aboutsummaryrefslogtreecommitdiffstats
path: root/src/vnet
AgeCommit message (Collapse)AuthorFilesLines
2021-11-04ip: reassembly: avoid reading truncated L4 headersKlement Sekera3-81/+151
Check if L4 headers are truncated and if so, set a flag for (future) consumers instead of reading/writing garbage data. Type: fix Fixes: de34c35fc73226943538149fae9dbc5cfbdc6e75 Change-Id: I0b656ec103a11c356b98a6f36cad98536a78d1dc Signed-off-by: Klement Sekera <ksekera@cisco.com>
2021-11-03tcp: make buffer reset function publicFlorin Coras2-32/+28
Also does a bit of code cleanup. Type: refactor Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Ifbff1e03a2e1fdca98925fdd3db7eb230ff24a37
2021-11-03ipsec: Support the single IPSec interface dumpNeale Ranns1-0/+5
Type: fix Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I93c819cdd802f0980a981d1fc5561d65b35d3382
2021-11-02ip: fix coverity warningKlement Sekera1-1/+1
Remove unnecessary NULL check of t0, which causes coverity to scream. t0 is always initilised to *something* by doing pool_elt_at_index(). Type: fix Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: I7cf21767c43a24923e490ad40622743c17142fe2
2021-11-02fib: allow vnet rewrite max size to be smaller the pre_dataBenoît Ganne2-3/+5
There is no reason to enforce vnet rewrite size to be equal to pre_data. Moreover, since vnet rewrite size is now saved as u8, this limits pre_data to 192 bytes. Type: fix Fixes: 7dbf9a1a4fff5c3b20ad972289e49e3f88e82f2d Change-Id: I3f848aa905ea4a794f3b4aa62c929a481261a3f1 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2021-11-02build: remove unnecessary executable bitsRay Kinsella2-0/+0
Run 'find src -executable -type f', remove unnecessary executable bits from the source tree. Type: refactor Signed-off-by: Ray Kinsella <mdr@ashroe.eu> Change-Id: I070e22c8fb2ef8712bc3ea620727ee5ab3d9a9fb
2021-11-02interface: avoid dependency on crc32 for eth handoffFlorin Coras3-21/+32
Make sure the infra works on platforms without crc32, like risc-v Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I5f267497bb4e73a91a5320822ca42388f1f8b037
2021-11-02ip: fix build without vector unitDamjan Marion1-0/+13
Change-Id: I102f84d6d72a7f17e62fb8c16a1d4a3234753476 Type: fix Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-11-02classify: fix build on systems without crc32f and vector unitDamjan Marion1-2/+6
Change-Id: I4229239ed6b81c10362faa1aa9f658c3fccfd31b Type: fix Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-11-02l2: fix outside array bounds errorsDamjan Marion2-2/+2
Reported by gcc-11... Type: fix Change-Id: Ia00001a6334722a6ae9cc771e6861c1f709df286 Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-11-02tcp: fix uninitializad valueDamjan Marion1-1/+1
May not be valid error but gcc-11 complains. Type: fix Change-Id: I207b8b4966c5eadd534495e29c873663249a377f Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-11-02hash: check if crc32c is availableDamjan Marion1-0/+4
Type: fix Change-Id: I2f87ed4b151ecd5034b69d6f060626be6fd74e85 Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-10-31ipsec: silence gcc-11 parentheses warningDamjan Marion1-1/+1
Type: fix This reverts commit 5ecda99d673298e5bf3c906e9bf6682fdcb57d83. Change-Id: I393c7d8a6b32aa4f178d6b6dac025038bbf10fe6 Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-10-31interface: handoff refactor and optimizationsFlorin Coras3-62/+171
- move existing ethernet hash functions to hash infra (no l4 awareness) - refactor code to use hash infra and add apis to request l4 aware hashing functions - hashing functions per interface - code cleanup Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Ia9f44db98d83f0f027aeb37718585a2e10ffd2c6
2021-10-30build: add missing fib headers in packagesBenoît Ganne1-0/+3
Type: fix Fixes: d6953332db225d5355f50348ef3b09f0525d5282 Change-Id: Ib85fee40e71ebe5bc2b84c62e37298b5e390d520 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2021-10-29policer: fix coverity warning/NULL dereferenceKlement Sekera1-2/+10
Add a NULL check in case of hash lookup failure to make coverity happy. Type: fix Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: I3cfa5960458d3618f1277ba442b4ca5ca15064ea
2021-10-29devices: default mode eth in the apiNathan Skrzypczak2-2/+4
Type: fix https://gerrit.fd.io/r/c/vpp/+/34027 added support for l3 mode, but as the eth_mode constant was set to 1 we did default to l3 mode in the api. This reverts to the original logic. Change-Id: If8b90b300d3868de5233dfa1f33ec975853cba11 Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2021-10-28interface: refactor interface output node in different processing levelsMohsin Kazmi1-13/+9
Type: refactor Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com> Change-Id: I4f29e6118630146876b7f58f1afe6b6733401047
2021-10-28ip: improve csum fold on x86_64Damjan Marion1-1/+15
New code seems to be 1.5 clocks faster. old: mov eax,edi shr rdi,0x20 add rdi,rax movzx edx,di shr rdi,0x10 add rdx,rdi movzx eax,dx shr rdx,0x10 add rax,rdx mov rdx,rax shr rdx,0x10 add eax,edx new: mov rax,rdi shr rax,0x20 add eax,edi mov edi,0x10 shrx edi,eax,edi adc ax,di adc ax,0x0 Type: improvement Change-Id: I3c565812c67ff4c3db197a9d4137a6c131b5b66c Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-10-28tap: handle null namespace and bridge correctlyMatthew Smith1-2/+4
Type: fix In tap_create_if(), if args->host_namespace or args->host_bridge are null because no values were set for those, the virtio_if_t entry in virtio_main.interfaces ends up getting populated with values of "(nil)" in net_ns or host_bridge, respectively. Check whether args->host_namespace and args->host_bridge are null before trying to set the corresponding fields on virtio_if_t. Change-Id: I8e1e66a6d7b246e7c66fece406d116ffb1312c64 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2021-10-27devices: fix coverity warning/don't leak fdKlement Sekera1-1/+2
Move socket creation past code which returns from function to avoid leaking the socket in case of an early error return. Type: fix Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: I9e18bd32022441c17ca920d1c2458b058b76c3c0
2021-10-27tcp: fix use of invalid local sw_if_indexFlorin Coras1-1/+2
Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Id58ac44d45fb8b8a0d803f02e0242ec6f4b3db05
2021-10-26crypto: add barrier in crypto key addGabriel Oginski1-0/+12
Originally the pool of keys can be expand and cache with pointer for key can be invalid. For example in Wireguard during handshake process this pool can be expand and pointer for these keys in cache can be invalid for workers or can has incorrect value (poison memory). The fixes add barrier if the pool needs be to expand to ensure that cache in function will be valid and avoid situation when cache has invalid pointer for these keys. Type: fix Signed-off-by: Gabriel Oginski <gabrielx.oginski@intel.com> Change-Id: Ida8f300213dfebb91ecaf1937fb08de81c20ba7b
2021-10-25tcp: fix: TCP timewait port reuse rfc complianceMichal Kalderon2-4/+84
This patch provides a fix for early-kill of timewait sockets that is based on rfc's 1122, 6191. The following commits provided a solution for port re-use. However, they are not fully compliant with rfc 1122 4.2.2.13 ( Closing a connection ) and rfc 6191 (Reducing the TIME-WAIT State Using TCP Timestamps) commit b092b77cf238ba ("tcp: Enable TCP timewait port use") introduced a significant improvement by enabling TCP timewait port re-use. commit ee1cb469b2dd ("tcp: fix port reuse with multiple listeners") fixed usage of the wrong value for connection_index when searching for a listener, by storing the state in tcp.flags. Implementation details: When a SYN is received during time-wait state, the code checks whether all the requirements for accepting the SYN packet are met. If they aren't, the SYN can't be accepted and the packet is dropped, otherwise, connection is deleted and a new connection with same port is opened. Type: fix Signed-off-by: Ofer Heifetz <oferh@marvell.com> Signed-off-by: Yuval Caduri <cyuval@marvell.com> Signed-off-by: Michal Kalderon <mkalderon@marvell.com> Change-Id: I38a33c6e321c760d45ebec9154399e1c90dd0250
2021-10-25bier: Disposition paths don't set the next-hopNeale Ranns1-14/+9
Type: fix Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I3c4152219e5307ac0fe773e16d597f0e4b9a7d4c
2021-10-23arp: fix for source address selectionEd Warnicke1-1/+1
Type: fix Ticket: VPP-1970 Ticket: VPP-1992 Fixes: 9e17887db97bb9f6507270f9fa9923c10816e0df https://gerrit.fd.io/r/c/vpp/+/33495/7 introduced a bug where ND responses are inproperly dropped. This fixes that bug. Signed-off-by: Ed Warnicke <hagbard@gmail.com> Change-Id: Iec4b07646332ced292e2211408c4f7af3088ac28 Signed-off-by: Ed Warnicke <hagbard@gmail.com>
2021-10-22devices: add support for l3 af_packet interfaceMohsin Kazmi5-37/+106
Type: improvement Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com> Change-Id: Ia6b9d4ac55be2216887bfdb99be4021f6a96f166
2021-10-22ipsec: add api test fileFilip Tehlar2-0/+598
Type: improvement Signed-off-by: Filip Tehlar <ftehlar@cisco.com> Change-Id: Ib3fe4f306f23541a01246b74ad0f1a7074fa03bb
2021-10-22fib: Don't back walk from a path-list when a child fist attaches.Neale Ranns1-11/+7
Type: fix If the walk is triggered when the child is added, then that child is visited in the walk. However, since it is just attahcing to the path-list it may not, or indeed cannot, have all the context it needs to successfully handle the walk. In the case of MPLS tunnel, it does not have the path extensions ready, and cannot since the path extensions need to resolve on the path-list. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I027af8cf2f522d2f6e37931bea60c767f0cb667d
2021-10-21fib: respect mfib entry flags on create with pathsPaul Atkins10-27/+37
When an mfib entry was created with both paths and entry_flags then the entry flags were being ignored. If there are no paths then the flags were passed into mfib_table_entry_update, but in the case where the entry didn't exist and there were paths and flags, the entry was created within mfib_table_entry_paths_update() which used a default of MFIB_ENTRY_FLAG_NONE. Pass the flags through into the mfib_table_entry_paths_update fn. All existing callers other than the create case will now pass in MFIB_ENTRY_FLAG_NONE. Type: fix Signed-off-by: Paul Atkins <patkins@graphiant.com> Change-Id: I256375ba2fa863a62a88474ce1ea6bf2accdd456
2021-10-21ip: Add ip46-local node for local swif[rx]Nathan Skrzypczak5-44/+132
Type: improvement This adds a new ip[46]-receive node, sibling of ip[46]-local. Its goal is to set vnet_buffer (b)->ip.rx_sw_if_index to the sw_if_index of the local interface. In dependant nodes further down the line (e.g. hoststack) we then set sw_if_idx[rx] to this value. So that we know which local interface did receive the packet. The TCP issue this fixes is that : On accepts, we were setting tc->sw_if_index to the source sw_if_index. We should use the dest sw_if_index, so that packets coming back on this connection have the right source sw_if_index. And also setting it in the tx-ed packet. Change-Id: I569ed673e15c21e71f365c3ad45439b05bd14a9f Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2021-10-21l2: add api test fileFilip Tehlar2-0/+1419
Type: improvement Signed-off-by: Filip Tehlar <ftehlar@cisco.com> Change-Id: Ie79a2deac03c04c0697e482a649ff151142126ed
2021-10-21ip6: set local flag on outbound echo replyMatthew Smith1-0/+4
Type: fix When VPP generates an ICMP echo reply in response to an incoming echo request to a local address, set VNET_BUFFER_F_LOCALLY_ORIGINATED on the buffer. It will prevent ip6-rewrite from decrementing the hop limit. Outbound IPv4 echo replies also get this flag set. Change-Id: Iaa229294eb158edb58cf1bf1b7a90da281321406 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2021-10-21session: add api test fileFilip Tehlar2-0/+364
Type: improvement Signed-off-by: Filip Tehlar <ftehlar@cisco.com> Change-Id: I6b89c4158d10d4928c8418312180dbeba7d70ab2
2021-10-20ip6: fix IPv6 address calculation error using "ip route add" CLIJieqiang Wang3-20/+61
Using VPP CLI "ip route add" to add static IPv6 entries outputs wrong results. Fix this error by correctly calculating IPv6 addresses with different increased ranges and grouping ip4/ip6 prefix calculation functionality into two functions. Type: fix Signed-off-by: Jieqiang Wang <jieqiang.wang@arm.com> Reviewed-by: Lijian Zhang <lijian.zhang@arm.com> Reviewed-by: Tianyu Li <tianyu.li@arm.com> Change-Id: If954876301ca2095f9331799a086f75db936f246
2021-10-20gso: add support for gso perf unittestMohsin Kazmi2-0/+13
Type: test Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com> Change-Id: I5d44a6ea24e4aa0842024a0961f1fb22c6e6419a
2021-10-19bfd: fix bfd_key_id updateAlexander Skorichenko1-4/+8
Type: fix Currently, auth activation CLI command "bfd upd session auth activate ... conf-key-id <cki> bfd-key-id <bki>" allows to change both key-ids to new values at once. But if only bfd-key-id should be corrected, e.g. as a result of mistyping, we can't do that in a single operation, and have to deactivate auth first and then reactivate it with a correctly entered pair of ids. Currently, backend's bfd_auth_activate() function returns immediately, with no action, if it finds that submitted conf-key-id matches the current record. No check on bfd-key-id value is made. With this fix, bfd_auth_activate() checks if session's bfd-key-id has to be changed to a new value, and if so, it updates and logs appropriately. Change-Id: I3b915a936cb1721707860bb503f70e7dd29e0ddd Signed-off-by: Alexander Skorichenko <askorichenko@netgate.com>
2021-10-19bfd: fix desired_min_tx_nsec updateAlexander Skorichenko1-0/+2
Type: fix Currently, the change in desired_min_tx value initiated locally doesn't result in actual update of the transmission interval. bfd_session_t structure has two fields for each of protocol's local time parameters desired_min_tx, required_min_rx In a case of a parameter update, "config_" prefixed fields store new values sent to remote bs.config_desired_min_tx_nsec, bs.config_required_min_rx_nsec Those prefixed "effective_", keep old values, still in charge, until new ones are being negotiated between peers: bs.effective_desired_min_tx_nsec, bs.effective_required_min_rx_nsec Currently, upon termination of the Poll Sequence (negotiation) only bfd_set_effective_required_min_rx() is called to update effective RX value. TX value remains unchanged. With this fix, add a call to bfd_set_effective_desired_min_tx() to set new, acknowledged TX value in effect. Signed-off-by: Alexander Skorichenko <askorichenko@netgate.com> Change-Id: I80b6746533839c9572598f1ad9dabb33e621a525
2021-10-18api: remove legacy pd msg handlersKlement Sekera2-2/+0
While looking at a coverity warning it was discovered that it's caused by return value modified by pd msg handlers. As these are legacy, it's a good time to remove them and also fix the warning this way. Type: fix Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: Ic72ab8b2b7a2e55188d1c31cfd18a74b7cf82c43
2021-10-18interface: add api test fileFilip Tehlar3-15/+1179
Type: improvement Signed-off-by: Filip Tehlar <ftehlar@cisco.com> Change-Id: Ib07029204ecf12bf2adb5a39afa54bc98fb81f34
2021-10-16interface: fix offload flag checkNathan Skrzypczak1-1/+4
We should compute offloads in interface_ouput.c in the case when any of the UDP, TCP or IP offload flags is not present in the interface capabilities. e.g. if the interface supports IP cksum offload but not tcp/udp we should still compute cksums here. Type: fix Change-Id: Ibaa3a56dbc92938dca45311c38f079d040052194 Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2021-10-14ip6-nd: fix coverity warningKlement Sekera1-0/+4
Add a missing return statement in case there are no parameters supplied to 'set ip6 nd proxy' CLI to avoid calling code with uninitialised parameters. Type: fix Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: Ie4fdb4df5d1af49471c421e5e7a6c2f885d2e8d2
2021-10-13docs: convert vpp doc md->rstNathan Skrzypczak20-1268/+1708
Type: improvement Change-Id: If453321785b04f9c16e8cea36fb1910efaeb2c59 Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2021-10-13session: app name should format with %vXiaoming Jiang1-1/+1
Type: fix Signed-off-by: Xiaoming Jiang <jiangxiaoming@outlook.com> Change-Id: I2c77066cc9f1d3063373cc9559cc5b369906cc24
2021-10-13interface: handle error during admin-up correctlyMatthew Smith1-3/+0
Type: fix In vnet_sw_interface_set_flags_helper(), the variable old_flags is set to the original value of vnet_sw_interface_t.flags for an interface. If an error occurs during the process of bringing an interface up, old_flags is used to restore the original value. Before the dev class or hw class admin_up_down_function can be called, but after modifying vnet_sw_interface_t.flags to it's new value, old_flags is set to the value of vnet_sw_interface_t.flags a second time. This discards the original flags that were being preserved. As a result, if an interface is being brought up and the dev class or hw class function fails, at the end VPP believes that interface is up. This can cause a crash if packets are routed through the interface and some RX/TX initialization was not completed because of the error while bringing the interface up. Change-Id: Ica6b6bac13c24e88c4136bf084cd392e6217e7d9 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2021-10-12fib: fix the drop counter for ipv6 RPF failuresNeale Ranns2-24/+30
Type: fix the only change to the mfib forwarding node is to set the error code, the rest is checkstyle formatting. The traces previously showed some bogus reason: 00:04:27:325550: ip6-mfib-forward-rpf entry 10 itf -1 flags 00:04:27:325551: ip6-drop fib:0 adj:10 flow:0 UDP: fe80::b203:eaff:fe02:604 -> ff02::1:2 tos 0x00, flow label 0x651ed, hop limit 1, payload length 64 UDP: 546 -> 547 length 64, checksum 0xec9a 00:04:27:325551: error-drop rx:GigabitEthernet6/0/0 00:04:27:325553: drop ip6-input: drops due to concurrent reassemblies limit Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I294684c36edc346b4ebdd83ba66888b3b2197704
2021-10-12ipsec: Performance improvement of ipsec4_output_node using flow cacheGovindarajan Mohandoss7-17/+264
Adding flow cache support to improve outbound IPv4/IPSec SPD lookup performance. Details about flow cache: Mechanism: 1. First packet of a flow will undergo linear search in SPD table. Once a policy match is found, a new entry will be added into the flow cache. From 2nd packet onwards, the policy lookup will happen in flow cache. 2. The flow cache is implemented using bihash without collision handling. This will avoid the logic to age out or recycle the old flows in flow cache. Whenever a collision occurs, old entry will be overwritten by the new entry. Worst case is when all the 256 packets in a batch result in collision and fall back to linear search. Average and best case will be O(1). 3. The size of flow cache is fixed and decided based on the number of flows to be supported. The default is set to 1 million flows. This can be made as a configurable option as a next step. 4. Whenever a SPD rule is added/deleted by the control plane, the flow cache entries will be completely deleted (reset) in the control plane. The assumption here is that SPD rule add/del is not a frequent operation from control plane. Flow cache reset is done, by putting the data plane in fall back mode, to bypass flow cache and do linear search till the SPD rule add/delete operation is complete. Once the rule is successfully added/deleted, the data plane will be allowed to make use of the flow cache. The flow cache will be reset only after flushing out the inflight packets from all the worker cores using vlib_worker_wait_one_loop(). Details about bihash usage: 1. A new bihash template (16_8) is added to support IPv4 5 tuple. BIHASH_KVP_PER_PAGE and BIHASH_KVP_AT_BUCKET_LEVEL are set to 1 in the new template. It means only one KVP is supported per bucket. 2. Collision handling is avoided by calling BV (clib_bihash_add_or_overwrite_stale) function. Through the stale callback function pointer, the KVP entry will be overwritten during collision. 3. Flow cache reset is done using BV (clib_bihash_foreach_key_value_pair) function. Through the callback function pointer, the KVP value is reset to ~0ULL. MRR performance numbers with 1 core, 1 ESP Tunnel, null-encrypt, 64B for different SPD policy matching indices: SPD Policy index : 1 10 100 1000 Throughput : MPPS/MPPS MPPS/MPPS MPPS/MPPS KPPS/MPPS (Baseline/Optimized) ARM Neoverse N1 : 5.2/4.84 4.55/4.84 2.11/4.84 329.5/4.84 ARM TX2 : 2.81/2.6 2.51/2.6 1.27/2.6 176.62/2.6 INTEL SKX : 4.93/4.48 4.29/4.46 2.05/4.48 336.79/4.47 Next Steps: Following can be made as a configurable option through startup conf at IPSec level: 1. Enable/Disable Flow cache. 2. Bihash configuration like number of buckets and memory size. 3. Dual/Quad loop unroll can be applied around bihash to further improve the performance. 4. The same flow cache logic can be applied for IPv6 as well as in IPSec inbound direction. A deeper and wider flow cache using bihash_40_8 can replace existing bihash_16_8, to make it common for both IPv4 and IPv6 in both outbound and inbound directions. Following changes are made based on the review comments: 1. ON/OFF flow cache through startup conf. Default: OFF 2. Flow cache stale entry detection using epoch counter. 3. Avoid host order endianness conversion during flow cache lookup. 4. Move IPSec startup conf to a common file. 5. Added SPD flow cache unit test case 6. Replaced bihash with vectors to implement flow cache. 7. ipsec_add_del_policy API is not mpsafe. Cleaned up inflight packets check in control plane. Type: improvement Signed-off-by: mgovind <govindarajan.Mohandoss@arm.com> Signed-off-by: Zachary Leaf <zachary.leaf@arm.com> Tested-by: Jieqiang Wang <jieqiang.wang@arm.com> Change-Id: I62b4d6625fbc6caf292427a5d2046aa5672b2006
2021-10-12session: set actual lcl ip on accepted ctFlorin Coras1-1/+1
Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Ic2ba5fa234a394acb524b61573fc49f2d58c2dea
2021-10-11ip: fix fib and mfib locksNathan Skrzypczak9-84/+92
This patches fixes an issue that could cause fib locks to underflow: if an API user deletes a fib and quickly recreates it, the fib may not have been actually deleted. As a result, the lock would not be incremented on the create call leading to the fib potentially disappearing afterwards - or to the lock to underflow when the fib is deleted again. In order to keep the existing API semantics, we use the locks with API and CLI source as flags. This means we need to use a different counter for the interface-related locks. This also prevents an issue where an interface being bound to a vrf via API and released via CLI could mess up the lock counter. Finally, this will help with cleaning up the interface-related locks on interface deletion in a later patch. Type: fix Change-Id: I93030a7660646d6dd179ddf27fe4e708aa11b90e Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com> Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
2021-10-11docs: nitfixes in FEATURE.yamlNathan Skrzypczak2-2/+2
Type: improvement Change-Id: Iec585880085b12b08594a0640822cd831455d594 Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>