Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: fix
Change-Id: I10ebcc653491d11ca798e0a60be6eeef82c41766
Signed-off-by: Mathias Raoul <mathias.raoul@gmail.com>
|
|
Type: feature
Change-Id: I888d415ff645b3827df7d4cfb0d3c5f4ac940617
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: feature
Change-Id: I40169fbbe8a20670dd612c341b6c78b5c925bf74
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Ie136c1e94e5c25f9547fc2d6d45ce8e1630a035c
|
|
When VPP work with dpdk-plugin, linux_vfio_main_t->container_fd is always -1
since it never have chance to run open("/dev/vfio/vfio") to get the fd.
But this lead to a potential issue of VPP, that is, when start VPP without
uio-driver field setup in /etc/vpp/startup.conf, VPP will run to automatical
select uio driver in vlib_pci_bind_to_uio() and the function depend on
iommu_group value to decide to work on vfio or vfio-noiommu mode.
Since in vlib_pci_get_device_info() have the condition container_fd != -1,
so the iommu_group value will be always -1 at this scenario, this caused
that VPP mistake to run with vfio-noiommu driver on intel_iommu=on state.
Actually in order to get iommu_group and iommu_group/name value, no need to
depend on linux_vfio_main_t->container_fd value, so the fix remove the
condition lvm->container_fd != -1, then it can get the correct iommu_group
value.
Type: fix
Change-Id: I3f162fc4971b9a2b8717205f8f3b52e30c5e5b69
Signed-off-by: Yulong Pei <yulong.pei@intel.com>
|
|
Needed a bit of foreach_vlib_main(...) action to turn on/off all
instances of vm->dispatch_pcap_enable, and to pick up the pcap_main_t
pointer from vlib_global_main.
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I49b69b87934c7dc7a9835cd07aa2c5c4d3c79f18
|
|
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I9576ade941b10d1605f6c6714f312ae2a8ad5065
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Icbe9ca3dc738c6575fe382740a1cc9d29a4a74ff
|
|
Committed from SK936 seat 1A.
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I717fafbdb9b8576508d6dd72a7e5653cecebfae0
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Type: style
Change-Id: I620f15b96ee5401e0145a139f06d343d7c4fadb4
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I3255702e7c562c8d04a91a095e245756c6443a9e
|
|
Type: fix
Change-Id: Ia9f74f951f831cc5c9b5af863db1bb3f7a1a81ff
Signed-off-by: snaramre <snaramre@cisco.com>
|
|
Type: refactor
Use pending tx buffer vector to postpone dispatching of all buffers,
i.e., either generated as a result of tx events or custom tx event.
Change-Id: Ic5894c4653c338cfb04555d20857f954b245ee83
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Makes it easy to tell GETs from POSTs, etc., in case one wants to
register the same handler for multiple request types.
Return interface stats as a json array, makes .js code a lot simpler.
Type: refactor
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Iadae7b909cf3e8ea179fe93620737fdf68f888ac
|
|
Type: feature
Add infra that allows transpors to enqueue pending buffers without the
need to build and manage their own pending frames. An important benefit
is the fact that buffer wire/tx ordering is ensured by session layer.
Change-Id: I764fd1693d610b321a1d0c84b648a314f14583db
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: fix
Change-Id: I02e2cb2d349f9ddb2bfed040a08ca448f379d565
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: fix
Change-Id: Id9a328158e7c4106a95928bf8ddceb7b9e73aa25
Signed-off-by: snaramre <snaramre@cisco.com>
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Ie15ea8f01846f87cb65e90e8762dc941441fc176
|
|
Set high ssthresh out of the box and make configurable
Type: fix
Signed-off-by: Sergey Ivanushkin <sergey.ivanushkin@enea.com>
Change-Id: Iba1549b4ee55e51468ad0b28ef3d26a85fa9cae0
|
|
Useful to force content reloads
Type: feature
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Ieecb018bec61a1624574660842d7d92cd84520f9
|
|
Use consistent API types.
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: I7048f8ec598a8b06d75bdfb5d2fab9f6337c9474
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Use consistent API types.
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: I1cc42b57fbf72e2ced8b5d1283c34de2f7ff948a
|
|
Copy sw_if_index value instead of using pointers to original
bif->slaves content which could be overriden by eg. vec_del1().
Type: feature
Change-Id: I37e458effd6b2367479574f7bd3facd4e93bada4
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Change-Id: Ib03151a097caf15e4e8285afea83d1b930a874b0
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: fix
Connect ctrl message recently outgrew the maximum ctrl msg size, so
increase the limit. Also add static asserts for messages that could
potentially exceed the limit.
Change-Id: I0d3e32e0d4d67d7e222cff14ddba59a0c3fb8b00
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: fix
Change-Id: I6164ad0d97cd91b60c85302eff691836d12a0a70
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
In bond RX quad loop, when all packets within the frame have the same incoming
interface, we cannot skip calling bond_update_next because that function calls
vnet_feature_next() to update the b->current_config_index. The next node needs
the correct b->current_config_index to work with.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I3d8b3d4e0f95490f406fae7638f0c43c301ce664
|
|
Type: fix
Change-Id: I31e5d9d9e93339eb789aed20996f326b085c22a9
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: feature
Add a callback to install or remove an additional MAC address on
a DPDK-managed device. Note that some PMDs don't have support for
this so YMMV.
Change-Id: I7b0cb3fb0af0d66fbdb7b894a712897f889520a5
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: feature
Change-Id: I590612989cb3c114f8d99227ad36c3434e998597
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: feature
Add 'drop' and 'redirect-to-queue' support in
'test-flow' command and DPDK plugin
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I567bb77cb401c9bd1309ecabe802fe9de88c746b
|
|
Type: fix
- when the fifo is wrapped, and if applicable, insert a new chunk after
the tail-chunk and rebuild the rb_tree.
- make sure that this new algorithm can be applied only when the fifo is
used by a single thread (master-thread of the fifo).
Signed-off-by: Ryujiro Shibuya <ryujiro.shibuya@owmobility.com>
Change-Id: I3fc187bc496ea537ca24381e4abc08d2906c9e03
|
|
Reseting vector length confuses ASAN and does not reset data either.
Only reset data instead.
Type: fix
Change-Id: Id60b8333df28a5b636a9d302b987bbad95c85c38
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Change-Id: I82308e368d14d84f5970dad229bdcf2de7d1839d
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Change-Id: Ie63b80db56febc8a16bafcdd5399b2f92b6aa437
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Signed-off-by: Ignas Bacius <ignas@noia.network>
Change-Id: Ica069e8c9dd4efd1f00639754da471bf11418b57
|
|
Type: feature
Change-Id: I1218257af0053ae27c4394d7666fde87a732e08c
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: refactor
Change-Id: Ib4a8e7e64093b2db1deda6663325080bc8337605
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: refactor
Change-Id: I51d5bf54dfd408aa0c406cbdf0f4be10ef19d10d
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
This reverts commit d570c4d18df404cb59ef72d20d56f8e31418c8e9.
That commit introduced crash into memif make test-debug.
To reproduce: "TEST=memif make test-debug".
With this commit reverted the make test-debug for memif passes.
Type: fix
Change-Id: Ic335359e2050bb8a5d530b01c595b081476fa197
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Type: fix
Change-Id: Ib7ac53d1b59b641ccd3b1d733107d7f1ba174314
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
If the http static server plugin is enabled, register the name
"mactime.json" with the server. Visiting <web-root>/mactime.json
produces a json brain-dump of the mactime table.
Type: feature
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Ie39b0c776675864a85251b8c07fbf719d399f6de
|
|
No point in checking the return value,
as .sendall() raises on error
(and the previous check was missing "not").
Type: fix
Change-Id: I9e07709ddd7093f91ffef87808abbab264b8aa5a
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Type: fix
Change-Id: Ifdd193fab24796346b11a5df81740880f9a50ee8
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
mactime_dump API didn't copy context to _details reply,
causing subscription issues.
Change-Id: Ida9f28b437847fba67a7e0832baa2b25a46882a9
Signed-off-by: Keith Burns <alagalah@gmail.com>
|
|
Type: fix
Use api with explicit thread index to retrieve tls contex on close.
Change-Id: Ibdc4338747300b7fc8f91ef3e10bcd48ce7ae366
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: refactor
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: If8471d98053ae44cae07cdca6d269aa3c7df9887
|
|
Type: refactor
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I021dfe4a59ecda1ed77b656a81f4c935903854ea
|
|
Type: refactor
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: Ifae49981458cd3ef9e2c79d64040b2076ad93869
|
|
In the previous implementation of socket transport for PAPI,
socket methods .send and .recv_into were used.
But they are not guaranteed to send/receive all the data
for the full message. The receive part contained a loop,
but it handled only the main message, not the header.
This patch replaces .send with .sendall
and uses newly defined _read_fixed method.
Also, removed Paul from maintainers,
as he is not active much, lately.
Type: fix
Change-Id: Iae1a68bf8f9e666856b7c7d62ebfe22defc5dfe1
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|