Age | Commit message (Collapse) | Author | Files | Lines |
|
vnet_feature_arc_init:215: feature node 'mpls-qos-mark' not found (after 'vlan-mpls-qos-record', arc 'mpls-input')
vnet_feature_arc_init:215: feature node 'ip6-qos-mark' not found (after 'vlan-ip6-qos-record', arc 'ip6-multicast')
...etc...
Change-Id: I22cb98d57e2480f5978fff315b77b9cbb6a9f9dd
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
(cherry picked from commit 8d753f906ecdd152af1e524919e99bd9ab45de46)
|
|
Change-Id: Icec79aa9039d5d7835d311fde0b7c1a0c76c9eb1
Signed-off-by: Neale Ranns <nranns@cisco.com>
(cherry picked from commit 0809f6c0300f85cf5cf5d49df1aa8f1e2d080f6c)
|
|
Can happen if code bypasses the per-interface output node, and
dispatches packets directly to the tx node.
Switch to vlib_get_buffers(...) ... vlib_buffer_enqueue_to_next (...),
quad/single loop coding pattern.
Change-Id: Ic0e5d3b9748230f4e545a54186e6e64e7a782bb1
Signed-off-by: Dave Barach <dave@barachs.net>
(cherry picked from commit 78451a6a660cd26a67d2284219f48878a2dfe2c3)
|
|
each edge/arc from these nodes must be the same.
Change-Id: Id5dace61bca0af71ad1df98583425226e81fd0de
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
(cherry picked from commit 8a03e4f97952d84e152f5b17d5325583604c4fd3)
|
|
Change-Id: I2abb3ceebae3a32cee9aa2a999bd47c37719d3ac
Signed-off-by: Eyal Bari <ebari@cisco.com>
Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
(cherry picked from commit 07f3586c5a9868ccee381af528de39b373d7720a)
|
|
Change-Id: Ia563b279e85b5da93f79db5a2a4d9b8c04f5be99
Signed-off-by: Eyal Bari <ebari@cisco.com>
(cherry picked from commit b52c034c7d53014e9d5c1dfc3501e9adfb0c6391)
|
|
Change-Id: I5c381dfe2f926f94a34ee8ed8f1b9ec6038d5fe2
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
(cherry picked from commit 208c29aac523231af2420a95ba7e5d361698780b)
|
|
Remove broken special case from l2_input.c:set_int_l2_mode(), which
turns out to confuse the graph dispatch engine.
The loopback TX function needs to push packets to either
ethernet-input or to l2-input, based on bridge / BVI
configuration. Rather than overloading a single graph arc - and making
vain attempts to reconfigure it - create both arcs and use the correct
one.
Rewrote the loopback tx function as an idosyncratic multi-arch
quad/single loop fn.
Change-Id: I15b56ce641d90a11e7b3c7d23859f40e168dd7b2
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
For L2 ARP termination, use both brodcast ARP request and reply
packets to provide MAC/IP binding events.
For IP4/IP6 neighbor adress resolution, send resolution events
if there is an address resolution attemp with a static neighbor
entry where both IP and MAC matches. This allow probe of an IP
neighbor with a static entry to confirm it is responding with
a reply matching that of the static entry.
Change-Id: Iffb923bb5aea3f9021436735d5ca06e7b24f966f
Signed-off-by: John Lo <loj@cisco.com>
|
|
Remove useless unsigned comparisions: "(unsigned) value < 0", correct
a couple of incorrect limit checks.
Change-Id: I9606c4057df157f770d59535457cb9df1cfd1f35
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I51c4bcbd456d2e7ffbdeef9cc8c7703d1c88b52e
Signed-off-by: Francois Clad <fclad@cisco.com>
|
|
VPP-1340
Change-Id: Ia3f2fc054dbfb2ba912a768c70466e7042024e32
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
It is cheaper to get thread index from vlib_main_t if available...
Change-Id: I4582e160d06d9d7fccdc54271912f0635da79b50
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
no_flood count was not updated on removal
might couase a negative insertion index when adding new members
Change-Id: I2caf2c453dfef1a9f16fb8fa2e5af42b4e653a69
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Freeing the prefix and address vectors after signalling them from
dhcpv6_client_node_fn to either the pd or iana report processes is
absolutely wrong. The code has appeared to work by luck.
This took three full days' worth of expert effort to root cause - in
the context of an unrelated patch - and about one minute to fix.
Change-Id: Ie589ab1a70ae83441ab4e8b6618a6d405741f53f
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I57b4ebca29c0b185770373e8878f89a9bd13b742
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
- Enable/Disable an interface for IGMP
- improve logging
- refactor common code
- no orphaned timers
- IGMP state changes in main thread only
- Large groups split over multiple state-change reports
- SSM range configuration API.
- more tests
Change-Id: If5674f1044e7e97274a711f47807c9ba689d7b9a
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I0d4630c88d6caacffcd073ebaa12766dfc893f70
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Change-Id: Idee565af852c7bb434b886fbf31c6e76315686c4
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
When using a DPDK cryptodev with IPsec, sending outbound
packets results in a crash on division by zero if using an
algorithm not supported by the OpenSSL ESP nodes. This
includes AES-GCM and MD5.
At IPsec intf creation time, the next node at slot
IPSEC_OUTPUT_NEXT_ESP_ENCRYPT for ipsec_if_tx_node_fn is
set to the node named esp-encrypt. This is the OpenSSL
ESP encrypt function. If DPDK cryptodevs are configured,
dpdk-esp-encrypt is the correct next node.
Change to setting the next node according to the value in
ipsec_main.esp_encrypt_node_index. That value is set to
esp-encrypt by default. If DPDK cryptodevs are configured
it gets set to dpdk-esp-encrypt.
Change-Id: I83896c76b975d74aead247a162c85eccca9575a8
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Change-Id: Ic5daed1f6c23d9561a04e235dcbf257f190d066a
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
It also refactors the vhost code which was in one big file vhost-user.c.
Receive side code is in vhost_user_input.c and
Transmit side code is in vhost_user_output.c
Change-Id: I1b539b5008685889723e228265786a2a3e9f3a78
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
A pipe resembles a unix pipe. Each end of the pipe is a full
VPP interface.
pipes can be used for e.g. packet recirculation, inter-BD, etc.
Change-Id: I185bb9fb43dd233ff45da63ac1b85ae2e1ceca16
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
* added the fib index into the key
* conform coding style for vxlan.h
* added "show vxlan tunnel raw" command to dump bihash
Change-Id: Icc96e41abb648e96de5b4605b035f68f9e20f8a9
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Change-Id: Ibfd0a2e7010e6e74c32244c538f60e0713bea03f
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: I383cfb662b4d2bf4f814e3eb9a1ce4d6bff7066d
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I8b92652d512bad5d774c7862f9808c306bbeff18
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: I4554d1e94bd70ef5b3b0aaeb1a0fceaeb81c5f96
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I0573d0aff39581bba96e610228a10ae923a8ca06
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ib988d87e6758ffa31862096391f9f286b0797f2b
Signed-off-by: Vijayabhaskar Katamreddy <vkatamre@cisco.com>
|
|
Also add single loop prefetch in session tx
Change-Id: Ib2725a2552fcc1a65050d7a2eb10491a7b34db62
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Does some session node cleanup as well
Change-Id: Ifd52b07b28ba4dec1f6f729476decc76eb963837
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I843d094b6bbd1cefba82d6026174be005e66d510
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
outside the ip_frag nodes
Change-Id: I46d3d10fa763fcf7a579620ec7cf1b204a53bce8
Signed-off-by: Vijayabhaskar Katamreddy <vkatamre@cisco.com>
|
|
and a new ip4-options node, inserted between ip4-input and ip4-punt,
that checks for IP-router-alert option + IGMP combination and sends
the packet to the ip4-local. This is required because some IGMP
packets are sent to the group address and not the all-routers address.
All IGMP packets are sent with the router alert option.
Change-Id: I01f478d4d98ac9f806e0bcba0f6da6e4e7d26e2a
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ib88d703bb7d4b170059960b0688352c90c5fcc39
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Idcba72fd84128547718dd32858e8c728925a6b1d
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I19690db9996ecb8c5e86415d2fd3c7133ce698f8
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: Ida678e6f31daa8decb18189da712a350336326e2
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
gcc8 introduced a new warning (Wstringop-truncation) which in our case
is being treated as error.
Disabling the warning globally might introduce bugs related to string
truncation which are not desired by the developer (e.g. bug).
Instead, this patch disables the warning only for those occurences
which have been verified to be non-bugs but the desired behaviour as per
developer will.
Change-Id: I0f04ff6b4fad44061e80a65af633fd7e0148a0c5
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
- cache and reuse tcp options and rcv_wnd for session layer tx bursts
- avoid reading/setting total_length_not_including_first_buffer. It's
part of a buffer's second cache line so it comes at a "cost".
Change-Id: Id18219c2f7e07cf4c63ee74f9cdd9e5918904036
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
ASSERT (ip_csum_with_carry (d, x) == c) will raise assert
if d equals to zero while x not equals to zero.
Change-Id: Ia9ccdbf801ae565eaadd49f04569d13bfc31cba8
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
|
|
Change-Id: I00a0d7f57dc144d338d5ad45b0a6e3720c32c400
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Thanks to gcc-8 for highlighting this...
Change-Id: I53bfab631a40fd1b680c76a48b0307a33fa2b154
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
- sprinkle statics for functions
- move some inlines from header files to corresponding .c files
- replace some always_inlines with statics where inlining is not
performance critical
Change-Id: I371dbf63431ce7e27e4ebbbdd844a9546a1f1849
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Check ARP request packet with bad requester MAC/IP address and
drop these packets. Also removed useless VRRP check in the node.
Change-Id: I2c8a774d291928eb623b3a515f1edf7e338fa760
Signed-off-by: John Lo <loj@cisco.com>
|
|
Because it avoids pool putting/getting the timer, this function is
somewhat faster than stopping and restarting a timer.
Change-Id: Id99ed9d356b0b1f7e12facfe8da193e1cd30b3ec
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Only remaining traces of MAP in the src/vnet is now in buffer.h.
Awaiting a new buffer opaque API (hint, hint).
Change-Id: Ie165561484731f1d7ed6e0f604b43624e06db3f0
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
This reverts commit e0d2bd6bd7fc59c0c6ac48195d7f825dc99bfd91.
Change-Id: If491e16f9ea66b2493a6a7c7f3c684ed585f8f51
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
This reverts commit a98346f664aae148d26a8e158008b773d73db96f.
Change-Id: Iee5b3a5ddff0e8fd3a30fe5973cee24de434fe12
Signed-off-by: Ole Troan <ot@cisco.com>
|