summaryrefslogtreecommitdiffstats
path: root/src/vnet
AgeCommit message (Collapse)AuthorFilesLines
2017-08-03DHCP Client: receive unicast ACKsNeale Ranns2-8/+80
despite VPP DHCP client setting neither ciaddr nor giaddr and setting the broadcast bit (see RFC 2131 section 4.1) some DHCP servers will still send a unicast DCHPACK. So as not to drop this VPP must have both 1) a receive FIB entry for the OFFERED IP adress and 2) a 'don't drop me because of uRPF' FIB entry for the DHCP server's address. Change-Id: I167d858deb45629318cbdccf5bf67d971730a42f Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-08-03Add support for API client to receive L2 MAC eventsJohn Lo9-162/+497
Added APIs want_l2_macs_events and l2_macs_event to allow an API client to receive notification events from VPP for MAC learned or aged in L2FIB. Only one API client is allowed for L2 MAC events. The want_l2_macs_events API allow caller to specify MAC learn limit, event scan delay and max number of MACs that can be included in a event message. These parameters should be choosen properly as to not have too many MAC events sent by VPP and overwhelm the API share memory. They can all be left as 0's so VPP will setup reasonable defaults which are: 1000 learn limit, 100 msec scan delay and 100 MACs per event message. If want_l2_macs_events is never called, VPP learning and aging should behave as before except that MAC entries provisioned by API or CLI will not be aged, even if it is not set as static_mac. These non static MACs, however, can be overwritten by MAC learning on a MAC move as a leared MAC. Only learned MACs are subject to aging. Change-Id: Ia3757a80cf8adb2811a089d2eafbd6439461285c Signed-off-by: John Lo <loj@cisco.com>
2017-08-02LISP: make TTL for map register messages configurableFilip Tehlar5-0/+153
Change-Id: I38e1c6a6b033e12ef3f4345a1deff73fa4adbea0 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-08-02Fix vpp crash sending arp or probing neighb (VPP-917)Pavel Kotucek2-0/+29
VPP crash when trying to send arp message or to probe neighbor over interface with IP address but without hw address (local0 and tunnels - vxlan, gre, ...) Change-Id: I08a1c97d3ea913fc11b2886cf73b2ccc31356664 Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
2017-08-02Fix ip checksum offload, move badly-placed ASSERTDave Barach2-2/+4
Change-Id: I5e04d618c4b4987edc64f6d82fd0a81b8362dbb0 Signed-off-by: Dave Barach <dbarach@cisco.com>
2017-08-02Fix tcp tx buffer allocationFlorin Coras11-111/+363
- Make tcp output buffer allocation macro an inline function - Use per ip version per thread tx frames for retransmits and timer events - Fix / parameterize tcp data structure preallocation - Add a couple of gdb-callable show commands - Fix local endpoint cleanup Change-Id: I67b47b7570aa14cb4634b6fd93c57cd2eacbfa29 Signed-off-by: Florin Coras <fcoras@cisco.com> Signed-off-by: Dave Barach <dave@barachs.net>
2017-08-02Make ip csum configurable in vlib buffer functionsFlorin Coras8-24/+28
Also fixes csum computation for lisp control plane 4o6 encapsulated control messages. Change-Id: I991e0b5c0d16dc51e0b5bdc79e1d752270b34765 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-08-01FIB path weight incorrect in dump (VPP-922)Neale Ranns6-11/+17
Change-Id: I655f41878ca3595681d0255782b0faba01c9824b Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-08-01P2P EthernetPavel Kotucek13-29/+546
Change-Id: Idb97e573961b3bc2acdeef77582314590795f8c3 Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
2017-08-01SPAN/API:enable L2 dumpEyal Bari2-6/+10
Change-Id: Icea1dff33aae35a85ae1a7ed1900a0abb3fe4b6b Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-07-31CLI:add l2 input/outut to "sh int features"Eyal Bari6-15/+79
Change-Id: If608bbc7f4c8b0d5c3a237098a20279e407c82d3 Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-07-31Fix fib_path encoding (VPP-921)Florin Coras1-0/+2
Change-Id: I4c3b22c333b052d068f1a5977e9d4e38471693d6 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-07-31SPAN/CLI:fix disable + add errorsEyal Bari1-16/+44
Change-Id: I3c697615698b622a2484df43fb78980be9b7ae98 Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-07-30Make tcp active open data structures thread safeFlorin Coras18-254/+315
- Cleanup half-open connections and timers on the right thread - Ensure half-open connection and transport endpoint pools are thread safe - Enqueue TX events to the correct vpp thread in the builtin client - Use transport proto in transport connections instead of session type Change-Id: Id13239a206afbff6f34a38afa510fe014e4b2049 Signed-off-by: Florin Coras <fcoras@cisco.com> Signed-off-by: Dave Barach <dave@barachs.net>
2017-07-27ping: fixing wrong value when there are worker threadsMohammed Hawari2-9/+21
- the echo_reply_node is now notifying the cli process on the main thread/vlib_main - the timestamp for the icmp reply is now acquired in the echo_reply_node and not in the cli process to avoid an off by 10ms error (see 【vpp-dev】delay is error in ping with multi worker thread) Change-Id: I21d37002b0376b4f2ccab08d8f04c2f2944b9b39 Signed-off-by: Mohammed Hawari <mhawari@cisco.com>
2017-07-27Fix interface reuse when running multithreadedDamjan Marion1-4/+12
Node function pointer was not set on all node runtimes causing crash if new interface is different type. Change-Id: I4661fe883befc6cd3fc6dfc14fd44f6fa5faf27c Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-07-27vhost: debug vhost-user command needs better error checking on the syntax ↵Steven1-5/+26
(VPP-916) The syntax for debug vhost-user is debug vhost-user <on | off> However, currently the code does not reject the invalid command such as below debug vhost-user debug vhost-user on blah debug vhost-user off blah The fix is to enforece the correct syntax and reject the command when invalid option is entered. Change-Id: I1a04ae8ddb6dd299aa6d15b043362964e685ddde Signed-off-by: Steven <sluong@cisco.com> (cherry picked from commit 6a4de2764d9e6cadf36af824dddb3f33c2d6dc7e)
2017-07-26Fix lisp udp checksumFlorin Coras1-6/+18
Change-Id: I16c3f5a97c45e504eec94ce131e854d7da9cd0e3 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-07-25Cleanup/refactor session layer codeFlorin Coras14-983/+1109
Change-Id: Ica99e8cb919fca6b069c37c969d60e8ccc2c6bf9 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-07-24SPAN:add l2 mirrorEyal Bari8-137/+276
added span feature nodes for l2-input / l2-output Change-Id: Ib6e0ce60d0811901b6edd70209e6a4c4a35cd8ff Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-07-23Improve L2 Input/Output Feature Infrastructure and UsageJohn Lo15-333/+159
Simplify L2 output feature infra to unify with L2 input feature infra using the newly improved feature bitmap mechanism. Updated all L2 features to use the more efficient infra functions. Change-Id: If8f463826b0af0717129befe92a27ea8cfc40449 Signed-off-by: John Lo <loj@cisco.com>
2017-07-21Improvements to tcp rx path and debuggingFlorin Coras13-183/+612
- Increment rcv_nxt for fin packets - Call tcp_segment_rcv only if buffer has data - Parse rcv opts before deleting half-open connection - Fix initial rcv_wnd - Improved event logging Change-Id: I9b83c04f432c4cec832c480b03e534deff02c3b1 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-07-21SNAT: in2out translation as an output feature hairpinning (VPP-913)Matus Fabian1-0/+6
Change-Id: I3790739683c6090ffb2aefb4758bd4275856c09a Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-07-20Fix coverity issue introduced with IP checksum offload commitDamjan Marion1-3/+3
Change-Id: Ib5ad1369678389534426902ce698bccf7a6d9ec2 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-07-20Prevent double freeing of first segment manager.Dave Wallace1-1/+2
Change-Id: I27d7cb4c4e142f29a0c3c3ff85dd1f581970abfc Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2017-07-20L2FWD:move vec_validate out of access functionEyal Bari2-2/+9
Change-Id: Id9737b6aa2b6fe3032f4627dfdbd2ea728cc3fb1 Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-07-19Add a bihash prefetchable bucket-level cacheDave Barach3-7/+7
According to Maciek, the easiest way to leverage the csit "performance trend" job is to actually merge the patch once verified. Manual testing indicates that the patch improves l2 path performance. Other use-cases are TBD. It's possible that we'll need to back out the patch depending on what happens. Change-Id: Ic0a0363de35ef9be953ad7709c57c3936b73fd5a Signed-off-by: Dave Barach <dave@barachs.net>
2017-07-19Fix IP checksum offload metadata setupDave Barach1-2/+12
Change-Id: Idf4f8b02337551670d6b7ce1a03799de9c53d19a Signed-off-by: Dave Barach <dave@barachs.net>
2017-07-18FIB path preferenceNeale Ranns13-62/+647
Paths are given a preference, lowest value is 'best'. Only paths that are up are up contribute to fprwarding - that's unchanged. What's new is that of the path's that re up only those that have the best preference contribute. A poor man's primary and backup. It's not true primary/backup function because the FIB must converge before the lower preference paths are used. Change-Id: Ie4453c4a7b1094c6c2b51fe1594b8302103bb68e Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-07-18DHCP client option 61 "client_id"Neale Ranns4-2/+19
the existing seeting of client_id to a VPP version number was unused and so overridden Change-Id: If9ebea936336f1fcca8d07e67186c95f8f8f0ccd Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-07-18DHCP client - remove interface address when DHCP de-configuredNeale Ranns1-0/+1
Change-Id: I63c59e3c13859b51999d283774f7783ef0a6a5ed Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-07-18TCP/UDP checksum offload APIDave Barach6-13/+121
Change-Id: I2cb6ce4e29813f6602b14e6e61713fb381fbcef8 Signed-off-by: Dave Barach <dave@barachs.net>
2017-07-16Adjust replication context to match vnet_buffer(b)Dave Barach1-2/+2
Fixes a coverity warning, albeit not a serious issue. Change-Id: I0fa28342ac4b222c1ba7f7f2befde455fd42d682 Signed-off-by: Dave Barach <dave@barachs.net>
2017-07-15Fixes and improved tcp/session debuggingFlorin Coras9-91/+960
- Fix rx sack option parsing - Add session sack scoreboard tracing and replaying - Add svm fifo tracing and replaying - Scoreboard/svm fifo ooo segment reception fixes - Improved overall debugging Change-Id: Ieae07eba355e66f5935253232bb00f2dfb7ece00 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-07-14vnet_buffer_t flags cleanupDamjan Marion13-103/+108
Change-Id: I123eccea98abafeb31f25d2a162501e2eded60d4 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-07-14Introduce l{2,3,4}_hdr_offset fields in the buffer metadataDamjan Marion12-53/+36
To save space in the first cacheline following is changed: - total_length_not_including_first_buffer moved to the 2nd cacheline. This field is used only when VLIB_BUFFER_TOTAL_LENGTH_VALID and VLIB_BUFFER_NEXT_PRESENT are both set. - free_list_index is now stored in 4bits inside flags, which allows up to 16 free lists. In case we need more we can store index in the 2nd cachelin Change-Id: Ic8521350819391af470d31d3fa1013e67ecb7681 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-07-13Fix typo for non x86 platforms.Christophe Fontaine1-1/+1
Change-Id: Ic31b388cb972fb5f8a3fc42a5412401c3ee3e487 Signed-off-by: Christophe Fontaine <christophe.fontaine@enea.com>
2017-07-13Fix crash with worker threads on 4K VXLAN/BD setup (VPP-907)John Lo8-173/+51
Cleanup mapping of interface output node for the l2-output node when interface is configured to L2 or L3 modes. The mapping is now always done in the main thread as part of API/CLI processing, instead of initiate mapping in the forwarding path which can be in the worker threads. Change-Id: Ia789493e7d9f5c76d68edfaf34db43f3e3f53506 Signed-off-by: John Lo <loj@cisco.com> (cherry picked from commit bea5ebf205e0bec922bf26c6c1a6a9392b4cad67)
2017-07-12Deprecate support for flattened output nodesDamjan Marion4-276/+3
Change-Id: Id117e219146d9994340fb38c00233ea67db8929b Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-07-11Horizontal (nSessions) scaling draftDave Barach22-225/+679
- Data structure preallocation. - Input state machine fixes for mid-stream 3-way handshake retries. - Batch connections in the builtin_client - Multiple private fifo segment support - Fix elog simultaneous event type registration - Fix sacks when segment hole is added after highest sacked - Add "accepting" session state for sessions pending accept - Add ssvm non-recursive locking - Estimate RTT for syn-ack - Don't init fifo pointers. We're using relative offsets for ooo segments - CLI to dump individual session Change-Id: Ie0598563fd246537bafba4feed7985478ea1d415 Signed-off-by: Dave Barach <dbarach@cisco.com> Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-07-11L2INPUT:fix features mask cailculationEyal Bari1-6/+10
Change-Id: I84cea7530b01302a0adeef95b4924f54dc2e41ec Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-07-10vlib: store buffer memory information in the buffer_mainDamjan Marion3-5/+5
Currently, buffer index is calculated as a offset to the physmem region shifted by log2_cacheline size. When DPDK is used we "hack" physmem data with information taken from dpdk mempool. This makes physmem code not usable with DPDK. This change makes buffer memory start and size independent of physmem basically allowing physmem to be used when DPDK plugin is loaded. Change-Id: Ieb399d398f147583b9baab467152a352d58c9c31 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-07-08lldp packet transmission on a bonded interfaceSteve Shin2-4/+8
LLDP packets are dropped at interface output node if each slave's link is configured as the LLDP interface. The admin state is configured and managed by the bonded interface, so slave link's state is down by default. The checking for the admin state UP should be ignored for the slave link. Change-Id: I06ca250f42fcb8cc50e0ea3a3817a2c5b56865df Signed-off-by: Steve Shin <jonshin@cisco.com>
2017-07-07ETH:optimized double is_tagged checkEyal Bari1-2/+24
a double version of is_tagged, uses "free lanes" in _mm_cmpeq_epi16 to check a second tag this code was not yet tested for performance Change-Id: I640017e1cc75c85a33d196ee911a7e4a512d9849 Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-07-06Unlink /dev/shm files on application detach.Dave Wallace4-5/+36
Change-Id: Ieb5522cd5cb27bcbce808d4cd6df5248716da43c Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2017-07-06DHCP complete event sends mask lengthNeale Ranns3-3/+7
Change-Id: I4a529dfab5d0ce6b0bbc0ccbbd89c6b109dbf917 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-07-06VPP-902: LISP-CP: Wrong size in one_l2_arp_entries_get message.Ole Troan1-1/+1
Change-Id: I56bf6b46527f9465d78ed7c08b6e216e50c135ec Signed-off-by: Ole Troan <ot@cisco.com>
2017-07-06devices: show interface rx-placement displays the wrong information (VPP-894)Steven1-1/+3
show interface rx-placement somtimes displays the wrong interface names. This happens when there exists subinterfaces in VPP. The problem is due to the function show_interface_rx_placement_fn is calling format_vnet_sw_if_index_name with hw_if_index instead of sw_if_index. VPP has the concept of sw_if_index and hw_if_index. Each serves a different purpose. When there is no subinterfaces, both hw_if_index and sw_if_index may happen to have the same value. But don't count on it. When the API calls for sw_if_index, we must pass the sw_if_index although the hw_if_index has the same type which the compiler does not catch. Passing hw_if_index for an API which requires sw_if_index may have an unpredictable result such as described in the VPP-894 and sometimes it may even crash if the particular index does not exist. Change-Id: I76c4834f79b88a1c20684fcba64f14b2da142d77 Signed-off-by: Steven <sluong@cisco.com> (cherry picked from commit bafa4d048439fdbcc0bd577e43a2784d1b89bfc5)
2017-07-06Send GARP/NA on bonded intf slave up/down if in active-backup modeJohn Lo4-0/+147
If a bonded interface is in active-backup mode and configured with IPv4 and/or IPv6 addresses, on slave interface link up/down, send a GARP packet if configured with an IPv4 address and an unsolcited NA if configured with an IPv6 address. These packets can help with faster route convergence in the next hop router/switch. Change-Id: I68ccb11a4a40cda414704fa08ee0171c952befa2 Signed-off-by: John Lo <loj@cisco.com>
2017-07-05Add API support for LLDP config/interface setSteve Shin8-42/+301
Add API methods to configure LLDP and set interface to enable/disable. Also add port description TLV for LLDP. Change-Id: Ib959d488c2ab8a0069f143558871f41fcc43a5d3 Signed-off-by: Steve Shin <jonshin@cisco.com>