <damarion@cisco.com>
2022-01-17ipsec: IPSec interface correct drop w/ no protectionNeale Ranns3-8/+19
Type: improvement When an IPSec interface is first constructed, the end node of the feature arc is not changed, which means it is interface-output. This means that traffic directed into adjacencies on the link, that do not have protection (w/ an SA), drop like this: ... 00:00:01:111710: ip4-midchain tx_sw_if_index 4 dpo-idx 24 : ipv4 via 0.0.0.0 ipsec0: mtu:9000 next:6 flags:[] stacked-on: [@1]: dpo-drop ip4 flow hash: 0x00000000 00000000: 4500005c000100003f01cb8cac100202010101010800ecf40000000058585858 00000020: 58585858585858585858585858585858585858585858585858585858 00:00:01:111829: local0-output ipsec0 00000000: 4500005c000100003f01cb8cac100202010101010800ecf40000000058585858 00000020: 5858585858585858585858585858585858585858585858585858585858585858 00000040: 58585858585858585858585858585858585858585858585858585858c2cf08c0 00000060: 2a2c103cd0126bd8b03c4ec20ce2bd02dd77b3e3a4f49664 00:00:01:112017: error-drop rx:pg1 00:00:01:112034: drop local0-output: interface is down although that's a drop, no packets should go to local0, and we want all IPvX packets to go through ipX-drop. This change sets the interface's end-arc node to the appropriate drop node when the interface is created, and when the last protection is removed. The resulting drop is: ... 00:00:01:111504: ip4-midchain tx_sw_if_index 4 dpo-idx 24 : ipv4 via 0.0.0.0 ipsec0: mtu:9000 next:0 flags:[] stacked-on: [@1]: dpo-drop ip4 flow hash: 0x00000000 00000000: 4500005c000100003f01cb8cac100202010101010800ecf40000000058585858 00000020: 58585858585858585858585858585858585858585858585858585858 00:00:01:111533: ip4-drop ICMP: 172.16.2.2 -> 1.1.1.1 tos 0x00, ttl 63, length 92, checksum 0xcb8c dscp CS0 ecn NON_ECN fragment id 0x0001 ICMP echo_request checksum 0xecf4 id 0 00:00:01:111620: error-drop rx:pg1 00:00:01:111640: drop null-node: blackholed packets Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I7e7de23c541d9f1210a05e6984a688f1f821a155
2022-01-17interface: improve MTU handlingDamjan Marion5-29/+47
- per hw-interface-class handlers - ethernet set_mtu callback - driver can now refuse MTU change Type: improvement Change-Id: I3d37c9129930ebec7bb70caf4263025413873048 Signed-off-by: Damjan Marion <damarion@cisco.com>
2022-01-17vnet: introduce vnet_error()Damjan Marion9-175/+259
Decouples vnet return values from API return codes. New vnet_error() creates vnet_error_t whicgh contains both vnet function return value and return string. vnet_api_error() converts vlib_error_t constructed with vnet_error() to API return value. Type: improvement Change-Id: I17042954d48c010150fc1dfc5fce9330e8149e87 Signed-off-by: Damjan Marion <damarion@cisco.com>
2022-01-16vppinfra: bitops cleanupDamjan Marion2-3/+2
Type: refactor Change-Id: I7fa113e924640f9d798c1eb6ae64b9c0a9e2104c Signed-off-by: Damjan Marion <damarion@cisco.com>
2022-01-12session: pass tx buffers in bulk to transportsFlorin Coras6-22/+83
Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I1025cccd784f80b557847f69c3ea1ada5c9de60d
2022-01-12ip: coverity illegal access in ip6_ext_header_walkOle Troan1-9/+2
*** CID 243670: Memory - illegal accesses (OVERRUN) /src/vnet/ip/ip6_packet.h: 713 in ip6_ext_header_walk() CID 243670: Memory - illegal accesses (OVERRUN) Overrunning array "res->eh" of 4 4-byte elements at element index 5 (byte offset 23) using index "i" (which evaluates to 5). Type: fix Fixes: 03092c1 Change-Id: I27e0435cf10534f3b41e11bf7a5629b5428b0651 Signed-off-by: Ole Troan <ot@cisco.com>
2022-01-12crypto: omit loop iterationDastin Wilski1-4/+6
This fix adds check that will omit loop iteration in case dequeue handler is zero. Type: fix Signed-off-by: Dastin Wilski <dastin.wilski@gmail.com> Change-Id: I7526e3fe7d8c8da9662b4e9204efd5e2d8be1908
2022-01-11linux-cp: Add VPP->Linux synchronizationPim van Pelt2-1/+46
Part 1 -- notes in https://ipng.ch/s/articles/2021/08/13/vpp-2.html Add the ability for VPP to copy out (sync) its state from the dataplane to Linux Interface Pairs, when they exist. Gated by a configuration flag (linux-cp { lcp-sync }), and by a CLI option to toggle on/off, synchronize the following events: - Interface state changes - Interface MTU changes - Interface IPv4/IPv6 address add/deletion In VPP, subints can have any link state and MTU, orthogonal to their phy. In Linux, setting admin-down on a phy forces its children to be down as well. Also, in Linux, MTU of children must not exceed that of the phy. Add a state synchronizer which walks over phy+subints to ensure Linux and VPP end up in the same consistent state. Part 2 -- notes in https://ipng.ch/s/articles/2021/08/15/vpp-3.html Add the ability for VPP to autocreate sub-interfaces of existing Linux Interface pairs. Gated by a configuration flag (linux-cp { lcp-auto-subint }), and by a CLI option to toggle on/off, synchronize the following event: - Sub-interface creation (dot1q, dot1ad, QinQ and QinAD) A few other changes: - Add two functions into netlink.[ch] to delete ip4 and ip6 addresses. - Remove a spurious logline (printing MTU) in netlink.c. - Resolve a TODO around vnet_sw_interface_supports_addressing() Type: improvement Signed-off-by: Pim van Pelt <pim@ipng.nl> Change-Id: I34fc070e80af4013be58d7a8cbf64296cc760e4e Signed-off-by: Pim van Pelt <pim@ipng.nl>
2022-01-11misc: fix the uninitialization errorMohsin Kazmi1-1/+1
Type: fix | src/vppinfra/vector/toeplitz.c:69:9: error: ‘kv’ may be used uninitialized in this function [-Werror=maybe-uninitialized] | src/vppinfra/memcpy_x86_64.h:45:17: error: ‘*((void *)&key+16)’ may be used uninitialized in this function [-Werror=maybe-uninitialized] | *(u8x16u *) d = *(u8x16u *) s; | ~~~~~~~~~~~~~~^~~~~~~~~~~~~~~ | src/vnet/gre/interface.c:356:20: note: ‘*((void *)&key+16)’ was declared here Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com> Change-Id: I71614da2821ebda5200a0cb9437a7aad0c42fbb2
2022-01-11session: increase postponed mq message min sizeFlorin Coras2-1/+2
Reported by coverity Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Ib1db0d120321b061f4c2c20117acdfb6e7dc0626
2022-01-10session: fix segment manager format coverity warningFlorin Coras1-3/+3
Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Ia32536a76aa3f92f80ee2cd027a9a010c19b861a
2022-01-10interface: refactor interface capabilities code, part 2Damjan Marion4-57/+57
Type: improvement Signed-off-by: Damjan Marion <damarion@cisco.com> Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com> Change-Id: Ie595e69af8657b0ee18a84ac71c5d433108d9ef8
2022-01-10session: allow pacer to send when bucket hits 0Florin Coras1-2/+2
So after bucket reset session can send max burst of bytes. Also, reset pacer bucket to 0 not min burst Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Iced8948c407e6647e6eb4caff5c62c06d45ce0bf
2022-01-10session: deschedule sessions with no data to sendFlorin Coras3-3/+26
This ensures the scheduler always tracks sessions that are descheduled, i.e., do not have events in the old io events list. When app retries to send, clear descheduled flag and potentially the pacer. Consequently, transports no longer need to reset the pacer when sessions are rescheduled after a long app tx pause. This also fixes a tcp bug whereby the pacer was reset too often when snd_una was equal to snd_nxt as there was no way to distinguish betwen app tx breaks and congestion. Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Id3cc6c98cd76299e15030e504380dcf3c04c5189
2022-01-10session: fix pacer bucket update castFlorin Coras1-2/+2
Make sure comparison is done between two i64 values. Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Ief5706f2bd9415587994a5b665d5e380b8e14f68
2022-01-09fib: multiple memory leaks upon deleting a VRF tableSteven Luong4-15/+25
fib_table->ft_locks name string for parsing the ip table add|del name <tag> command path list for ip4_specials in mfib mfib->fib_entry_by_dst_address[0..32] mfib entry path_ext, msrc->mfes_exts Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: Ia1e0cac577a73608ee1e4b1664b60a66322e81ce
2022-01-07tcp: fix cubic cwnd accumulate use of bytes ackedFlorin Coras1-1/+1
Use what was provided instead of tc->bytes_acked Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I0ed736d2ee247e231fccdf4a969fcf6bc15b7978
2022-01-07bonding: memory leak on parsing bad CLI commandSteven Luong1-4/+10
When parsing bad "create bond" command, we should call unformat_free prior to return Type: fix Fixes: 9cd2d7a5a4fafadb65d772c48109d55d1e19d425 Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: I8f20a0e7f29de670e09633880d0aa50a51444e11
2022-01-07ethernet: new interface registration functionDamjan Marion14-158/+100
Prep for supporting multiple callbacks, optional args, etc. Type: improvement Change-Id: I96244c098712e8213374678623f12527b0e7f387 Signed-off-by: Damjan Marion <damarion@cisco.com>
2022-01-06tcp: optimize newreno cong ack handlerFlorin Coras1-19/+20
Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I196ee5f4630cec637245493f370b5f83a939fe44
2022-01-06tcp: update snd_congestion only during congestionFlorin Coras3-31/+14
If running without sacks, if snd_una does not cover snd_congestion fast recovery can be missed but the two heuristics from RFC6582 should avoid that. Also snd_congestion was used as a means of inferring if the connection recently exited congestion while setting the persist timer but that does not always work correctly if not congested. Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I94d4ac738cdd4f7f23f62e97dd63059de1cd4af9
2022-01-06tcp: mark lost first sack hole on timeoutFlorin Coras3-1/+27
Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I1abff943f3fe3ff0219126b5b8beded4ad859758
2022-01-06tcp: handle start tx event in cubicFlorin Coras1-0/+18
If app was idle update start time of current congestion avoidance phase unless tcp connection was not idle. Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Idf6a03a9ef96c409462de9f9cb19df609f730afe
2022-01-06tcp: always exit recovery if not in fastrecoveryFlorin Coras1-3/+3
Stay in fast recovery only if it's already on. Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Idcdbbacfed3e5f3c991fa293c532be1c671f5217
2022-01-06tcp: exit retransmit before processing feedbackFlorin Coras1-21/+17
Type: refactor Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I5838e4c370d0c02a21b5eadb4af3baae781df097
2022-01-06tcp: use bytes delivered to compute cwndFlorin Coras3-7/+9
Should estimated cwnd better with loss Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Idd75d40dbab212ac0a5d533009c5540b1a58f4c4
2022-01-06tcp: cast timer ticks to u32Florin Coras3-7/+8
tc->rto * TCP_TO_TIMER_TICK can return garbage if not cast to u32 and that confuses clib_max Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> signed-off-by: Vipul Agrawal <Vipul.Agrawal@enea.com> Change-Id: Ief4d29b9625e2ef2e75e0c7e3d731ab147465f6d
2022-01-06tap: add num_tx_queues APINathan Skrzypczak5-5/+181
This adds a create_tap_v3 api that has a num_tx_queues parameter allowing to create more than num_workers queues, following on multi TX support Type: feature Change-Id: Idce433147e8dd165f842241d6c76e041e1b1c9b8 Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2022-01-05interface: refactor interface capabilities codeDamjan Marion15-122/+186
Make it shorter to type, easier to debug, make adding callbacks in future simpler. Type: improvement Change-Id: I6cdd6375e36da23bd452a7c7273ff42789e94433 Signed-off-by: Damjan Marion <damarion@cisco.com>
2022-01-05crypto: encrypt/decrypt queues sw_schedulerJakub Wysocki4-34/+99
Type: improvement Previously multiple sw crypto scheduler queues per core design caused unaverage frame processing rate for each async op ID – the lower the op ID is the highly likely they are processed first. For example, when a RX core is feeding both encryption and decryption jobs of the same crypto algorithm to the queues at a high rate, in the mean time the crypto cores have no enough cycles to process all: the jobs in the decryption queue are less likely being processed, causing packet drop. To improve the situation this patch makes every core only owning a two queues, one for encrypt operations and one for decrypt. The queue is changed either after checking each core or after founding a frame to process. All crypto jobs with different algorithm are pushed to thoses queues and are treated evenly. In addition, the crypto async infra now uses unified dequeue handler, one per engine. Only the active engine will be registered its dequeue handler in crypto main. Signed-off-by: DariuszX Kazimierski <dariuszx.kazimierski@intel.com> Signed-off-by: PiotrX Kleski <piotrx.kleski@intel.com> Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com> Signed-off-by: Jakub Wysocki <jakubx.wysocki@intel.com> Change-Id: I517ee8e31633980de5e0dd4b05e1d5db5dea760e