Age | Commit message (Collapse) | Author | Files | Lines |
|
some IGMP hashse use only a u32 key, which is not stored in the object, so don't use memory based hash
Change-Id: Iaa4eddf568ea0164bc2a812da4cc502f1811b93c
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Iaeb52d94cb6da63ee93af7c1cf2dade6046cba1d
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
DBGvpp# sh bier disp entry
DBGvpp# sh bier disp entry 0
No such BIER disp entry: 0
DBGvpp# sh bier disp table
DBGvpp# sh bier disp table 0
No such BIER disp table: 0
DBGvpp# sh bier disp table 11
No such BIER disp table: 11
DBGvpp#
DBGvpp# sh bier bift
no BIFT entries
DBGvpp# sh bier bift set 0
no BIFT entries
DBGvpp# sh bier bift set 0 sd 0 bsl 0
no BIFT entries
DBGvpp#
DBGvpp# sh bier fib
No BIER tables
DBGvpp# sh bier fib 0
DBGvpp# sh bier fib 0 4
DBGvpp# sh bier fmask
DBGvpp# sh bier fmask 2
No BIER f-mask 2
DBGvpp# sh bier imp
DBGvpp# sh bier imp 0
No such BIER imposition: 0
Change-Id: Ibadac3441dd8a6d1b96bd9ee4358e28498875b95
Signed-off-by: Neale Ranns <nranns@cisco.com>
(cherry picked from commit 8f6e3218623ddbb836d6a47ed2678f8ab99f2471)
|
|
Broken for years. Duh.
Change-Id: Ie5fb8e802f143aacd3301c45b136b24a8d4f6d74
Signed-off-by: Dave Barach <dave@barachs.net>
(cherry picked from commit ada24ea7012448b75d57ab87a6b7796c55bc44f5)
|
|
- hash is great. But it is a bit too slow for the DP. Use direct array indexing
to quickly retrieve the slave interface.
- the algorithm used by flow hash is great. But it is a bit too slow for the DP.
Use l2_hash_hash() extracted from lb_hash.h which ECMP is using. It makes use
of intrinsic crc32 instruction set.
- shortcut modulo arithmetic when the operand is 2**x (where x up to 4) to
avoid division instruction.
- special case for link count == 1 in bond_tx_fn()
- use clib_mem_unaligned to access data for the packet to avoid alignment error
- Fix some typos for packet tracing.
Change-Id: I8eae3ad497061c5473aa675ba894ee0211120d25
Signed-off-by: Steven <sluong@cisco.com>
(cherry picked from commit 0d88301a576191a0e330e539cf1dcb3837ee1bf6)
|
|
This reverts commit 6a4b97a6162994a5759ab1014fa2005439bb3ee3.
subsequent commit 01b2c23faecee4a60cccf8219bf37fa588009b8d added the same cache line alignment and resulted in a duplicate member causing a build failure.
Change-Id: I6208095afe0d5da2a85147e8f70c80035e49092e
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Object sizes must evenly divide alignment requests, or vice
versa. Otherwise, only the first object will be aligned as
requested.
Three choices: add CLIB_CACHE_LINE_ALIGN_MARK(align_me) at
the end of structures, manually pad to an even divisor or multiple of
the alignment request, or use plain vectors/pools.
static assert for enforcement.
Change-Id: I41aa6ff1a58267301d32aaf4b9cd24678ac1c147
Signed-off-by: Dave Barach <dbarach@cisco.com>
|
|
Change-Id: I63cedfac3dcb6dec380d02325eeebb1f35518309
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
When a DHCP client is in the bound state, it wakes up
halfway through it's lease (by default) to try and renew
the lease. The ip4-dhcp-client-detect is not enabled as
a feature at this point, so replies sent from the DHCP
server do not get applied to the lease. Eventually the
lease expires, the address is removed from the interface,
a new discovery is performed and the same address is added
back to the interface.
Before sending a request to renew in the bound state, enable
the feature to process the reply.
Change-Id: I95332ee0596f47df6f3c8bf8e3f0698dde9a1fc5
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
(cherry picked from commit 7cb7bb3fa1eca927cd33d8b434ce0eac1d57a987)
|
|
This patch addresses the changes in the JDK to build headers (javah no
longer available)
Change-Id: I3e94b1cf97c8c474535c26b75ea08379338fe0af
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
1 - use bit-map to re-use ID values and thus VLIB nodes
2 - free vrings
3 - free hw_address on HW interface delete (a HW * struct is memset on pool_get)
4 - free temporary node names during TX node setup
Change-Id: Id114c8bb9c844fd4ceb02fbbeb4b511ecfeb61ce
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
It is possible for span-input to get call with sw_if_index which is greater than
sm->interfaces and crashes in span_mirror () in the following line
span_interface_t *si0 = vec_elt_at_index (sm->interfaces, sw_if_index0);
For example, span-input mirrors a main interface as source, it may actually get
call for traffic coming in from the subinterface and crashes.
The fix is simply to check if sw_if_index >= vec_len (sm->interfaces) and
punt if it is.
Change-Id: I8312eb321d638518e14ba2326fffd1a7919646ca
Signed-off-by: Steven <sluong@cisco.com>
|
|
obvious leak of parent_indices
Change-Id: I572b33de1756c8062a87c754117d990622fe12fe
Signed-off-by: Kingwel Xie <kingwel.xie@ericsson.com>
|
|
Change-Id: I55f978c84a56bc089e5657c528195b6c84409364
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
[VPP-1251]
Problem:
When the bond subinterface is removed, it was observed that we lost the lacp
partner. Show hardware shows rx counter goes up, but show interface does not
for the slave interfaces.
Cause:
We reset the interface promiscuous mode when the bond subinterface is deleted.
This causes dpdk not to accept any packet. Leave the interface in promiscuous
mode fixes the problem.
Other fixes:
There are few places we use hw_if_index as if they are sw_if_index. But they
don't necessarily have the same value. As soon as a subinterface is created,
they start to diverge. The fix is to use the correct API for the hw_if_index
and sw_if_index.
Change-Id: I1e6b8bca0a4aae396d217a141271cbf968500c91
Signed-off-by: Steven <sluong@cisco.com>
|
|
We should be sending LACP PDU every second if the partner has LACP_TIMEOUT flag
set which means it will time us out in 3 seconds.
Add interface name for lacp trace
Change-Id: If7d816c062d03e80cc0dd7d10dba0b76ace0664a
Signed-off-by: Steven <sluong@cisco.com>
|
|
in more than one C file
Including the exports.h from multiple .c files belonging to a single plugin results in an error.
Fix that by making all the exported function pointers static, so every place
which includes the exports.h gets its own copy of function pointers.
This will also require to call separately the acl_plugin_exports_init() per file
to initialize them.
Change-Id: Icb70695efa23579c46c716944838766cebc8573e
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
https://gerrit.fd.io/r/#/c/7701/ accidentally removed 3 lines of code in
dpdk/device/init.c which were added by https://gerrit.fd.io/r/#/c/7826/
case VNET_DPDK_PMD_VHOST_ETHER:
xd->port_type = VNET_DPDK_PORT_TYPE_VHOST_ETHER;
break;
Those lines were needed to recognize vhost-user interface which is created
via vdev command in dpdk and display VhostEthernet. Without them,
UnknownEthernet is displayed.
Change-Id: I6d7ee6aecc6a415fbb7308595d515649475bcd5f
Signed-off-by: Steven <sluong@cisco.com>
(cherry picked from commit 684d08c7e5378af5310346e9219a79ef1d901084)
|
|
This patch addresses 182346, 182347, 182353.
Change-Id: I59c3d74bd3a2122b836c93e22ddb632fa032f7fe
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
(cherry picked from commit 216c35b2c6e5b4a728675f5141241420841cda34)
|
|
This patch addresses the warning 182994
Change-Id: I071f3cbdf9965c7b57d444f79430ee75c66c856e
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
Change-Id: I994649761fe2e66e12ae0e49a84fb1d0a966ddfb
Signed-off-by: Neale Ranns <nranns@cisco.com>
(cherry picked from commit 756cd9441752fc8f84104c9ee19099506ba89f85)
|
|
show vhost-user <interface> may cause a crash if interface is semi-bogus.
Semi-bogus means it is a known vpp interface which has a hw_if_index, but
it is bogus because it is not a vhost-user interface.
The fix is to add a check to reject non vhost-user interface for the
command.
Change-Id: I63f1e8bfbf46f5ec4c30f9fb3546982b63cd7cc5
Signed-off-by: Steven <sluong@cisco.com>
(cherry picked from commit 583f158b44d9644855441280e09afbf85a4557df)
|
|
Change-Id: Ie20aaf0eb1a5a338a54f0de4d6da661431be5163
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
It is a relatively rarely used low level command for code that didn't change,
but due to infra changes it did not survive. Having it working may be very
useful for corner-case debugging. So, fix it for working with
the acl-as-a-service infra.
Change-Id: I11b60e0c78591cc340b043ec240f0311ea1eb2f9
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Change-Id: I6400b77de388c01e85209e5dc5f11ccafb79a459
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
(cherry picked from commit 5aaea1186e4464c0bcbd165ead4b1782a35bb056)
|
|
In dpdk based bonding, when the bond interface is configured for l2,
it automatically sets the bond interface to promiscuous mode and sets rx
redirect to ethernet-input. This allows traffic to be bridged to
non compute node facing interface when it is received from the compute
node interface.
For native vpp bonding, we need to do similar things. When the bond interface
is configured for l2, we set the slave interfaces to promiscuous mode
and set rx redirect to ethernet-input because dpdk does not know anything
about the bond interface. Likewise, when a new interface is enslaved, we also
need to do the same thing if the bond interface has already been configured
for l2.
Change-Id: I7e168008e8a4221be74929b2a20e6db0ce8f3110
Signed-off-by: Steven <sluong@cisco.com>
(cherry picked from commit 4f8863b21405d1ab3e067e978a60be72a343358b)
|
|
Change-Id: I3700fc1d140e30da783e41762670618f0298c7db
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
(cherry picked from commit 1e583111ebeb0333435cfad8af10ebe0e9842d4d)
|
|
Change-Id: Id5a2a90d81cc9cb87cb6fb89ac2f4ca3cbcb51e2
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
(cherry picked from commit 9341e34b500ce7c68fc6857a24ee7b67cac121b1)
|
|
Change-Id: Iedc6bbaa1c0a1c3c6e1b8ed6d67db28046a551f4
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
(cherry picked from commit 58c711a196d9b178bfe6190964a7df92145cf949)
|
|
Adopt nova naming convention for vhost-user interfaces.
Change-Id: If70f0828106bf594eb11d4f0ed2898a35ec0af15
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
(cherry picked from commit 47cca9b0f2a406a4494e646c4c4cd37abb47053a)
|
|
only in lookup context 0
In process of extracting the matching out of the ACL plugin internals,
a couple of pieces setting the miscellaneout fields in the 5tuple structure
did not make it, so they are initialized to zeroes. Move the assignments
to the right place to make both traffic acls and acl-as-a-service working.
Change-Id: I66a7540a13b05113b599f0541999a18fad60385d
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
While https://gerrit.fd.io/r/#/c/11316/ took care of 1 packet/frame for
most of the bonding modes, it missed the broadcast mode. This patch is
to fix the 1 packet/frame for the broadcast mode.
Change-Id: Iac48a2977c7f702f341479cc712a6448090dbc60
Signed-off-by: Steven <sluong@cisco.com>
(cherry picked from commit 22b5be06fae6f9a8b71c53fec548aabbdf69026b)
|
|
Prior to this fix vppapigen would just do a crc32 on the Python representation
of the file as a set of dictionaries. That of course was not a good idea.
Change-Id: Ie454736ffec02fa4679ab27e684b1d6c6406a0f1
Signed-off-by: Ole Troan <ot@cisco.com>
(cherry picked from commit 17225df81b6fbfedc49dbf1fccb6d68df5a44ce0)
|
|
Change-Id: I0efd03bdb84bc9ff2334d398bfdb82486228114a
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
(cherry picked from commit 7bf3f9f70e8395c13ed235cb48ec1787b07cf2d9)
|
|
Change-Id: I50ff0cacf88182f8e0be19840c50f4954de586e2
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
(cherry picked from commit 87dad11c8717735479e57cf6c065c7a7963c3aa3)
|
|
If l2-fwd node does not find an L2FIB entry for DMAC of packet,
use input feature bitmap to find next node instead of always
sending packet to l2-flood node to perform unknow unicast flood.
It provides possibilty of using other feature to forward unknow
unicast packet instead of flooding the BD.
Change-Id: I56b277050537678c92bd548d96d87cadc8d2e287
Signed-off-by: John Lo <loj@cisco.com>
(cherry picked from commit 9a719298c3160b0c28aa7d74747ef206751c8cae)
|
|
using the inline functions
The acl_main struct, which is defined in the acl_plugin, is not visible when
the ACL plugin inline code is being compiled within the context of other plugins.
Fix that by using the global pointer variable, which exists in both the ACL plugin
context and is set in the context of the external plugins using ACL plugin.
Change-Id: Iaa74dd8cf36ff5442a06a25c5c968722116bddf8
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
The users of ACL lookup contexts might not check the data they supply,
so do it on their behalf in this function, and return an error if
an ACL does not exist or if they attempt to apply the same ACL twice.
Change-Id: I89d871e60f267ce643f88574c83baf9cd0a2d7b3
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Change-Id: I71660eb327124179ff200763c4743cc81dc6e1c6
Signed-off-by: Matus Fabian <matfabia@cisco.com>
(cherry picked from commit f13a8787365300d757eca4624c8f8a6b7c49392b)
|
|
Change-Id: Id775efb2e85d850e510d00f1b48bb711a3342397
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I78a4176f98c2b4630a57ac5ddb7faf58ba0c4ee1
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I2b1d1035f810cb58356626cf081d46eb289265b4
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ibcffee7d20dbb79720199bcd82d2353f39d5544f
Signed-off-by: Chris Luke <chrisy@flirble.org>
|
|
Change-Id: I65306fb1f8e39221dd1d8c00737a7fb1c0129ba8
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Use device-input and interface-output feautre arcs to collect unicast, multicast
and broadcast states for RX and TX resp. Since these feature arcs are present only
for 'physical' interfaces (i.e. not su-interfaces) counter collection is supported
only on parent interface types.
Change-Id: I915c235e336b0fc3a3c3de918f95dd674e4e0e4e
Signed-off-by: Neale Ranns <nranns@cisco.com>
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: Ia99490180683e8649784f7d9d18c509c3ca78438
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I32b30210c2f1aec10a1b614d04f427662326a3d2
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: Ifb4d23059b7989c32a52eaf0c25c275b35e83010
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
dpdk-input was dropping packets with bad ip-checksum on l2 interfaces
Change-Id: Ife5b52766bb71e878b1da6e94ae7b8a1e59fc478
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
This change fixes a bug which would corrupt features infra by making
feature infra resistant to double-removal. It also fixes 'out of memory'
issue by properly initializing the bihash tables.
Change-Id: I78ac03139234a9a0e0b48e7bdfac1c38a0069e82
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|