summaryrefslogtreecommitdiffstats
path: root/src/vnet
AgeCommit message (Collapse)AuthorFilesLines
2021-08-30tcp: Allow accepting session to send custom packetliuyacan1-1/+9
Tcp may want to send acks in established, but the app has not called accept() yet. Type: improvement Signed-off-by: liuyacan <liuyacan@corp.netease.com> Change-Id: I43b8cd386e533ca95c8ec260a0a1f695ea140358
2021-08-26vhost: migrate to new TX infraSteven Luong3-88/+67
Take advantage of the new TX infra and support manual thread placement Type: improvement Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: Id8023846a2eb59125fcf2f80f4f11eb681cf14dc
2021-08-26sr: extend the srv6 sid list structureAhmed Abdelsalam2-42/+51
Extend the srv6 sid list structure with policy type to support different SR policy types Type: feature Signed-off-by: Ahmed Abdelsalam <ahabdels@cisco.com> Change-Id: I6a8cf82b1269e1c46f3757df0047b306f613112b
2021-08-25fib: fix source address get error for p2p ifjxm1-0/+24
Type: fix Signed-off-by: jxm <jiangxiaoming@outlook.com> Change-Id: I5a6a1ce9f232d4ed0fd4707cd5aa9b46cc8a2a5a
2021-08-20ip: check if interface has link-local addressStanislav Zaikin1-1/+6
Type: fix Change-Id: I9d3344374738f8cf883cffb4715c76b50bb4bfce Signed-off-by: Stanislav Zaikin <zstaseg@gmail.com>
2021-08-20vlib: add format_vnet_buffer_no_chainBenoît Ganne6-14/+31
- add format_vnet_buffer and format_vnet_buffer_no_chain to mirror format_vlib_buffer and format_vlib_buffer_no_chain - format_vnet_buffer used to be the "no chain" version, replace all of its current use with the corresponding format_vnet_buffer_no_chain - add a function to dump vnet buffer details from gdb Type: improvement Change-Id: I143ce845f80e7ef937ea33a557b6e3b5988c5b8f Signed-off-by: Benoît Ganne <bganne@cisco.com>
2021-08-18vhost: interrupt mode support with mqSteven Luong3-138/+209
vhost interrupt mode support with mq does not work when coalesce frame is not configured to 0. When packed-ring is configured, we were also setting the wrong flag for want-interrupt. No need to trigger an interrupt to RX infra if there is at least one queue in the same thread that is doing polling. Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: I8e64250f2aa6bf611a777a53e4d2c1076d83305f
2021-08-17ip: reassembly cleanupKlement Sekera4-246/+139
Remove unused parameters and fix warnings. Type: fix Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: I2d0e7b84b56817999283ecb6be606159dcb26a28
2021-08-17build: install ethernet/ethernet_types_api.hMohammed Hawari1-0/+1
ip/ip_types_api.h is already installed by the build system Change-Id: Iec43e0ad50e32473d93ea8f7281b5a6477ddc87f Signed-off-by: Mohammed Hawari <mohammed@hawari.fr> Type: improvement
2021-08-14ip: Fix crash in ip address add on sub-int without exact-matchPim van Pelt4-12/+32
Type: fix Creating a sub-int without exact-match set, and subsequently adding an IPv4 or IPv6 address will crash VPP. This fix catches this situation and refuses to allow the caller to add an IPv4 or IPv6 address on an ethernet sub-int that does not have exact-match set. TESTED: Before this change, the following crashes VPP: ``` DBGvpp# cre sub TenGigabitEthernet3/0/0 1 dot1q 10 TenGigabitEthernet3/0/0.1 DBGvpp# set interface ip address TenGigabitEthernet3/0/0.1 2001:db8::1/64 <crash> ``` After the change, VPP refuses to act: ``` DBGvpp# cre sub TenGigabitEthernet3/0/0 1 dot1q 10 TenGigabitEthernet3/0/0.1 DBGvpp# set interface ip address TenGigabitEthernet3/0/0.1 192.0.2.1/30 set interface ip address: sub-interface without exact-match doesn't support IP addressing DBGvpp# set interface ip address TenGigabitEthernet3/0/0.1 2001:db8:1/64 set interface ip address: sub-interface without exact-match doesn't support IP addressing ``` Signed-off-by: Pim van Pelt <pim@ipng.nl> Change-Id: I42997db314225cd186ebb54013b5717ace7f7bd6
2021-08-13ip: punt redirect add nh in apiNathan Skrzypczak9-100/+243
Type: feature Change-Id: Ia970f444ba2f38b7a42ea94942c906f1b541511b Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2021-08-13ip: source address selectionOle Troan5-34/+261
Implement a simple source address selection algorithm for IPv4 and IPv6. IPv6 does not yet implement RFC6724 but supports link-locals. ping now chooses correct source address for link-local destination. Added ping support for link-local multicast (e.g. allnodes). Type: feature Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I1a3382c1f7d4ace0386c2c19e4e47b045b73a3ed Signed-off-by: Ole Troan <ot@cisco.com>
2021-08-12session vcl: cert key add/del with socket apiFlorin Coras3-0/+101
Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I70791285cbf427479d2dcbf70ffdce2253add2fb
2021-08-11svm: make more fifo segment header fields privateFlorin Coras1-4/+4
Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Idab0f455b52a38efd2cf3781497d8cc7f57bfa42
2021-08-11fib: Compiile time option to use 8-8-8-8 stride tries for FIB ratherNeale Ranns2-0/+123
than 16-8-8-8 Type: feature the memory trade-off is: for 8-8-8-8 tries DBGvpp# sh ip fib mtrie mem ipv4-VRF:0 mtrie:8068 hash:3499 totals: mtrie:8068 hash:3499 all:11567 for 16-8-8 DBGvpp# sh ip fib mtrie mem ipv4-VRF:0 mtrie:333056 hash:3499 totals: mtrie:333056 hash:3499 all:336555 Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I5271a4322d786de6e47613cff9bd432762dbed2a
2021-08-11fib: A 16-8-8 and a 8-8-8-8 versions of an ip4_fib_tNeale Ranns13-417/+932
Type: feature The difference being the MTRIE type they contain. THE FIB continues to use the 16-8-8 version. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I5a54d4e6e6cc639f18a3fb65ef2925507a7ef1de
2021-08-11ip: [re]introduce the 8-8-8-8 stride MTRIENeale Ranns3-64/+229
Type: improvement there's a time-space trade-off between the 16-8-8 and 8-8-8-8 stride. FIB continues to use the 16-8-8. Other features are now free to make the choice. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I6691a163486ce62e75e629f6ef0c990f253df8e5
2021-08-11ip: Rename the ip4 mtrie function to be 16_8_8 specificNeale Ranns4-218/+202
Type: improvement the existing mtrie functions use the existing 16_8_8 mtrie. Rename them to make that explicit. Then we can add the 8_8_8_8 types and functions alongside. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: If5ce7a282d5d3742dc65bcd0523220235d9c510d
2021-08-10misc: do not capture tx packets twiceBenoît Ganne1-13/+30
When a packet goes through interface-output, whether it should be captured or not will be evaluated twice: in interface-output and in interface-output-template (<interface_name>-out) node. interface-output should only capture packets if there is an interface filter, otherwise it should defer evaluation to interface-output-template. Type: fix Change-Id: Ia720c5d184a236335e1d7d44d8c04caf87af5630 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2021-08-10ip: Use the IP4 lookup functionsNeale Ranns4-125/+61
Type: refactor as opposed to wrtiing out the mtrie steps one by one each time. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I1248861350f9189f9a67ac6e68940813af279e03
2021-08-10ip: Remove the 'test lookup' CLI commandNeale Ranns1-97/+0
Type: fix There's no such thing as a conflict between the FIB and adj tables. This is code that should have been removed way back in 16.04. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I4524e7921b03b89106dd1f35aa1171d0945367cf
2021-08-09ip6-nd: only respond to RS if sending RA is enabledOle Troan1-1/+6
Even when periodic RAs are disabled VPP would respond to router solicitations. Making it impossible to have an IPv6 enabled interface with hosts connected to it without VPP acting as a default router. This change drops RS messages if the radv_info->send_radv is off. Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I9a68f8e12c93c1c00125b54f8fd454f48fa22caa Signed-off-by: Ole Troan <ot@cisco.com>
2021-08-05classify: fix parsing for l4 matchBenoît Ganne1-1/+1
l4 match parsing should not try to consume the whole input, otherwise it breaks cli such as: 'classify session ... match l4 dst_port 22 action set-ip4-fib-id 2' Type: fix Change-Id: I81a1b5779811f7df8286a371f85fafe09c947b87 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2021-08-05ip: fix ip punt redirect cliBenoît Ganne2-13/+12
- restore fib paths support for ip4 - initialize payload_proto to the relevant default protocol so that 'via <dev>' paths are supported - fix 'rx all' - fix temp path vector mem leak Type: fix Change-Id: I564d88dc4dce86884ff6791af69974e6d70ff7ca Signed-off-by: Benoît Ganne <bganne@cisco.com>
2021-07-29ip: add api test fileFilip Tehlar1-0/+1527
Type: improvement Signed-off-by: Filip Tehlar <ftehlar@cisco.com> Change-Id: I49c4183a443b7b39924328900e6a6ac2e09be426
2021-07-29ipsec: move startup config to common fileZachary Leaf3-51/+55
The ipsec startup.conf config currently exists in ipsec_tun.c. This is because currently the only ipsec{...} options are tunnel related. This patch moves the ipsec config to a common file (ipsec.c) for future extensibility/addition of non-tunnel related config options. Type: refactor Signed-off-by: Zachary Leaf <zachary.leaf@arm.com> Change-Id: I1569dd7948334fd2cc28523ccc6791a22dea8d32
2021-07-28gre: set proper fib index for unnumbered interfaces, unset fib index before ↵Stanislav Zaikin5-7/+67
forwarding gre payload This commit introduces 2 fixes: 1) After GRE decapsulation sw_if_index[VLIB_TX] is set as fib index of GRE tunnel. But since GRE tunnel can work on v4 endpoints and have v6 payload, we need to reset it. In case we get IPv6 packet inside IPv4 GRE tunnel (or vice-versa) fib index can be (and usually is) invalid. 2) Check that ip-table and ip6-table are the same when setting interface as an unnumbered one. Also, fix for the pipe test include setting the right unnumbered interface for the pipes Type: fix Signed-off-by: Stanislav Zaikin <zstaseg@gmail.com> Change-Id: Id13d239cfdd21e0db6b1c9725f01c40d4af4d800
2021-07-27udp: add option to disable icmp unreachablesFlorin Coras3-82/+49
Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I90c2a191ab34a2a7df3fb0a951e5fc78f40ccfe2
2021-07-24session: avoid vpp deadlock due to app crashliuyacan1-0/+6
In high traffic scenarios, if app crashed or hang on somewhere, app_mq will quickly accumulate to full, after which vpp worker will try 100 times before giving up allocating slot for every msg. This will cause vpp main thread barrier sync to fail. Type: fix Signed-off-by: liuyacan <liuyacan@corp.netease.com> Change-Id: I2b2bf2b272c5b3ca7e4a56af179af12bbcde149d
2021-07-23session vcl: support abstract sockets for app nsFlorin Coras4-16/+132
App namespaces can now be associated to a linux ip netns, e.g.: app ns add id <ns_id> secret <n> sw_if_index <n> netns <netns> If session layer's app sock api is enabled, this triggers the creation of an abstract listening socket in the netns that has been configured. For the example above that would be @vpp/session/<ns_id>. Consequently, vcl, or other apps attaching to vpp, can connect to said abstract socket from an ip netns without the need to share unix domain socket files. In particular, for vcl it's enough to set app-socket-api to @vpp/session/<ns_id> in the conf file. Type: feature Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I26fdc626a760a3f423c5b8be4251623f6e9cd73a
2021-07-22session vcl: explit mq indices in ctrl messagesFlorin Coras2-3/+5
Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I8e80252b85dda9a8f5699109264dc1b913581442
2021-07-22vppinfra: add abstract socket & netns fnsNathan Skrzypczak1-32/+14
* Add clib_socket_init support for abstract sockets if name starts with an '@' * Add clib_socket_init_netns to open socket in netns * Add clib_netns_open Type: feature Change-Id: I89637ad657c702ec38ddecb5c03a1673d0dfb104 Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2021-07-22interface: Byte swap the duplex value in interface detailsNeale Ranns1-2/+2
Type: fix Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I6d9473a7b5ab0fbd460e80df36368dd43c5e4fee
2021-07-21session: fix unlisten rpc barrier releaseFlorin Coras1-4/+5
Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I9301fbbcd611033b4b6ad5313edbc66840f5bb3a
2021-07-19session: option to use memfd segs for builtin appsFlorin Coras2-41/+43
Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Iecb171c9451c0fa9a7c6ae4b3e9ab7774a4fe585
2021-07-16vlib: add tunnel offload flags for vlib_buffer_tMohsin Kazmi2-3/+18
Type: improvement Change-Id: Iaad50b2044702c46eff287708dfcb24e61022104 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2021-07-16ip6-nd: refactor neighbour advertisement codeMohsin Kazmi2-61/+104
Type: refactor Refactor neighbour advertisement code into inline function to be used solely in feature nodes. Change-Id: I1e84c54f9807b4e3d90c37526c78a7afcb0ba087 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2021-07-15ip-neighbor: GARP sent to bogus ip addressSteven Luong1-2/+2
The function ip4_neighbor_advertise may be called with NULL addr. In that case, it looks up addr from fib by calling fib_sas4_get which returns true or false to indicate whether there is an ip address associated with the interface or not. But the caller to fib_sas4_get does not check the return code and blindly assumes there is always an ip address associated with the interface. As a result, it ends up sending GARP to the bogus ip address if there is no ip address associated with the interface. Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: I7aa0270766c3943ed8ca8f8a092cae34567fd30e
2021-07-15misc: replace CLIB_PREFETCH with clib_prefetch_{load,store}Damjan Marion36-140/+142
Type: refactor Change-Id: Id10cbf52e8f2dd809080a228d8fa282308be84ac Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-07-14ip: fix check_adj_port_range_x1Damjan Marion1-2/+2
Type: fix Change-Id: I776bf797e07bb3cfd0510a4c09d8182edfa193bd Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-07-14classify: cheaper way to check if all elements are zeroDamjan Marion1-1/+1
Type: improvement Change-Id: I5f4517c65c37c5d73fcd608dc29dfb1d25d4cd8d Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-07-14ip: improve check_adj_port_range_x1Damjan Marion1-35/+5
Type: improvement Change-Id: I8337f81fdcd196fcb0e61f8129fec322e9a1e8f1 Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-07-13vppinfra: put each vector function into own fileDamjan Marion1-1/+2
Type: refactor Change-Id: I2dd9a18497992ac7e2686c14f5d17eccccda0cda Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-07-13misc: remove vnet_all_api_h and vnet_msg_enumFilip Tehlar8-128/+0
These file are no longer needed Type: improvement Signed-off-by: Filip Tehlar <ftehlar@cisco.com> Change-Id: I34f8e0b7e17d9e8c06dcd6c5ffe51aa273cdec07
2021-07-13fib: Set the GLEAN flag on attached export routes so that the SAS worksNeale Ranns4-38/+63
correctly. Type: fix Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I4bc2eb394a8f9d01c5a12de2ce963c22209d5439
2021-07-13tcp session: next node config on connectsFlorin Coras2-3/+9
Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Ief06b1509d31b55efc8d1436b6ff9e01c6037a32
2021-07-13misc: fix init order to avoid startup warningsBin Zhou (bzhou2)2-19/+6
Put plugin init order inside plugin instead of in vnet Type: improvement Signed-off-by: Bin Zhou (bzhou2) <bzhou2@cisco.com> Change-Id: Icbacdb3f1cb4ac9d74e3f78458e8bc333793b4d6
2021-07-12session: api cleanupFilip Tehlar3-75/+34
Use autogenerated code. Does not change API definitions. Type: improvement Signed-off-by: Filip Tehlar <ftehlar@cisco.com> Change-Id: Iacc58d27ac51c8a1c571087f98297e046b3477c2
2021-07-08session: allow listen in any fib if default namespaceFlorin Coras3-3/+12
Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: If0712f01bdd6f2fc892bcbe4e2cee28affd02520
2021-07-08interface: unable to to assign tx queue to last worker threadSteven Luong1-4/+3
Using the cli "set interface tx-queue", it is not possible to assign tx queue to the last worker thread. The reason is that vdm->first_worker_thread_index is 1. Adding that to clib_bitmap_last_set (bitmap) exceeds vdm->last_worker_thread_index when the CLI specifies the last worker thread. Also make the threads argument optional to enable user to unbind a queue from any thread. Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: I796259c20f571289c8f5a97b9418caf452d0ab3d