Age | Commit message (Collapse) | Author | Files | Lines |
|
Adopt nova naming convention for vhost-user interfaces.
Change-Id: If70f0828106bf594eb11d4f0ed2898a35ec0af15
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I3700fc1d140e30da783e41762670618f0298c7db
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Use device-input and interface-output feautre arcs to collect unicast, multicast
and broadcast states for RX and TX resp. Since these feature arcs are present only
for 'physical' interfaces (i.e. not su-interfaces) counter collection is supported
only on parent interface types.
Change-Id: I915c235e336b0fc3a3c3de918f95dd674e4e0e4e
Signed-off-by: Neale Ranns <nranns@cisco.com>
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I5695d51dd4f6daff472877fe1cce3ddcb924b187
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I4851b2245f81bcf3cf5f40909c4d158a51af7068
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: I0245263b212142858d3305b0f365d8342912dbb9
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I57b2ec35d9629fb5336c1ccfa4c6c849df118f7b
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I6fdb9e7b718c696f7352541f90026cf60f11338f
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I667b9ccabe54c8f9cff5b1a2e63864965f5064f5
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I8f6fdbbeef2ac7e9fe5d87490ae5cba6e9a0b294
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
The previous use of a dictionary instead of a list led to typedefs being generated in wrong order.
Change-Id: Iee6ff73f920883ce6e599180c1b47fe997c1702e
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
This commit also fixes the acl and arp handle for
inspector to view internal state of VOM.
Change-Id: Ibc8ff6cb51d2a77b4c04993ac7212564b8892337
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Based on https://gerrit.fd.io/r/#/c/10920/
Updates service definition in stats.api with correct reply message names.
Change-Id: I3282bee5304e667e23bc1fab3f43d967a50d880d
Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
|
|
This reverts commit f7b7fa53b7eaec81d8c00c1023fb7d01f1f9761f.
Change-Id: I87496342943248e94f01ada31459f387c0a3a610
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: I7de987c30b263d43521e6280c5273f30b5f6e11c
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
The 'vpp-api/java' includes 'core' subdir which should be tracked.
This patch adds .gitignore for 'vpp-api/java'
to negate pattern that matches 'core' files/dirs,
introduced by https://gerrit.fd.io/r/#/c/9848/.
Change-Id: I4e10ca10a891a2d95d6b45e479ee8d2196749132
Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
|
|
Introduces JSON parser which builds object model of Java API.
Also rewrites JNI translation of typedefs
to use per type translation functions
instead of code inlining.
Not covered:
- integrate with vappigen plugin (VPP-1154) or vapi parser (VPP-1155)
- use better templating engine (VPP-480)
- improvements of generator structure (e.g. VPP-1186)
Change-Id: I9e12d76c2f3c6ee041669f58e8a37917f656aa90
Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
|
|
Change-Id: I15cf4a9fd2d2518df4bfffc1ba3c556a87ca5afa
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: I38904dafb4110322ec0138f7a5b3a65c96426b2b
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I25cbf947d6aabadbf637387497104cb301762def
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: Iee1574d1f0f081ccc4a90fd9825a0b5e254aa642
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
It:
1. changes ethertype_rule_t to hold actual objects instead of
reference to them.
2. fixes acl_ethertype 'update' function
3. fixes pretty-print of acl-list-update.
4. adds l3-acl update unit test.
Change-Id: Iec72212806e96bd0574b46b563de79f0744cb248
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
This allows VPP to define APIs which conflict with internal
function names used in vpp_papi without issues.
Change-Id: I56c21814e1c11fa2aa6bcd95adb3fdeacd304e8e
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
This changes makes unused VPP objects collectable by garbage collector,
allowing running all `make test` tests again instead of python crashing
due to running out of memory.
Change-Id: I0e271c2b3f195d9d3b64840f9f11144da0fe967d
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Typo mistake broken the makefile which results in missing
vom headers in system.
Change-Id: Ic2e5f742f0e38140559138b4aa7564f8c25b73e4
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I1384d16deb3fa38b988dd2fc98f436124e381536
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: I2b572ebd4b7bb26381f127912a4cc0825c04fc34
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Group Base Policy (GBP) defines:
- endpoints: typically a VM or container that is connected to the
virtual switch/router (i.e. to VPP)
- endpoint-group: (EPG) a collection of endpoints
- policy: rules determining which traffic can pass between EPGs a.k.a
a 'contract'
Here, policy is implemented via an ACL.
EPG classification for transit packets is determined by:
- source EPG: from the packet's input interface
- destination EPG: from the packet's destination IP address.
Change-Id: I7b983844826b5fc3d49e21353ebda9df9b224e25
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: I5b7117f3568e3ba979baa15521b2cfc180abb682
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Adding enum support (VPP-1153) requires
JVPP generator refactoring
(see: VPP-1154, VPP-1155, VPP-480)
As a workaround we just update all the mappings
used for VPP API definitions to JAVA and C/JNI translation.
Change-Id: I9dff83e5199039a1a46a3d4685ce57cdeeeb2014
Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
|
|
Change-Id: Iec437e4672af1f0d1a24458afb977ba6fbeba4ed
Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
|
|
Change-Id: I54c147004fd93681a6a9cf30fa5277c1dabce67c
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
DISCOVER message sent.
According to RFC2131:
In the case of a client using DHCP for initial configuration (before
the client's TCP/IP software has been completely configured), DHCP
requires creative use of the client's TCP/IP software and liberal
interpretation of RFC 1122. The TCP/IP software SHOULD accept and
forward to the IP layer any IP packets delivered to the client's
hardware address before the IP address is configured; DHCP servers
and BOOTP relay agents may not be able to deliver DHCP messages to
clients that cannot accept hardware unicast datagrams before the
TCP/IP software is configured.
To work around some clients that cannot accept IP unicast datagrams
before the TCP/IP software is configured as discussed in the previous
paragraph, DHCP uses the 'flags' field [21]. The leftmost bit is
defined as the BROADCAST (B) flag. The semantics of this flag are
discussed in section 4.1 of this document. The remaining bits of the
flags field are reserved for future use. They MUST be set to zero by
clients and ignored by servers and relay agents. Figure 2 gives the
format of the 'flags' field.
this changes means VPP conforms to the:
"SHOULD accept and forward to the IP layer any IP packets delivered
to the client's hardware address before the IP address is configured"
with the caveat that VPP allows DHCP packets destined to the stanard client
DHCP port to be delivered. With this enhancement the control-plane is now
able to choose the setting of the broadcast flag.
Change-Id: Ia4eb2c9bb1e30c29f9192facc645e9533641955a
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
This is a version of the VPP API generator in Python PLY. It supports
the existing language, and has a plugin architecture for generators.
Currently C and JSON are supported.
Changes:
- vl_api_version to option version = "major.minor.patch"
- enum support
- Added error checking and reporting
- import support (removed the C pre-processor)
- services (tying request/reply together)
Version:
option version = "1.0.0";
Enum:
enum colours {
RED,
BLUE = 50,
};
define foo {
vl_api_colours_t colours;
};
Services:
service {
rpc foo returns foo_reply;
rpc foo_dump returns stream foo_details;
rpc want_stats returns want_stats_reply
events ip4_counters, ip6_counters;
};
Future planned features:
- unions
- bool, text
- array support (including length)
- proto3 output plugin
- Refactor C/C++ generator as a plugin
- Refactor Java generator as a plugin
Change-Id: Ifa289966c790e1b1a8e2938a91e69331e3a58bdf
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: I5f105a1abb8a28645d6c961ad92f91c23787047f
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I91892084133daadb74caa7aa13ee1071599ba892
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I2dd5dbafe36e5ae536b3e600beb6920a71238b7a
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
On reviece side svm queue only permits blocking and
non-blocking calls. This patch adds timed wait blocking
functionality which returns either on signal/event or
on given time out.
It also preserves the original behavior, so it will not
hurt client applications which are using svm queue.
Change-Id: Ic10632170330a80afb8bc781d4ccddfe4da2c69a
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I55d9953851062f7106c66701d46bcd9073cf1ee4
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
This reverts commit 4363ad6c96b5641fca1b16c5a6ec22e2364adcfd.
Change-Id: Ie71ee265659e06ada37f40cfceed4c20b1cbf6e5
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
- separate client/server code for both memory and socket apis
- separate memory api code from generic vlib api code
- move unix_shared_memory_fifo to svm and rename to svm_fifo_t
- overall declutter
Change-Id: I90cdd98ff74d0787d58825b914b0f1eafcfa4dc2
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
override the default CXXFLAGS (which provides a -O2) with the
system set CFLAGS (providing -O0/-O2 for debug/release builds)
Change-Id: Ic84e51baafdc22d37139303566d705d759e36721
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
- rename l2_bridged to is_dvr. Including on the ip.api
this was new in the 18.01 release so no compatability issues.
- steal the free space in vnet_buffer_opaque_t for use with flags.
- run the ipX-output feature arc from the DVR DPO
Change-Id: I040e5976d1dbe076fcdda3a40a7804f56337ce3f
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ic55ad2e0a1435f552ce84ed1a9b1981191bc178b
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I112afaa1f2ccd2ee62a436c73802afaea9b44779
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
L2 Emulation is a feautre that is applied to L2 ports to 'extract'
IP packets from the L2 path and inject them into the L3 path (i.e.
into the appropriate ip[4|6]_input node).
L3 routes in the table_id for that interface should then be configured
as DVR routes, therefore the forwarded packet has the L2 header
preserved and togehter the L3 routed system behaves like an L2 bridge.
Change-Id: I8effd7e2f4c67ee277b73c7bc79aa3e5a3e34d03
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
New constructor can construct the l3 rule
using all or partial paratmeters.
Change-Id: I828ec1c4713decb5824e4a73c3692cebc2324cc2
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I341f522b46dd85fb3b1dd43fd125513f16f89171
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I4c22ad08bf8fa3e8f05b8938ff447cafa4eea5b2
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: I39b975e6dc3b3ed1f81c1736ed498aee05f6a88b
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|