aboutsummaryrefslogtreecommitdiffstats
path: root/src
AgeCommit message (Collapse)AuthorFilesLines
2017-10-02L2-FIB:add mac learn events testEyal Bari1-56/+49
fixes an issue where events were not sent if BD doesn't enable mac aging Change-Id: Iddc53cb5c45e560633e6c5cff2731dccfc70ad5b Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-09-28cdp/lldp: punt for no bufferSteven2-0/+6
When making a call to vlib_packet_template_get_packet(), it is possible to get back a NULL if the system runs out of buffer. This can happen when there is buffer leaks. But don't crash just because we run out of buffers, just punt. Change-Id: Ie90ea41f3dda6e583d48959cbd18ff124158d7f8 Signed-off-by: Steven <sluong@cisco.com>
2017-09-28C++ API: remove deprecated throw listsKlement Sekera1-8/+4
Change-Id: Ia58664438c9dc949884a794bd123555a13a02e6c Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-09-28drop python3 dependencyKlement Sekera3-22/+25
Change-Id: I99c2c1d0d5b96f33efdb58dd3a2897a752e65349 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-09-27Update package versionFlorin Coras1-1/+1
Change-Id: Ic9bc303b65c95a0e06f90c75b067056b0b11e654 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-09-28General documentation updatesChris Luke3-40/+45
- We now have several developer-focused docs, so create an index page for them. - Rework several docs to fit into the index structure. - Experiment with code highlighting; tweak the CSS slightly to make it slightly nicer to look at. Change-Id: I4185a18f84fa0764745ca7a3148276064a3155c6 Signed-off-by: Chris Luke <chrisy@flirble.org>
2017-09-28tun/tap: Bad packets sent to kernel via tun/tap interfaceSteven2-22/+29
It was observed that under heavy traffic, VPP accidentally sent traffic with the wrong source and destination to the tun/tap interface. Traffic appears to be sent to the wrong direction. This problem is only seen when worker thread is configured. When worker thread is used, TX and RX may reside in different core. Yet both TX and RX threads are sharing the same global variable, namely iovecs without any mutex or memory barrier protection. This creates a race condition when heavy traffic is blasted to VPP, like 1000 pps. We could create a mutex or memory barrier to ensure atomic memory access. But why bother? It is a lot cheaper to just decouple the iovecs such that TX and RX have their own iovecs. Change-Id: I86a5a19bd8de54d54f32e1f0845bae6a81bbf686 Signed-off-by: Steven <sluong@cisco.com>
2017-09-27VPP-990 remove registered handler if control ping failsv18.01-rc0Matej Perina3-0/+14
Change-Id: I5ca5763f0dc0a73cc6f014b855426b7ac180f356 Signed-off-by: Matej Perina <mperina@cisco.com>
2017-09-27LISP: add API handlers for set/get transport protocolFilip Tehlar4-0/+194
Change-Id: Ib675164c475edcdbe3013df7b847adf5e050c53f Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-09-27VLAN support on host(af-packet) interface.Akshaya N1-3/+26
On host interface if a VLAN tagged packet is received, linux kernel removes the VLAN header from packet byte stream and adds metadata in tpacket2_hdr. This patch explicitely checks for the presense of VLAN metadata and adds it in VPP packet. Change-Id: I0ba35c1e98dbc008ce18d032f22f2717d610c1aa Signed-off-by: Akshaya N <akshaya@rtbrick.com>
2017-09-27Fix: unnecesary uio binding for Mellanox NICSteve Shin1-1/+3
UIO binding is not required for Mellanox NIC and calling vlib_pci_bind_to_uio() should be skipped. Change-Id: I10ea457bc3c8d4be8117dec51d5bd940ee416a44 Signed-off-by: Steve Shin <jonshin@cisco.com>
2017-09-27Various fixes for issues found by Coverity (VPP-972)Chris Luke5-3/+25
174267: Revisit this string termination issue 174816: Add check for NULL when trace is enabled 177211: Add notation that mutex is not required here 177117: Added check for log2_page_size == 0 and returns an error if so 163697,163698: Added missing sw_if_index validation Change-Id: I5a76fcf6505c785bfb3269e353360031c6a0fd0f Signed-off-by: Chris Luke <chrisy@flirble.org>
2017-09-27acl-plugin: take 2 at VPP-991 fix, this time with a test case which verifies it.Andrew Yourtchenko1-2/+2
The replacement of [] with pool_elt_at_index and subsequent fixing it was incorrect - it was equivalent to &[], since it returns a pointer to the element. I've added VPP-993 previously to create a testcase, so this commit partially fulfills that one as well. Change-Id: I5b15e3ce48316f0429232aacf885e8f7c63d9522 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2017-09-26tcp: update snd_nxt after congestion recoveryFlorin Coras2-9/+7
Change-Id: I2cf4c4850b9c3c093a7dce0cec89b9f710f69393 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-09-26Add thread-safe event signaller, use RPC where requiredDave Barach5-5/+73
Update ping code to use the new function Change-Id: Ieb753b23f8402cbe5667c22747896784c8ece937 Signed-off-by: Florin Coras <fcoras@cisco.com> Signed-off-by: Dave Barach <dave@barachs.net>
2017-09-26NAT: remove worker_by_in lookup hash table (VPP-992)Matus Fabian4-97/+30
Change-Id: I3873d3e411bf93cac82e73a0b8e3b22563aaf217 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-09-26Memory overwritten when using unformat %u (VPP-987)Aequitas3-19/+19
Change-Id: I7d8f807fb502d61688aa1dee25fa4edcbeb32f41 Signed-off-by: Aequitas <wang.junqi@zte.com.cn>
2017-09-25tcp: do not sample rtt for retransmitted segmentsFlorin Coras3-81/+100
Change-Id: I365c31607332a944ef498369881332b515894ed7 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-09-25acl-plugin: use vec_elt_at_index rather than pool_elt_at_index to access ↵Andrew Yourtchenko1-2/+2
vector elements bb7f0f644 aimed to fix the coverity issue has incorrectly replaced the previous [] access with pool_elt_at_index(), for an element of a vector, with predictably interesting result. VPP-991 has uncovered the issue. Change-Id: Ifd3fb70332d3fdd1c4ff8570372f394913f7b6c8 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2017-09-25Fix usage string for vatJerome Tollet1-1/+2
Change-Id: Idad65cbb3765500a66f1097126076a2c5fdb4f1b Signed-off-by: Jerome Tollet <jtollet@cisco.com>
2017-09-25Fix sending GARP/NA on Bonded Interface Active/Backup Link Up/DownJohn Lo5-72/+101
For bonded interface in Active/Backup mode (mode 1), we need to send a GARP/NA packet, if IP address is present, on slave link state change to up or down to help with route convergence. The callback from DPDK happens in a separate thread so we need to make sure RPC call is used to signal the send_garp_na process in the main thread. Also need to fix DPDK polling so the slave links are not polled. Change-Id: If5fd8ea2d28c54dd28726ac403ad366386ce9651 Signed-off-by: John Lo <loj@cisco.com>
2017-09-25Add binary API documentationDave Barach3-71/+474
Change-Id: Id1a5da12b13d87bacfa81094f471b95db40c39be Signed-off-by: Dave Barach <dave@barachs.net>
2017-09-25NAT: session number limitation to avoid running out of memory crash (VPP-984)Matus Fabian4-38/+120
Change-Id: I7f18f8c4ba609d96950dc1f833feb967d4a099b7 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-09-22Fix vpp "unix interactive" when running under emacs + gdbDave Barach1-3/+8
In this specific corner-case setup, ioctl (0, TIOCGWINSZ) returns window height = 0 and width = 0. Rather than declaring the terminal to be non-interactive, set the window size parameters to 80 x 24. Change-Id: If66f5f0883f1940518ec1c6e26228c9bb6f32852 Signed-off-by: Dave Barach <dave@barachs.net>
2017-09-22vhost-user: fix link-up statusYoann Desmouceaux1-1/+1
When changing the admin state of a vhost-user interface, do not put it in link-up mode if the interface is not actually ready. Change-Id: Idbc631a7126efa79d199909f9e7656d21bd412ca Signed-off-by: Yoann Desmouceaux <ydesmouc@cisco.com>
2017-09-22acl-plugin: remove the clib_warning "ACL enabling..."Andrew Yourtchenko1-4/+0
It was useful for debugging once upon a time... but time to say goodbye to it... Also remove the warning printed when sending ACL details. Change-Id: I43b2537e176556831eb7ff34b25c9068aa05ee27 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2017-09-22IP-MAC,ND:wildcard events,fix sending multiple eventsEyal Bari6-101/+216
wildcard ND events publisher was sending the last event mutiple times Change-Id: I6c30f2de03fa825e79df9005a3cfaaf68ff7ea2f Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-09-21vppctl,cli: Improve non-interactive vppctl (VPP-944)Chris Luke2-89/+404
Short version: Make vppctl behave as expected when run from scripts, or without a controlling terminal, and especially when using it with VPP commands on its command line ("non-interactively"). In particular, prevent the welcome banner and VPP CLI prompt from being sent by VPP when being used in these ways. vppctl ------ - Improve vppctl's detection of non-interactive sessions. - Pass non-interactiveness in the terminal type telnet option as a value distinct from "dumb" (which means non-ANSI capable.) - Make tty setup handling more robust. - Only send non-interactive command once we've sent the terminal type, to ensure correct event sequence; we need the VPP cli session to be in line-by-line mode. - Ignore stdin when it looks something like /dev/null. - Skip NUL bytes received from VPP. VPP CLI ------- - Detect "non-interactive" terminal types and set session parameters accordingly. - Add an "interactive" flag that controls whether the welcome banner and CLI prompt are sent. - Detect if telnet options processing switched us into line mode and act accordingly for the rest of the current input buffer. This was causing the command string to be echoed by the CLI editor code. - For non-interactive sessions, send a NUL byte after the input buffer has been processed. This is because vppctl depends on seeing traffic before it will try to close the session; a command with no output would cause it to hang. NUL bytes are ignored by all decent terminals, but we have vppctl strip them out anyway. - Prevent certain commands from running in non-interactive sessions since they manipulate interactive-related features. - For interactive sessions, quench the prompt that prints on VPP shutdown. - Detect and handle socket errors in the CLI; sessions were leaking. - Pevent SIGPIPE from ever being raised; handle EPIPE instead. We don't need VPP to die just because a socket closed just before we try to write to it! - Add a command to dump a list of current CLI sessions; mostly this was to detect session leakage, but it may have some general utility. Change-Id: Ia147da013317180882c1d967b18eefb8519a55fb Signed-off-by: Chris Luke <chrisy@flirble.org>
2017-09-21NAT: remove worker_by_out lookup hash table (VPP-989)Matus Fabian3-133/+120
Change-Id: Ibcd2cf22348ae5a72770a8f8ad25cbe8df7fd390 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-09-20session: store tep port in net orderFlorin Coras4-14/+14
Change-Id: Ie3a99f09f44ec081d9b88a213bdb8d987fb462de Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-09-20Improve API message handler re-registration checkDave Barach1-3/+5
Change-Id: Iedcea2fb45052852666b91a21eed011f5593313d Signed-off-by: Dave Barach <dave@barachs.net>
2017-09-20LISP: add debug cli for neighbor discoveryFilip Tehlar4-6/+71
Change-Id: Ib5d335d6130617d6135615c6c8fa8deaac971331 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-09-20CLI: fix segfault when browsing an empty historyYoann Desmouceaux1-3/+1
When one starts VPP, types a command, presses up rather than enter, then types a new command, unix_cli_line_process_one() segfaults. This is due to cf->cursor not being reset upon pressing up if the history is empty. Change-Id: Ie503f20a9cb551e735abb8b0f4feb8c0006d2b61 Signed-off-by: Yoann Desmouceaux <ydesmouc@cisco.com>
2017-09-20TCP: fix "tcp src-address" command with IPv6Yoann Desmouceaux1-1/+1
When given a single IPv6 address, the "tcp src-address" command incorrectly infers the end of the range by copying sizeof(ip4_address_t) bytes from the given address. Change-Id: I100d5c6674d3a3980b8c018588988bdd32ff7269 Signed-off-by: Yoann Desmouceaux <ydesmouc@cisco.com>
2017-09-20tcp: add option to punt trafficPierre Pfister5-30/+99
Until now, if the stack didn't find a connection for a packet, it sent back a reset. With the punt option enabled, packets are now enqueued to error-punt where they can be handed off to the host os. Change-Id: I12dea8694b8bd24c92b0d601412928aa7b8046cb Signed-off-by: Florin Coras <fcoras@cisco.com> Signed-off-by: Pierre Pfister <ppfister@cisco.com>
2017-09-20Fix DHCP client so it works for worker threadsJohn Lo2-2/+17
Fix dhcp_client_for_us() function to utilize rpc_call_main_thread to call vlib_process_signal_event() to ensure proper handling irrespective of it being called in main thread or worker thread. Added ASSERT to vlib_process_sinal.. path to make sure it is called in main thread. Change-Id: I4109cc049d8e4225d896ce492ce201011dc9c911 Signed-off-by: John Lo <loj@cisco.com>
2017-09-20Add ip6-local feature arcPierre Pfister4-8/+101
ip4-local feature arc existed but not ip6-local one. This patch also adds node name to the 'show ip local' command and fixes a minor include issue in vnet/ip/ip4.h file. Change-Id: I9bb8a7159917d58f89afcce974680de20d946a70 Signed-off-by: Pierre Pfister <ppfister@cisco.com>
2017-09-20NAT: don't call ipfix rpc when disabled (VPP-988)Matus Fabian1-168/+181
Change-Id: Id98b523f7b20f82291a34e73762978fa65e24140 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-09-20NAT: move session and user lookup tables to per thread data (VPP-986)Matus Fabian5-110/+151
Change-Id: I41a51bb36e31e05c76fef0b34fe006afbee27729 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-09-19format_sockaddr: add trivial support for AF_LOCAL socketsDave Barach1-0/+12
There isn't anything useful to print. Return a unique name since the unix cli uses the returned string to create a node name. Node names must be unique, or vpp will quit abruptly. Change-Id: I8f85ae8fececdbfd26c729bc32c2c2007c06d1ea Signed-off-by: Dave Barach <dave@barachs.net>
2017-09-19Add C++ APIKlement Sekera13-239/+1549
Change-Id: Iff634f22d43470e2dc028387b3816257fd7b4156 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-09-19session/tcp: improve preallocated segment handlingFlorin Coras12-138/+209
- add preallocated segment flag - don't remove pre-allocated segments except if application detaches - when preallocating fifos in multiple segments, completely fill a segment before moving to the next - detach server application from segment-managers when deleting app - batch syn/syn-ack/fin (re)transmissions - loosen up close-wait and time-wait times Change-Id: I412f53ce601cc83b3acc26aeffd7fa2d52d73b03 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-09-19Treat label=0 as an invalid next-hop-via-labelNeale Ranns1-1/+7
Change-Id: I831226111d26f5c8a795e0773e23fddcddfb1613 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-09-19LISP: support for neighbor discoveryFilip Tehlar9-110/+617
Change-Id: I0f1a051dd3b5786dc7c457bc6fc7ce4fcd0f530c Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-09-19Set RX sw_if_index on decrypted routed IPsec buffersMatthew Smith2-0/+3
For routed IPsec, set the RX sw_if_index on inbound packets to the index of the IPsec interface. When a packet is decrypted into a new buffer, bring along the RX sw_if_index of the encrypted packet to the new buffer. Change-Id: I093e9d37def2082c8d2f1deb96b1c5b97126e023 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2017-09-19Fix MPLS table create CLINeale Ranns1-7/+2
Change-Id: I1f3c0f879f636e587aa518c41e5ad99af65129a7 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-09-19Add new C APIKlement Sekera12-6/+2672
Change-Id: I717ce3cd7c867c155de149ec56623269d26d0ff7 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-09-19Implement VXLAN encap tx checksum offloadJohn Lo1-39/+108
Checksum offload is implemented in VXLAN encap over both IPv4 and IPv6. It is enabled, however, only for VXLAN over IPv6 because UDP checksum is needed only for IPv6 and optional for IPv4. Change-Id: Ib879f4f6da7346ba5e079d321c1dfd630f5058b8 Signed-off-by: John Lo <loj@cisco.com>
2017-09-19ACL plugin enable macip for ip4/ip6 trafficPavel Kotucek1-8/+4
Plus fixed problem with acl heap. Change-Id: I3d91db549ebe4595f1dab9b8780f90722540024b Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
2017-09-19Remove associated lisp-gpe entries when removing lisp local mapping.Alberto Rodriguez-Natal2-7/+76
Change-Id: Ifda4d22c9d1de210165932a0996f75cc8428ae7a Signed-off-by: Alberto Rodriguez-Natal <natal@cisco.com>