Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: style
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Idfcd4a363d4582ce69fac83ddc760f2dc4feed52
|
|
Type: fix
Change-Id: I05d74da311d6a86ec4eb3df50d53ecaa9c622f50
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Make sure existing connection is in time-wait
Change-Id: I8e8bef151f81bcd589b4da0d4bf63cc59f9f451b
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Improve host stack CPS test, and it help improve 10x performance
Type: feature
Change-Id: I6af61e0bad7c16ee2d30a1422cc46bb89f1cedb4
Signed-off-by: Yu Ping <ping.yu@intel.com>
Signed-off-by: Yuwei Zhang <yuwei1.zhang@intel.com>
|
|
The pcap trace filter initial table index lives in
cm->filter_set_by_sw_if_index [0], which corresponds to the "local0"
interface. Debug cli makes sure that folks don't accidentally specify
the "local0" interface. At least it does now...
Fix the "vlib format.c code coverage" test in test/test_vlib.py.
Type: fix
Change-Id: I35320bc2c8f0c6f1f8c12e3529d1938548185151
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Type: fix
Fixes: cbe25aab3b
ip_neighbor_advertise() was calling one of both of
ip4_neighbor_advertise() and/or ip6_neighbor_advertise() with
&addr->{ip4|ip6} as an argument. If addr is null, which is likely
a requirement when the type is IP46_TYPE_BOTH, this results in a
SEGV.
Check addr and pass a pointer to one of it's members if it is not
null, otherwise pass null.
Change-Id: I6261bb8fe947365fe3d6c58788ea27d5cb28ff05
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: fix
Change-Id: I5cb9a3845ddbc5f4de4eb4e9c481f606fe5cec9a
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Change-Id: Iead1303ca3dec7593eb3ce54f291b82d94c821a4
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
The 16 bits reference counter limited the number of interfaces
per FIB table to 65K from a given source. Some use cases, for example
GTP-U tunnels require much more interfaces than that.
This change increases the size of the reference counter to 32 bits.
Type: fix
Signed-off-by: Miklos Tirpak <miklos.tirpak@gmail.com>
Change-Id: I944a98513018840f904f2808c2a1e963b37886cc
|
|
Type: fix
Fixes: cbe25aab3b
Wrap ip_neighbor_api_init() in VLIB_API_INIT_FUNCTION() macro
instead of VLIB_INIT_FUNCTION() so API message IDs get allocated.
Change-Id: Id0c36c16b982feb9d7442015f9ddf2449a9e5b60
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: refactor
Change-Id: I32234173ebd69f80acb1afa4039fffbd19157f6d
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: fix
Several tunnels encapsulation use udp as outer header and udp src port
is set by inner header flow hash, such as gtpu, geneve, vxlan, vxlan-gbd
Since flow hash of inner header is already been calculated, keeping it
to vnet_buffere[b]->ip.flow_hash should save load-balance node work to
select ECMP uplinks.
Change-Id: I0e4e2b27178f4fcc5785e221d6d1f3e8747d0d59
Signed-off-by: Shawn Ji <xiaji@tethrnet.com>
|
|
Someone much more knowledgeable than I wrote:
For L3 IP forwarding, any VLAN tags on a packet must be exact
match to a sub-interface which means both outer and inner VLAN
tag IDs must be exact-matched to specific values defined of that
sub-interface. Without exact match on a L3 sub-interface, VPP
has no mechanism to know what VLAN tags to use for packet output,
such as ARP request packets or IP packets, on that sub-interface.
Thus, sub-interface with "inner-dot1q any" is not an exact match
sub-interface by definition since no match is present on inner
tag.
While in the area, fix a memory leak that would ensue on poorly
configured interfaces.
Change-Id: I8d17a96dbca3e3724c297ecc935ca61764e6ce2e
Type: fix
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
Type: fix
Change-Id: I170edd62220a63cb19efea3032e173fb87730b1b
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
in transport mode the header sequence is:
MAC - IP (tun) - ESP - GRE - L2
so popping the GRE header is done in the ESP decrypt node.
Change-Id: Ia125eb65b9300368617d2bffca09683851e43be0
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Fix pg code to close it's open file descriptors before zero'ing the
pcap_main structure for re-use.
Ticket: VPP-1780
Type: fix
Signed-off-by: Christian E. Hopps <chopps@chopps.org>
Change-Id: I32945c6476ae83b8d210ee67ac78db3e8f786f46
|
|
Type: fix
Change-Id: Id53eb6ed15f270d747b9831a7b585cbafe515dd2
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Make the help string consistent with the cli parser.
Type: fix
Change-Id: I7140bd589c2a94dbf5af5cc633cb495457a6af22
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
DBGvpp# set interface feature local0 arp-foo arc bad-arc
set interface feature: Unknown arc name (bad-arc)...
DBGvpp# set interface feature local0 arp-foo arc arp
set interface feature: Feature (arp-foo) not registered to arc (arp)...
See 'show features verbose' for valid feature/arc combinations.
DBGvpp# set interface feature local0 arp-disabled arc arp
Type: fix
Change-Id: I036bb2a75dd2d40f6901e4fde3eb14925238e19b
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: fix
Change-Id: Idf694477c18852e5541c28a493a56b302122e46c
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Without understanding what is going on,
a pattern from l2_fwd.c is applied to l2_patch.c file.
Type: fix
Fixes: d770cfc96257f9bd9e0c96c8ebe50e4531dc1bc5
Ticket: VPP-1799
Change-Id: Ia97d448f9d1846549f57ea69044ae15fa39bb942
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
For active-backup mode, we transmit on one and only one interface. However,
we might still receive traffic on the backup interface. We should drop them
and strictly process incoming traffic on only the active interface.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: Idb6b798b30033e84044b151c616be3c157329731
|
|
Type: feature
This patch adds the ethernet type flow support
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I6de163d04c6472df60a5f296fb428efd000267c4
|
|
Forbid too long match to be configured.
Type: fix
Change-Id: Icfced0f86821d5febd6a3c81e1315bd9737498c0
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
the sequence number increment and the anti-replay window
checks must be atomic. Given the vector nature of VPP we
can't simply use atomic increments for sequence numbers,
since a vector on thread 1 with lower sequence numbers could
be 'overtaken' by packets on thread 2 with higher sequence
numbers.
The anti-replay logic requires a critical section, not just
atomics, and we don't want that.
So when the SA see the first packet it is bound to that worker
all subsequent packets, that arrive on a different worker,
are subject to a handoff.
Type: feature
Change-Id: Ia20a8645fb50622ea6235ab015a537f033d531a4
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: test
Change-Id: I7d0496c37e06d3b6eee325a262e5398860282b63
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Change-Id: I59549b3aab5a0ccfe7db02757f78528e028121a5
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Change-Id: Ibbe7e20aebc9153ceba07e048dc0eaa45193f4ea
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: feature
Make quic use the crypto contexts. This introduces a crypto context
pool backed by a hashtable giving ctx indexes by connect params
(ckpair, engine, rx & tx fifo sizes).
Applications keep the initialization vector common.
Change-Id: I22ed6711196cd70a2f2f74240f12113c7af8dfcd
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: fix
Change-Id: I01602ba7f1a4820c7790a771a5a7281ed66ff905
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: feature
- ip-neighbour: generic neighbour handling; APIs, DBs, event handling,
aging
- arp: ARP protocol implementation
- ip6-nd; IPv6 neighbor discovery implementation; separate ND,
MLD, RA
- ip6-link; manage link-local addresses
- l2-arp-term; events separated from IP neighbours, since they are not
the same.
vnet retains just enough education to perform ND/ARP packet
construction.
arp and ip6-nd to be moved to plugins soon.
Change-Id: I88dedd0006b299344f4c7024a0aa5baa6b9a8bbe
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Iaae7a9e120bbf8168c581b06d3ac0e124b32e0e7
|
|
Type: fix
Change-Id: Id3a1950e49d5eb1883af06a14df97e98f55162a8
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: feature
Change-Id: I28f7a658be3f3beec9ea32635b60d1d3a10d9b06
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: feature
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I3feddfe44dee528b9ca05aa0150e9423306ae49d
|
|
We already had /if/lacp/<bond-sw_if_index>/<slave-sw_if_index>/state in
the stats segment. Add also the partner-state to be complete.
Change to populate stats segment with the states at startup, after processing
an lacp pdu, and after timer expiration.
Unit test
---------
sudo vpp_get_stats dump | grep /if/lacp
63.00 /if/lacp/3/1/state
61.00 /if/lacp/3/1/partner-state
63.00 /if/lacp/3/2/state
61.00 /if/lacp/3/2/partner-state
Type: feature
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: Ib7b8e1183d572bb6e422a846aaa2b7b3559a0dc7
|
|
Type: fix
Change-Id: I9498b660bf2045bb6aac96d19bb9456a14b35847
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: fix
Change-Id: Ib00ab9b2f28c0f4d85e96bf95697f61b8e415f37
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: feature
Change-Id: I7d3017bbb369261d74f51807a226f2c12f45291c
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: refactor
Change-Id: I9be652e56cdb48b0aee3253f7ce8d9bed299d824
Signed-off-by: Florin Coras <fcoras@cisco.com>
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Type: refactor
Change-Id: I0eb46676fc22ce6825b2d879498df344b5a855e8
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: feature
This add a `show app message queue` cli command
that shows mq size per app & thread.
Change-Id: I5c6ce024b149fb7a47d899bc514c5a4887429982
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: feature
Change-Id: I3a642626a444504594c5e3df40dbc92df54136f0
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Use consistent API types.
Type: fix
Change-Id: I2dec594cb834a45004edc9ca58ad7c7b4bd7ff06
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Use consistent API types.
Type: fix
Change-Id: I11cc7f6347b7a60e5fd41e54f0c7994e2d81199f
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Type: fix
Change-Id: Idf4d0b59a1eb2c739a67a4786470884050f81561
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I1fd190da28a765ba430952539c291a741aaa3dce
|
|
Type: feature
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I2272521d6e69edcd385ef684af6dd4eea5eaa953
|
|
This helps GCC understand the memcpy will not overflow pad_data. GCC-6
(default on Debian 9) in particular got confused.
Type: fix
Change-Id: I176eb01531b9d5c7ebec40f015e510b2d56e77c4
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Delete Null-checking "p0" in function ip6_tcp_udp_icmp_bad_length,
because it's not necessary.
Type: fix
Signed-off-by: johny <jan.cavojsky@pantheon.tech>
Change-Id: I2bf43a60c1c1d76e42581df27f2285c9e9563093
|