Age | Commit message (Collapse) | Author | Files | Lines |
|
Leave tp_vfts vector out for now.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ic20a1671be9424280d0645f48ef2131a694cd16f
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I6dd400285ae475974c416f9b94e8a5b4b6257ca1
|
|
Make sure they only double in size.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I18d5508c7f32836deb3b25943e8e3af39d0dbc33
|
|
Type: feature
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: I0738c0aefb41ab6c0ff717cfccd1df75ddb481fa
|
|
dd2f12ba made use of ip46_address_is_ip4() in order to determine whether
the address is ipv4 or ipv6 within unformat_ip_address - however, its
logic is correct only for some addresses. e.g. a valid IPv6 address of :: (unspecified)
will result in "true" result. This is probably not an issue for most
of the cases (the unspecified address is quite rare),
however if the unformat_ip_address is used as part of the
prefix parsing, the ::/0 is a fairly often utilized construct,
which gets parsed as 0.0.0.0
Solution: return the old logic, but use a temporary
variable to avoid overwriting the target memory on failure.
Type: fix
Fixes: dd2f12ba6ab952d9d66f4d9ba89ffde6309b1ff2.
Change-Id: I272f740dfdf07036cec68516e153f0701a53233d
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
cli show policer's help info is not consistent
with it's arguments.
Type: improvement
Signed-off-by: Huawei LI <lihuawei_zzu@163.com>
Change-Id: I8332fe97ba343e98511db9ff1bb6afd6f3c657cd
|
|
Type: fix
The router flag on a neighbor advertisement can be used by neighbors to
detect that a router has changed to a host (RFC 4861 section 4.4).
If a neighbor adds routes after receiving a router advertisement sent
by VPP and subsequently receives a neighbor advertisement sent by VPP,
it may remove any routes it added based on the RA if the NA does not
have the router flag set. It appears that this is how windows behaves.
When sending a neighbor advertisement, set the router flag if sending
RAs is enabled on the interface.
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
Change-Id: I1f3e42bbd8ea1a4c116b1ce5a8273652d4cd763d
|
|
Otherwise, the newly configured interface will never send RADV's.
See below. In the typical case, suppress = 0 and is_no = 0, which
propagates the current value of radv->send_radv:
radv_info->send_radv =
(suppress != 0) ? ((is_no != 0) ? 1 : 0) : radv_info->send_radv;
No other bit of code will set send_radv, at least in straightforward
ways.
Type:fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: If9368155f7676460ca1f87729c2b3c453405d08d
|
|
vpp crash when update nonexistent classify table.
Program received signal SIGABRT, Aborted.
0x00007fbf3b49b337 in raise () from /lib64/libc.so.6
(gdb) bt
0 0x00007fbf3b49b337 in raise () from /lib64/libc.so.6
1 0x00007fbf3b49ca28 in abort () from /lib64/libc.so.6
2 0x00000000004079db in os_panic () at /usr/src/debug/vpp-23.02/src/vpp/vnet/main.c:417
3 0x00007fbf3bb611c7 in debugger () at /usr/src/debug/vpp-23.02/src/vppinfra/error.c:84
4 0x00007fbf3bb61529 in _clib_error (how_to_die=2, function_name=0x0, line_number=0, fmt=0x7fbf3d03af08 "%s:%d (%s) assertion `%s' fails")
at /usr/src/debug/vpp-23.02/src/vppinfra/error.c:143
5 0x00007fbf3c67062c in vnet_classify_add_del_table (cm=0x7fbf3d438f00 <vnet_classify_main>, mask=0x7fbf00fdc088 "", nbuckets=2, memory_size=2097152,
skip=4, match=1, next_table_index=4294967295, miss_next_index=4294967295, table_index=0x7fbeed930b98, current_data_flag=0 '\000',
current_data_offset=0, is_add=1, del_chain=0) at /usr/src/debug/vpp-23.02/src/vnet/classify/vnet_classify.c:780
6 0x00007fbf3c672bf4 in classify_table_command_fn (vm=0x7fbefb465740, input=0x7fbeed930ef0, cmd=0x7fbefc45ec18)
at /usr/src/debug/vpp-23.02/src/vnet/classify/vnet_classify.c:1622
7 0x00007fbf3d52b527 in vlib_cli_dispatch_sub_commands (vm=0x7fbefb465740, cm=0x4273f0 <vlib_global_main+48>, input=0x7fbeed930ef0,
parent_command_index=1064) at /usr/src/debug/vpp-23.02/src/vlib/cli.c:650
8 0x00007fbf3d52b2c3 in vlib_cli_dispatch_sub_commands (vm=0x7fbefb465740, cm=0x4273f0 <vlib_global_main+48>, input=0x7fbeed930ef0,
parent_command_index=0) at /usr/src/debug/vpp-23.02/src/vlib/cli.c:607
9 0x00007fbf3d52b9cb in vlib_cli_input (vm=0x7fbefb465740, input=0x7fbeed930ef0, function=0x7fbf3d597406 <unix_vlib_cli_output>, function_arg=0)
at /usr/src/debug/vpp-23.02/src/vlib/cli.c:753
10 0x00007fbf3d59cb0c in unix_cli_process_input (cm=0x7fbf3d61fe00 <unix_cli_main>, cli_file_index=0)
at /usr/src/debug/vpp-23.02/src/vlib/unix/cli.c:2616
11 0x00007fbf3d59d25a in unix_cli_process (vm=0x7fbefb465740, rt=0x7fbf00f7bfc0, f=0x0) at /usr/src/debug/vpp-23.02/src/vlib/unix/cli.c:2745
12 0x00007fbf3d555a25 in vlib_process_bootstrap (_a=140458063833296) at /usr/src/debug/vpp-23.02/src/vlib/main.c:1221
13 0x00007fbf3bb74204 in clib_calljmp () at /usr/src/debug/vpp-23.02/src/vppinfra/longjmp.S:123
14 0x00007fbef10028a0 in ?? ()
15 0x00007fbf3d555b4e in vlib_process_startup (vm=0x7fbf3bb7d70f <clib_mem_size+24>, p=0x7fbef10028d0, f=0x7fbf00f06ae0)
at /usr/src/debug/vpp-23.02/src/vlib/main.c:1246
16 0x00007fbf3d592be6 in vec_max_bytes (v=0x8) at /usr/src/debug/vpp-23.02/src/vppinfra/vec_bootstrap.h:161
17 0x00007fbf00f06af8 in ?? ()
18 0x0000000000000004 in ?? ()
19 0x00000000000000ff in ?? ()
20 0x00007fbef1002980 in ?? ()
21 0x00007fbf3d592dcb in _vec_set_len (v=<error reading variable: Cannot access memory at address 0xfffffffffffffff5>,
len=<error reading variable: Cannot access memory at address 0xffffffffffffffed>,
elt_sz=<error reading variable: Cannot access memory at address 0xffffffffffffffe5>) at /usr/src/debug/vpp-23.02/src/vppinfra/vec_bootstrap.h:196
Backtrace stopped: previous frame inner to this frame (corrupt stack?)
(gdb) f 5
0x00007fbf3c67062c in vnet_classify_add_del_table (cm=0x7fbf3d438f00 <vnet_classify_main>, mask=0x7fbf00fdc088 "", nbuckets=2, memory_size=2097152,
skip=4, match=1, next_table_index=4294967295, miss_next_index=4294967295, table_index=0x7fbeed930b98, current_data_flag=0 '\000',
current_data_offset=0, is_add=1, del_chain=0) at /usr/src/debug/vpp-23.02/src/vnet/classify/vnet_classify.c:780
780 t = pool_elt_at_index (cm->tables, *table_index);
(gdb) p *table_index
$1 = 8
(gdb) p cm->tables
$2 = (vnet_classify_table_t *) 0x0
(gdb)
Type: fix
Signed-off-by: Huawei LI <lihuawei_zzu@163.com>
Change-Id: I1c5f6168f0a7e1d1989ce07ec6c30c6fd9f0aaa9
|
|
The tx_fifo of session may not be set up yet, if app request to
disconnect the session, svm_fifo_dequeue_drop_all will crash.
In debug image, ho_session_alloc will do clib_bitmap_validate to
prevent race condition, however the input is not correct which
will make vpp crash.
Type: fix
Change-Id: Ia8bff325d238eacb671e6764ea2a4eecd3fca609
Signed-off-by: Dongya Zhang <fortitude.zhang@gmail.com>
|
|
Type: feature
Signed-off-by: Julian Klaiber <julian@klaiber.me>
Change-Id: I866a2d2e06013380309c98a54078c1b3f6ad76fc
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ia2c771cbf826526d2d06b6da022509ab02917350
|
|
To aid sesipon debug, add session event log in SM debug to track
the session state.
Type: improvement
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I6909cf969cd5b6a3ea5a06d08ae32c2f1d48f686
|
|
Type: fix
virtio transmit node uses header offsets to set the
appropriate metadata for packet with offloads. But
l2_hdr_offset is not correctly set by previous node(s).
This patch makes use of curren_data field as l2_hdr_offset.
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: Id2f41a7650be45c9cc1ebacc7bec298be79bf218
|
|
Type: fix
af_packet transmit node uses header offsets to set the
appropriate metadata for packet with offload. But
l2_hdr_offset is not correctly set by previous node.
This patch makes use of curren_data field as l2_hdr_offset.
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I751a725af5c231a443eed22231a867eb7f3894e0
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I9c4050f96c310f1e6eb2cae8d908c44968526c3c
|
|
Avoid deleting connections in session layer io event handler.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I87b3e53f9039161688467d9716875583ad797c07
|
|
Pass vec_foreach args in the right order
Type: fix
Signed-off-by: Dmitry Valter <d-valter@yandex-team.ru>
Change-Id: I90d3dfb70ee2dbd9a48ae9ecfd2c1526a74d0786
|
|
vxlan will be moved to a plugin. Remove vnet files from including
vxlan header include files.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I4268110b4ed54f7ae3ffecd6db0e3025122fa59c
|
|
Type: feature
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I2ccaf1d512dcb72e414be8c69cbb538ebbe0e933
|
|
Type: feature
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I84843eb3a0a66c64cd46536624633e0dae1c4681
|
|
- add session debug cli to enable fine control of which event logs
are enable/disable with below syntax
session debug {show | group <list> level <n>}
list may be entered with a dash, "0-4"
or it may be entered with a comma, "0,1,4"
- fix compilation errors when SESSION_EVT is enable
- change SESSION_EVT_FREE_HANDLER to use DEC_SESSION_ED instead of
DEC_SESSION_ETD because the transport may already be free when the
handler is called
Type: improvement
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: Iab2989e0a847bb59002ef16494eebcc1d112b2ae
|
|
Type: fix
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I7003162ee72c39c44be1e7ff0d27f4416b3eca5a
|
|
This allows for custom next node selection on output.
Type: feature
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ib0fee71a01847184e95c18097bbbfdadfbd9d030
|
|
Change-Id: I34ce2cc4585bfbd679d7d66d5bef69ddb268bb57
Type: improvement
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
|
|
Type: fix
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: Ibb4b17b954c55bcb37ede57d398966f244735c3d
|
|
Type: fix
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I7fc645c46d285ceb13903f5835c99e9b6a9e5b07
|
|
Type: fix
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I3a059b9dcbbcb597a7822f4f35fb275a7c197647
|
|
Type: fix
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I5eb83cbd0f8534dc50ecb907b3582717e8709aa2
|
|
Delete redundant help information in ip neighbor's
cli. There is no code implementation about fib-id and
proxy in the cli's subsequent process.
Type: fix
Signed-off-by: Huawei LI <lihuawei_zzu@163.com>
Change-Id: I1e276aad030409e3f2f62fee489ea95d316e67b5
|
|
Coverity complains dead codes in 2 places due to a recent commit as
pointed out in Fixes. The dead codes are
if (seed < L2_BD_ID_MAX % 2)
is_seed_low = 1;
and
if (is_seed_low)
seed += (2 * (i % 2) - 1) * i;
seed can never be less than (L2_BD_ID_MAX % 2).
Consequently, is_seed_low is always 0.
There is also other problem. The inner loop is iterating only once.
The fix is to greatly simplify the code to generate a random bd_id.
Type: fix
Fixes: Ieb6919f958f437fc603d5e1f48cab01de780951d
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I318773b9a59950920e051548ef14e36054ebd5e6
|
|
Session debug code does not compile anymore due to vlib_mains global
variable disappearing over time. Replace it with vlib_get_main_by_index
call.
Add a cmake variable and pass it from make command line to enable
session debug. Notice transport debug is required for session debug.
make rebuild VPP_EXTRA_CMAKE_ARGS=-DVPP_TCP_DEBUG_ALWAYS=ON VPP_EXTRA_CMAKE_ARGS+=-DVPP_SESSION_DEBUG=ON
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: Ic2e887c6b10b77cbabd56934f4931fcfa04a6751
|
|
Type: improvement
Change-Id: Ibf683c9ba8a2751e0b40920f6735cfe0a35a6e6d
Signed-off-by: Damjan Marion <dmarion@me.com>
|
|
Type: improvement
Change-Id: I4a75583ce718ba6466cd09ca8373fd43988ef62a
Signed-off-by: Damjan Marion <dmarion@me.com>
|
|
Type: improvement
Change-Id: I3fbbda0378b72843ecd39a7e8592dedc9757793a
Signed-off-by: Damjan Marion <dmarion@me.com>
|
|
https://jira.fd.io/browse/VPP-2034
Type: fix
Signed-off-by: Laszlo Kiraly <laszlo.kiraly@est.tech>
Change-Id: Ieb6919f958f437fc603d5e1f48cab01de780951d
|
|
Fix vpp crash when create vxlan/vxlan-gpe/geneve/gtpu tunnel
with 0.0.0.0 dst ip in debug build. The ASSERT should be move
out of fib_prefix_from_ip46_addr, which may be called when
create vxlan/vxlan-gpe/geneve/gtpu tunnel with 0.0.0.0 dst ip.
How to reproduce:
1. build debug vpp and run vpp
2. create vxlan t src 192.168.0.2 dst 0.0.0.0 vni 1 instance 1
create vxlan-gpe tunnel local 192.168.0.2 remote 0.0.0.0 vni 1
create geneve tunnel local 192.168.0.2 remote 0.0.0.0 vni 1
create gtpu tunnel src 192.168.0.2 dst 0.0.0.0 teid 1
Type: fix
Change-Id: I19972f6af588f4ff7fd17de1b16b9301e43d596f
Signed-off-by: Huawei LI <lihuawei_zzu@163.com>
|
|
Some files include tcp_debug.h without including <vpp/vnet/config.h>
As a result, those files do not get VPP_TCP_DEBUG_ALWAYS option
set. The fix is to include <vpp/vnet/config.h> in tcp_debug.h
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I0c141147f1e8d1b49c5a1440fac1e97cbd96aaa7
|
|
Add cmake option to enable TCP_DEBUG_ALWAYS.
make rebuild VPP_EXTRA_CMAKE_ARGS=-DVPP_TCP_DEBUG_ALWAYS=ON
make rebuild VPP_EXTRA_CMAKE_ARGS=-DVPP_TCP_DEBUG_ALWAYS=OFF
Type: improvement
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I911a8d615f76516ae0a988bc6135c3b0d8fcb3df
|
|
Type: improvement
Change-Id: Ie035bebf64226691cffc84484e4bf7310287d1b7
Signed-off-by: Damjan Marion <dmarion@me.com>
|
|
Type: fix
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I9d5004f8764b1833e5ca825bc52345e23770c6bc
|
|
Type: fix
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I07b694323e0f6745dec2b846785026b152d78af6
|
|
adj_delegate_adj_created() is incorrectly called when an existing
adj is found and returned. This can lead to crashes in some cases
in the pmtu delegate:
(gdb) bt
0 0x00007f2aa8fc9ce1 in raise () from /lib/x86_64-linux-gnu/libc.so.6
1 0x00007f2aa8fb3537 in abort () from /lib/x86_64-linux-gnu/libc.so.6
2 0x0000564361b5403a in os_exit (code=code@entry=1) at ./src/vpp/vnet/main.c:437
3 0x00007f2aa9271a3e in unix_signal_handler (signum=11, si=<optimized out>, uc=<optimized out>) at ./src/vlib/unix/main.c:188
4 <signal handler called>
5 0x00007f2aa9970d5a in fib_table_get_table_id_for_sw_if_index (proto=FIB_PROTOCOL_IP4, sw_if_index=<optimized out>) at ./src/vnet/fib/fib_table.c:1156
6 0x00007f2aa964aebf in ip_pmtu_adj_delegate_adj_created (ai=8) at ./src/vnet/ip/ip_path_mtu.c:197
7 0x00007f2aa9993ee5 in adj_delegate_adj_created (ai=ai@entry=8) at ./src/vnet/adj/adj_delegate.c:166
8 0x00007f2aa998dbde in adj_mcast_add_or_lock (proto=proto@entry=FIB_PROTOCOL_IP6, link_type=link_type@entry=VNET_LINK_IP6, sw_if_index=sw_if_index@entry=7) at ./src/vnet/adj/adj_mcast.c:95
9 0x00007f2aa95c7b3e in ip6_link_enable (sw_if_index=7, link_local_addr=link_local_addr@entry=0x0) at ./src/vnet/ip/ip6_link.c:217
10 0x00007f2aa9621587 in vl_api_sw_interface_ip_enable_disable_t_handler (mp=0x7f2a4fa5ad10) at ./src/vnet/ip/ip_api.c:108
11 0x00007f2aaa3b7e44 in msg_handler_internal (free_it=0, do_it=1, trace_it=<optimized out>, msg_len=<optimized out>, the_msg=0x7f2a4fa5ad10, am=0x7f2aaa3cc020 <api_global_main>) at ./src/vlibapi/api_shared.c:593
12 vl_msg_api_handler_no_free (the_msg=0x7f2a4fa5ad10, msg_len=<optimized out>) at ./src/vlibapi/api_shared.c:810
13 0x00007f2aaa3a1702 in vl_socket_process_api_msg (rp=<optimized out>, input_v=<optimized out>) at ./src/vlibmemory/socket_api.c:208
14 0x00007f2aaa3a95d8 in vl_api_clnt_process (vm=<optimized out>, node=<optimized out>, f=<optimized out>) at ./src/vlibmemory/memclnt_api.c:429
15 0x00007f2aa9226f37 in vlib_process_bootstrap (_a=<optimized out>) at ./src/vlib/main.c:1235
16 0x00007f2aa91824a8 in clib_calljmp () at /builds/graphiant/graphnos/vpp/debian/output/source_dir/src/vppinfra/longjmp.S:123
17 0x00007f2a47cf5d60 in ?? ()
18 0x00007f2aa922853f in vlib_process_startup (f=0x0, p=0x7f2a494dc000, vm=0x7f2a489ed680) at ./src/vlib/main.c:1260
19 dispatch_process (vm=0x7f2a489ed680, p=0x7f2a494dc000, last_time_stamp=<optimized out>, f=0x0) at ./src/vlib/main.c:1316
20 0x0000000000000000 in ?? ()
(gdb)
Type: fix
Change-Id: I2d3c041e0be8284471771c7882c89f743baab0e5
Signed-off-by: Peter Morrow <pdmorrow@gmail.com>
|
|
Change-Id: Id8d6ab96a710cdd207068cf19a6363bbcd584de4
Type: improvement
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
|
|
Change-Id: Ia5ec7fc0c71e6a0ad1b43df24bb6b88e616d260d
Type: improvement
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
|
|
It looks like tcp_time_now has been deprecated for a while and the
replacement is tcp_time_now_us
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: Ifaed2632baa49d489d4e03f2623d8cc9a6f36e64
|
|
Type: improvement
Signed-off-by: ChinmayaAgarwal <chinmaya.agarwal@hsc.com>
Change-Id: I27d5981a77d4166a92db9ecf73d9b0eed962ec19
|
|
Need to fill frp_addr for local path, it's used by dpo-receive.
If not, address output can be invalid:
$ sudo vppctl sh ip6-ll fe80::dcad:ff:fe00:3/128
IP6-link-local:loop3, fib_index:2, locks:[IPv6-nd:1, ]
fe80::dcad:ff:fe00:3/128 fib:2 index:55 locks:2
IPv6-nd refs:1 entry-flags:connected,import,local, src-flags:added,contributing,active,
path-list:[72] locks:2 flags:shared,local, uPRF-list:58 len:0 itfs:[]
path:[82] pl-index:72 ip6 weight=1 pref=0 receive: oper-flags:resolved, cfg-flags:local,glean,
[@0]: dpo-receive: 8000:100:fe80::dcad:ff on loop3
forwarding: unicast-ip6-chain
[@0]: dpo-load-balance: [proto:ip6 index:57 buckets:1 uRPF:58 to:[0:0]]
[0] [@2]: dpo-receive: 8000:100:fe80::dcad:ff on loop3
Type: fix
Change-Id: Ib9874c5eac74af789e721098d512a1058cb8e404
Signed-off-by: Vladislav Grishenko <themiron@yandex-team.ru>
|
|
Encode entropy value in UDP source port when requested per RFC 7510.
CLI already has "src-port-is-entropy", use zero UDP source port in API
to avoid breaking changes, since zero port is not something to be used
in wild.
Also, mark UDP encapsualtion API as mp-safe as already done for CLI.
Type: feature
Change-Id: Ieb61ee11e058179ed566ff1f251a3391eb169d52
Signed-off-by: Vladislav Grishenko <themiron@yandex-team.ru>
|
|
Type: fix
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I2901628d23f9b81edb32d0ced3877e5799a6cec7
|