Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: refactor
Change-Id: Ib4a8e7e64093b2db1deda6663325080bc8337605
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Use consistent API types.
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: I1964e4f0afe6f030ae9c8e28fcba5fd81aa1f130
|
|
Type: feature
Change-Id: I3fe27a8ef577741d9a5c4f090ec91cf68fb44fe3
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Use consistent API types.
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: Ia63d920788add2584060a240321acced7a471640
|
|
In addition to the external vppapitrace tool, VPP itself supports dumping of API trace files.
In two formats, "custom-dump" and "dump". "dump" gives a human friendly list,
and "custom-dump" is meant to give a list of commands that can be fed to VAT.
This patch only deals with "dump".
Prior to this fix, auto-generation was only done for the basic types.
This fix adds support for any type, including lists, and supports pretty-printing
of enums, strings, IP addresses, MAC addresses and so on.
Usage: api trace dump <api-trace-file>
For example
Change-Id: I4e485680e6dcfce7489299ae6cf31d835071ac40
---------- trace 48 -----------
vl_api_sw_interface_set_flags_t:
_vl_msg_id: 75
client_index: 0
context: 10
sw_if_index: 1
flags: IF_STATUS_API_FLAG_ADMIN_UP
---------- trace 49 -----------
vl_api_sw_interface_add_del_address_t:
_vl_msg_id: 88
client_index: 0
context: 11
sw_if_index: 1
is_add: 1
del_all: 0
prefix: 172.16.1.1/24
---------- trace 51 -----------
vl_api_cli_inband_t:
_vl_msg_id: 819
client_index: 0
context: 13
cmd: packet-generator capture pg0 pcap /tmp/vpp-unittest-TestMAP-YhcmDX/pg0_out.pcap disable
---------- trace 58 -----------
vl_api_ip_neighbor_add_del_t:
_vl_msg_id: 199
client_index: 0
context: 20
is_add: 1
neighbor:
sw_if_index: 2
flags: IP_API_NEIGHBOR_FLAG_NONE
mac_address: 0202.0000.ff02
ip_address: fd01:2::2
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I5556d06008de2762e7c2d35a8b0963ae670b3db1
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Regression from https://gerrit.fd.io/r/#/c/vpp/+/21508/
The aformentioned patch changed lb and mode to u32. But it does not make the
same change to custom_dump.c
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I2b7d065e21427090af3deb47c8a24c5da679e4f5
|
|
Not all interfaces have the same characteristics within the bonding group.
For active-backup mode, we should do our best to select the slave that
performs the best as the primary slave. We already did that by preferring
the slave that is local numa. Sometimes, this is not enough. For example,
when all are local numas, the selection is arbitrary. Some slave interfaces
may have higher speed or better qos than the others. But this is hard to
infer.
One rule does not fit all. So we let the operator to optionally specify the
weight for each slave interface. Our primary slave selection rule is now
1. biggest weight
2. is local numa
3. current primary slave (to avoid churn)
4. lowest sw_if_index (for deterministic behavior)
This selection rule only applies to active-backup mode which only one slave
is used for forwarding traffic until it becomes unreachable. At that time,
the next "best" slave candidate is automatically promoted. The slaves are
sorted according to the preference rule when they are up. So there is no need
to find the next best candidate when the primary slave goes down.
Another good thing about this rule is when the down slave comes back up, it
is selected as the primary slave again unless there is indeed a "better"
slave than this down slave that were added during that period.
To set the weight for the slave interface, do this after the interface is
enslaved
set interface bond <interface-name> weight <value>
Type: feature
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I59ced6d20ce1dec532e667dbe1afd1b4243e04f9
|
|
This reverts commit 2959d42feb576c0e00c28c4e27658b25f6c783e9.
Lacks client side fixes.
Type: fix
Change-Id: Ib94b18e74325cede41ed1733e57896f17a952526
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Explicitly using string type in API allows for autogenerating tools to print
strings instead of hex-dumping byte strings.
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I573962d6b34d5d10aab9dc6a5fdf101c9b12a6a6
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Type: refactor
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I823c2cd307a4613653a2d20f564dda062d4da31b
|
|
sw_if_index argument is u32 and it needs to be converted to host order
for format in custom dump, a very highly sophisticated stuff.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: Ie6d49a17e4411df5d567dbb2a7c95993dceda31b
|
|
Use of consistent API types for interface.api
Type: fix
Change-Id: I88206d7d0907cffd564031f73c9a996df2e5e21a
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Add gso option in create vhost interface to support gso and checksum
offload.
Tested with the following startup options in qemu:
csum=on,gso=on,guest_csum=on,guest_tso4=on,guest_tso6=on,guest_ufo=on,
host_tso4=on,host_tso6=on,host_ufo=on
Type: feature
Change-Id: I9ba1ee33677a694c4a0dfe66e745b098995902b8
Signed-off-by: Steven Luong <sluong@cisco.com>
|
|
Type: feature
Change-Id: I72676495a85fbecc946aa266a75234cce70c3a5e
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: feature
Change-Id: I514b40026986f3828c8727453456b20a0a45f3af
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Multiple API message handlers call vnet_get_sup_hw_interface(...)
without checking the inbound sw_if_index. This can cause a
pool_elt_at_index ASSERT in a debug image, and major disorder in a
production image.
Given that a number of places are coded as follows, add an
"api_visible_or_null" variant of vnet_get_sup_hw_interface, which
returns NULL given an invalid sw_if_index, or a hidden sw interface:
- hw = vnet_get_sup_hw_interface (vnm, sw_if_index);
+ hw = vnet_get_sup_hw_interface_api_visible_or_null (vnm, sw_if_index);
if (hw == NULL || memif_device_class.index != hw->dev_class_index)
return clib_error_return (0, "not a memif interface");
Rename two existing xxx_safe functions -> xxx_or_null to make it
obvious what they return.
Type: fix
Change-Id: I29996e8d0768fd9e0c5495bd91ff8bedcf2c5697
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
If numa-only is set, Only slaves on local numa node
transmit pkts if have at least one, otherwise the bond
interface works as usual.
CLI change:
create bond mode lacp [load-balance { l2 | l23 | l34 } {numa-only}]
[hw-addr <mac-address>] [id <if-id>]
The new member "u8 numa_only;" is also added to bond_create_if_args_t.
Type: feature
Change-Id: Icdccedafb0738d8c9d4a5acce909ce562428c071
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
|
|
using inlines exposes the users to the internal data types used by VPP, namely vec.h. This file does not compile with a C++ compiler.
Type: feature
Change-Id: I1544fdd9eae998309f865df61df78571bdb96903
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Fixed the missing bond_dump, slave_dump, and rx_placement_dump in
custom_dump.c
Type: fix
Change-Id: I9bf9ce071db175543edb383768c5915b939758ae
Signed-off-by: Steven Luong <sluong@cisco.com>
|
|
Type: feature
Change-Id: I637ca85bb0c5c3e9704e242747b1174bfcd74e02
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
This patch adds support to configure host mtu size using
api, cli or startup.conf.
Type: feature
Change-Id: I8ab087d82dbe7dedc498825c1a3ea3fcb2cce030
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: refactor
Change-Id: I492b6e88acadf0ab0e4d7b1c0c5d1cab84c1726f
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
please consult the new tunnel proposal at:
https://wiki.fd.io/view/VPP/IPSec
Type: feature
Change-Id: I52857fc92ae068b85f59be08bdbea1bd5932e291
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Enhance the route add/del APIs to take a set of paths rather than just one.
Most unicast routing protocols calcualte all the available paths in one
run of the algorithm so updating all the paths at once is beneficial for the client.
two knobs control the behaviour:
is_multipath - if set the the set of paths passed will be added to those
that already exist, otherwise the set will replace them.
is_add - add or remove the set
is_add=0, is_multipath=1 and an empty set, results in deleting the route.
It is also considerably faster to add multiple paths at once, than one at a time:
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.11
100000 routes in .572240 secs, 174751.80 routes/sec
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.12
100000 routes in .528383 secs, 189256.54 routes/sec
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.13
100000 routes in .757131 secs, 132077.52 routes/sec
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.14
100000 routes in .878317 secs, 113854.12 routes/sec
vat# ip_route_add_del 1.1.1.1/32 count 100000 multipath via 10.10.10.11 via 10.10.10.12 via 10.10.10.13 via 10.10.10.14
100000 routes in .900212 secs, 111084.93 routes/sec
Change-Id: I416b93f7684745099c1adb0b33edac58c9339c1a
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Previous use of strndup() required user to remember to call free().
Now return a vector pointing directly to the API message string.
Of course user must remember to copy the string out if lifetime
is longer than API message lifetime.
Change-Id: Ib5e2b3d52d258e1a42ea9ea9a9e04abbe360e2bf
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Type: refactor
Change-Id: I8489ccd54411c2aa9355439c5641dc31012c64a2
Signed-off-by: Benoît Ganne <bganne@cisco.com>
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
- add to the Punt API to allow different descriptions of the desired packets: UDP or exceptions
- move the punt nodes into punt_node.c
- improve tests (test that the correct packets are punted to the registered socket)
Change-Id: I1a133dec88106874993cba1f5a439cd26b2fef72
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I7b735f5a540e8c278bac88245acb3f8c041c49c0
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Add a registration overwritten warning to ip4_icmp_register_type(...)
Change-Id: I6c2aabdb979b54ec49e827225acc74559ac4caab
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Native virtio device through legacy driver can't support configurable queue size.
Change-Id: I76c446a071bef8a469873010325d830586aa84bd
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I5010cd34123c6498230dedac6ba8dd774a1085f9
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I0b47590400aebea09aa1b27de753be638e1ba870
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Icdcbac7453baa837a9c0c4a2401dff4a6aa6cba0
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I1cb391c56463a770d874b2bfc8a0b7f6909ba55a
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
This reverts commit e63325e3ca03c847963863446345e6c80a2c0cfd.
Allow time for CSIT to accommodate.
Change-Id: I59435e4ab5e05e36a2796c3bf44889b5d4823cc2
Signed-off-by: ot@cisco.com
|
|
Use of consistent API types for interface.api
Change-Id: Ieb54cebb4ac96b432a3f0b41596718aa2f34885b
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
use address_t and mac_address_t for IPv6 and ARP entries
and all other API calls in ip.api aprat from the route ones,
that will follow in a separate commit
Change-Id: I67161737c2184d3f8fc1e79ebd2b55121c5b0191
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I82dceaa27a7b0c96de077cf283e4f64aa426f271
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I46ec5ba03d61c1fe0aba92f649f43746b5292cc3
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I78fe58144fa3ba2e1c7135897a13a2541f235c91
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
|
|
Change-Id: I747ca01dc8df9fb5e11168ec46979c4a1f1baa7c
Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
|
|
Implement API/CLI to clear IP-MAC tables used for ARP-termination
in the specified bridge domain.
The CLI to flush MAC IP tables for a BD is:
set bridge-domain arp entry <bd-id> del-all
The API added is bd_ip_mac_flush.
Change-Id: I34ceb87c0f480c7102f6559312c24081ed485af8
Signed-off-by: John Lo <loj@cisco.com>
|
|
The new string type is modelled after string in proto3.
It is always variable length.
Change-Id: I64884067e28a80072c8dac31b7c7c82d6e306051
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Michal Cmarada <mcmarada@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: If7835e9b80ec9402404bfc8d271eb11a10ef992b
Signed-off-by: Pavel Kotucek <pavel.kotucek@pantheon.tech>
|
|
Remove old nonfunctional code for setting link-local addresses.
Use common API for setting all IPv6 addresses.
Change-Id: I562329df86341f81ef2441510a9eefbbf710f6e0
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: I29f20dbaf2c2d735faff297cee552ed648f6f61b
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ied34720ca5a6e6e717eea4e86003e854031b6eab
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Handles next_hop_weight, next_hop_preference and next_hop_table_id
properly in vl_api_mpls_tunnel_add_del_t_handler(). Also updated
vpp_api_test and custom_dump handling of related APIs.
Change-Id: I89e211bfa3b9d8ead396b24b3c46b7c7f6511f44
Signed-off-by: John Lo <loj@cisco.com>
|
|
Change-Id: I3124238ab4d43bcef5590bad33a4ff0b5d8b7d15
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Split the stat_segment.c code from stats.c.
Rename stats.[ch] to prepare for removing (19.01?)
In addition stats.api can be removed.
Since the stats aggregation for the stat segment does not use the API, that
part is now done on the main thread. (Old stats aggregator is also left in place).
Change-Id: I9867429f4fc547b1a7ab7f88bc4f3625428d681b
Signed-off-by: Ole Troan <ot@cisco.com>
|