aboutsummaryrefslogtreecommitdiffstats
path: root/src
AgeCommit message (Collapse)AuthorFilesLines
2018-07-27-DCLIB_DEBUG => turn on extra checks in dlmallocDave Barach2-2/+26
Also: call os_panic() on a heap botch crash, attempt to generate a post-mortem API dump, etc. Add an "ugly" test case to vec_test.c, to cause a configurable block overrun. Change-Id: I7b29a7645277f9e485e06ff83335306fedc24b71 Signed-off-by: Dave Barach <dave@barachs.net>
2018-07-26pp2: change default queue sizeBrian Brooks1-2/+2
Reduce default queue size to twice the vlib frame size. This throttles the PP from transferring more packets than are necessary for the next round of graph execution on a core. When combined with DMA'ing into L3 cache, Mpps for 64B packets increases 35%. Change-Id: I0afe426d23560f262fdc56accb6302b099bd0076 Signed-off-by: Brian Brooks <brian.brooks@arm.com>
2018-07-26Clean up dpdk plugin rx/tx pcap tracingDave Barach4-32/+32
Needed a spinlock to protect the data vector. Cleaned up debug cli so the output makes sense, and so that various parameters exist in one place. Removed a nonsense memset-to-zero which led to ultra-confusing results. Change-Id: I91cd14ce7fe84fd2eceab86e016b5ee001993be4 Signed-off-by: Dave Barach <dbarach@cisco.com>
2018-07-26Improve the sample plugin node dispatch functionDave Barach1-128/+473
Three separate implementations, which vary by nearly a factor of two in performance. Most of the performance difference is due to swapping the src/dst mac addresses with an avx2 vector shuffle instruction. Change-Id: Ieb36546d6074e4ac720d452a99d013c698135c57 Signed-off-by: Dave Barach <dave@barachs.net>
2018-07-26VPP-API client: timeout thread loop variableNeale Ranns1-2/+5
calling thread cancel on the timeout thread whilst it was sleep on condwait and then send the cond signal did not reliably wake up the thread. instead don;t cancel the thread, use a loop variable to terminate it. Change-Id: Ibc8ab6f21db7e4a98266bdf88b8b208b887820dd Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-07-26VPP-1359 Wrong vl_msg_idLukasz Majczak1-1/+1
Wrong vl_msg_id set in vl_api_stats_get_poller_delay_t_handler while reporting stats delay. Change-Id: I7d6ad14359e41c717b976390c58e254e3602e0ff Signed-off-by: Lukasz Majczak <lma@semihalf.com>
2018-07-26avf: used tx queue should be enabledDamjan Marion2-2/+8
Change-Id: I51cc4522df2dd6682148a13e7e1903850b4b3d08 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-07-26vppinfra: add SSE4.2 version of u8x16_shuffleDamjan Marion1-0/+6
Change-Id: I4bf1cfe5a9492092a7362675079c47629b6f0ee8 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-07-26avf: request queues supportJakub Grajciar3-3/+68
Change-Id: I3a4529ff8dae70da99ec95c39ddf788c9498f478 Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2018-07-26L2 Flood: use the buffer clone API rather than buffer recycleNeale Ranns1-260/+168
Change-Id: I40e4efd8061369efc535f0d49b2f63668b6d1d15 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-07-26avf: fix interrupt modeDamjan Marion2-2/+25
- assign rx thread on interface create, not on admin up - keep interrupts unmasked all the time as they are needed for writeback - forward interrupt to graph dispatcher only if queue is in the interrupt mode Change-Id: I5cc5afe24960143bef08f12d59fbd80ae0c6ccf8 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-07-25Generate vppinfra/config.h from config.in script (same as we do for ↵Neale Ranns3-11/+24
vlib/config.h) Change-Id: I55549b589e34a62d3704f788fce801392de22f46 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-07-25VPP-1332 memif: add/del socket filename bugfixJakub Grajciar1-1/+27
in case of relative path, create subdirs inside runtime dir. in case of absolute path, if folder does not exist return error. Change-Id: I01fe018102c69deb105160cfa18b741541d76c82 Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2018-07-25avf: api fixJakub Grajciar4-7/+25
avf_create_reply returns software index for the new interface Change-Id: I8a6b1a1985b072efafa24eb258b1f2cb1bea1110 Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2018-07-24Create a unit-test pluginDave Barach9-31/+608
Move the tcp unit test to the plugin Add a bihash unit test and a "make test" program to call it Adjust framework.py to load the plugin, which is disabled by default Change-Id: Ic229d386a56a9d28dbd54974f231149053ca8f93 Signed-off-by: Dave Barach <dave@barachs.net>
2018-07-23tls: avoid possible async handler duplicationPing Yu1-1/+1
One handler is good enough when engine sends out a retry status Thus this patch will just go one branch Change-Id: Id81cb3fa67d2b322b0fe1b2f62cd866cf3491eb4 Signed-off-by: Ping Yu <ping.yu@intel.com>
2018-07-23session: send rx events only if session readyFlorin Coras3-2/+15
Change-Id: I8d631121b104fb40c20701d4c1b428f2b71e5785 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-07-23L2 EFP: byteswap sw_if_index, enable flag can be u8 on .apiNeale Ranns3-4/+7
Change-Id: Ib99d02e84e468726feae4c386733da405b298e4f Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-07-23NAT44: fix forwarding feature bug (VPP-1349)Matus Fabian1-3/+3
Change-Id: I5009fcfde5c627d59dea3edda15486b9392134a2 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-07-23Buffer clone: copy opaque2Neale Ranns1-0/+2
Change-Id: I06e1dbfa0782bc03f2d0e77295b38b4fde7df35e Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-07-23Update pipeline.h: use vlib_get_buffersDave Barach3-329/+215
It's not clear that fine-graind pipelining will ever produce optimal performance. That having been written, it's an easier coding model for folks interesting in decent results without having to manually implement 2 or 4 way fine-grained parallelism. Change-Id: Ida877292832eaf759ffbb6d2e16012f8fbd427e5 Signed-off-by: Dave Barach <dave@barachs.net>
2018-07-23fix vector index range checksEyal Bari12-20/+15
Change-Id: I63c36644c9d93f2c3ec6606ca0205b407499de4e Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-07-21Loopback tx: support multiple tx intfcs per frameDave Barach1-153/+197
Can happen if code bypasses the per-interface output node, and dispatches packets directly to the tx node. Switch to vlib_get_buffers(...) ... vlib_buffer_enqueue_to_next (...), quad/single loop coding pattern. Change-Id: Ic0e5d3b9748230f4e545a54186e6e64e7a782bb1 Signed-off-by: Dave Barach <dave@barachs.net>
2018-07-21fix IP directed broadcast node declarationsMatthew Smith2-2/+2
The dev build ('make build') was failing because ip4_rewrite_bcast() and ip6_rewrite_bcast() are declared static and were not referenced. The node functions that were set for directed broadcast rewrite: ip4_rewrite_bcast_node - ip4_rewrite() ip6_rewrite_bcast_node - ip6_rewrite() Changed to: ip4_rewrite_bcast_node - ip4_rewrite_bcast() ip6_rewrite_bcast_node - ip6_rewrite_bcast() The release build ('make build-release') succeeds because there is a VLIB_NODE_FUNCTION_MULTIARCH() call referencing the function. That macro is empty for dev builds. Change-Id: I2a05f00ca43d0eae8ff2e3026991e69917003fe1 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2018-07-20bihash: give hint to CPU that we are spinlockingDamjan Marion2-4/+6
Change-Id: I78c0a6da5d8fc63c1ced43589c42abc15ab12b16 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-07-20Add congestion drop in interface handoffDamjan Marion4-24/+84
This prevents deadlock in case when worker A sends to B and worker B sends to A Change-Id: Id9436960f932c58325fe4f5ef8ec67b50031aeda Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-07-20Fine-grained add / delete lockingDave Barach9-354/+234
Add a bucket-level lock bit. Use a spinlock only when actually allocating, freeing, or splitting a bucket. Should improve multi-thread add/del performance. Change-Id: I3e40e2a8371685457f340d6584dea14e3207f2b0 Signed-off-by: Dave Barach <dave@barachs.net>
2018-07-20physmem: fix alloc when dlmaloc is usedDamjan Marion1-1/+5
Change-Id: I4b6cdf95ac694c8408eb6cf3259b335a8148b5aa Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-07-20fix issue with missing sample_main in sample pluginDamjan Marion1-0/+2
Change-Id: Ia17511e3997cdcf1d0991e62e8e2d3fb8812d133 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-07-20QOS: mark/record fix feature ordering c-n-p errorNeale Ranns1-5/+5
vnet_feature_arc_init:215: feature node 'mpls-qos-mark' not found (after 'vlan-mpls-qos-record', arc 'mpls-input') vnet_feature_arc_init:215: feature node 'ip6-qos-mark' not found (after 'vlan-ip6-qos-record', arc 'ip6-multicast') ...etc... Change-Id: I22cb98d57e2480f5978fff315b77b9cbb6a9f9dd Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-07-20IP directed broadcastNeale Ranns16-29/+280
with ip direct broadcast enable a packet to the interface's subnet broadcast address with be sent L2 broadcast on the interface. dissabled, it will be dropped. it is disabled by default, which preserves current behaviour Change-Id: If154cb92e64834e97a541b32624354348a0eafb3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-07-20avf: don't enable interrupts before interface is admin upDamjan Marion1-1/+0
Change-Id: I0fc19dd109e569f2c407a85e8fa32758e06676b8 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-07-20NAT44: in+out interface in STN setup improvement (VPP-1344)Matus Fabian1-8/+26
Change-Id: Iad7e0337a577ef8a0dfb7bde1968cc115d176043 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-07-20QoS: marking and recording for MPLS and VLANNeale Ranns3-18/+267
Change-Id: Icec79aa9039d5d7835d311fde0b7c1a0c76c9eb1 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-07-20avf: Support interrupt modeSteven2-1/+5
DBGvpp# set interface rx-mode AVF0/4/2/0 interrupt set interface rx-mode AVF0/4/2/0 interrupt DBGvpp# sh int rx sh int rx Thread 0 (vpp_main): node dpdk-input: FortyGigabitEthernet6/0/0 queue 0 (polling) node avf-input: AVF0/4/2/0 queue 0 (interrupt) DBGvpp# sh int addr sh int addr AVF0/4/2/0 (up): L3 133.1.1.10/24 FortyGigabitEthernet6/0/0 (dn): VirtualEthernet0/0/0 (up): L3 192.168.42.1/24 DBGvpp# clear run clear run DBGvpp# clear interfaces clear interfaces DBGvpp# sh int rx sh int rx Thread 0 (vpp_main): node dpdk-input: FortyGigabitEthernet6/0/0 queue 0 (polling) node avf-input: AVF0/4/2/0 queue 0 (interrupt) DBGvpp# ping 133.1.1.3 repeat 1 ping 133.1.1.3 repeat 1 64 bytes from 133.1.1.3: icmp_seq=1 ttl=64 time=.6237 ms Statistics: 1 sent, 1 received, 0% packet loss DBGvpp# sh int sh int Name Idx State MTU (L3/IP4/IP6/MPLS) Counter Count AVF0/4/2/0 5 up 9000/0/0/0 rx packets 1 rx bytes 98 tx packets 1 tx bytes 98 drops 1 ip4 1 FortyGigabitEthernet6/0/0 1 down 9000/0/0/0 VirtualEthernet0/0/0 2 up 9000/0/0/0 local0 0 down 9000/0/0/0 DBGvpp# sh run sh run Time 41.9, average vectors/node 1.00, last 128 main loops 0.00 per node 0.00 vector rates in 2.3858e-2, out 2.3858e-2, drop 2.3858e-2, punt 0.0000e0 Name State Calls Vectors Suspends Clocks Vectors/Call AVF0/4/2/0-output active 1 1 0 1.24e4 1.00 AVF0/4/2/0-tx active 1 1 0 4.28e4 1.00 api-rx-from-ring any wait 0 0 2 6.94e4 0.00 avf-input interrupt wa 1 1 0 1.09e4 1.00 avf-process any wait 0 0 47 1.01e4 0.00 ... DBGvpp# DBGvpp# set interface rx-mode AVF0/4/2/0 polling set interface rx-mode AVF0/4/2/0 polling DBGvpp# sh int rx sh int rx Thread 0 (vpp_main): node dpdk-input: FortyGigabitEthernet6/0/0 queue 0 (polling) node avf-input: AVF0/4/2/0 queue 0 (polling) DBGvpp# ping 133.1.1.3 repeat 1 ping 133.1.1.3 repeat 1 64 bytes from 133.1.1.3: icmp_seq=1 ttl=64 time=.2038 ms Statistics: 1 sent, 1 received, 0% packet loss DBGvpp# Change-Id: Ib7d2b505ae4bb74a052263af766ca37d9df7bfe4 Signed-off-by: Steven <sluong@cisco.com>
2018-07-19Fix coverity warning / legitimate minor bugDave Barach1-1/+1
Of the form "if ((foo & 0x10) == 1)", as opposed to "if (foo & 0x10)" Change-Id: I6a6d276aeed4af7c1c6c78546ee68d598d54d7db Signed-off-by: Dave Barach <dave@barachs.net>
2018-07-19dpdk: fix Mellanox Connect-X3 VF IDMatthew Smith1-1/+1
Fix a typo from previous patch. Change 0x104 to 0x1004. Change-Id: I82230a8a0ec01567eb1d4bc12ac02062c2a98347 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2018-07-19Remove unused argument to vlib_feature_nextDamjan Marion27-109/+63
Change-Id: Ieb8b53977fc8484c19780941e232ee072b667de3 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-07-19session: coverity warningsFlorin Coras2-20/+17
Change-Id: I4505954c737e8c6a3d4177c6833f2b12099e6dd4 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-07-19Add a new communication channel between VPP and openssl enginePing Yu4-20/+60
Thus when engine buffer is full during a burst in performance tesing, this code will help VPP handle retry machansim. Change-Id: I0f9fc05d3dba8a54d34dca4c6137700d6c80f714 Signed-off-by: Ping Yu <ping.yu@intel.com>
2018-07-19Cleanup of handoff codeDamjan Marion6-341/+110
- removed handoff-dispatch node - removed some unused buffer metadata fields - enqueue to thread logic moved to inline function Change-Id: I7361e1d88f8cce74cd4fcec90d172eade1855cbd Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-07-19qos record:fix disable on interface deleteEyal Bari1-1/+1
handle the case where qos record was enabled more than once Change-Id: Ic901b2f5b400751e82d57655983d10457ec62243 Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-07-19ip4-input and ip4-input-no-checksum should be siblingsNeale Ranns1-11/+1
each edge/arc from these nodes must be the same. Change-Id: Id5dace61bca0af71ad1df98583425226e81fd0de Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-07-19Fix IPv6 csum calculation in GTP-U encapsulationAndreas Schultz1-24/+25
The length field is included in the checksum. Therefor, we need to update it before calculating the checksum. Change-Id: Id23234efb80ea3747a0f8a5c7bf8621748d27635 Signed-off-by: Andreas Schultz <andreas.schultz@travelping.com>
2018-07-19dpdk: set log write fd to non-blockingMatthew Smith1-7/+15
If a PMD writes too many log messages using rte_vlog(), the pipe for logging can fill and then rte_vlog() will block on fflush() while it waits for something to read from the other side of the pipe. That will never happen since the process node that would read the other side of the pipe runs in the same thread. Set the write fd to non-blocking before the call to rte_openlog_stream(). If the pipe is full, calls to write() or fflush() will fail but execution will continue. Change-Id: I0e5d710629633acda5617ff29897d6582c255d57 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2018-07-19dpdk: add device IDs for Mellanox ConnectX-3Matthew Smith1-1/+6
Recognize the PF and VF device IDs for the Mellanox adapter used on Azure. Change-Id: Ic7b36b37ac93db2b696354ffe6fa2b6d62ee3801 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2018-07-19PAPI: Remove logging calls from pack/unpackOle Troan1-18/+0
This slowed down the decoder. Improved from 16s to 13s for 1000 dump/details messages. Change-Id: Iae78136b020cdd9344f3b2170ce426d0f074b6e6 Signed-off-by: Ole Troan <ot@cisco.com>
2018-07-19gbp: Add support for ACLMohsin Kazmi6-58/+178
Change-Id: I7513c41307e62068ab5d9739cac393675c6066f8 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2018-07-18qos mark/record: fix disable-sw_if_index range checkEyal Bari2-2/+2
Change-Id: I2abb3ceebae3a32cee9aa2a999bd47c37719d3ac Signed-off-by: Eyal Bari <ebari@cisco.com> Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
2018-07-18DPDK: coverity scan warningsMarco Varlese2-7/+4
This patch addresses the coverity scan warnings reported for the DPDK plugin. Change-Id: Ie7ac7ffcf4a6c63245eae0f9910a193ab1e318a8 Signed-off-by: Marco Varlese <marco.varlese@suse.de>