Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: feature
A device/router needs to have a unique ID which is included in the flow
has so that flows are not polarised through the network, i.e. each deice
in the network chooses the same nth link for the same flow.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I963e03674adbb085902b4084fdc4886b88f5734c
|
|
The check args->hwaddr is always true and it always copies the
mac address from args->hwaddr even though none was set.
Check args->use_custom_mac instead.
Type: fix
Fixes: gerrit 29970
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I0c51bf1ea79b02c4fbdc3c52e694f186bdd96600
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I6db15780d87426eee852aa020c50cbdf45dc1f95
|
|
Change-Id: I85a463b4ca15baf11e3eb70189f5190ba2585170
Type: refactor
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
|
|
Add separate queue implementation for the message queue as it's custom
tailored for fifo segments as opposed to binary api.
Also move eventfds to the private data structures.
Type: refactor
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I6df0c824ecd94c7904516373f92a9fffc6b04736
|
|
Propagate the multi-arch variant selection to interfaces.
Type: fix
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Change-Id: I99c4a7896f172f0d14d2ded22a27383825529a7d
|
|
We have accumulated several scenarios in prod or wishlists
where it would be useful to have a general infra to say yes/no
about a certain test, and potentially make decisions based on that,
for example:
- runs solo (aka 'time-dependent')
- (wishlist) part of quick smoke-test set
- (wishlist) intermittent failure unrelated to timing
- (wishlist) test broken with a multi-worker config in vpp
Refactor the current "run-solo" code to allow for this extension.
Type: test
Change-Id: Ia5b3810e57c0543753c8e0dc4dc0cfb4a30b36ac
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: Ic977ffe761efc2129c61aec581da5479fe4838da
Type: fix
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
|
|
Change-Id: I03e164d8d5a329497f422e99f8b0058135241b4e
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
Type: fix
|
|
Change-Id: If8077280cef501599f810ad9255efa2a5a451ced
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
Type: improvement
|
|
Take into account pending interrupts when resizing rxq_interrupts
Type: fix
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
Change-Id: I64f6f4404738c90ed5a2c10d72c7ce59cf96a644
|
|
Type: improvement
Signed-off-by: Jakub Horn <jhorn@cisco.com>
Change-Id: I06401a8645615d139893dca27d07bb3b3214bea7
|
|
Type: fix
Change-Id: If35cf7da0c3d1b92532cc2e45c164d6b5a08592c
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: improvement
Change-Id: I4008cadfd5141f921afbdc09a3ebcd1dcf88eb29
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: refactor
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Ice2bc42838e6d5ba579f449c3f8b0feffebeb719
|
|
extends ip6_compute_flow_hash() to include IPv6 flowlabel in flowhash computation
Type: improvement
Signed-off-by: Ahmed Abdelsalam <ahabdels@cisco.com>
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Change-Id: Id1aaa20c9dac729c22b714eea1cdd6e9e4d1f75e
|
|
Type: fix
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Ib08fe356e4dc710dd60a96736c48b27129f06786
|
|
Type: fix
this means we 1) don't decrement TTL and (for v6) can fragment.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I0f718da7dcaba834ad495ae9242a9a58c9e7c184
|
|
Type: fix
Change-Id: Ib23f823e46494f80d9d857ddde88f4939bf2b3d1
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
When building with musl, the type `uint` is not available unless you
include <sys/types.h>.
Signed-off-by: Nathan Moos <nmoos@cisco.com>
Change-Id: I0003b0c373d9fd532b4135c43d78f36d6cd7afa4
|
|
Type: fix
Replace vnet_register_interface with ethernet_register_interface
Fixes https://jira.fd.io/browse/VPP-1962
Signed-off-by: Ed Warnicke <hagbard@gmail.com>
Change-Id: I5f578fc416605429fe1e2b510ad49eb754451d40
Signed-off-by: Ed Warnicke <hagbard@gmail.com>
|
|
Type: feature
Change-Id: I5739869490155b0b9674b4faf61882d97e66a4ed
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
vnet_crypto_is_set_handler() was checking if op handler is set by
using alg instead of op id.
This fix changes the check to use op ids from crypto_main's alg_data
for provided alg.
Signed-off-by: PiotrX Kleski <piotrx.kleski@intel.com>
Change-Id: I5f0f00a889ddada44d9912af175ebad66677037a
|
|
one cache line
Type: refactor
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Change-Id: I54128ba62f8dcc87c1845b33ed3637112d42a891
|
|
If classify pcap filter was never configured, typing the delete
command causes a crash. The reason is
cm->classify_table_index_by_sw_if_index not yet allocated.
The fix is to add a check before we access the vector.
Type: fix
Fixes: gerrit 28475
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: Ia33bd91fa82d8ffc4490d4069155980a6e233268
|
|
This change introduces flow concept to endpoint-dependent NAT. Instead
of having a session and a plethora of special cases in code for e.g.
hairpinning, twice-nat and others, figure all this out and store it in
flow logic. Every flow has a match and a rewrite part. This unifies all
the NAT packet processing cases into one - match a flow and rewrite the
packet based on that flow. It also provides a cure for hairpinning
dilemma where one part of the flow is on one worker and another on
a different one. These cases are also sped up by not requiring
destination adress lookup every single time to be able to rewrite source
nat as this is now part of flow rewrite logic.
Type: improvement
Change-Id: Ib60c992e16792ea4d4129bc10202ebb99a73b5be
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: feature
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I89dc3815eabfee135cd5b3c910dea5e2e2ef1333
|
|
Don't assume that half-open connections pending removal are always
successful.
Type: fix
Signed-off-by: Ivan Shvedunov <ivan4th@gmail.com>
Change-Id: I955077a4ed2389b9ee38d97e27a7c7761c860a4a
|
|
Type: docs
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I3dfde4520a48c945ca9707accabbe1735c1a8799
|
|
Type: fix
If a tunnel's source is not local then post encap VPP will attempt to
receive (via ip4-local) that packet, things go wrong from there.
The fix is when stacking the encap forwarding don't accept a receive
DPO. This approach is taken, rather than rejecting bad tunnels, because
the 'local-ness' of the tunnel's source can change and we can't reject
tunnels that were once correctly configured but are no longer.
the user will quickly discover their mistake as traffic won't pass.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I46198422e321606e8baba003112e978a526b4c2f
|
|
Minor fixes for Intel AVX-512 alignment, and cache update.
Type: fix
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Change-Id: I9f9bebb4ecb3265ffc765affd1ed94d0ba979066
|
|
Allocate and attach a new pair of private fifos in the right private
slice when a session is cloned. This ensures that private fifos are not
shared between workers.
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ib700d18104d2ca79aa8a07434cdcdcab0bef13a5
|
|
want_l2_macs_events
Type: feature
Signed-off-by: Jerome Tollet <jtollet@cisco.com>
Change-Id: I6de6dae7da4ec1001e2811975a9b67acfc1a148c
|
|
- Refactor make test code to be co-located with
the vpp feature source code.
Type: test
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I056717261553f6449f5fcd3611b6ae3895a00ba6
|
|
VPP only supports a poor man's approach for interrupt notification to the
driver. It uses a simple binary flag for "interrupt needed" or "interrupt
not needed". Most drivers support more sophisticated event index already.
This feature is to add the long due missing feature and make it configurable,
off by default.
Type: feature
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I68dab7dd07045cafb49af97b7f70db9b8131ae03
|
|
Remove the deprecated tls apis.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ia1e12bd813671146f0aca22e83d04c23ac13e595
|
|
Type: feature
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Ief1755131297afcaa14fe74fd8dd28c71a92fbe6
|
|
Type: fix
it's been 2 releases since it was marked deprecated.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I0eba7ed607826ed0d00e7d2d8f9b27d09e8e9a6e
|
|
Type: fix
I should have done this wehn i marked the request as deprecated. The
reply also needs to be marked deprecated so the API compliance script
can remove it along with the request.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I8391257944b6cff7b32a01a479dd1dcab30cd33b
|
|
Type: feature
Signed-off-by: Jerome Tollet <jtollet@cisco.com>
Change-Id: I57ed6699050445d9c9aec98eff3aab56735aca54
Signed-off-by: Jerome Tollet <jtollet@cisco.com>
|
|
Type: fix
Fixes: 587f9130424fd451e4ba823240d02f655fb197d1
Change-Id: Ia1739fad6a36fa658aece157d7adea8bbaa751d2
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: fix
Change-Id: I84388bd8b68e8c48a4f44d7ecf7aadec2408b717
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: fix
Signed-off-by: yedonggang <yedg@wangsu.com>
Change-Id: Icc3681b591e6deb93c3ff1fda5f9471fa3c96cc6
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I7b2fd896dfa6df46916f46327975b95561809f00
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I1658a9c19d8eae4c9a42c0a111d4ad343b8eb8a4
|
|
Type: feature
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ic373cd2c11272da539eb4b0db27227f36f2f9688
|
|
Type: refactor
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I63a44e11322f6fe27255820524e022f6d710b083
|
|
Add descriptions to clib_file_t template structures so that
sockets can be identified via the 'show unix file' cli command.
Type: fix
Change-Id: Ibf82d55aa6c7b1126bd252b76d0dc8b7076f5046
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: fix
shallow was the default, but probably by accident as it depended on
module load order.
full assembly is the v4 behaviour.
using proper types allows gdb to print enum names.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: If157c5b83614c7adbd7a15a8227a68f8caf4e92c
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Current vhost multi-queues support has a hard limit of 8 queue pairs
due to static vring array. This limit was raised in qemu. VPP should
support more than 8 queue pairs also.
Change static vring allocation to dynamic. When the interface is
created, we allocate 8 queue pairs to begin with. We also keep track
of how many queue pairs that the interface actually uses.
We reply VHOST_USER_GET_QUEUE_NUM with 128 as our maximum number of
support queue pair. When qemu starts initializing queue pair greater
than 8, we expand the vrings as needed on demand.
Type: improvement
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I4a02d987d52d1bbe601b00e71f650fe6ebfcc0d7
|