Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: refactor
Change-Id: Ifd770ff4850e63474bf4682ad463021b03786b4b
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
When a VR is added, multicast accept routes are added which allow
inbound packets sent to the VRRP group address on the interface of the
VR so advertisements from peers can be received. If this is the first
VR added, also add a local forward route for the VRRP group address so
the packets will be processed by the VRRP input nodes.
When deciding whether to add/delete the local forward route, the total
number of VRs configured was being checked. If there are no VRs
configured initially and a VR is added for IPv4, this check would
correctly see that this was the first VR and add an IPv4 route. If an
IPv6 VR was configured subsequently, this check would find that a VR
was already configured and incorrectly decide that no route needed to
be added and IPv6 VRRP advertisements from peers would be dropped
as a result. The opposite would occur if you first added an IPv6 VR
followed by adding an IPv4 VR - whichever address family was added
first would work correctly and the other one would not work.
Since a route is needed for each address family, check on the per
address family count of VRs when deciding whether to add/delete the
local forward route instead of checking on the global count of VRs.
Change-Id: I851a7ef8a4f9e4e370d08b0832284a13387eb083
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Main heap can be hugepage backed so it is more efficient to use
main heap instead of allocating special heap just for mtrie....
Type: improvement
Change-Id: I210912ab8567c043205ddfc10fdcfde9a0fa7757
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Custom ACL-plugin heap was useful in early stages,
but it interferes with other infra optimizations.
Remove it and use global heap.
Change-Id: I2300548f1d1798dec27bc5a2a41cf37f9fcda95d
Type: improvement
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Type: improvement
Change-Id: Iab623a2e11bd5787f4cae549143f49888e0dd9c4
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I7cdbcfeb6f77a720e190daf9fe555320e586bba8
|
|
Type: fix
While preparing to send a ip_mroute_details API message, the number
of paths for a multicast route is stored in an int in
send_ip_mroute_details(). Before the value in the int is copied into
the field n_paths in the API message, the byte order is swapped.
This results in n_paths getting set to 0.
Change the int to a u8 and omit the byte swap so API clients can
receive data on multicast route paths.
Change-Id: Ie6dcb0f7b135c5b5deeeb2e44147560dbbb12507
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Split vat/api_format.c also for VNET features.
Use auto-generated VAT test code and support dynamic message ID allocation as for plugins.
The arp and geneve features as Guinea pigs.
Type: improvement
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I461591496766bdf10c5f950fd30f1a0ae05909da
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Currently there is no way to decrease simple counter. To extend
counters API new method allows to decrement counter by given value.
This might be useful in implementation of statistics stored in stats
segment.
Type: improvement
Change-Id: I7c08c62bffa6a2d50e9e2cf884f7b2d48538f34b
Signed-off-by: Sergey Matov <sergey.matov@travelping.com>
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
sanitizer complains about strlen on hi->name in tap_dump_ifs.
hi->name is a vector which is not null-terminated, so use vec_len.
Type: fix
Signed-off-by: Vladimir Isaev <visaev@netgate.com>
Change-Id: Icdd5f65369bb51b0c4a9cd86c24899e6febd837c
|
|
Type: fix
The function of application_setup_proxy() be called when application run as a
proxy server, "app_wrk->first_segment_manager" be realloced in this function,
but variable of "sm" point original memory location.
Signed-off-by: fanyf <fanyufei521@outlook.com>
Change-Id: I753c9fb60d1c0794d5eede9f3fab48381a802e3c
|
|
Initialize txq lock only if some txq are shared and check if another
worker is already operating on the txq before processing gro timeouts
in input node.
Type: fix
Change-Id: I89dab6c0e6eb6a7aa621fa1548b0a2c76e6c7581
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: improvement
Change-Id: I190c6896152c626aa7cb1055cfce5d9cfcd5b68b
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Change-Id: I9973bce20a0a2a8a7e227cf96518de5b79374425
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Change-Id: Ica75c4e43d6198658a1954640c7ac56ea68bb39a
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: improvement
Change-Id: I04752c011e4ca58f56aa53f6ae27bae93a5c4590
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Change-Id: I6fdc4e952097e92ac3aa53e0be3ef99e0d801b28
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Heap may use different page sizes so we will not be able to create
stack protection page.
Type: improvement
Change-Id: Ibb35c9f0a151c464ee0167d17f2bd773ef6f530b
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Change-Id: I381fc3dec8580208d0e24637d791af69011aa83b
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Change-Id: I298aadfdf17d98dfb1ada1ec4f87e0821e6aeb7f
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Change-Id: If2e907967c9b75997b581ff0c058bd5c15e823f5
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I798db694bdc63ae3a6e28d1908245b5ea0bfa84f
|
|
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: Ica4601c9d17e182cbc348989a9f75ab1cb18b78a
|
|
To hold more data later...
Type: improvement
Change-Id: I4006d22dcacd788988c4907f2c263fd4e4a9d398
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
NUMA node parsing with vlib_get_thread_core_numa() can failed on single
socket systems. Use clib_get_current_numa_node() instead as we already
pinned the main thread to the requested core.
Type: fix
Change-Id: I22339516d0305689a58584c92ded7c96eb53be39
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
outbound:
wrong header len computation
gso size and header length need to be set in the first segment of the
chain
inbound:
EOP may have zero length descriptor to terminate the chain
missing endian conversion for ethertype
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: Iaa003c0e9af3ead4df6c6c0d5772a179d2ff15c4
|
|
Type: refactor
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ibebb6f7d4e610570693e213acd2f6d9332c563c6
|
|
Type: improvement
Signed-off-by: Yulong Pei <yulong.pei@intel.com>
Change-Id: I43556f8c76c7aae64d9c927e1fda3c1774d7e49d
|
|
Type: style
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: Id86e16677564669b0295bbb9fc1303fe39a21b6f
|
|
The syntax of the deprecated flag has evolved.
Clean up usage to be "option deprecated;".
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: If2b639f275eb8db58b36c457f9245fe35a4d8cb1
|
|
Type: feature
Ticket: VPP-1861
Signed-off-by: jan_cavojsky <Jan.Cavojsky@pantheon.tech>
Change-Id: Iaeff13b19a712257223a4e77893cfd9398c18327
|
|
Type: improvement
Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com>
Change-Id: I14de90f07d825c5c99023996a88173ee855e9a6f
|
|
The local|remote options to vat's lisp|one_eid_table_dump api command
does not print the eid details instead it produces the following error
messages:
Filter error, unknown filter: 1
Filter error, unknown filter: 2
Type: fix
Signed-off-by: Onong Tayeng <otayeng@cisco.com>
Change-Id: I000c290b400dbf39bd883d57115923167092c9bd
|
|
Type: fix
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I7f98d0c7847ecc40b90b78e5ae83f320575be310
|
|
Type: fix
Change-Id: Id61aa407eeeb4d44cf47ed39283a0c79ed3abbee
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Currently l2 fib allocates 512MB hash table unconditionally on startup.
This patch postpones table creation up to the point where first
interface is put into l2 mode or mac entry is added.
In addition it reduces default table size to 128MB and increases number
of buckets 4 times. This default setting should be enough to keep 1M mac
entries.
Also, new startup.conf section is added which allows user to change memory
and bucket size. .i.e:
l2fib {
table-size 512M
num-buckets 524288
}
Type: improvement
Change-Id: I2a29209aa3545181f0087544c97a54d8157b6ec5
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ic904abedcd270c95e782159170d457bc396424a0
|
|
Type: fix
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Ib1eabbc87a573c660ac251602d631f167928259b
|
|
To enable add "app-socket-api /path/to/socket" to vcl.conf. On vpp side, add
use-app-socket-api to session stanza in startup.conf
VPP allocates a socket per application namespace which it places in the
app_ns_sockets subfolder of the run folder (default /var/run/vpp). The
socket used implicitly selects the app namespace for the vcl app.
Type: feature
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ifc14b93dcbf6ef9bed1852d46cd069f4855b92ef
|
|
Type: refactor
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I0391db5c3ad038265cb8ebf9de02925653e35959
|
|
This is an af_unix socket alternative to the binary api. To enable it,
add use-app-socket-api under session stanza in startup.conf. When the
socket api is enabled, attachments through the binary api are disabled.
The socket api only works with memfd fifo segments, i.e., shm segments
are not supported.
Type: feature
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I55ffcee201d004846daeeec85c700c7e7a578d43
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ibbe438aa6f2fe6d9f55c56ca6d3aec1a29b32cad
|
|
Type: fix
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Icc1c458474d357c7d9b3b4df1897500de0c314a1
|
|
The dslite plugin would on plugin load initialize large bihash datastructures.
Postpone until configured.
Type: improvement
Change-Id: Ie790ab8c5fc39fac18153acd54dcd051805e763a
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Type: improvement
Change-Id: Ie44dbf9396cfed19dba153810b7bd76ce5377cd4
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Change-Id: If44c807d188b3e88d819f4132d73e6a34402a525
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: fix
add UT for sneding handshale init and transport packets
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Iab1ed8864c666d5a0ae0b2364a9ca4de3c8770dc
|
|
In the vat help msg for one_add_del_l2_arp_entry the IP address option
is misspelled as "ip4 <ip4>" when it should have been "ip <ip4>".
Type: fix
Signed-off-by: Onong Tayeng <otayeng@cisco.com>
Change-Id: Id4058a3ddfdb78b840d7e5a3c330e67b393f5d3b
|
|
Type: fix
Change-Id: I4c19636c2be8a577c6cba272708cb04bcc24785b
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
The lisp|one show eid-table command's help msg does not display the
available options. This patch fixes that.
show lisp eid-table [local|remote|eid <eid>]
show one eid-table [local|remote|eid <eid>]
Type: fix
Signed-off-by: Onong Tayeng <otayeng@cisco.com>
Change-Id: Id39148db2ff291a7fe859830c1488b69ccd15c05
|