aboutsummaryrefslogtreecommitdiffstats
path: root/src
AgeCommit message (Collapse)AuthorFilesLines
2018-09-25vmxnet3: guard against array overflowSteven1-2/+3
Under extreme condition, it is possible for input node to have more than 256 packets available to process. Add a check to the while loop to prevent overrun buffer_indices and nexts. Change-Id: Id9830e5c254f04216eb79e864a5460e08cf2e4e5 Signed-off-by: Steven <sluong@cisco.com>
2018-09-25NAT44: fix nat44_o2i_ed_is_idle_session_cb (VPP-1424)Matus Fabian2-4/+1
Change-Id: I47e1fc789ddf3dbfdf9768b99d5c3a8804d6b750 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-09-24NAT44: endpoint-dependent mode session timeout improvement (VPP-1423)Matus Fabian4-27/+63
Change-Id: I630f3da1ea4e6e50a50f1352c097becef1efe3c0 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-09-24nsim: fix multiple definitions of nsim_nodeDamjan Marion2-3/+1
Change-Id: Iedd79eeba35fb7385c03a177f8ac7d3ddfeb6a84 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-09-24svm: march svm_fifo take 2Florin Coras2-71/+46
Change-Id: Ifa4fceef7edbe43d444790a624957db0817064de Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-09-24avf: rename interface nameDamjan Marion2-2/+2
Change-Id: I4a1dca92a69547f8b26e9aec7574332f39e43c37 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-09-24ARP: don't use RPC for requests initiated from the main threadNeale Ranns2-114/+87
Change-Id: If833680149eb33db6adc836c5330f350042869f4 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-09-24Network delay simulator pluginDave Barach10-0/+1523
Change-Id: I4a70c7df8f0cb368a4e1cb16f30eeef5c6058c79 Signed-off-by: Dave Barach <dave@barachs.net>
2018-09-24Trivial: Clean up some typos.Paul Vinciguerra120-249/+249
Change-Id: I085615fde1f966490f30ed5d32017b8b088cfd59 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-09-24LB: fix flush flow table issueHongjun Ni5-69/+90
Change-Id: Ib0a06ab71aed42eb5bb2ab2edf4844b2167e0610 Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2018-09-22vcl: remove vcl_eventFlorin Coras8-1062/+0
Change-Id: I0f805ae47f6e9465070a54d85f164bc74877af01 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-09-22fix following error in debian jessie:Khers1-3/+6
'‘for’ loop initial declarations are only allowed in C99 or C11 mode' Change-Id: Id842382f884122555abaa936c56cdfd305f2a5f3 Signed-off-by: Khers <s3m2e1.6star@gmail.com>
2018-09-21vmxnet3: Add hardware link status handlingSteven6-8/+66
Added an interrupt line for monitoring and notifying hardware link status Displayed additional information for show hardware for vmxnet3 interface Fixed possible garbage display on interface name for show vmxnet3 Change-Id: If457bfe7c216287fb3a4e2630f00434d595f387b Signed-off-by: Steven <sluong@cisco.com>
2018-09-21NAT: Refactoring / Housekeeping (VPP-1415)Matus Fabian19-10848/+11482
Change-Id: Ia3ce24cc94f9b2fb331ad62a4181ddcd41bc78ca Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-09-21Add more CLI options to vpp_api_test for calling ip_add_del_routeJohn Lo2-5/+17
Change-Id: I114e93b6bc71cfcdcfe6d3ddde26f77118e36ab8 Signed-off-by: John Lo <loj@cisco.com>
2018-09-21tcp: accept fin-ack in syn-rcvd stateFlorin Coras1-1/+3
Change-Id: Ibe57abc7d2a06be80146ce28edf4c60ecda991eb Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-09-20vhost: show vhost may display garbage after the interface nameSteven1-2/+3
DBGvpp# show vhost-user Virtio vhost-user interfaces Global: coalesce frames 32 time 1e-3 number of rx virtqueues in interrupt mode: 0 Interface: VirtualEthernet0/0/0�?x�D (ifindex 3) The fix is to use format_vnet_hw_if_index_name rather than hi->name. The former format the name with %v rather than %s Change-Id: If4d275e1eb249cf87b2d6b796b42f24769f9e3e3 Signed-off-by: Steven <sluong@cisco.com>
2018-09-20bihash template: avoid memory leak upon rehashAndrew Yourtchenko1-0/+3
Call the BV (value_free) when we have performed the rehash and thus no longer need the memory that old value for the bucket refers to. Change-Id: Ibb82174fc8002aeb3e1a6c8d1f90293d73bc45d8 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-09-20rename vpp-dpdk-dev to vpp-ext-depsDamjan Marion1-0/+1
We need to have new tenants in the development package. This is first of series of patches which will allow us to have multiple external libs and tools packaged for developer's convenience. Change-Id: I884bd75fba96005bbf8cea92774682b2228e0e22 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-09-20UDP-Encap: name counters for the stats segmentNeale Ranns9-214/+143
change the ADD api so that is returns the 'ID' that can be used by the client to read the stats from the stats segment and to delete the object. Previously a similar value used required to be chosen by the client, now VPP allocates one (like it does e.g. for interfaces) Change-Id: I563cf6092276eb990c52d5457c86e72546bcf69e Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-09-20SR-MPLS: MPLS table checks (VPP-1422)Neale Ranns1-0/+17
Change-Id: I397715ea8c1966f5ee61128f284d62d875c568e1 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-09-20session/svm: add want_tx_event flag to fifoFlorin Coras6-36/+42
Have applications use explicit flag to request events from vpp when it transmits from a full fifo. Change-Id: I687c8f050a066bd5ce739d880eaec1f286038d95 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-09-20Route counters in the stats segmentNeale Ranns10-85/+174
route ADD API changed to return the stats segment index to use to read the counters Change-Id: I2ef41e01eaa2f9cfaa49d9c88968897793825925 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-09-20vhost-user: Add disable feature support in apiMohsin Kazmi4-2/+30
Two flags to disable mergable rx buffers and indirect descriptors are added to api. Change-Id: Iba0ee9c48d19dfc3d3420a3fdaf44a1a1d325e99 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2018-09-20NAT44 virtual fragmentation reassembly for endpoint-dependent mode (VPP-1325)Juraj Sloboda6-147/+1296
Change-Id: I36ece2ef2eaef9fa559d69ec7f7f07e7c16a7a9d Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2018-09-20vmxnet3: invoke vlib_buffer_enqueue_to_next() with the wrong buffers for ↵Steven1-7/+8
chain buffers If we invoke the subject API with 2 buffers, each with 2 chains, the content of buffers[0] should be head of 1st buffer, and content of buffer[1] should be head of 2nd buffer. What the code did was to put buffers[0] = head of 1st buffer buffers[1] = next chain of 1st buffer buffers[2] = head of 2nd buffer buffers[3] = next chain of 2nd buffer This is wrong and can cause crash. The fix is to only increment bi when the entire packet is found which may consist of multiple fragments. Change-Id: If02cd5186a039d7a6c08a0959112840bdb242317 Signed-off-by: Steven <sluong@cisco.com>
2018-09-19bihash template: reinstate the check for the available memory in the arenaAndrew Yourtchenko2-3/+3
ffb14b9554afa1e58c3657e0c91dda3135008274 has changed the semantics of alloc_arena_next to become an offset off alloc_arena, but in the available memory check in BV (alloc_aligned) it still treats it as a virtual address, resulting in the check always succeeding, thus over a prolonged period bihash arena allocator potentially overwriting whatever is following the arena. Change-Id: I18882c5f340ca767a389e15cca2696a0a97ef015 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-09-19GRE: fix 4o6 and 6o4 adj stackingNeale Ranns4-20/+24
Change-Id: I13dc5eab8835c4f3b95906816d42dccfeee8b092 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-09-19dpdk: mask and warn if rx/tx offload is not availableDamjan Marion4-94/+115
Warning messsage is displayed in system log: vpp# show log 1970/ 1/ 1 01:00:01:198 warn dpdk unsupported rx offloads requested on port 0: scatter Change-Id: I40021066daf2d37ca5233e3adce55e412f0d3932 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-09-19L2-fib-dump: send 1 or 0 rather than flag valueNeale Ranns1-3/+3
Change-Id: I487b3b480347f60ffe3af4029adfb22b6700cea7 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-09-19socket api: do not delay sending of messagesFlorin Coras3-64/+42
Instead of relying on main epoll loop to send messages, try to send as soon as possible. Change-Id: I27c0b4076f3599ad6e968df4746881a6717d4299 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-09-19nat: free port_bitmapdongjuan1-0/+7
Change-Id: Ied0fc50f1afb0f7fc563784544699726a6d03380 Signed-off-by: dongjuan <dong.juan1@zte.com.cn>
2018-09-19session: improve close procedureFlorin Coras6-19/+56
Change-Id: I6201a044e70ab6a58db8212960c57edc77c41f96 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-09-18Fix documentation for SHG in bridge domainYichen Wang1-1/+1
Change-Id: If094971cf011d09fa0daf3ff393f490e584c1151 Signed-off-by: Yichen Wang <yicwang@cisco.com>
2018-09-18vmxnet3: add support for "non-default" next nodeSteven3-2/+76
Support feature arc Support set interface next node Enqueue packet to either ip4, ip6, or ethernet_input based on packet type Change-Id: I11fb6bba98ee0bfa1d057474fc6cf3be48ef1c48 Signed-off-by: Steven <sluong@cisco.com>
2018-09-18disable scatter/gather for ENA with DPDK 18.08Matthew Smith1-1/+5
The scatter/gather rxmode flag was set for ENA when building against DPDK >= 18.08. ENA does not support this, so disable it. It looks like enabling it was a copy/paste error. Also, after offloads are adjusted based on whether "no-multi-seg" is set, those configurations are overwritten by copying port_conf_template over the port config. That should only happen for versions of DPDK older than 18.08 because 18.08 and newer make changes directly on the port config instead of making changes to the template. Make the clib_memcpy() conditional on the DPDK version being less than 18.08. After doing so, compiler errors complain about port_conf_template being declared but not used, so make it's declaration conditional. Change-Id: If81980d71c379a565b51dd700b953f8c811a8703 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2018-09-18STATS: First go at documentationOle Troan1-0/+129
Change-Id: I4d586456c46994b60ff7670d1411997a3615a284 Signed-off-by: Ole Troan <ot@cisco.com>
2018-09-18svm: better march support for svm fifoFlorin Coras2-96/+87
Change-Id: I6a4335654882a2ca66d3d465e35e350868242b8d Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-09-18STATS: Optimistic concurrency handling in Python library.Ole Troan1-4/+24
Change-Id: I2135f3e77206fd171636a1e0b07c373c0bf093e4 Signed-off-by: Ole Troan <ot@cisco.com>
2018-09-18STATS: Add Python 3 support to vpp_stats.py.Ole Troan2-4/+4
Change-Id: Iad0b0315fbd493b67e6ca490206ec8e8422790ea Signed-off-by: Ole Troan <ot@cisco.com>
2018-09-17STATS: Dynamically mapped shared memory segmentOle Troan17-685/+769
Move from using a hash to a vector with offsets into shared memory. Limit exposure of VPP data structures and include files to external stats library and applications. Change-Id: Ic06129f12d10cf4c4946a86d9bc734eacff2c7da Signed-off-by: Ole Troan <ot@cisco.com>
2018-09-16Register cdp_input when enabled for the first timeDave Barach3-26/+42
Graceful handling of unknown tlv types Change-Id: Idbc9ed524fc8b865c8e12571813cc73548bde480 Signed-off-by: Dave Barach <dave@barachs.net>
2018-09-16vmxnet3: fix clang initialization errorFlorin Coras1-1/+2
Change-Id: I2958bd3bdec98d3e380a8ff8f970563020e28afd Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-09-16fix nsh map index error, it will cause vpp appear Segmentation fault when ↵zhanglimao1-1/+1
vpp process double packages Change-Id: Ib32bb351356b84aaf696c57398610b52a5a1f4dd Signed-off-by: zhanglimao <zhanglimao0017@gmail.com>
2018-09-15tls: fix openssl engine write complete conditionFlorin Coras1-1/+1
Change-Id: Ic1526f6916970ce2b0c4fc0d148d4396fa629b5f Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-09-15session: ensure detach is done with worker barrierFlorin Coras1-7/+12
Change-Id: I98a79f2c3b0268c414dd295c7ebfc561ce049d4b Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-09-15tls: use application interface apisFlorin Coras1-15/+23
This also exposes app to tls sessions. As a result "sh session verbose" will show for each tls session both the application's session (app to tls) and the tls session (tls to tcp). Change-Id: I1e65c63362ce58f314e762d7db78b44479e1e3a5 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-09-14vmxnet3 device driverSteven Luong14-0/+3173
Implemented vmxnet3 deivice driver for VMWare ESXi. Tested with Ubuntu 18.04 connected to ESXi 6.0 Ubuntu-18.04 (VPP) --- ESXi-6.0 Change-Id: I85fbc86f2d8532b017bc4271612d17e24e498e4d Signed-off-by: Steven Luong <sluong@cisco.com>
2018-09-14BIER API and load-balancing fixesNeale Ranns13-72/+257
Change-Id: Ibda19d786070c942c75016ab568c8361de2f24af Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-09-14Remove scaffoldingDave Barach2-14/+1
Change-Id: I4acebbf76556428bb45356c8e5b85c72a85a1656 Signed-off-by: Dave Barach <dave@barachs.net>