Age | Commit message (Collapse) | Author | Files | Lines |
|
- Generate client DUID only when DHCPv6 PD feature is enabled
- Change client DUID type from DUID-LLT to DUID-LL
- Fix coverity warnings
Change-Id: I20e518fc9a1c5f3f7ea9add7e7e03a487c99e978
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Change-Id: I26194e00dfb85e5cd1c65ff4e6ffd665be2d719b
Signed-off-by: Ping Yu <ping.yu@intel.com>
|
|
Change-Id: I12fbebd1d24c37dc77c147773ea522c8a4b7b99d
Signed-off-by: John Lo <loj@cisco.com>
|
|
Change-Id: Ic98945fa1ffcc73e0b239ff5cc11d45e7318613e
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Change-Id: Ibae260273f25a319153be37470aed49ff73e957a
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
ip4 vxlan cli/api (using flow infra) to create flows and enable them on
different hardware (currently tested with i40e)
to offload a vxlan tunnel onto hw:
set flow-offload vxlan hw TwentyFiveGigabitEthernet3/0/0 rx vxlan_tunnel1
to remove offload:
set flow-offload vxlan hw TwentyFiveGigabitEthernet3/0/0 rx vxlan_tunnel1 del
TODO:ipv6 handling
Change-Id: I70e61f792ef8e3f007d03d7df70e97ea4725b101
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Change-Id: I35508d5251633396393f52842d1b58bc1c1463f6
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
- Cleanup session state after last ack and avoid using a cleanup timer.
- Change session cleanup to free the session as opposed to waiting for
delete notify.
- When in close-wait, postpone sending the fin on close until all
outstanding data has been sent.
- Don't flush rx fifo unless in closed state
Change-Id: Ic2a4f0d5568b65c83f4b55b6c469a7b24b947f39
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Since the main thread is not used for session polling anymore, when vpp
is started with multiple wokers, allocate connections on the first. Also
add a simple udp make test.
Change-Id: Id869f5d89e0fced51048f0384fa86a5022258b7c
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
This patch separates setting of hardware interfaec and software
interface MTU. Software MTU is L2 payload MTU (i.e. not including L2
header). Per-protocol MTU for IPv4, IPv6 and MPLS can also be set.
Currently only IP4, IP6 are enabled in adjacency / rewrite code.
Documentation in src/vnet/MTU.md
Change-Id: Iee2fd6f0bbc8210748dd8e073ab9fab87d323690
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: I3f36e5760fd2935cc29d22601d4c0a1d2a22ba84
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ib8e332174d96bf9cfa4bbaaa5b8d8bc9958424b1
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Iaeb52d94cb6da63ee93af7c1cf2dade6046cba1d
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I72a1ccdfdd5573335ef78fc01d5268934c73bd31
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Change-Id: I7add46258fe44bc4d23d805ffc7eae75e37cab82
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
also export per-node error counters
directory entries implement object types
Change-Id: I8ce8e0a754e1be9de895c44ed9be6533b4ecef0f
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
only learn from a GARP packet if it is an update to an existing entry.
Change-Id: I4c1b59cfedb911466e5e4c9756cf53a6676e1909
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: Ib756c4f3e8caba1f77ef48b62a2a5d7283fe5016
Signed-off-by: Vijayabhaskar Katamreddy <vkatamre@cisco.com>
|
|
Change-Id: I77264c4398e6fad461bb4dc10867a1f9c3accec0
Signed-off-by: John Lo <loj@cisco.com>
|
|
This reverts commit d018870d1b02109fc8b328446f15312fdd2fcd11.
Change-Id: I700ade7a25ae5ed72cfed586e50b02492a4f11de
Signed-off-by: John Lo <loj@cisco.com>
|
|
- use types on the DHCP API so that the same data is sent in comfing messages and in dumps
- add the DHCP client dump API
- update VOM to refelct API changes
- rename VOM class dhcp_config* dhcp_client*
- the VOM dhcp_client class maintains the lease data (which it reads on a dump) for clients to read
Change-Id: I2a43463937cbd80c01d45798e74b21288d8b8ead
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: I86019f4ff9b0c8c633638fa23341d8ce49099ba6
Signed-off-by: John Lo <loj@cisco.com>
|
|
- Modify the API send_ip6_na and send_ip4_garp to take sw_if_index instead
of vnet_hw_interface_t and add call to build_ethernet_rewrite to support
subinterface/vlan
- Add code to bonding driver to send an event to bond_process when the first
interface becomes active or when the active interface is down
- Create a bond_process to walk the interface and the corresponding
subinterfaces to send garp/ip6_na when an event is received.
- Minor cleanup in bonding/node.c
Note: dpdk bonding driver does not send garp/ip6_na for subinterfaces. There is
no attempt to fix it here. But the infra is now done and should be easy to
add the support.
Change-Id: If3ecc4cd0fb3051330f7fa11ca0dab3e18557ce1
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: I9e759037295fe675abe426e565a562b1ec1e7d33
Signed-off-by: Jerome Tollet <jtollet@cisco.com>
|
|
DBGvpp# sh bier disp entry
DBGvpp# sh bier disp entry 0
No such BIER disp entry: 0
DBGvpp# sh bier disp table
DBGvpp# sh bier disp table 0
No such BIER disp table: 0
DBGvpp# sh bier disp table 11
No such BIER disp table: 11
DBGvpp#
DBGvpp# sh bier bift
no BIFT entries
DBGvpp# sh bier bift set 0
no BIFT entries
DBGvpp# sh bier bift set 0 sd 0 bsl 0
no BIFT entries
DBGvpp#
DBGvpp# sh bier fib
No BIER tables
DBGvpp# sh bier fib 0
DBGvpp# sh bier fib 0 4
DBGvpp# sh bier fmask
DBGvpp# sh bier fmask 2
No BIER f-mask 2
DBGvpp# sh bier imp
DBGvpp# sh bier imp 0
No such BIER imposition: 0
Change-Id: Ibadac3441dd8a6d1b96bd9ee4358e28498875b95
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
"sh run" says the number of clocks for my tcp based throughput test
dropped from ~43 to ~23
Change-Id: I719439ba7fc079ad36be1432c5d7cf74e3b70d73
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ia8ef019742c13b1149916d51796cad6f50687162
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ide1f76e9207b6022d5258a119f8d59cca85651b5
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Avoids recomputing the fib index in ip local for locally delivered
packets and should incur no extra cost when forwarding packets.
Change-Id: Id826ffa8206392087327f154337eabc8a801b4d7
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Id97de732b5952d5d86202e7749c9e81cf8dbed87
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
If the caller is the session owning thread or the main thread with a
worker barrier sync (cli/api) add an event to the pending disconnects
vector in the session node and entirely avoid using the event queue.
Useful for bursts of disconnects (like an app detach).
If disconnects come from a processes, be willing to retry enqueueing the
disconnect to the event queue multiple times.
Change-Id: Ieece1f1091b713f94c41c703b6e805bc8498816a
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Improve deletion of L2FIB MAC entry using l2fib_add_del API. If
sw_if_index param specified in th API is non-zero, check that its
value match that of the MAC entry to proceed with deletion.
Improve "show l2fib" CLI to allow display of all entries, learned
entries only, or added ovia CLI/API entries only. For added entry,
show "no" under the age column to indicate entry does not age.
Change-Id: I0bd2582c2b6bac268e551e4f8ca6dab2be4400ad
Signed-off-by: John Lo <loj@cisco.com>
|
|
Change-Id: I5e29e16b4d45411b1a7c177b8d7156c5baefe6a1
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
This api only supports default tables but v6 and v4 default tables are
different.
Change-Id: I7fe39251af99082278e84d7411511bdeca34e609
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: If37d644a26132c42a04927f612eec5e891066451
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I00fc4a4553dabed7ef099227b8253ed4916ea5e4
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ibab5e27277f618ceb2d543b9d6a1a5f191e7d1db
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I8d8ecc80edb7665125ba625a3ce7b30d2dea88f0
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Cause: EVP_MD_CTX object used but not initialized.
Change-Id: I390b2acf580f16415685563fa52e56717efc7be7
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
|
|
Change-Id: I4cc6a20b69cce2aa52768a27c5d455eb098224c8
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I84327197d59c72d0d046dd2cb4071bf74af6fc28
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Move handling of IP neighbor pool full into main thread on entry
creation and make sure static entriesare not deleted for reuse.
Fix IPv6 neighbor handling on interface down and up so that static
entries are not deleted.
Change-Id: I073794949a41a5b86201e519ebe479febfc506c8
Signed-off-by: John Lo <loj@cisco.com>
|
|
Change-Id: I1773d962b373693a737d39c0c97e8c53eb91545a
Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
|
|
Gain is around 6 clocks per packet (22 to 16).
Change-Id: Ia6f4293ea9062368a9a6b235c650591dbc0707d0
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Old code ~25 clocks/packet, new ~10.
Change-Id: I202cd6cbafb1ab2296939634d674f7ffd28253fc
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
the ip4-dhcp-client-detect feature MUST run prior to nat44-out2in, or
inbound dhcp broadcast packets will be dropped. Certain dhcp servers
answer lease renewal dhcp-request packets with broadcast dhcp-acks, leading
to unrecoverable lease loss.
In detail, this constraint:
VNET_FEATURE_INIT (ip4_snat_out2in, static) = {
.arc_name = "ip4-unicast",
.node_name = "nat44-out2in",
.runs_after = VNET_FEATURES ("acl-plugin-in-ip4-fa"),
};
doesn't get the job done:
ip4-unicast:
[17] nat44-out2in
[23] ip4-dhcp-client-detect
[26] ip4-not-enabled
Add a proper constraint:
VNET_FEATURE_INIT (ip4_snat_out2in, static) = {
.arc_name = "ip4-unicast",
.node_name = "nat44-out2in",
.runs_after = VNET_FEATURES ("acl-plugin-in-ip4-fa",
"ip4-dhcp-client-detect"),
};
and the interface feature order is OK, at least in this regard:
ip4-unicast:
[17] ip4-dhcp-client-detect
[18] nat44-out2in
[26] ip4-not-enabled
We need to carefully audit (especially) the ip4-unicast feature arc,
which has [gasp] 37 features on it!
Change-Id: I5e749ead7ab2a25d80839a331de6261e112977ad
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: Ic1fab1f3aba92bbdbfd281459562d1f9697ab465
Signed-off-by: John Lo <loj@cisco.com>
|
|
- fix newreno cwnd computation
- reset snd_una_max on entering recovery
- accept acks beyond snd_nxt but less than snd_congestion when in
recovery
- avoid entering fast recovery multiple times when using sacks
- avoid as much as possible sending small segments when doing fast
retransmit
- more event logging
Change-Id: I19dd151d7704e39d4eae06de3a26f5e124875366
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Should cost at most 1 clock per frame when not enabled.
Add "pcap rx trace..." debug CLI, refactored "pcap tx trace" debug CLI
to avoid duplicating code.
Change-Id: I19ac75d1cf94a6a24c98facbf0753381d37963ea
Signed-off-by: Dave Barach <dbarach@cisco.com>
|
|
Replace clib_warning with vlib_log_warn
Change-Id: I6d0b8d97048b75f4418609264af0c14e19fad79b
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|