summaryrefslogtreecommitdiffstats
path: root/src/vppinfra
AgeCommit message (Collapse)AuthorFilesLines
2018-05-19Disable vector code in vlib_buffer_enqueue_to_next if no msb mask functionDamjan Marion1-0/+2
This fixes ARM64 build where we dont have defined u16x8_msb_mask(...) Change-Id: I864f5134a0d951601810c800f587d173b3b7ef41 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-05-18Add vlib_buffer_enqueue_to_next inline functionDamjan Marion3-1/+22
Change-Id: I1042c0fe179b57a00ce99c8d62cb1bdbe24d9184 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-05-17Add buffer pointer-to-index and index-to-pointer array functionsDamjan Marion1-0/+22
Change-Id: Ib3fcc3ceb7f315389bcdecbb7d9632540a5dd6ba Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-05-11Periodic scan and probe of IP neighbors to maintain neighbor poolsJohn Lo2-0/+6
Scan IPv4 and IPv6 neigbor pool entries once a minute to keep them up to date. The neighbor of an entry is probed if its time-stamp is older than 1 minute. If the neighbor respond, its time-stamp will be updated. If there is no response from a neighbor, its entry will be deleted when the time-stamp of the entry become more than 4 minutes old. Static neighbor entries are not probed nor deleted. Implemented CLI and API to enable and disable priodic scan of IPv4, IPv6 or both types of IP neighbors. CLI is "ip scan-neighbor" and API is "ip_scan_neighbor_enable_disable". Other IP neighbor scan parameters can also be changed from their defaults via the CLI/API. Change-Id: Id1a0a934ace15d03db845aa698bcbb9cdabebfcd Signed-off-by: John Lo <loj@cisco.com>
2018-05-11VPP-1275 Fix memory leaks in IPsec CLIKlement Sekera1-1/+1
Change-Id: I1f7c634328f25b33580a215af2daeb498cd3b181 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-05-10vppinfra: use count_trailing_zeros in sparse_vec_indexDamjan Marion3-68/+30
It is much cheaper to use ctzll than to do shift,subtract and mask in likely case when we are looking for 1st set bit in the uword. Change-Id: I31954081571978878c7098bafad0c85a91755fa2 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-05-10vppinfra: use popcnt instruction when availableDamjan Marion1-0/+8
Change-Id: Id02d613b8613a2d448840fe2d6a5e3b168a3c563 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-05-09dpdk: tx code reworkDamjan Marion1-0/+12
Change-Id: Ifea9c772e8784642433b92091f5769eb9ec06890 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-05-05autodetect alignment during _vec_resizeDamjan Marion5-8/+12
Change-Id: I2896dbde78b5d58dc706756f4c76632c303557ae Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-05-04Harmonize vec/pool_get_aligned object sizes and alignment requestsDave Barach2-0/+4
Object sizes must evenly divide alignment requests, or vice versa. Otherwise, only the first object will be aligned as requested. Three choices: add CLIB_CACHE_LINE_ALIGN_MARK(align_me) at the end of structures, manually pad to an even divisor or multiple of the alignment request, or use plain vectors/pools. static assert for enforcement. Change-Id: I41aa6ff1a58267301d32aaf4b9cd24678ac1c147 Signed-off-by: Dave Barach <dbarach@cisco.com>
2018-04-30Remove historical README fileDave Barach1-43/+0
Change-Id: I54a00686a7f3a61f583a5f701a0ab6c5480a455b Signed-off-by: Dave Barach <dave@barachs.net>
2018-04-25dpdk: complete rework of the dpdk-input nodeDamjan Marion4-5/+149
Change-Id: If174d189de40e6f9ffae99997bba93a2519d9fda Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-04-18vppinfra: make set_mempolicy failure non-critical unless NUMA_FORCE is setDamjan Marion1-1/+2
Change-Id: I6c1c855cf5fc2ee06f1c7ddd6576ca16cd556fdd Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-04-11Clean up temp dir in failure casesDave Barach1-0/+3
Change-Id: Icfb99a09726c01e96ff14967afbafa4116e02eff Signed-off-by: Dave Barach <dbarach@cisco.com>
2018-03-22Add circular loggingDave Barach3-21/+85
Change-Id: Ide8bf41e24a427643a3a17b1c9089993790c12a6 Signed-off-by: Dave Barach <dave@barachs.net>
2018-03-12Remove md5.[ch] from vppinfraDave Barach3-515/+0
Removed the sole use of it from ip6_neighbor.c Change-Id: Ie53cb3b6a3a41ec0917ec2042e5006d0cfaefc01 Signed-off-by: Dave Barach <dave@barachs.net>
2018-03-09Correct address calculation for VPP-1168Lee Roberts1-1/+1
Use (u64) cast to ensure proper address calculations. Change-Id: I6bad50010b140189f1b0af177e55da0045bd7a93 Signed-off-by: Lee Roberts <lee.roberts@hpe.com>
2018-03-06glibc 2.27 fixMarco Varlese1-0/+2
With glibc 2.27 the memfd_create has been added to the devel libraries. That's causing the internally defined static function to clash with the system wide one. This patch addresses that issue on systems with latest glibc libraries. Change-Id: I788bf49b23d5b5f1cb1c0374e243d8a429178a71 Signed-off-by: Marco Varlese <marco.varlese@suse.com>
2018-03-04vppinfra: fix clib_mem_vm_ext_alloc non-shared allocationsDamjan Marion2-3/+9
Change-Id: I6d049c0875b91f67f008dc04ae7efe2f8ddc276e Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-02-26Added u8x16,u32x4,u64x2 variants of _zero_byte_mask(x) for ARM/NEON ↵Adrian Oanca1-0/+20
platform. VPP-1129 Change-Id: I954acb56d901e42976e71534317f38d7c4359bcf Signed-off-by: Adrian Oanca <adrian.oanca@enea.com>
2018-02-24u8x16_compare_byte_mask - optimize to use 128bit registers as suggested by ↵Adrian Oanca1-24/+9
Nintin Change-Id: I88aabd34ef385d620695ac17ec3fe2f4a5177ada Signed-off-by: Adrian Oanca <adrian.oanca@enea.com>
2018-02-23Add prefetch inlines, update bi-hash doc tagsDave Barach2-12/+90
Change-Id: I2e9d01ccba5288e89b886464436097d3cb7d2d18 Signed-off-by: Dave Barach <dave@barachs.net>
2018-02-22bihash table size perf/scale improvementsDave Barach3-41/+73
Directly allocate and carve cache-line-aligned chunks of virtual memory. To a first approximation, bihash wasn't using clib_mem_free(...). We eliminate mheap object header/trailers, which improves space efficiency. We also eliminate the 4gb bihash table size limit. An 8_8 bihash w/ 100 million random entries uses 3.8 Gbytes. Change-Id: Icf925fdf99bce7d6ac407ac4edd30560b8f04808 Signed-off-by: Dave Barach <dave@barachs.net>
2018-02-21vppinfra: change default cache line size 64 bytesDamjan Marion1-10/+2
This change only affects Aarch64 where previously we were using 128 bytes. Change-Id: I52a3f2f3ff8c06abe8ae3933bc0d7a2a7749dd8a Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-02-21vppinfra: remove vector_iwmmxt.hDamjan Marion2-126/+0
Change-Id: I71fac34b071a07b4331cb5c900c3b8667c1fc114 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-02-21add 'is_all_zero(x)' for NEONAdrian Oanca1-0/+24
Change-Id: I5045e0f3ac4698e820b69ad46b96763e404e6fe4 Signed-off-by: Adrian Oanca <adrian.oanca@enea.com>
2018-02-20vppinfra: autogerate vector typedefs and basic inline functionsDamjan Marion5-379/+83
Change-Id: Ie9f611fa6a962b0937245f5cc949571ba11c5604 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-02-20Reset expired timer vector length after callbackDave Barach1-1/+4
Otherwise, in a "catch-up / multiple tick" case, the code will repeatedly hand previously-processed expired timer handles to the user callback. Change-Id: Idef4f242279ea41cb557bb6cff5984de02a6503d Signed-off-by: Dave Barach <dave@barachs.net>
2018-02-20vppinfra: CLIB_HAVE_VEC128 mandates SSE4.2Damjan Marion2-9/+3
Change-Id: I6511110d0472203498a4f8741781eeeeb4f90844 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-02-19Use neutral vector code for ethernet_frame_is_taggedDamjan Marion1-0/+25
Also it removes ethernet_frame_is_any_taged implemebntation which seems to be equally costly compared to two invocations of ethernet_frame_is_tagged. Change-Id: If1c95f8267cd34b807ec07e0d675cbd0db2fdf9f Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-02-18fix format_hexdumpDamjan Marion1-1/+2
Change-Id: I9710be2e722d716e22d989b3417fb49d2db0848a Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-02-14vppinfra: Remove empty fileMohsin Kazmi1-0/+0
Change-Id: I3908cc112b40d4bb52da18e7c3ac5ae0af455f87 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2018-02-09GBP pluginNeale Ranns1-0/+0
Group Base Policy (GBP) defines: - endpoints: typically a VM or container that is connected to the virtual switch/router (i.e. to VPP) - endpoint-group: (EPG) a collection of endpoints - policy: rules determining which traffic can pass between EPGs a.k.a a 'contract' Here, policy is implemented via an ACL. EPG classification for transit packets is determined by: - source EPG: from the packet's input interface - destination EPG: from the packet's destination IP address. Change-Id: I7b983844826b5fc3d49e21353ebda9df9b224e25 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-02-08add CLIB_HAVE_VEC128 with NEON intrinsics (VPP-1127)Gabriel Ganne2-8/+64
Enable CLIB_HAVE_VEC128 if both aarch64 and __ARM_NEON ie. armv8 only, not armv7 Add more neon compare intrinsics wrappers. I only add simple intrinsics wrappers. More complex ones can be added later as they are needed, with performance tests on the corresponding feature to back them up. Remove wrongly added 128bits definitions defined on both armv7 and armv8 without concern for NEON instructions presence. Notable correspondinf code activations: * MHEAP_FLAG_SMALL_OBJECT_CACHE in mheap.c * ip4 fib mtrie leaves access * enable ixge plugin compilation for aarch64 (conf still disables it by default) Change-Id: I99953823627bdff6f222d232c78aa7b655aaf77a Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
2018-02-08Minimize bihash memory consumptionDave Barach3-118/+207
Reference-count the number of entries in each bucket. If the reference count goes to zero, free the backing store. Add long-term churn-testing to test_bihash_template.c, thanks to Andrew Yourtchenko for the initial implementation. Change-Id: I4fbd9229cacfaba8027a85cbf87b74afdead6e39 Signed-off-by: Dave Barach <dave@barachs.net>
2018-02-06vlib: epoll on worker threadsDamjan Marion1-0/+25
This patch teaches worer threads to sleep and to be waken up by kernel if there is activity on file desctiptors assigned to that thread. It also adds counters to epoll file descriptors and new debug cli 'show unix file'. Change-Id: Iaf67869f4aa88ff5b0a08982e1c08474013107c4 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-02-06Provide page-aligned length to ftruncate.Igor Mikhailov (imichail)1-1/+1
For some files such as hugepages files, ftruncate() fails with the error "Invalid argument" if the 'length' parameter is not on a page boundary. Change-Id: I42a9cde98707da15e3c5d1653046e2277fc7a424 Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
2018-02-05session: segment manager refactorFlorin Coras1-2/+19
- use valloc as a 'central' segment baseva manager - use per segment manager segment pools and use rwlocks to guard them - add session test that exercises segment creation - embed segment manager properties into application since they're shared - fix rw locks Change-Id: I761164c147275d9e8a926f1eda395e090d231f9a Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-02-01Add flowhash hash table to vppinfraPierre Pfister4-0/+998
This hash table intends to provide an alternative to the widely used bihash table in places where either: - Hash entry timeout is required - The hash table data does not fit in CPU cache Although the bihash table is very fast, each lookup requires accessing two cache lines in a serialized fashion. It works fine when the hash table is in cache, but hits a wall when it does not. The 'flowhash' table uses a simplified design (at the cost of a less good bucket auto-scaling) where each access only requires a single memory lookup (in the absence of collision). The hash table also uses a reduced number of registers. In practice, a VPP node implementing a stateful feature would typically: - prefetch buffer metadata (in-cache) - prefetch packet header (in-cache) - compute hash & prefetch hash bucket (possibly in RAM) - read/write key and value from bucket Using this hash table, it is possible to pipeline accesses in a way that does not exhaust CPU's line field buffers, even when the requested value is located in RAM (i.e. not in cache). Measurements showed it was possible to scale to tens of millions of flows (with a full 5-tuple matching and 32B value, i.e. 1 cache line per flow) with no performance degradation when the hash table grows to the point it doesn't fit in cache anymore. I have used this table in a couple of non-open-sourced projects, but think it might be useful to lb, nat, and possibly other VPP subsystems. More information in the .h file. Change-Id: I2b13dde0eabd868b75da1cedbfca0bf74d705102 Signed-off-by: Pierre Pfister <ppfister@cisco.com>
2018-01-30Compile valloc.c, install header file, etc.Dave Barach1-1/+1
Change-Id: Ibc252d9ed595be955790ec1c97d8730e43ad89b2 Signed-off-by: Dave Barach <dave@barachs.net>
2018-01-30Arm system counter cleanupBrian Brooks2-18/+19
Add some description and cleanup code that uses Arm system counter. Change-Id: Ie1fe00e3e4b5d98867617b7b0184ac526e333c53 Signed-off-by: Brian Brooks <brian.brooks@arm.com>
2018-01-27First-fit virtual space allocatorDave Barach3-0/+700
Change-Id: I75e6c7d1a6ff1fcebc81ec10bd86b79f2bf3dc22 Signed-off-by: Dave Barach <dave@barachs.net>
2018-01-25vppinfra: add readers-writer lockFlorin Coras1-14/+98
Change-Id: I606fd89c410369cbd9ce9dcaaaa9dc58796e7c0e Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-01-25session: add support for memfd segmentsFlorin Coras2-2/+3
- update segment manager and session api to work with both flavors of ssvm segments - added generic ssvm slave/master init and del functions - cleanup/refactor tcp_echo - fixed uses of svm fifo pool as vector Change-Id: Ieee8b163faa407da6e77e657a2322de213a9d2a0 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-01-24Adding a format function for bihash init routine to format the key, value, ↵Vijayabhaskar Katamreddy2-3/+28
when verbose option is used Change-Id: Ib63ead4525332f897b8a1d8a4cf5a0eb1da1e7f3 Signed-off-by: Vijayabhaskar Katamreddy <vkatamre@cisco.com>
2018-01-19Sub-Interface deletion not cleanup hash's properly (VPP-1136)John Lo1-4/+6
On deleting sub-interfaces, functions vnet_delete_sub_interface() and vnet_delete_hw_interface() are not cleaning up sub-interface related hash tables and memory properly. Change-Id: I17c7c4b2078c062c77bfe48889beb677610035ca Signed-off-by: John Lo <loj@cisco.com> (cherry picked from commit 7f5bec647c9dc743c015d461d040e63a77fd0a08)
2018-01-17ssvm: reuse clib mem infra for memfd segmentsFlorin Coras2-8/+64
Change-Id: I67648dbed3c7ed291b3e1ce617d83a776d3623bb Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-01-09physmem: fix physmem allocation on kernels without NUMA supportDamjan Marion1-4/+4
Change-Id: I056598a1818a39c2da73e252600c14585e5aae83 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-01-09api: refactor vlibmemoryFlorin Coras1-0/+1
- separate client/server code for both memory and socket apis - separate memory api code from generic vlib api code - move unix_shared_memory_fifo to svm and rename to svm_fifo_t - overall declutter Change-Id: I90cdd98ff74d0787d58825b914b0f1eafcfa4dc2 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-01-06aarch64 - show cpu microarchitectureGabriel Ganne1-0/+50
Combine implementer, part, variant, and revision into one cpu description line. For example : ARM (Cortex-A57 PASS 1.2) * get infos from /proc/cpuinfo * only recognize armv8 processors * add all given cavium processors * Cavium starts counting variants from 1 instead of 0 Change-Id: I4f3820fb13a6bd2a0dc59e28fbe6f48a5b0ceb25 Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>