Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: feature
The added functionality is to support copying TTL and flow label from
inner to outer. The .api was extened to support expressing this and also
adding a common tunnel endpoint type. i find it best to make API changes
in one patch so there are less versions of the API.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I755c1e3f4c475058792af39c1abeda92129efb76
|
|
Change-Id: I59f55db7209549ad43a1205470a2f5ea9ea8a1c7
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
Type: feature
|
|
The check in listen state that the listener is not valid is not enough
if the time wait session's index overlaps an actual listener's index.
Thanks wanghanlin@corp.netease.com for the report!
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I3dff0cb134940a8265ff908faa607c67dba5e56b
|
|
Type: fix
Set the GSO flag when buffer length exceeds the
linux mtu. Don't listen for mtu changes on linux
side for now.
This also fixes a TX issue, as we only search for
valid frames on tx to the extent of n_left, we might
stay stuck.
Change-Id: Idf0bdd88990254a614962c2f7bc3e0292ccfd61a
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Avoid synchronizing producers and the consumer. Instead, only use mutex
or spinlock (if eventfds are configured) to synchronize producers.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ie2aafbdc2e07fced5d5e46ee2df6b30a186faa2f
|
|
Type: refactor
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Iae135cbca372def29b1dd5e9f29b7db546ef1a3e
|
|
A NAT sub-plugin doing statically configured match/rewrite on IP4 input or output.
It's stateless (no connection tracking).
Currently it supports rewriting of SA, DA and TCP/UDP ports.
It should be simple to add new rewrites if required.
API:
pnat_binding_add, pnat_binding_del, pnat_bindings_get, pnat_interfaces_get
CLI:
set pnat translation interface <name> match <5-tuple> rewrite <5-tuple> {in|out} [del]
show pnat translations
show pnat interfaces
Trying a new C based unit testing scheme. Where the graph node is tested
in isolation. See pnat/pnat_test.c.
Also added new cmake targets to generate coverage directly.
E.g.:
make test_pnat-ccov-report
File '/vpp/sdnat/src/plugins/nat/pnat/pnat.c':
Name Regions Miss Cover Lines Miss Cover
------------------------------------------------------------------------------------
pnat_interface_by_sw_if_index 39 8 79.49% 13 0 100.00%
pnat_instructions_from_mask 9 0 100.00% 13 0 100.00%
pnat_binding_add 64 8 87.50% 31 2 93.55%
pnat_flow_lookup 4 4 0.00% 10 10 0.00%
pnat_binding_attach 104 75 27.88% 33 6 81.82%
pnat_binding_detach 30 5 83.33% 23 2 91.30%
pnat_binding_del 97 33 65.98% 17 3 82.35%
pnat.c:pnat_calc_key_from_5tuple 9 1 88.89% 14 1 92.86%
pnat.c:pnat_interface_check_mask 10 2 80.00% 11 2 81.82%
pnat.c:pnat_enable 5 0 100.00% 11 0 100.00%
pnat.c:pnat_enable_interface 107 26 75.70% 60 15 75.00%
pnat.c:pnat_disable_interface 91 30 67.03% 32 7 78.12%
pnat.c:pnat_disable 7 2 71.43% 13 7 46.15%
------------------------------------------------------------------------------------
TOTAL 576 194 66.32% 281 55 80.43%
File '/vpp/sdnat/src/plugins/nat/pnat/pnat_node.h':
Name Regions Miss Cover Lines Miss Cover
------------------------------------------------------------------------------------
pnat_test.c:pnat_node_inline 67 11 83.58% 115 1 99.13%
pnat_test.c:pnat_calc_key 9 2 77.78% 14 2 85.71%
pnat_test.c:pnat_rewrite_ip4 55 11 80.00% 60 12 80.00%
pnat_test.c:format_pnat_trace 1 1 0.00% 12 12 0.00%
pnat_node.c:pnat_node_inline 63 63 0.00% 115 115 0.00%
pnat_node.c:pnat_calc_key 9 9 0.00% 14 14 0.00%
pnat_node.c:pnat_rewrite_ip4 55 55 0.00% 60 60 0.00%
pnat_node.c:format_pnat_trace 5 5 0.00% 12 12 0.00%
------------------------------------------------------------------------------------
TOTAL 264 157 40.53% 402 228 43.28%
Type: feature
Change-Id: I9c897f833603054a8303e7369ebff6512517c9e0
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Type: feature
Change-Id: I9f7742cb12ce30592b0b022c314b71c81fa7223a
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: feature
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Change-Id: I982205b48615395f19cbb36c73854fb5c3db45e8
|
|
Type: improvement
Signed-off-by: Artem Glazychev <artem.glazychev@xored.com>
Change-Id: Ie30d51ab4df5599b52f7335f863b930cd69dbdc1
|
|
Type: fix
Signed-off-by: Tetsuya Murakami <tetsuya.mrk@gmail.com>
Change-Id: Ia12feee9e46d4951519d5c6f9d1a21d89701dc0f
Signed-off-by: Tetsuya Murakami <tetsuya.mrk@gmail.com>
|
|
Type: fix
MPLS hash includes the IP hash at the bottom of the stack. Default this
to the IP default and use the value passed in to the compute function.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I3f8cb0f7c4fe98ea903a752c2b5fd3d7e26d449a
|
|
Type: fix
This reverts commit 5a48b3b9d88fa2793793e2bf3db8bf156fe2951f.
Change-Id: Ifa91b18bdbbc32bb729abc09d95637d9cdf42c3b
Signed-off-by: Damjan Marion <damarion@cisco.com>
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Type: feature
please see FEATURE.yaml for details.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
Signed-off-by: Jon Loeliger <jdl@netgate.com>
Signed-off-by: Pim van Pelt <pim@ipng.nl>
Change-Id: I04a45c15c0838906aa787e06660fa29f39f755fa
|
|
Type: improvement
AN SA is uni-drectional therefore it can be used only for encrypt or
decrypt, not both. So it only needs one thread ID. free up some space on
the 1st cacheline.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I21cb7cff70a763cbe2bffead860b574bc80b3136
|
|
Previous commit broke naming of vxlan interfaces.
Type:fix
Fixes:a4b0541f6
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Change-Id: I5e304821be73547b4e47c35ad9632283f153830f
|
|
Add counters to the policer against each of the 3 possible results:
conform, exceed and violate.
Type: improvement
Signed-off-by: Brian Russell <brian@graphiant.com>
Change-Id: Ia98a2f5655df6873259197d6bbf0ff2709b7d60e
|
|
Type: improvement
1) stack the interpose on any path-extensions (e.g. labels) from the
next best source
2) allow more than 1 source to contribute a DPO for a given prefix
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Idc2fbb36cfbd2387081765d8af0f1fbe61612160
|
|
Type: fix
Interrupt are suppressed from kernel on tx path.
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I9f39f343b7e16bad09910766adf0b09654721f67
|
|
hi->name is a non-NULL-terminated vector.
Type: fix
Change-Id: I1a9f128f24f137b43cb47169677cc4288043fbd7
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Pass packets arriving at the ip[46] punt policer nodes to punt policer
handoff nodes if the worker thread they arrive on is not the same one
configured in the policer. Initially, the policer will be tied to the
worker thread that it first received a packet on. This will be expanded
in future to be a configuration API option.
Type: improvement
Signed-off-by: Brian Russell <brian@graphiant.com>
Change-Id: Ic39d936084c354af1859ad3d946da6cd0f6e34d9
|
|
Add thread handoff for packets being policed. Note that the handoff
currently requires the policer index to be passed in. This is suitable
for use in the ip[46] punt paths where each policer node will only
ever use a single policer. For the more general case, this will be
expanded in future to use a policer index stored in packet metadata.
Type: improvement
Signed-off-by: Brian Russell <brian@graphiant.com>
Change-Id: I85a0ecbcfb025f8844e763224cd3de1561249aca
|
|
The policer is not thread safe. In order that handoff could be
performed, add a frame queue to each of the punt policer nodes.
Type: improvement
Signed-off-by: Brian Russell <brian@graphiant.com>
Change-Id: Iee50267ee7e36f0e6c95b9b43bf651648198b834
|
|
Add a thread index field to the policer structure. The policer is not
thread safe. The thread index will be used to tie it to one worker
thread and other workers can use thread handoff.
Type: improvement
Signed-off-by: Brian Russell <brian@graphiant.com>
Change-Id: I650e983a9ed800bf660d6f06368717484c4a83bf
|
|
Type: feature
A device/router needs to have a unique ID which is included in the flow
has so that flows are not polarised through the network, i.e. each deice
in the network chooses the same nth link for the same flow.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I963e03674adbb085902b4084fdc4886b88f5734c
|
|
The check args->hwaddr is always true and it always copies the
mac address from args->hwaddr even though none was set.
Check args->use_custom_mac instead.
Type: fix
Fixes: gerrit 29970
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I0c51bf1ea79b02c4fbdc3c52e694f186bdd96600
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I6db15780d87426eee852aa020c50cbdf45dc1f95
|
|
Change-Id: I85a463b4ca15baf11e3eb70189f5190ba2585170
Type: refactor
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
|
|
Add separate queue implementation for the message queue as it's custom
tailored for fifo segments as opposed to binary api.
Also move eventfds to the private data structures.
Type: refactor
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I6df0c824ecd94c7904516373f92a9fffc6b04736
|
|
Propagate the multi-arch variant selection to interfaces.
Type: fix
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Change-Id: I99c4a7896f172f0d14d2ded22a27383825529a7d
|
|
We have accumulated several scenarios in prod or wishlists
where it would be useful to have a general infra to say yes/no
about a certain test, and potentially make decisions based on that,
for example:
- runs solo (aka 'time-dependent')
- (wishlist) part of quick smoke-test set
- (wishlist) intermittent failure unrelated to timing
- (wishlist) test broken with a multi-worker config in vpp
Refactor the current "run-solo" code to allow for this extension.
Type: test
Change-Id: Ia5b3810e57c0543753c8e0dc4dc0cfb4a30b36ac
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: Ic977ffe761efc2129c61aec581da5479fe4838da
Type: fix
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
|
|
Change-Id: I03e164d8d5a329497f422e99f8b0058135241b4e
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
Type: fix
|
|
Change-Id: If8077280cef501599f810ad9255efa2a5a451ced
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
Type: improvement
|
|
Take into account pending interrupts when resizing rxq_interrupts
Type: fix
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
Change-Id: I64f6f4404738c90ed5a2c10d72c7ce59cf96a644
|
|
Type: improvement
Signed-off-by: Jakub Horn <jhorn@cisco.com>
Change-Id: I06401a8645615d139893dca27d07bb3b3214bea7
|
|
Type: fix
Change-Id: If35cf7da0c3d1b92532cc2e45c164d6b5a08592c
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: improvement
Change-Id: I4008cadfd5141f921afbdc09a3ebcd1dcf88eb29
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: refactor
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Ice2bc42838e6d5ba579f449c3f8b0feffebeb719
|
|
extends ip6_compute_flow_hash() to include IPv6 flowlabel in flowhash computation
Type: improvement
Signed-off-by: Ahmed Abdelsalam <ahabdels@cisco.com>
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Change-Id: Id1aaa20c9dac729c22b714eea1cdd6e9e4d1f75e
|
|
Type: fix
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Ib08fe356e4dc710dd60a96736c48b27129f06786
|
|
Type: fix
this means we 1) don't decrement TTL and (for v6) can fragment.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I0f718da7dcaba834ad495ae9242a9a58c9e7c184
|
|
Type: fix
Change-Id: Ib23f823e46494f80d9d857ddde88f4939bf2b3d1
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
When building with musl, the type `uint` is not available unless you
include <sys/types.h>.
Signed-off-by: Nathan Moos <nmoos@cisco.com>
Change-Id: I0003b0c373d9fd532b4135c43d78f36d6cd7afa4
|
|
Type: fix
Replace vnet_register_interface with ethernet_register_interface
Fixes https://jira.fd.io/browse/VPP-1962
Signed-off-by: Ed Warnicke <hagbard@gmail.com>
Change-Id: I5f578fc416605429fe1e2b510ad49eb754451d40
Signed-off-by: Ed Warnicke <hagbard@gmail.com>
|
|
Type: feature
Change-Id: I5739869490155b0b9674b4faf61882d97e66a4ed
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
vnet_crypto_is_set_handler() was checking if op handler is set by
using alg instead of op id.
This fix changes the check to use op ids from crypto_main's alg_data
for provided alg.
Signed-off-by: PiotrX Kleski <piotrx.kleski@intel.com>
Change-Id: I5f0f00a889ddada44d9912af175ebad66677037a
|
|
one cache line
Type: refactor
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Change-Id: I54128ba62f8dcc87c1845b33ed3637112d42a891
|
|
If classify pcap filter was never configured, typing the delete
command causes a crash. The reason is
cm->classify_table_index_by_sw_if_index not yet allocated.
The fix is to add a check before we access the vector.
Type: fix
Fixes: gerrit 28475
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: Ia33bd91fa82d8ffc4490d4069155980a6e233268
|
|
This change introduces flow concept to endpoint-dependent NAT. Instead
of having a session and a plethora of special cases in code for e.g.
hairpinning, twice-nat and others, figure all this out and store it in
flow logic. Every flow has a match and a rewrite part. This unifies all
the NAT packet processing cases into one - match a flow and rewrite the
packet based on that flow. It also provides a cure for hairpinning
dilemma where one part of the flow is on one worker and another on
a different one. These cases are also sped up by not requiring
destination adress lookup every single time to be able to rewrite source
nat as this is now part of flow rewrite logic.
Type: improvement
Change-Id: Ib60c992e16792ea4d4129bc10202ebb99a73b5be
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|