Age | Commit message (Collapse) | Author | Files | Lines |
|
Change-Id: Ic2f2dc234199a5f882846880cbacff20fc8d477b
Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
|
|
definition
Change-Id: I488d7c2b864c0e3661c8abf0363e4b97984d4974
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Change-Id: I15813167e7c8529f229143de4a8f64f0fb530951
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: If35171005e409f77bed4cc16eccb66a85aae5dfb
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
l2_classify memeber table_index was overlaid over l2.l2fib_seq_num
which over written when table_index gets initialized in l2_input_classify
solved by overlaying both table_index and opaque_index as only one is used
seperated l2fib seq num from l2_input configs
for better handling of theoretical ABA issue where an entry for a deleted
interface is considered valid by the ager because a different interface with
same sw_if_index and seq_num was created before the ager got a chance to delete
Change-Id: I7b0eeded971627406f1c80834d7e02c0ebe62136
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Disable CLI/API commands instead of error message on startup.
Change-Id: I313ed6e2ea009f573afb5e08b0e85ed1f9091dc3
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
In IP mode memif interface is L3 point-to-point interfaces and
we don't pass l2 header. There is no l2 header rewrite operation and
received packets are sent straight to ip4-input / ip6-input nodes.
Change-Id: I4177f3fce3004da7ecf14d235006ae053fcf3f09
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
- limit minimum rto per connection
- cleanup sack scoreboard
- switched svm fifo out-of-order data handling from absolute offsets to
relative offsets.
- improve cwnd handling when using sacks
- add cc event debug stats
- improved uri tcp test client/server: bugfixes and added half-duplex mode
- expanded builtin client/server
- updated uri socket client/server code to work in half-duplex
- ensure session node unsets fifo event for empty fifo
- fix session detach
Change-Id: Ia446972340e32a65e0694ee2844355167d0c170d
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ic81c6098d615fdb6a874e532921efd833fed872c
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Add a bihash-based ACL lookup mechanism and make it a new default.
This changes the time required to lookup a 5-tuple match
from O(total_N_entries) to O(total_N_mask_types), where
"mask type" is an overall mask on the 5-tuple required
to represent an ACE.
For testing/comparison there is a temporary debug CLI
"set acl-plugin use-hash-acl-matching {0|1}", which,
when set to 0, makes the plugin use the "old" linear lookup,
and when set to 1, makes it use the hash-based lookup.
Based on the discussions on vpp-dev mailing list,
prevent assigning the ACL index to an interface,
when the ACL with that index is not defined,
also prevent deleting an ACL if that ACL is applied.
Also, for the easier debugging of the state, there are
new debug CLI commands to see the ACL plugin state at
several layers:
"show acl-plugin acl [index N]" - show a high-level
ACL representation, used for the linear lookup and
as a base for building the hashtable-based lookup.
Also shows if a given ACL is applied somewhere.
"show acl-plugin interface [sw_if_index N]" - show
which interfaces have which ACL(s) applied.
"show acl-plugin tables" - a lower-level debug command
used to see the state of all of the related data structures
at once. There are specifiers possible, which make
for a more focused and maybe augmented output:
"show acl-plugin tables acl [index N]"
show the "bitmask-ready" representations of the ACLs,
we well as the mask types and their associated indices.
"show acl-plutin tables mask"
show the derived mask types and their indices only.
"show acl-plugin tables applied [sw_if_index N]"
show the table of all of the ACEs applied for a given
sw_if_index or all interfaces.
"show acl-plugin tables hash [verbose N]"
show the 48x8 bihash used for the ACL lookup.
Change-Id: I89fff051424cb44bcb189e3cee04c1b8f76efc28
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Change-Id: I83a6c277fa211ac2c2ca2d603650c992886af0a7
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: Id160346ebf533ee5f55bd735803624a75ed997b9
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Add optional keywords to show memif to allow display a particular
interface and option to display the descriptor tables. The new syntax for
the show memif command is now
show memif [<interface>] [descriptors]
Change-Id: I20696bbea1142bdc152b6e351c6ece24b1cf5500
Signed-off-by: Steven <sluong@cisco.com>
|
|
Current memif interface supports frame size up to 2048. This patch is to
enhance memif to support jumbo frames.
On tx (writing buffers to the ring), keep reading the next buffer in vlib
when the flag VLIB_BUFFER_NEXT_PRESENT and merge it to the same ring entry.
Use descriptor chaining if the buffer is not big enough.
On rx (reading buffers from the ring), if the packet is greater than 2048,
create multiple vlib buffers, chained with the VLIB_BUFFER_NEXT_PRESENT.
Testing:
Because the ping command provided by VPP does not support jumbo frames,
I have to use linux ping. Here is the set up that I use for testing.
VM1 --- vhost ---- VPP1 --- memif --- VPP2 --- vhost --- VM2
Create vhost-user interfaces between VM1 and VPP1 and between VPP2 and VM2
VM configuration:
Set the interface mtu on the VM, e.g 9216 to support jumbo frames.
create static route and static arp on VM1 to VM2 and vice versa.
Use iperf3 or ping -s 8000 from VM1 to VM2 or vice versa.
Sample run
sluong@ubuntu:~$ ping 131.1.1.1 -c1 -s 8000
ping 131.1.1.1 -c1 -s 8000
PING 131.1.1.1 (131.1.1.1) 8000(8028) bytes of data.
8008 bytes from 131.1.1.1: icmp_seq=1 ttl=62 time=0.835 ms
--- 131.1.1.1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.835/0.835/0.835/0.000 ms
sluong@ubuntu:~$
DBGvpp# sh interface memif0
Name Idx State Counter Count
memif0 1 up rx packets 1
rx bytes 8042
tx packets 1
tx bytes 8042
ip4 1
DBGvpp#
Change-Id: I469bece3d45a790dceaee1d6a8e976bd018feee2
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: I9999474c1a4b744f5d5880ee99a0293c576f2819
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Change-Id: I25ccf8260dbe7e1550aee3904a688fc135ce1f03
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I2b78dad740b67fc05b0e2cf9c180809bc0962cd5
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Iab2aa5fd92b9e95049f55fce4177e236a482723c
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Id1139533c41cabef48394b5d79750608e0b74179
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
A bihash-per-interface is convenient, but turns out tricky difficult from
the maintenance standpoint with the large number of interfaces.
This patch makes the sessions reside in a single hash table for all the interfaces,
adding the lower 16 bit of sw_if_index as part of the key into the previously
unused space.
There is a tradeoff, that a session with an identical 5-tuple and the same
sw_if_index modulo 65536 will match on either of the interfaces.
The probability of that is deemed sufficiently small to not worry about it.
In case it still happens before the heat death of the universe,
there is a clib_warning and the colliding packet will be dropped,
at which point we will need to bump the hash key size by another u64,
but rather not pay the cost of doing that right now.
Change-Id: I2747839cfcceda73e597cbcafbe1e377fb8f1889
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Change-Id: I034efb9fc3ebb846c0aef07b18c1f110b8cbf3e3
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
The previous iteration of the code used the L2 classifier tables for session storage,
as a result, the table allocations were pretty big. The new ACL plugin
datapath uses the tables just as a redirection mechanism, without adding any
entries. Thus, the tables can be much smaller.
Change-Id: Ieec4a5abf0abda6e513ab4e675f912f14d47e671
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Best guess, tested carefully, should do no harm. Clang doesn't
complain either way; it's not certain that this patch will make the
coverity warnings in tw_timer_template.c disappear.
Change-Id: I75aa0cfd8970751e823a1165df2a755e947c4cf9
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
l2_len was not updated for the third tag
as the ethernet node retracts by the vlan count after parse_header (using
ethernet_buffer_header_size) it ends up pointing before the ethernet header
+ some minor cleanups
Change-Id: I4ccaedd33928912e5d837376f146503b27071741
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Change-Id: I7dedf283c83c7f0e0b7642f095b68bc0b40898cf
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I5077fcf3671a6116b475f87e43120efc10ecaa08
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: Ide6d26d6fcc81be6f26ac0abe2cd0d6a0838cfe6
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
after deleting a sub interface it's l2fib entries are left with a dangling
sw_if_index (while waiting for the ager to delete them).
changed "show l2fib" to reflect that state with "Deleted" as the interface name.
added sleep in test_l2_fib as a workaround for packets still passing after flush
will investigate...
Change-Id: Id998d7d3c6a073ef5005c5f3009e1cfb7febf7db
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
prep work for s/timing_wheel/tw_timer/ in the vlib process model
Change-Id: I763f4968a8fce1764a3778b12def0afbd30086b1
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I4d41def83a23f13701f1ddcea722d481e4c85cbc
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I0ab0e3e40b00ed5c2a34f5c23d04b596c1e9aa5f
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
ICMP to ICMPv6 error message inner UDP packet translation
delete ST entries when deleting static BIB entry
Change-Id: I2a28631ac040e20827a692331506cd8254f70916
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
crc_u32 was not defined for non x86_64 with SSE4.2 processors.
Calls to "crc_u32" are removed and replaced by either a call to
clib_crc32c or a call to clib_xxhash, as the result is not used
as a check value but as a hash.
Change-Id: I3af4d68e2e5ebd0c9b0a6090f848d043cb0f20a2
Signed-off-by: Christophe Fontaine <christophe.fontaine@enea.com>
|
|
Change-Id: I08544b2f06f993c8a6435901232a0616d0548b94
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: Ib62ee0eacd6c91dc4cd95835efe901079754ef42
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Change-Id: I7f85870ef99405727312a5de6839c8875c9fa1c5
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I70fb60619a0a02d891276ea6c7ac277ba2b26fa3
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
- refactor existing congestion control code (RFC 6582/5681). Handling of ack
feedback now consists of: ack parsing, cc event detection, event handling,
congestion control update
- extend sack scoreboard to support sack based retransmissions
- basic implementation of Eifel detection algorithm (RFC 3522) for
detecting spurious retransmissions
- actually initialize the per-thread frame freelist hash tables
- increase worker stack size to 2mb
- fix session queue node out-of-buffer handling
- ensure that the local buffer cache vec_len matches reality
- avoid 2x spurious event requeues when short of buffers
- count out-of-buffer events
- make the builtin server thread-safe
- fix bihash template threading issue: need to paint -1 across uninitialized
working_copy_length vector elements (via rebase from master)
Change-Id: I646cb9f1add9a67d08f4a87badbcb117980ebfc4
Signed-off-by: Florin Coras <fcoras@cisco.com>
Signed-off-by: Dave Barach <dbarach@cisco.com>
|
|
Added some user documentation to sample plugin.
Change-Id: I518910f80499307e8fcac8dcef7baaeab5ea8e35
Signed-off-by: Ray Kinsella <ray.kinsella@intel.com>
|
|
Change-Id: Ibd57cb617642e42d4c4d64f186479702b8a81900
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
CID 170475
Change-Id: I9748dd56bdcb62e68d8f672e5b1619a3be400b8f
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
|
|
Added ICMP error messages translation.
Added check for multi thread (not supported yet, so init failed).
Added API definition for custom NAT64 refix.
Change-Id: Ice2f04631af63e594aecc09087a1cf59f3b676fb
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: I971c110ed126f1a24a963f9d3b88cf8f8c308816
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Change-Id: Ic3c9a914a588824b8abd6668961f731432083c4f
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Change-Id: I744e7d64d94dbb302f2c1246663480f720672ee2
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
API for P2P Ethernet feature
Change-Id: Id0280f42b9ce2428262e79c4dc309595037cd10e
Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
|
|
Basic NAT64 feature (no hairpinning, no multi-thread).
Change-Id: I392fccbce93e70c117f4a9a7ec7cf08d6c537f2d
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: I6a566d1dc9531b790bdcb00edc73516f86daeb72
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Icffd2862eadbe9ddfb3ee34f3cb19c9324b3d9b4
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
code use it
This fixes the undesirable pause in the dump commands in case there is nothing to dump.
Change-Id: I0554556c9e442038aa2a1ed8c88234f21f7fe9b9
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|