Age | Commit message (Collapse) | Author | Files | Lines |
|
Do not access allocated elements beyond the end of the vector. They are
allocated, but not yet valid both logically (they are at best NULLs) and
according to ASAN.
Type: fix
Change-Id: Iaf43767d6d3bd4c24c7c5a0ba9b3410bbeeb0556
Signed-off-by: Dmitry Valter <d-valter@yandex-team.ru>
|
|
Type: improvement
Change-Id: I85a90774eb313020435c9bc2297c1bdf23d52efc
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
The clib interrupt structure has a couple of fields at the start of
the cacheline, and then in the next cacheline it has a bitmap, which
is then followed by an atomic bitmap. The size of the bitmaps is
based on the number of interrupts, and when the memory is allocated
the number of interrupts needed is used to size the overall block of
memory. The interrupts typically map to pool entries, so if we want
to store 512 entries then we store them in indices 0..511. This
would then take 8 6 4bit words, so each bitmap would be this size
when the struct is allocated.
It is possible to walk over the end of the allocated data with certain
sizes, one of which is 512. The reason this happens with 512 is that
the check to see when to exit the loop is returning when offset is
greater than the value needed to fit all the values. In this case
512 >> 6 = 8. If there had only been 511 entries then the size would
have been 511 >> 6 = 7, and so it would have fitted in the space.
Therefore modify the check to also check that we are not looking into
the memory beyond what we have allocated in the case where the
number of interrupt is one of the boundary values like 512.
Also add a similar check first time round the loop as it is
possible we could have ate same problem there too.
Add a new test file to verify the new code works. The old version
of the code made this test fail when run with the address
sanitizer. Without the sanitiser it tended to pass because the
following memory was typically set to 0 even though it was
uninitialised.
Type: fix
Signed-off-by: Paul Atkins <patkins@graphiant.com>
Change-Id: I2ec4afae43d296a5c30299bd7694c072ca76b9a4
|
|
Type: improvement
Change-Id: I21de21af6dea9e39df5e912e20e56d878a40659f
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Short message lengths are correctly handled by the code, asserting makes unit tests that verify this behaviour (e.g. test_ip_punt_api_validation) fail/crash with a debug image.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Ib3a377e5d49fde0eee252b92f0e58a8a0d0d83ec
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ia4d8aaafeb3629f421601edffefe9c61c3e69dba
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I68ada775810bb4a4f280962a979605b211562a52
|
|
Type: improvement
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I33a29cf11998736347eca5016eee112619d847c1
|
|
Type: improvement
Change-Id: Iab3d65b6276829ad1e522e66380d1797e37579b8
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: Ie5f2bdb8fb559680bab863a7c24a49360e005b58
|
|
Type: improvement
Change-Id: Ie4cdc6d8906da3d1cd18a8f1d7076283546d3003
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Change-Id: I2562ae5833b542c29bcd5025a9a6756e5de95a42
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Change-Id: I1bca733d2a35733275efa46ee0a23bf572365c74
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Change-Id: If4a7ac244832ef72d82c71b0277bc110b9500537
Signed-off-by: Stanislav Zaikin <zstaseg@gmail.com>
|
|
An unexpected packet that shows up on a Wireguard interace
that happens not to have a forwarding peer will cause a
segfault trying to index the vector of peers by adjacency.
Rather than segfaulting, recognize a non-adjacent packet
and drop it instead.
This leaves open the question of what _should_ be
happening to, say, IPv6 multicast packets.
Signed-off-by: Jon Loeliger <jdl@netgate.com>
Type: fix
Fixes: edca1325cf296bd0f5ff422fc12de2ce7a7bad88
Change-Id: Ic0a29e6cf6fe812a4895ec11bedcca86c62e590b
|
|
New dpdk version deprecates some macros used by VPP.
This patch changes them to 22.03 version.
Type: improvement
Signed-off-by: Dastin Wilski <dastin.wilski@gmail.com>
Change-Id: Ic362ed318dc1ad88bb682ef13fbd6159171fbaef
|
|
New version of dpdk changes some macros names.
This patch ensures VPP will be compatible with older dpdk versions.
Type: improvement
Signed-off-by: Dastin Wilski <dastin.wilski@gmail.com>
Change-Id: I3d9736278e70064610a1dcad5f2d2f6eb26e0d4b
|
|
Type: fix
Change-Id: I70f9ec2eb6c9c1494a4ecd56e06898f6162a0e0e
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Two similar CLI paths "nat44" and "nat44 add interface address"
caused unexpected behavior. If "nat44 add interface address"
command would fail the vlib cli processing function would
call "nat44" handler. This would also clean any previously
set errors from the first command and basically return
same error returned by "nat44" handler for every failed
command that starts with the same path string.
Fixes nat44-ed and nat44-ei plugin.
Change-Id: I1aac85c8ae2932da582a2b78243521d1bf8a0653
Ticket: VPP-2021
Type: fix
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Type: refactor
Change-Id: I5ca142ec1557d5b5c3806b43553ad9d3b5ea1112
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I609fb28e58286ff490d12384b03dd713830379b3
|
|
Type: refactor
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: Id485f525057163582dc7a83f7dab7a8b2e759270
|
|
Type: fix
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: If7d9c94dcdc32fa66763e18bd3be7d28b2d17946
|
|
Type: improvement
Change-Id: I84d594d8baaf18056580455f3b2790d0f31b7b0f
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
This commit only update is_equal flavours to use
_mm512_cmpneq_epi64_mask() but clang-format decided to also reformat the
whole block.
Type: improvement
Change-Id: I530cf91e8bceaf15022556f803b27de4f8583217
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: Ie647fb280831af23925c4b5f659f1dade6d37eff
|
|
Use of _vec_len() to set vector length breaks address sanitizer.
Users should use vec_set_len(), vec_inc_len(), vec_dec_len () instead.
Type: improvement
Change-Id: I441ae948771eb21c23a61f3ff9163bdad74a2cb8
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I5bd0b300af07424d1ce4807fa0b17e375001f089
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I8ba93643236aaa50eeb4755b74821a8c4ca6179b
|
|
vl_api_sw_interface_tx_placement_get_t_handler is autoendian.
So (contrary to most other uses) the context is in native order there.
Thus, send_interface_tx_placement_details needs to convert back
before using REPLY_MACRO_DETAILS5 macro.
Type: fix
Fixes: 0d05c0d214ffd326e531bea58f3c971bb9a58252
Change-Id: I00a3734cafa66d7d76c7edaea526a1eae0448ad9
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I7287e40ad95dfe061fd8a7b0e99921d5540e030d
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I5d4e68730a75337a2e532e72f366b62d6973235e
|
|
Type: refactor
Change-Id: I449fcea92a1c96dd7dd0bcad893060ad1c614351
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Fixes VPP invocation with relative path, i.e.:
$ bin/vpp unix interactive
Type: improvement
Change-Id: I0278710bb472b92e31389b2d28955c3d33550230
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Fix race with connects for iperf3 udp test.
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ief725b80047911e87ba24736dc0a60aa8bcdac50
|
|
Type: fix
Fixes: 500ba9f
Change-Id: I32872a084276d9b38ff07cdccccb746c0212777f
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Change-Id: Ia9f715f6074c72ff581fba1740273cfebe48c0f1
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: feature
Change-Id: I0f4e6517fcfa07ffb0aba89b159ac1337937a508
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: fix
Change-Id: I442496585fc24b7458535ad1a1d8db525c258540
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Type: fix
Signed-off-by: Emmanuel Scaria <emmanuelscaria11@gmail.com>
Change-Id: I41bb6e16735b77efa744b0368eed7dfa9583e960
|
|
Add simple counter statistics to VRRP, based on a subset of those
defined in RFC8347.
Add an update API that allows in-place modification of an existing
instance. The method returns a vrrp_index which can be used both for
retrieving statistics and to modify non-key parameters. Also add a
delete method which will take that vrrp_index as parameter.
Type: improvement
Signed-off-by: Emanuele Di Pascale <lele84@gmail.com>
Change-Id: I2cd11467b4dbd9dfdb5aa748783144b4883dba57
|
|
Type: fix
VLAN programming is currently enabled for IXGBE. However, that is only
supported for IXGBE_VF.
With this fix, disable VLAN programming for IXGBE.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I37b1d0733988c964d2b0f5a49328effacec1cb6f
|
|
Type: fix
This patch fixes the following DPDK plugin issue:
CID 253333: Control flow issues (DEADCODE)
The change also includes some cosmetic changes for error
handling.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Change-Id: I830020bc3ae9a508f3a905f78333fa3ae25ce784
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I2c264c31d2470b11b94d68411fa8266387319146
|
|
This patch affects how destination fib is choosen during session
creation. Default behavior of choosing fib based on output
interfaces is kept.
Configuration gives you the ability to change default behavior
to direct or restrict traffic between different FIB tables.
NAT specific VRF routing options:
a) keeping communication in the same VRF
b) option to add multiple destination VRFs
c) option to control the resolution order of destination VRFs
TX FIB resolution is based on looking up RX FIB entry in NATs
VRF table and picking the first FIB that resolves
destination address.
Ticket: VPP-2009
Type: improvement
Change-Id: If500c48d7ce3466533ad9581c0847870788fc4fb
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Set deprecated option on unsupported API calls.
Cleaned up API calls with deprecated option. Removed
in progress option from long term used API calls.
Removed obsolete/unused nodes, functions, variables.
Fixed set frame queue nelts function. Calling API
would incorrectly not fail even though frame queue nelts
can only be set before first call nat44_plugin_enable.
Moved all formatting functions to _format.c file.
Type: refactor
Change-Id: I3ca16e0568f8d7eee3a27c3620ca36164833a7e4
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Type: improvement
Signed-off-by: satna <satbeervarma9596@gmail.com>
Change-Id: I1b1db60fa1a0e47fce273bc07b01887813fd3c48
|
|
Type: improvement
Change-Id: Ic675ad4edbf27b7230fc2a77f00c90c46d6350c3
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Adds api that allows workers to synchronize through main thread.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I1e75e2fb5144d397d19b13c4dfc7e937f11c044c
|
|
Type: refactor
Change-Id: Ib2bf9f11209eb310b289b3202b2beeccc3637df0
Signed-off-by: Damjan Marion <damarion@cisco.com>
|