aboutsummaryrefslogtreecommitdiffstats
path: root/src/vnet
AgeCommit message (Collapse)AuthorFilesLines
2017-10-06tun/tap: Bad packets sent to kernel via tun/tap interfaceSteven2-22/+29
It was observed that under heavy traffic, VPP accidentally sent traffic with the wrong source and destination to the tun/tap interface. Traffic appears to be sent to the wrong direction. This problem is only seen when worker thread is configured. When worker thread is used, TX and RX may reside in different core. Yet both TX and RX threads are sharing the same global variable, namely iovecs without any mutex or memory barrier protection. This creates a race condition when heavy traffic is blasted to VPP, like 1000 pps. We could create a mutex or memory barrier to ensure atomic memory access. But why bother? It is a lot cheaper to just decouple the iovecs such that TX and RX have their own iovecs. Change-Id: I86a5a19bd8de54d54f32e1f0845bae6a81bbf686 Signed-off-by: Steven <sluong@cisco.com> (cherry picked from commit 4ff586d1c6fc5c40e1548cd6f221a8a7f3ad033b) (cherry picked from commit 3fd57e67532bd55701bef7365adc17da229a44dc)
2017-10-04Set MAC address needs the HW interface indexNeale Ranns2-2/+6
Change-Id: I7b175d57b85e626aab00221b6dac0498aebcbeae Signed-off-by: Neale Ranns <nranns@cisco.com> (cherry picked from commit d867a7cf6baffcebbf1b6e408272ec22dc55dd68)
2017-10-04Update L2FIB entry timestamp only if BD aging enabled (VPP-1002)John Lo3-1/+3
Change L2 learning path so it update stale timestamp in MAC entry only if aging is enabled on the BD for the MAC entry. Change-Id: I849154fe7ad2c6c68d6a94a66ca9345f6a98bc07 Signed-off-by: John Lo <loj@cisco.com>
2017-09-28VLAN support on host(af-packet) interface.Akshaya N1-3/+26
On host interface if a VLAN tagged packet is received, linux kernel removes the VLAN header from packet byte stream and adds metadata in tpacket2_hdr. This patch explicitely checks for the presense of VLAN metadata and adds it in VPP packet. Change-Id: I0ba35c1e98dbc008ce18d032f22f2717d610c1aa Signed-off-by: Akshaya N <akshaya@rtbrick.com> (cherry picked from commit 535f0bfe0274e86c5d2e00dfd66dd632c6ae20a9)
2017-09-01Improve L2FIB PDR/NDR performance (VPP-963)John Lo2-18/+29
1. Limit MAC entry update per l2-learn call to reduce update burst when wall clock advance to the the next minute so all MAC time stamps are behind current time. 2. Optimize l2-learn node fast path code sequence. 3. Invalidate cache_key when update MAC entry. 4. Change L2 learn hit counter to L2 learn hit-update counter. 5. Increase L2FIB table memory size to 512MB to fit 4M entries 6. Set MAC learn limit at 4M entries Change-Id: I19572f7f8a4b42a01be025a609fb03af50af16b2 Signed-off-by: John Lo <loj@cisco.com>
2017-08-24vl_api_sw_interface_set_mtu_t_handler: fix assert in vnet_get_hw_interfaceAndrew Yourtchenko1-3/+10
The handler was calling the routines with sw_if_index instead of hw_if_index, fix that by an extra call to vnet_get_sw_interface, and check that the interface type is VNET_SW_INTERFACE_TYPE_HARDWARE before proceeding. Change-Id: I4a6f65f44e250ecdb2b72d2693c9d7db5a52b966 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2017-08-21gpe: fix sub-interface hash lookupFlorin Coras2-10/+10
Change-Id: Ice6b3818ee24c7c248bf61e4d6c1ef2a85cb8fb1 Signed-off-by: Florin Coras <fcoras@cisco.com> (cherry picked from commit af8c8e5d9596b4bb1dc6edc5c3675de5304f6456)
2017-08-19Increase L2FIB MAC learn limit from 1M to 8M entriesJohn Lo1-1/+1
Change-Id: I04589d3613653c402e6628202598972c2fa59d24 Signed-off-by: John Lo <loj@cisco.com>
2017-08-11Fix LISP cp buffer leakageFlorin Coras1-1/+3
Change-Id: Id7e0f967cc510f0b45f043f74493854083ac67ae Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-08-08ping: fixing wrong value when there are worker threadsMohammed Hawari2-9/+21
- the echo_reply_node is now notifying the cli process on the main thread/vlib_main - the timestamp for the icmp reply is now acquired in the echo_reply_node and not in the cli process to avoid an off by 10ms error (see 【vpp-dev】delay is error in ping with multi worker thread) Change-Id: I21d37002b0376b4f2ccab08d8f04c2f2944b9b39 Signed-off-by: Mohammed Hawari <mhawari@cisco.com> (cherry picked from commit 03a6213fb5022d37ea92f974a1814db1c70bcbdf)
2017-07-31Fix interface reuse when running multithreadedDamjan Marion1-4/+12
Node function pointer was not set on all node runtimes causing crash if new interface is different type. Change-Id: I4661fe883befc6cd3fc6dfc14fd44f6fa5faf27c Signed-off-by: Damjan Marion <damarion@cisco.com> (cherry picked from commit c418e4ac7cf36bd64f3130c258d5f1897c245f2b)
2017-07-21vhost: debug vhost-user command needs better error checking on the syntax ↵Steven1-5/+26
(VPP-916) The syntax for debug vhost-user is debug vhost-user <on | off> However, currently the code does not reject the invalid command such as below debug vhost-user debug vhost-user on blah debug vhost-user off blah The fix is to enforece the correct syntax and reject the command when invalid option is entered. Change-Id: I1a04ae8ddb6dd299aa6d15b043362964e685ddde Signed-off-by: Steven <sluong@cisco.com>
2017-07-15DHCP complete event sends mask lengthNeale Ranns3-3/+7
Change-Id: I4a529dfab5d0ce6b0bbc0ccbbd89c6b109dbf917 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-07-13L2INPUT:fix features mask cailculationEyal Bari1-6/+10
Change-Id: I84cea7530b01302a0adeef95b4924f54dc2e41ec Signed-off-by: Eyal Bari <ebari@cisco.com> (cherry picked from commit 8af1b2fdecc883eadfec6b91434adc6044e24cb2)
2017-07-13Fix crash with worker threads on 4K VXLAN/BD setup (VPP-907)John Lo8-173/+51
Cleanup mapping of interface output node for the l2-output node when interface is configured to L2 or L3 modes. The mapping is now always done in the main thread as part of API/CLI processing, instead of initiate mapping in the forwarding path which can be in the worker threads. Change-Id: Ia789493e7d9f5c76d68edfaf34db43f3e3f53506 Signed-off-by: John Lo <loj@cisco.com>
2017-07-10lldp packet transmission on a bonded interfaceSteve Shin2-4/+8
LLDP packets are dropped at interface output node if each slave's link is configured as the LLDP interface. The admin state is configured and managed by the bonded interface, so slave link's state is down by default. The checking for the admin state UP should be ignored for the slave link. Change-Id: I06ca250f42fcb8cc50e0ea3a3817a2c5b56865df Signed-off-by: Steve Shin <jonshin@cisco.com> (cherry picked from commit 042a621b90c9f521b546cbbf724bb908e36f3b25)
2017-07-08LLDP: properly parse lldp cmds from startup configKlement Sekera1-3/+1
Change-Id: I0e6c86bd923fcf7cf16f948b9869a5927e6d3745 Signed-off-by: Klement Sekera <ksekera@cisco.com> (cherry picked from commit 3d62a7f0b9a4b967ad53f5990729acca932f90b4)
2017-07-08Add API support for LLDP config/interface setSteve Shin8-42/+301
Add API methods to configure LLDP and set interface to enable/disable. Also add port description TLV for LLDP. Change-Id: Ib959d488c2ab8a0069f143558871f41fcc43a5d3 Signed-off-by: Steve Shin <jonshin@cisco.com> (cherry picked from commit 99a0e60eb6f6acd7eabd5a4cb7ded1e0419ccd54)
2017-07-06Send GARP/NA on bonded intf slave up/down if in active-backup modeJohn Lo4-0/+147
If a bonded interface is in active-backup mode and configured with IPv4 and/or IPv6 addresses, on slave interface link up/down, send a GARP packet if configured with an IPv4 address and an unsolcited NA if configured with an IPv6 address. These packets can help with faster route convergence in the next hop router/switch. Change-Id: I68ccb11a4a40cda414704fa08ee0171c952befa2 Signed-off-by: John Lo <loj@cisco.com> (cherry picked from commit 8b81cb43359380e50d3fc216d93ff05894149939)
2017-07-06VPP-902: LISP-CP: Wrong size in one_l2_arp_entries_get message.Ole Troan1-1/+1
Change-Id: I56bf6b46527f9465d78ed7c08b6e216e50c135ec Signed-off-by: Ole Troan <ot@cisco.com>
2017-07-01devices: show interface rx-placement displays the wrong information (VPP-894)Steven1-1/+3
show interface rx-placement somtimes displays the wrong interface names. This happens when there exists subinterfaces in VPP. The problem is due to the function show_interface_rx_placement_fn is calling format_vnet_sw_if_index_name with hw_if_index instead of sw_if_index. VPP has the concept of sw_if_index and hw_if_index. Each serves a different purpose. When there is no subinterfaces, both hw_if_index and sw_if_index may happen to have the same value.But don't count on it. When the API calls for sw_if_index, we must pass the sw_if_index although the hw_if_index has the same type which the compiler does not catch. Passing hw_if_index for an API which requires sw_if_index may have an unpredictable result such as described in the VPP-894 and sometimes it may even crash if the particular index does not exist. Change-Id: I76c4834f79b88a1c20684fcba64f14b2da142d77 Signed-off-by: Steven <sluong@cisco.com>
2017-06-30IP4/IP6 FIB: fix crash during interface deletePavel Kotucek4-1/+42
after deleting a sub interface with IP4/IP6 address vpp crash Change-Id: Ie768ca845b9e2394f61e2a8e9722a80a788746e7 Signed-off-by: Pavel Kotucek <pkotucek@cisco.com> (cherry picked from commit 9f5a2b6310ce5c8e59c32ca6f27d8a187b0e4346)
2017-06-29VPP debug image with worker threads hit assert on adding IP route with ↵Neale Ranns1-1/+16
traffic (VPP-892) When stacking DPOs the VLIB graph is also updated to add the edge between the nodes, if this edge does not yet exist. This addition should be done with the workers stopped. Change-Id: I327e4d7d26f0b23eb280f17e4619ff2093ff7940 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-06-27L2-LEARN:fix l2fib entry seq num not updated on hit (VPP-888)Eyal Bari5-87/+64
fixed instability in l2bd_multi_instnce test - sometimes failing with extra packets captured it appears l2-learn was not updating hit entries but rather a copy of them. if the ager did not have a chance to run before the test was running the learning cycle - entries were not updated with the packet's seq num - causing packets to flood when hitting the stale seq_num in l2-fwd - hence the extra packets fixed handling of filter entries revert workaround for instability in test Change-Id: I16d918e6310a5bf40bad5b7335b2140c2867cb71 Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-06-26VPP-889: MAP Stats API/CLI crashes when no domains.Ole Troan2-1/+11
Change-Id: Ib7824bfc08cb3c8f20258379e1a1f2c159c4f687 Signed-off-by: Ole Troan <ot@cisco.com>
2017-06-25VPP crash on creating vxlan gpe interface. VPP-875Hongjun Ni3-6/+11
Change-Id: I6b19634ecb03860a7624d9408e09b52e95f47aef Signed-off-by: Hongjun Ni <hongjun.ni@intel.com> (cherry picked from commit 04ffd0ad83b2d87edb669a9d76eee85f5c589564)
2017-06-22Update lisp map record default ttl to 24hv17.10-rc0Florin Coras1-2/+2
Change-Id: Ib8c72f8e08e89357b64f2f69ab70d60d3a7ec506 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-06-22Improve svm fifo and tcp tx path performance (VPP-846)Florin Coras6-25/+137
- multiarch on svm fifo - avoid ip lookup on tx Change-Id: Iab0d85204a710979417bca1d692cc47877131203 Signed-off-by: Florin Coras <fcoras@cisco.com> Signed-off-by: Dave Barach <dbarach@cisco.com>
2017-06-22VNET:explicitly pad l2_classifyEyal Bari1-10/+4
Change-Id: I77412aa8c17b45b1533604e7bfe8fe052ed0f80a Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-06-21Introduce default rx mode for device driversDamjan Marion4-6/+18
If interface is down and queues are not configured then we are not able to change rx-mode. This change introducess default mode which is stored per interface and applied if driver wants. Change-Id: I70149c21c1530eafc148d5e4aa03fbee53dec62f Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-06-21ARP: ignore non-connected routes and non-interface sources when determing if ↵Neale Ranns2-33/+104
source is connected Change-Id: I39fb0ec44cc322eaa12c0ff0700fc405d3982bfc Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-06-20vlib: make runtime_data handling thread-localIgor Mikhailov (imichail)1-16/+26
Change-Id: Ic2f2dc234199a5f882846880cbacff20fc8d477b Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
2017-06-20VPP-879 MAP: s/u32 is_add/u8 is_add in map.apiOle Troan1-1/+1
Change-Id: If35171005e409f77bed4cc16eccb66a85aae5dfb Signed-off-by: Ole Troan <ot@cisco.com>
2017-06-19L2FWD:fix seq_num overwritten + validate l2fib entries when forwardingEyal Bari8-56/+99
l2_classify memeber table_index was overlaid over l2.l2fib_seq_num which over written when table_index gets initialized in l2_input_classify solved by overlaying both table_index and opaque_index as only one is used seperated l2fib seq num from l2_input configs for better handling of theoretical ABA issue where an entry for a deleted interface is considered valid by the ager because a different interface with same sw_if_index and seq_num was created before the ager got a chance to delete Change-Id: I7b0eeded971627406f1c80834d7e02c0ebe62136 Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-06-19Overall tcp performance improvements (VPP-846)Florin Coras17-426/+664
- limit minimum rto per connection - cleanup sack scoreboard - switched svm fifo out-of-order data handling from absolute offsets to relative offsets. - improve cwnd handling when using sacks - add cc event debug stats - improved uri tcp test client/server: bugfixes and added half-duplex mode - expanded builtin client/server - updated uri socket client/server code to work in half-duplex - ensure session node unsets fifo event for empty fifo - fix session detach Change-Id: Ia446972340e32a65e0694ee2844355167d0c170d Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-06-19NAT64: Hairpinning (VPP-699)Matus Fabian2-28/+49
Change-Id: I83a6c277fa211ac2c2ca2d603650c992886af0a7 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-06-17Fix map-notify processing with multiple workersFlorin Coras2-13/+44
Change-Id: Id160346ebf533ee5f55bd735803624a75ed997b9 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-06-16LISP-GPE: add test CLI for NSHFilip Tehlar2-0/+132
Change-Id: I9999474c1a4b744f5d5880ee99a0293c576f2819 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-06-16Add missing barrier sync to rx placement infra codeDamjan Marion2-6/+18
Change-Id: I25ccf8260dbe7e1550aee3904a688fc135ce1f03 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-06-16Fix vni/dp_table endianness for gpe iface addition (VPP-882)Florin Coras1-6/+8
Change-Id: I2b78dad740b67fc05b0e2cf9c180809bc0962cd5 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-06-16Fix gpe_native_fwd_rpaths_get (VPP-883)Florin Coras1-1/+3
Change-Id: Iab2aa5fd92b9e95049f55fce4177e236a482723c Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-06-15Add VAT handlers for LISP-GPE APIFilip Tehlar2-11/+24
Change-Id: Id1139533c41cabef48394b5d79750608e0b74179 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-06-14Fix session api connect sock handler.Dave Wallace1-1/+10
Change-Id: I034efb9fc3ebb846c0aef07b18c1f110b8cbf3e3 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2017-06-14ETH:fix l2_len/vlan count mismatch for > 2 tagsEyal Bari3-16/+7
l2_len was not updated for the third tag as the ethernet node retracts by the vlan count after parse_header (using ethernet_buffer_header_size) it ends up pointing before the ethernet header + some minor cleanups Change-Id: I4ccaedd33928912e5d837376f146503b27071741 Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-06-13FIB walk process - wake-up rate unnecessarily highNeale Ranns1-1/+11
Change-Id: I7dedf283c83c7f0e0b7642f095b68bc0b40898cf Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-06-12L2FIB:fix crash in show with deleted subif entriesEyal Bari1-4/+7
after deleting a sub interface it's l2fib entries are left with a dangling sw_if_index (while waiting for the ager to delete them). changed "show l2fib" to reflect that state with "Deleted" as the interface name. added sleep in test_l2_fib as a workaround for packets still passing after flush will investigate... Change-Id: Id998d7d3c6a073ef5005c5f3009e1cfb7febf7db Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-06-12NAT64: bug fixMatus Fabian1-5/+9
ICMP to ICMPv6 error message inner UDP packet translation delete ST entries when deleting static BIB entry Change-Id: I2a28631ac040e20827a692331506cd8254f70916 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-06-12Remove calls to crc_u32 and add clib_crc32c for armv8+crcChristophe Fontaine1-26/+16
crc_u32 was not defined for non x86_64 with SSE4.2 processors. Calls to "crc_u32" are removed and replaced by either a call to clib_crc32c or a call to clib_xxhash, as the result is not used as a check value but as a hash. Change-Id: I3af4d68e2e5ebd0c9b0a6090f848d043cb0f20a2 Signed-off-by: Christophe Fontaine <christophe.fontaine@enea.com>
2017-06-12Fix coverity issueFilip Tehlar1-0/+1
Change-Id: Ib62ee0eacd6c91dc4cd95835efe901079754ef42 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-06-10MPLS: cannot delete a path from the CLINeale Ranns1-13/+25
Change-Id: I7f85870ef99405727312a5de6839c8875c9fa1c5 Signed-off-by: Neale Ranns <nranns@cisco.com>