Age | Commit message (Collapse) | Author | Files | Lines |
|
Change-Id: I379150a88f2d53d6281be41e8bad6fc4f4e88a71
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: I008a4d7ad7160d1f07e7ceef712a5318a9368308
Signed-off-by: Andrey "Zed" Zaikin <zed.0xff@gmail.com>
|
|
Change-Id: Ic04f419b9c09be34afc390e672793180d56c4665
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
update the GBP plugin to implement the full NAT feature set of opflex agent
Change-Id: Ic06a039c889445ed0b9087fa1f292634192b0f8d
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: I3e670c22b3b8a674c98ff30eb093c5c6ab873e53
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I994649761fe2e66e12ae0e49a84fb1d0a966ddfb
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Iedc6bbaa1c0a1c3c6e1b8ed6d67db28046a551f4
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Adopt nova naming convention for vhost-user interfaces.
Change-Id: If70f0828106bf594eb11d4f0ed2898a35ec0af15
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I3700fc1d140e30da783e41762670618f0298c7db
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Use device-input and interface-output feautre arcs to collect unicast, multicast
and broadcast states for RX and TX resp. Since these feature arcs are present only
for 'physical' interfaces (i.e. not su-interfaces) counter collection is supported
only on parent interface types.
Change-Id: I915c235e336b0fc3a3c3de918f95dd674e4e0e4e
Signed-off-by: Neale Ranns <nranns@cisco.com>
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I5695d51dd4f6daff472877fe1cce3ddcb924b187
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I4851b2245f81bcf3cf5f40909c4d158a51af7068
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: I0245263b212142858d3305b0f365d8342912dbb9
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I57b2ec35d9629fb5336c1ccfa4c6c849df118f7b
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I6fdb9e7b718c696f7352541f90026cf60f11338f
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I667b9ccabe54c8f9cff5b1a2e63864965f5064f5
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I8f6fdbbeef2ac7e9fe5d87490ae5cba6e9a0b294
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
This commit also fixes the acl and arp handle for
inspector to view internal state of VOM.
Change-Id: Ibc8ff6cb51d2a77b4c04993ac7212564b8892337
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I38904dafb4110322ec0138f7a5b3a65c96426b2b
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: Iee1574d1f0f081ccc4a90fd9825a0b5e254aa642
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
It:
1. changes ethertype_rule_t to hold actual objects instead of
reference to them.
2. fixes acl_ethertype 'update' function
3. fixes pretty-print of acl-list-update.
4. adds l3-acl update unit test.
Change-Id: Iec72212806e96bd0574b46b563de79f0744cb248
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Typo mistake broken the makefile which results in missing
vom headers in system.
Change-Id: Ic2e5f742f0e38140559138b4aa7564f8c25b73e4
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I1384d16deb3fa38b988dd2fc98f436124e381536
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: I2b572ebd4b7bb26381f127912a4cc0825c04fc34
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Group Base Policy (GBP) defines:
- endpoints: typically a VM or container that is connected to the
virtual switch/router (i.e. to VPP)
- endpoint-group: (EPG) a collection of endpoints
- policy: rules determining which traffic can pass between EPGs a.k.a
a 'contract'
Here, policy is implemented via an ACL.
EPG classification for transit packets is determined by:
- source EPG: from the packet's input interface
- destination EPG: from the packet's destination IP address.
Change-Id: I7b983844826b5fc3d49e21353ebda9df9b224e25
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: I5b7117f3568e3ba979baa15521b2cfc180abb682
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
DISCOVER message sent.
According to RFC2131:
In the case of a client using DHCP for initial configuration (before
the client's TCP/IP software has been completely configured), DHCP
requires creative use of the client's TCP/IP software and liberal
interpretation of RFC 1122. The TCP/IP software SHOULD accept and
forward to the IP layer any IP packets delivered to the client's
hardware address before the IP address is configured; DHCP servers
and BOOTP relay agents may not be able to deliver DHCP messages to
clients that cannot accept hardware unicast datagrams before the
TCP/IP software is configured.
To work around some clients that cannot accept IP unicast datagrams
before the TCP/IP software is configured as discussed in the previous
paragraph, DHCP uses the 'flags' field [21]. The leftmost bit is
defined as the BROADCAST (B) flag. The semantics of this flag are
discussed in section 4.1 of this document. The remaining bits of the
flags field are reserved for future use. They MUST be set to zero by
clients and ignored by servers and relay agents. Figure 2 gives the
format of the 'flags' field.
this changes means VPP conforms to the:
"SHOULD accept and forward to the IP layer any IP packets delivered
to the client's hardware address before the IP address is configured"
with the caveat that VPP allows DHCP packets destined to the stanard client
DHCP port to be delivered. With this enhancement the control-plane is now
able to choose the setting of the broadcast flag.
Change-Id: Ia4eb2c9bb1e30c29f9192facc645e9533641955a
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I5f105a1abb8a28645d6c961ad92f91c23787047f
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I91892084133daadb74caa7aa13ee1071599ba892
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I2dd5dbafe36e5ae536b3e600beb6920a71238b7a
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I55d9953851062f7106c66701d46bcd9073cf1ee4
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
This reverts commit 4363ad6c96b5641fca1b16c5a6ec22e2364adcfd.
Change-Id: Ie71ee265659e06ada37f40cfceed4c20b1cbf6e5
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
override the default CXXFLAGS (which provides a -O2) with the
system set CFLAGS (providing -O0/-O2 for debug/release builds)
Change-Id: Ic84e51baafdc22d37139303566d705d759e36721
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
- rename l2_bridged to is_dvr. Including on the ip.api
this was new in the 18.01 release so no compatability issues.
- steal the free space in vnet_buffer_opaque_t for use with flags.
- run the ipX-output feature arc from the DVR DPO
Change-Id: I040e5976d1dbe076fcdda3a40a7804f56337ce3f
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ic55ad2e0a1435f552ce84ed1a9b1981191bc178b
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I112afaa1f2ccd2ee62a436c73802afaea9b44779
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
L2 Emulation is a feautre that is applied to L2 ports to 'extract'
IP packets from the L2 path and inject them into the L3 path (i.e.
into the appropriate ip[4|6]_input node).
L3 routes in the table_id for that interface should then be configured
as DVR routes, therefore the forwarded packet has the L2 header
preserved and togehter the L3 routed system behaves like an L2 bridge.
Change-Id: I8effd7e2f4c67ee277b73c7bc79aa3e5a3e34d03
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
New constructor can construct the l3 rule
using all or partial paratmeters.
Change-Id: I828ec1c4713decb5824e4a73c3692cebc2324cc2
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I341f522b46dd85fb3b1dd43fd125513f16f89171
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I4c22ad08bf8fa3e8f05b8938ff447cafa4eea5b2
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: If14d1b2d9b73de77321d94f10d48fa1bb04846f6
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I4fbf4a574f455628d56e78cefc1a76adc06bc801
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: I03d7508649e80a538fcf9541815e2c29224bc87a
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I14c838ee99f9bc2db66bb2e775039d2cb2e7924f
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
logging: allow a client to register a callback handler to recieve log messages
that way the client can maintain a correctly sequenced log
populate: fix the creation of interface and the setting of the handle
stats: the reset promise idea is not defined behaviour.
Use an eanble/disable command pair
Change-Id: I347720bb65df2874c7619e722d593bc863ee2bf1
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: I0c5e198049d510f3b3f9a6aefe49c315449768e3
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: I2e8743d70a8d8604d370218a73d5f37c2f7c4617
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
- find object by key
- compare objects
Change-Id: I36ec8612be9482bcef7ceced2a59f7403f77b3e8
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: Id8b159dd72b92798538a32fe570fb0038d742ef2
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I5e3fa5e098a8ea26dbc3d3a1dc064e3507e33d8e
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|