Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: refactor
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I30cc31c438d357d48576fba84e54809455960eaa
|
|
Type: improvement
Signed-off-by: sarmurug <sarmurug@cisco.com>
Change-Id: Ibbfe827b9c4c603a6fe7cc49970a46bd683194ce
|
|
Align runtime_data to 8 bytes to avoid alignment issues with any
pointers in runtime_data located structures.
Type: fix
Signed-off-by: Dmitry Valter <d-valter@yandex-team.ru>
Change-Id: I9cb1b73595e654a4b15c45f87b43fa6cfbcb6e51
|
|
Type: fix
Change-Id: I857403b9d93ee4c17f2dd5ac8e6dafd66260a252
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Creating tap interface / sub interface causes allocation of a new
software interface with possible sw interface pool reallocation.
In such case accessing L3 MTU and interface flags by obsolete sw
pointer is UAF.
Instead, keep desired tap interface MTU value before sw intreface
creation and refetch sw pointer right before sw flags inheritance.
Type: fix
Fixes: b89c1ddcb3b4f9138ca3ebefb2115f896ff3e1bd
Signed-off-by: Vladislav Grishenko <themiron@yandex-team.ru>
Change-Id: I21ea46d146d11060bb9bedc77377ab17ae9e22e8
|
|
Type: fix
Fixes: 1cd0e5dd533f
In vnet_eth_register_interface(), max frame size was being used where
frame overhead was intended.
Change-Id: I6e6de25e2d616caaf35730ab3d15235ec679ebdd
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: fix
Fixes: 91f17dc
Change-Id: I860b6d5d5e9cf47d84fde0a2c92be43125038694
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Currently, the plugin can monitor link state changes on hardware
interfaces for which a linux-cp pair exists. When the link goes down on
one of the hardware interfaces, the plugin processes IPv4 routes that
resolve through that interface according to the configurations:
del-static-on-link-down and del-dynamic-on-link-down.
The problem is that link state changes are not signaled for
subinterfaces and the code that handles IPv4 routes is not triggered.
When the link on a hardware interface goes down, it implies
that subinterfaces added to that interface also will have the link in
the down state.
With this change, when the link goes down on a hardware interface,
iterate over subinterfaces added to the interface and apply the same
logic of routes processing as for hardware interfaces.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I97337d2e328437c73f2d99a00737768778f197a1
|
|
Type: improvement
lcp_router_table_flush() is used to remove routes from the given route
table if they are resolved through the given interface with specified
FIB source. Currently, if you need to remove routes from a route table
that are resolved through one of the interfaces from a vector, the
function has to be executed for every interface from the vector. Every
execution walks the route table again.
With this change, lcp_router_table_flush() accepts a vector of
interfaces. Thus, the function can walk a single route table once and
delete routes that resolve through one of the interfaces from the
vector.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I6d99384064d279dea24bb4dc1790a1af943be41c
|
|
Fix ordering in CMakeLists.txt
Type: refactor
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Change-Id: I8e71e4fbc048a80c4b250c2a66cfd8a522bde5f4
|
|
format() expects a NULL-terminated C-string as format string.
Type: fix
Change-Id: Ib428cf2debbf98850eed512907175f8ae8ba3c04
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
* Correct endianness issue
* lip_namespace is a vector not a string
* Provide null termination to avoid unpack() failures in the client
Responses in the python API now look like:
lcp_itf_pair_details(_0=328, context=3, phy_sw_if_index=1,
host_sw_if_index=3, vif_index=19, host_if_name='ice0',
host_if_type=<vl_api_lcp_itf_host_type_t.LCP_API_ITF_HOST_TAP: 0>,
namespace='dataplane')
lcp_itf_pair_details(_0=328, context=3, phy_sw_if_index=2,
host_sw_if_index=4, vif_index=20, host_if_name='ice1',
host_if_type=<vl_api_lcp_itf_host_type_t.LCP_API_ITF_HOST_TAP: 0>,
namespace='dataplane')
lcp_itf_pair_details(_0=328, context=3, phy_sw_if_index=5,
host_sw_if_index=6, vif_index=21, host_if_name='ice0.1234',
host_if_type=<vl_api_lcp_itf_host_type_t.LCP_API_ITF_HOST_TAP: 0>,
namespace='dataplane')
Type: fix
Signed-off-by: Pim van Pelt <pim@ipng.nl>
Change-Id: If4bf06a8b70977676ec7f5b1413cee6cc9d1714a
|
|
Type: improvement
Change-Id: I5317afa02fa1525a7d8df595b56eb6546ccded57
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Change-Id: I4c7f2f63651df4362ce1e0e36d885fedf55595c6
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ic81aafd5f378de06e5ea8cdd6a59e07ff1a7afca
Type: improvement
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
ply_create() is not thread safe when the ip4_ply_pool expands.
Type: fix
Signed-off-by: Vladislav Grishenko <themiron@yandex-team.ru>
Change-Id: Ie11cc8b1ba587d5e9239a60f4e288492da61368e
|
|
Format host interface name as vector rather than c-string.
Otherwise non-null-terminated vector overrun triggers ASAN.
Type: fix
Fixes: 1705a6baefe205bb6792b547c7376eee3f328a71
Signed-off-by: Dmitry Valter <d-valter@yandex-team.ru>
Change-Id: Ib204e57ee17c7ed3bfeb568dcdd834d7d7519102
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I1c55c054fea6c6886d8287a9b6e264a308f89504
|
|
Do connects in an session layer rpc instead of doing cli process sleeps.
Performance with 4 workers goes from ~120k/180k first run/warmed up to
~135k/240k
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Id184913e9898f8db099e29a605f3a9b1fc67be63
|
|
Type: improvement
Change-Id: I946d91e67c332ecac0b09d50980529b9d4e74f9c
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Convenient for type conversion
Type: improvement
Change-Id: I35a770e06e6318fb4249b70021ed6f6c93b07162
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Change-Id: I99d2c69ede39b3ba5604e1811ce12209c47f5caf
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Currently, when the link goes down on an interface, routes that resolve
through that interface and created with Nexthop API are removed by the
kernel. However, IPv4 routes remain in the FIB because the kernel
doesn't send any notifications about that.
And for the plugin working with user-space applications that create
routes in the kernel using Nexthop API there should be a mechanism to
synchronize the FIB and the kernel in this case.
With this change, add two new startup configuration options to the
plugin to be able to control what should happen with static and dynamic
routes managed by the plugin on link down:
- del-static-on-link-down (disabled by default, delete routes created
with the linux-cp static FIB source on link down),
- del-dynamic-on-link-down (disabled by default, delete routes created
with the linux-cp dynamic FIB source on link down).
Then, monitor link state changes on interfaces for which a linux-cp pair
exists. If the link goes down on one of the interfaces, process routes
that resolve through that interface according to the new configurations.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I0fbaeeca3f3d1fcd22e8eebb08a0a4a3d0dfe5b8
|
|
Type: make
Change-Id: I1bad5f84797a1bfeb41420f408540604d461f440
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Fixes case when packet to link-local address is received over
gre/mpls or other non-ethernet interface and ip6-ll fib for it
is undefined.
If by a chance ip6-ll fib index is valid, packet will be passed
to some ip6 fib with possibilities to be sent out over unrelated
interface or be looped again into ip6-link-local dpo till oom
and crash.
Type: fix
Signed-off-by: Vladislav Grishenko <themiron@yandex-team.ru>
Change-Id: Ie985f0373ea45e2926db7fb0a1ff951eca0e38f6
|
|
Type: fix
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: Ibd23648483b38696271154237e81081480bb16e0
|
|
Type: refactor
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I5bbf8d584efdec57908c61f8626bcc81590401b3
|
|
When incrementing node counters with vlib_node_increment_counter
the local error index should be passed in. vlib_node_increment_counter
adds the local index to the nodes base index to get the counter to
write to. If we pass in the global counter index, the offset gets
added again in the fn, and we then potentially write into memory that
is not part of the counter vector.
Type: fix
Signed-off-by: Paul Atkins <patkins@graphiant.com>
Change-Id: I43be33a51bcb52d520495d326b971c1d848d96b5
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I6c86d0691bd0594d8b2c05d83d004be1aa8c5e21
|
|
Type: fix
otherwise if two packets arrive with the same source address but from different VRFs, then they are treated as the same and they use the same LB and thus share the same fate. but the lookup, when done, results in two different LBs, and hence the fate can be different.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Id6e16f7c577a561d9ddd7066339fa4385361d07f
|
|
Type: improvement
Currently, RA message sending is enabled by default - both periodic and
in response to RS message. However, RFC 4861 section 6.2.1 says the
following:
Note that AdvSendAdvertisements MUST be FALSE by default so that a
node will not accidentally start acting as a router unless it is
explicitly configured by system management to send Router
Advertisements.
With this change, RA message sending is disabled by default and
"test_ip6.TestIPv6.test_rs" updated appropriately.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I2a8865199cb665c59268504aefe2976e5ee96dc2
|
|
Type: fix
The reported MTU should include the MPLS label overhead
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I3df6d2e0b13f49701e187a766a157498dcaafbc0
|
|
Type: fix
Change-Id: Id7ae0d4c53cbca3785964f0bef92e9cd589d4ce9
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
OS_ID_LIKE from /etc/os-release is used to determine
the type of packaging. On Debian it ends up being empty,
so the "ninja package" does not work for out of tree plugin
builds.
Solution: if OS_ID_LIKE is not set, set it to OS_ID
Type: fix
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Change-Id: I077d4fdb509ea94b187d11391b1f49edb94c4e30
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
The way of specifying which interface supports what has changed.
Re-add support for adaptive mode in virtio.
Type: fix
Signed-off-by: Paul Atkins <patkins@graphiant.com>
Change-Id: I2f8ffa6311a4081b93fb08a7e92408b8bffbae64
|
|
Type: fix
When a covering entry is removed from the table, the covered entries first see it 'updated' and then 'removed'.
the crash occurs because the covered prefixes share (simple pointer copy) the covereds hash table of path extensions. During the cervers deletion this hash table has been removed and the update of the covered crashes when recaluationg forwarding becuase it uses the free'd hash.
Fix is to refetch the shared hash table (which is NULL) when the covered is updated.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Icefca9d7b21da975111d0e974d75f663fc0cc00c
|
|
The support for interrupt mode is not being respected as it is not
copied into the driver conf, which is what is checked when trying to
enable it.
Type: fix
Signed-off-by: Paul Atkins <patkins@graphiant.com>
Change-Id: I2e502306e27bd98f8037d1a0a396201e099b50b5
|
|
Type: fix
Fixes: 26bc9f3c855496fb56f5fc648f75a299d4d539f8
Change-Id: Idab52bf856c03ded7b181608c3db1313aa2e33de
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Currently the last character of the error message string
is temporarily changed to a null byte '\0' before the string
is sent to syslog(3), resulting in confusingly incomplete log
entries.
This patch changes the syslog format to "%.*s" so that the
maximum number of characters to be printed could be controlled.
Type: improvement
Signed-off-by: Jing Peng <pj.hades@gmail.com>
Change-Id: I1bd6295c19b51b962a3d8ee3016cd91ffb2a4eaf
|
|
Type: improvement
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: Ib96ee54eaf967bf435d6da910a6b582e87fbedc0
|
|
Type: improvement
This patch adds support for:
1) GSO
2) checksum offload
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: Ib00629888c62da04d58db36ce021993769e736c9
|
|
Type: feature
CPU usage ~20% less than v2.
Performance improvement 20% more than v2.
High vector rate.
Change-Id: I24bc594200f42664b59d07b44d44578e61068bbc
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Use of clib_mem_is_heap_object is not reliable enough for production use
as it relies on just few bytes of memory allocator chunk header.
Type: improvement
Change-Id: I48c8adde8b6348b15477e3a015ba515eb7ee7ec2
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
This allows specifying both c string and vector for node name
and removes need for crafting temporary string.
Type: improvement
Change-Id: I0b016cd70aeda0f68eb6f9171c5152f303be7369
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Fixes: 65105c95fe03 ("dpdk: improve logging")
Signed-off-by: Tianyu Li <tianyu.li@arm.com>
Change-Id: I69d616c7e6e7b5395ebf083b1ac5c3e85f99bbdd
|
|
bihash keys are less than 64-bytes, do not overflow.
Type: fix
Change-Id: Ic55407eb9ccca38058f7e62b363ec05c8445fbcb
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Change-Id: I76e28854db8a1e9134c816c0c5d81b031dc4e27d
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
This also makes the is_white_space function
public
Change-Id: Ifc1c0d4509f3ecae14f09bb5fa7a2eea33c49b09
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: refactor
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Ibb6d19de053c306e9758dbfa827ab7bcab5de856
|
|
Possible races while concurrent additon to the new sessions vector
in a one process and remove from it in an another need to be avoided.
Let the vector be changed in the new session process function only.
Also cli_file_pool element may be freed already at the new session
event arrive timepoint, still causing unexpected cli banner for
noninteracive cli sessions.
Type: fix
Fixes: 17a67218587d40541ff522c6a86f354720481fbb
Signed-off-by: Vladislav Grishenko <themiron@yandex-team.ru>
Change-Id: I022d16dd3aad9c9330834d35c58938f04b015b08
|