Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: feature
To avoid excessive bursts, pacer must be provided with an estimated rtt
for the connection. That's used to compute an idle timeout, i.e., time
after which the bucket is reset to 1 mtu due to inactivity. For now,
idle timeout is computed as 5% of the rtt.
Change-Id: Ia0b752fe7b4ad0ce97b477fb886b0133a2321541
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Finish the feature, and fix a couple of doc bugs
Type: feature
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I2c62745fda137776204c8fc4fca0e7e288051573
|
|
Type: test
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: If31f4b50da7a6e4a9704ceb3415c582143c08355
|
|
Type: fix
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: If41f154c354772f5b32cfd35ea231b8f59c2c0c5
|
|
Type: fix
Change-Id: I6f25d9295b973ab7133071b6dc325ecd86386898
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
traffic selector vector isn't freed when freeing child SA
Type: fix
Change-Id: Icf6c240db5093f45d141451bad6f6627a61821cf
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: fix
Ticket: VPP-1771
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I48854befbd3d1514ad8b41ac5b194259c2a577a4
|
|
Type: feature
Adding:
VNET_FLOW_TYPE_IP4_GTPC
VNET_FLOW_TYPE_IP4_GTPU
VNET_FLOW_TYPE_IP4_GTPU_IP4
VNET_FLOW_TYPE_IP4_GTPU_IP6
VNET_FLOW_TYPE_IP6_GTPC
VNET_FLOW_TYPE_IP6_GTPU
VNET_FLOW_TYPE_IP6_GTPU_IP4
VNET_FLOW_TYPE_IP6_GTPU_IP6
in this patch
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I4ad53895b5ac0771432bb039b8c79e48e3c19f25
|
|
Type: feature
Change-Id: I7dcc8c6911d02729b3bda1b3a21a211c82c3b949
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Change-Id: I689649ad163e76fecdabe96a8c2be5be3068ffde
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: fix
Change-Id: Ic67d9da65d937f56ecf994a5504c6351624b32ff
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: feature
Change-Id: Iac8d4ed4997c4fce802589585e6a9424957152ca
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: fix
Change-Id: I38a5cbd53b278c21142bac4ee1bbe5dc8bcaaac9
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: fix
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: Ia4b1eb3c704374e27b260d88ae6ab628754468d3
|
|
Type: fix
Change-Id: I522db62db50fc0fa46a6dd7cddd32e2f09b5e5a6
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: fix
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: Ia28cf193f7fed2a1702774f3f74f505cc7bad954
|
|
Type: fix
Change-Id: Ic221cd4fcad89aece71239ed96152bf0311f3286
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: feature
Change-Id: I7f64fb1a13d90fa1679ca2ca35206092682f0c8f
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: feature
Plug-in for IPv6 Segment Routing Mobile
This funcion was developed by
Signed-off-by: Satoru Matsuchima <satoru.matsushima@gmail.com>
Signed-off-by: Filip Varga <filipvarga89@gmail.com>
Signed-off-by: Tetsuya Murakami <tetsuya.mrk@gmail.com>
Signed-off-by: Tetsuya Murakami <tetsuya.mrk@gmail.com>
Change-Id: Ie995adc73d8f8d444339aab71619c3599e69f12d
Signed-off-by: Tetsuya Murakami <tetsuya.mrk@gmail.com>
|
|
ip4_map_get_domain returns d0 = 0 in case of no domain,
and sets error MAP_ERROR_NO_DOMAIN. Rearrange the clauses
in the logical check that relies on dereferencing d0
such that boolean shortcutting takes care of not
referencing the null pointer.
Change-Id: I378adc120836ea920fc530808ac3c1f98ab8d593
Type: fix
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Type: fix
Ticket: VPP-1747
Change-Id: If282aae3e584d7017c200f897b99c8a37eb1b2e5
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Original MSS clamp patch by Vladimir Ratnikov.
Modified to apply only to TCP packets.
Type: fix
Test: Wrote new unit test to ensure MAP-E TCP MSS clamping.
Change-Id: I77c69714a2e3cc3b7473aa12b645243bb595c2a2
Signed-off-by: Vladimir Ratnikov <vratnikov@netgate.com>
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
Type: feature
For some deployments(mobile traffic) we need few extra bytes of space
Signed-off-by: Srikanth Akula <srakula@cisco.com>
Change-Id: I3367561dc23dbb8b266dea583e23b9430fd7dcab
|
|
Type: fix
Adding few extra checks while doign session validationwq!
Signed-off-by: Srikanth Akula <srakula@cisco.com>
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I4d18b5ad97d1802ce38a07aeb56b5f35939c1187
|
|
Type: test
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I2dc4c09730f77931a2b484a6dd5dc669068f8e57
|
|
Add vl_client_connect_to_vlib_thread_fn (...) and export the
memory_client_main_t definition.
If you use this new API, make sure not to miss the setjmp / longjmp
dance shown in .../src/vlibmemory/memory_client.c:rx_thread_fn(...),
which is required for the rx pthread to terminate cleanly; please
process client delete reply messages in the rx thread...
Type: refactor
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Ia67038ec59e2e14b174c67afca15b2c3f67a4d20
|
|
Type: fix
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I6bb6c6be62f98ac9a059469c81a5f4476b96e96e
|
|
Type: docs
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I75d1efc503135bdc224f563b4e02b449904bfa08
|
|
Type: fix
Change-Id: Ia3dacd2628591f7ba9710e8e4d68df97ae21935c
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
|
|
Type: fix
Since the connection is closed, also mark the session as closed.
Change-Id: Ica3849c3ff12fa7a65ba64e563a60d6c94f5ceca
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: refactor
Change-Id: I204f3f8eebc5f5d5a377e91262f91c615fd00168
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Signed-off-by: Aleksander Djuric <aleksander.djuric@gmail.com>
Change-Id: I2fe36e2e4e8ce2906a6573301c7fca3cbab571c3
|
|
Type: fix
Signed-off-by: Aleksander Djuric <aleksander.djuric@gmail.com>
Change-Id: I186286b8959ae138528a5171c22d3e1b00f46baf
Signed-off-by: Aleksander Djuric <aleksander.djuric@gmail.com>
|
|
This adds support to compile the bnxt PMD that supports Broadcom's
10/25/40/50/100/200 Gbps NICs. Tested with modified DPDK driver on
x86_64 and aarch64 targets that is pending upstream acceptance, but
should compile just fine today.
Type: feature
Signed-off-by: Andy Gospodarek <gospo@broadcom.com>
Change-Id: I735a991c4cae4fa77e5605094facea54b781a1db
|
|
Type: refactor
Change-Id: I34306c1206b2bf5f521be6c6b78074ccf9259a08
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Change-Id: I7cba9f911abe1ae82d8381a48f65e81b615ede76
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
|
|
Type: fix
all other uses of the fib_entry_get_preifx in the code base don't pass
the prefix into recursive functions.
Change-Id: Ic1c56acd406a733b215ee2fd98b6bed58b490a4f
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Glibc 2.28 now provides fcntl64 which is used instead of fcntl
by defining fcntl as fcntl64 in fcntl.h
Type: fix
Change-Id: I87fedfbf3e0d241aafdc920e90f824d71353e0e6
Signed-off-by: Carl Smith <carl.smith@alliedtelesis.co.nz>
|
|
Apparently some dhcp servers care about it. Also fixed the unit-test.
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: If0af70d624f4122b0339f20f84be047053776fe8
|
|
Type: fix
Change-Id: I604e4dd2b29962bfcd8e950a0074637dab53c79e
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Fixes: 8389fb9
Change-Id: Ie159eb444b28b36a7af86049b80fba4e49be93cb
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Do not overflow ops_handlers vector.
Type: fix
Change-Id: I8d5e7fb8125a7bd87ecfe6f4f1390fb9f43dad8f
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Allows for comparison without needing str(MACAddress())
Traceback (most recent call last):
File "/vpp/test/test_ip6.py", line 1074, in test_icmpv6_echo
self.assertEqual(ether.dst, self.pg0.remote_mac)
AssertionError: '02:01:00:00:ff:02' != MACAddress(02:01:00:00:ff:02)
Type: feature
Change-Id: Ife1cbfc74d477695d15b33a19da7dd2fa241a348
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: fix
Change-Id: I33dc4cf7b6c69f74c7bf4971ce59442678b878ef
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: refactor
Change-Id: I25f1cc3969c6a6ec1384079dc437537acd2ec152
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
This fix was first made in
commit fdea5c6a00b74971dbb1b7ec4e25839a871006ca
but was subsequently lost in
commit 053204ab039d34a990ff0e14c32ce3b294fcce0e
Added unit test for setting VTR on a non-sub-interface to
help ensure no future regressions of this ability.
Type: fix
Change-Id: I71ce2684fb72383741455829ae2d397ea2e95eae
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
We discard unwanted events until we get an ACCEPTED.
But if we are non-blocking we need to check the queue
length every time and EAGAIN if empty before waiting.
Type: fix
Signed-off-by: Carl Smith <carl.smith@alliedtelesis.co.nz>
Change-Id: Ie0c7e5cb00f0d37d2e1534f8bb384221ff56f2e3
|
|
Type: refactor
Change-Id: I2c6b59013bfd21136a2955442c779685f951932b
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
If a client application is built against 19.08, it can dump the "manifest" of API signatures.
Either the all APIs (--dump) or the APIs it is interested in (--dumpfiltered).
When the developers of said client application wants to verify that it works with VPP 20.01.
It can connect to VPP and --validate the old mainfest file, and will be told a list of
messages (both request and reply) that has changed.
import argparse
from vpp_papi import VPP
import sys
import argparse
parser = argparse.ArgumentParser()
group = parser.add_mutually_exclusive_group()
group.add_argument("--dump", action="store_true")
group.add_argument("--dumpfiltered", action="store_true")
group.add_argument("--validate", action="store_true")
args = parser.parse_args()
vpp = VPP(use_socket=True)
vpp.connect(name='apimanifest')
if args.validate:
# Verify manifest
message_table = eval(sys.stdin.read())
missing = vpp.validate_message_table(message_table)
print ('Changed message signatures: {}'.format(missing))
elif args.dump:
# Output manifest to stdout
print('{}'.format(vpp.dump_message_table()))
elif args.dumpfiltered:
# Output manifest to stdout
filterlist = eval(sys.stdin.read())
print('{}'.format(vpp.dump_message_table_filtered(filterlist)))
vpp.disconnect()
Type: feature
Change-Id: I7e708b36f599ed88e4864970c8593cc2fe5fbf61
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Having session enable in config file wasn't
working for multiple workers
Type: fix
Change-Id: Ib29ba540a6e1d714e7e470f4c7518e3d266fe7ca
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|