Age | Commit message (Collapse) | Author | Files | Lines |
|
Upon encapsulation of L2 frames, IETF has replaced the NextHeader value from 59 (IPv6 No Next Header) to 143 (Ethernet).
https://www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml
Type: fix
Signed-off-by: pcamaril <pcamaril@cisco.com>
Change-Id: I88aa5590c81d16700ff7a0bbe6337e113179496e
Signed-off-by: pcamaril <pcamaril@cisco.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ie8bc5c9a03e858487cf565b4e9b520e6b496337a
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I87940d02813b66616f1944e41b16c8cc16f5dac0
|
|
Type: feature
If set, avoid trying to cleanup the local endpoint table.
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Iaa382ae74523d608217d2d17544bf1e7d82b2728
|
|
Type: fix
Change-Id: I0c9640dab2c0eaba369bc8f3ff7ae56d8e97e170
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
For src/vnet/classify, src/vnet/cop, src/vnet/pg, and src/vlib/unix
Type: docs
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Ib6ab734608693a1e9562a44808246950616e8d36
|
|
Type: fix
Change-Id: I8f81cd6c29ff8cb4f0b4850b8b1f6611d89ddb38
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: style
Change-Id: Ifda9597bf4aee89cf1dfd287429a2772fed8f535
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Options like:
expire_walk_interval_ms,max_reassemblies,timeout_ms
can be configured via API, but it's impossible to
check them using vppctl, but this can be a useful
feature
Type: feature
Signed-off-by: Vladimir Ratnikov <vratnikov@netgate.com>
Change-Id: Iac8a96201a7a70b82e9852edc89b819c5d451a58
|
|
L4 checksums for IPv6 should be calculated using a pseudo header that
includes the source/destination addresses, payload length, and payload
protocol.
ip6_tcp_udp_icmp_compute_checksum() was using the payload length and
protocol from the IPv6 header. If there is a hop-by-hop header (or any
other extension header), the payload length used for the pseudo header
should only include the upper layer header and payload and not the
extension header bytes. Same deal with the protocol, the upper layer
next header value should be used instead of the extension header.
Type: fix
Fixes: cb9cadad57
Change-Id: Ifa2c9ad41c0fc4eea674f0671255b637c8e01f71
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: fix
Change-Id: Idbb3f29b13a5c84a8585c4299e51fdfc35f7e1ad
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: feature
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I7e7d95a089dd849c1f01ecea84529d8dbf239f21
|
|
Type: fix
Ticket: VPP-1831
Signed-off-by: John Lo <loj@cisco.com>
Change-Id: I655964b22021ac38cbced577091a1156286d4fd6
|
|
Add features supported by vhost-user
Type: docs
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: Iba4c5244c40324b603e2803ade8ecc0816326de8
|
|
Type: refactor
The Tunnel Endpoint Informatiob Base (TEIB) is a better
description of what it is (a mapping between tunnel endpoint
address, in the overlay, and next-hop address, in the underlay)
whereas NHRP is one instanc eof a control protocol that might add
such endpoints.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Idcb2ad0b6543d3e5d9f6e96f9d14dafb5ce2aa85
|
|
The first translated ICMPv6 packet of a fragmented ICMP message does
not have a IPv6 fragment header. All subsequent have.
With this commit, add a IPv6 fragment header to the first translated
ICMPv6 packet.
Type: fix
Change-Id: Id89409ce7273cbeed801e2e18a09d3e7c3c4e4bc
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
|
|
Type: refactor
Make sure one tls ctx has one event availble
Thus ctx has the same life time with event, which can simplify the
management.
Change-Id: I1f4240e7316025d81bb97644946ffa399c00cd76
Signed-off-by: Yu Ping <ping.yu@intel.com>
|
|
Recent modification added a call to vnet_gso_header_offset_parser in the
beginning of vhost_user_handle_tx_offload. The former routine may set tcp or
udp->checksum to 0. While it is appropriate to set it to 0 for the GSO packet,
it is broken and causes checksum error if the aformentiooned routine is called
by a non-GSO packet. The fix is to not call vhost_user_handle_tx_offload
if the buffer does not indicate checksum offload is needed.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I6e699d7a40b7887ff149cd8f77e8f0fa9374ef19
|
|
Type: fix
coverity found invalid logic.
Change-Id: Ic9144ac805a4e5a18aa299794fedda044dcb65fe
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
fib_walk_sync may call adj_alloc which may cause adj_pool to expand. When
that happens, any previous frame which still use the old adj pointer needs to
refresh. Failure to do so may access or update to the old adj memory
unintentionally and crash mysteriously.
Type: fix
Ticket: VPPSUPP-54
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I173dec4c5ce81c6e26c4fe011b894a7345901b24
|
|
+ Remove fields not present in the typedef.
+ Sort field descriptions by the order in the typedef.
+ Add descriptions to other messages.
+ Add comment lines with de-abbreviated enum values.
Type: style
Change-Id: I2c41e0204ba5c59a53f1cf7b5837118484a16ad0
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
The previous edit has added a new field to a typedef.
That change is backward-compatible for PAPI users,
but not backward compatible for direct binary API users.
This change adds two edits that should have been there already:
+ Copyright year bump.
+ API version bump.
- PAPI users point of view, so bumping minor version only.
Type: fix
Fixes: e5b94dded0dfd7258d5fd0f4ef897d9ccb48715b
Change-Id: Ib85f457254e38a8e5999a078855848e6a5cfda13
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Both are out of sync for long time...
Type: refactor
Change-Id: I7de3170d35330fc172501d87655dfef91998b8fe
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Apply exponential smoothing to the clock rate update calculation in
clib_time_verify_frequency(), with a half-life of 1 minute and a
sampling frequency of 16 seconds. Within 5 minutes or so, the
calculation converges
With each rate recalculation: reset total_cpu_time based on the kernel
timebase delta since vpp started, and the new clock rate
Improve the "show clock [verbose]" debug CLI command.
BFD echo + echo fail tests marked off until the BFD code can be
reworked a bit.
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I24e88a78819b12867736c875067b386ef6115c5c
|
|
host mtu can't be set if tap interface is in namespace.
This patch fixes this issue.
Type: fix
Change-Id: I63811c4b56c708fe708061a8afbaec41994f08ca
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Tap configuration code sets the host mac address
two time. This patch fixes it.
Type: fix
Change-Id: I7bebb9b7f25352a8a9a98bae6a0636757c0cea9c
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
cleaned up some trivial typo's while reading through adj.h
Type: docs
Change-Id: I1b6cd815dc10ed3da8db2024b3e015e076235d50
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: feature
common funcitons across IP-in-IP and GRE tunnels for encap/decap
functions
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I325b66824878d843af167adfe5a7a96b0ab90566
|
|
Type: feature
Change-Id: I7f8e3763d7f8364563a25d0fcc782976b906b325
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Add missing cast to time conversion function to to deal with arbitrary
clocks-per-second values.
Type: fix
Change-Id: I5075a823e7a95c972c513ac765252337d5f59fbf
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: fix
Change-Id: Ib823d016c64998779fb1d00b8aad3acb5e8340be
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Steps to reproduce VPP crash:
1. configure localsid End behavior
2. ping the localsid address
Type: fix
Signed-off-by: Ignas Bacius <ignas@noia.network>
Change-Id: Id780e0875ec9cdb25252217990919fb3dddbf06a
|
|
"classify filter trace ... " and "classify filter pcap ..." are
mutually exclusive.
vnet_pcap_dispatch_trace_configure needs to check for
set->table_indices == NULL.
Type: fix
Ticket: VPP-1827
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I43733364087ffb0a43de92e450955033431d559d
|
|
For ip4 tcp, ip6 tcp, and ip6 udp packet, we set checksum = 0 prior to
computing the checksum. We missed ip4 udp case. This oversight requires all
clients to set udp->checksum = 0 if ip4 udp checksum offload is needed.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: Ic608811e82099f3bec469e123671e9b281f38d76
|
|
Type: feature
plus fixes for gre
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I0eca5f94b8b8ea0fcfb058162cafea4491708db6
|
|
Type: refactor
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I18dcdb7af3e327f6cacdbcb1e52b89f13d6ba6e2
|
|
More RFC compliance.
Ticket: VPP-1816 BFD: peer discriminator not reset on timeout
Type: fix
Change-Id: I68063c18097d282b3527e3fb485c1d0d1fd1b0c8
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: fix
Fixes: 418b225931634f6d113d2971cb9550837d69929d
Change-Id: Ia5f4ea24188c4f3de87e06a7fd07b40bcb47cfc1
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Regardless of whether the virtio_net_hdr is sent as a separate
descriptors or in the same descriptor as the data, we always want to
skip the header length - maybe moving to the next descriptor along the
way.
Type: fix
Change-Id: Iaa70aeb310e589639b20f8c7029aaa8d3ce5d307
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Call session queue node with the right node runtime instead of the
pre-input node runtime.
Type: fix
Change-Id: I43d20bed4930fc877b187ce7ecdce62034b393c5
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: feature
Change-Id: I402549818ba6e078802e914293304174dc6625c2
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: fix
Change-Id: Iff9b1960b122f7d326efc37770b4ae3e81eb3122
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Change-Id: I0e826284c50713d322ee7943d87fd3363cfbdfbc
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
The crash occured trying to retreive a NULL path list to walk the path
extensions. A walk shoul not be required, because there should be no
extensins, since all paths are removed. The problem is that when the
paths were added, they were not sorted, hence neither were the
extensions and when they were updated, duplicate extensions were added,
and hence a path removal did not remove them all.
Fix is to make sure paths are sorted.
Change-Id: I069d937de8e7bc8aae3d92f588db4daff727d863
Signed-off-by: Neale Ranns <nranns@cisco.com>
(cherry picked from commit 257749c40946a9269140d322e374d74c3b6eefb8)
|
|
Type: fix
Change-Id: I6a48a6c14bfb84b3460e8211021bc9df6e915dba
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Currently if user want to set ip4 address to the api, it must convert to ip6
format, e.g. user want to ip4 "90.1.2.1" but must convert to "::5A01:0201",
it is not acceptable, this fix solved the issue.
Ticket: FDIO-753
Type: fix
Change-Id: I2ffa5a3d38400ee176cf601421074f71fc395f03
Signed-off-by: Yulong Pei <yulong.pei@intel.com>
|
|
Return FIB table_id instead of vrf_index to clients
Type: fix
Signed-off-by: Ahmed Abdelsalam <ahabdels@cisco.com>
Change-Id: I76a97bad3ecd3ac8eb045efb1657eaa90c2a57b6
|
|
Fix minor typo in the quad-loop for swif which may actually causes problem
if swif0 != swif1 or swif2 or swif3.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: Ib81f323479c7ecbd28d84956cffbc20b1072d2c2
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I69c245cb0e3f6d599a3270a485fa0a5845cde8eb
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I7f2233eb9bf3d81a697f76ba985083cf1040e2e9
|