Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: fix
Fixes: 40f4810
Change-Id: Idf51462c8154663de23154f17a894b7245c9fbf0
Signed-off-by: Damjan Marion <damarion@cisco.com>
(cherry picked from commit 08600ccfa12f529d6ca7b852106227fc5f7addbf)
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ic7a8fd37d79fc9c09c8b1539d630f3b8983b8bb3
(cherry picked from commit c1b038001e1f18effb3c9ff5daa9e9cac1cd66e8)
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Icd62dc110e3a73b24372f3a5162f8008b7edee9f
(cherry picked from commit a127d3c157cb6e7658451a877abbfe0dd16c982a)
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I401a116a1a46c0dc5d591115de5ff0eef2f6440b
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: If96dc748a716a261edfcb1020210bd73058e382f
|
|
If the control agent enabled a binding on an interface multiple times,
we would add the node in the feature arc multiple times.
Type: fix
Change-Id: I2ca247db0a0211f5fa3974a18ca4fcae8485cb12
Signed-off-by: Ole Troan <otroan@employees.org>
|
|
For blocking sessions, if fifo event still active before size check it
could lead to vpp not generating an event because of race to check flag
in vpp and to eventually unset flag in vcl.
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I0e350b9ff92a4e08a9249345ae224589c09d305b
|
|
- CID-322713, CID-322712, CID-314881, CID-314880,
CID-314878 COPY_INSTEAD_OF_MOVE
Type: fix
Change-Id: Idad6806fcd4e1a89a750dcc0584b5b1f0432bf3c
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Setting session limit should return error for unknown fib.
Optimize max_translations_per_fib expanding and drop unnecessary
trailing fib entry.
Type: fix
Change-Id: Ie7d2b363ade48f53598faa617a49cce7b2db6400
Signed-off-by: Vladislav Grishenko <themiron@yandex-team.ru>
|
|
Session state cannot be updated after async notification event is
generated for app. Instead, make sure quic sessions that accept new
streams are switched to listening state only on accept.
Type: fix
Fixes: 0242d30
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I9663ccadbea99d555ad49e871f7dff897239dc84
|
|
As per discussion on the VPP community call,
since the message is used in CSIT tests and did
not see the changes in a while, mark as production
for the purposes of change process.
Type: improvement
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Change-Id: I4a79aafb1a9f37ac87faea7abea28cf01d1ffb4c
|
|
As discussed on the VPP call, since CSIT tests use these messages
and they have not been changedfor quite a while, bump the version
so these messages are considered as "production" from the change
process standpoint.
Type: improvement
Change-Id: I93a04b10b273d5904c0678fa0b85d47f9f683a9b
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
As per discussion on the VPP call - since the APIs are used
in CSIT tests, mark them as production from the change process
perspective.
Type: improvement
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Change-Id: I9164073425384e8aa281445a2852fee49b777e2f
|
|
As per discussion on VPP call - since the APIs are used in CSIT tests,
and there has not been changes in a while, mark them as stable from
the API change process PoV.
Type: improvement
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Change-Id: Ia644e1dfcd9d182cc6f10089fc44397a61e8aaf6
|
|
As per discussion on the VPP call: since the CSIT tests use these
APIs and the APIs have not changed in quite a while, stabilize the API
from the change process point of view.
Type: improvement
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Change-Id: Id81999d03cce37764f6ed7d4f77ef5a71fe41ad1
|
|
Type: fix
Change-Id: Ieb50ab548bb34bdbb44d973037ee452d48f412ea
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Type: fix
Change-Id: Icdebc8629946e0e7c8dde3e45ee93ff9027e7c68
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Type: improvement
Change-Id: Ief77ae7338667ede290aece6933bb5ae2e76ffc6
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I882bef6f45fd276587fb93944ff4e21dc57dbca2
Type: fix
Fixes: 1c82cd4
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Change-Id: I2daa8fc338289555649135e7f0898e139807fdce
Signed-off-by: Damjan Marion <damjan.marion@gmail.com>
|
|
Type: fix
Change-Id: Iacb04846c634231854f26348cc17cc729d6e0d87
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Change-Id: Idc036d5967495cc2522b2a30e3acd3ec4c0cd3ff
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Type: style
Fixes: 054229ebbdeb3f87d96c1abf93b511c86cd6ff0f
Change-Id: I7c3080db94566af249e5082d59a4e6373c616888
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
perf_user_access_enabled is defined as u8,
clib_sysfs_read format type is %u, this is for unsigned int,
change type from u8 to u32.
Type: fix
Fixes: 268d7be66b8b ("perfmon: enable perfmon plugin for Arm")
Signed-off-by: Tianyu Li <tianyu.li@arm.com>
Change-Id: I48ec00605e496d185370e77d894d7852d6d22124
|
|
Type: fix
Signed-off-by: Artem Glazychev <artem.glazychev@xored.com>
Change-Id: Ib8eb70336956bc2e8d0454f3c1f2c62ec98cb009
|
|
Type: fix
Change-Id: Iaf16bb720d76ea3ae04afb8123b7cac15771ef2b
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Type: improvement
Signed-off-by: Xiaoming Jiang <jiangxiaoming@outlook.com>
Change-Id: Ib8bb300f5b62648f6b634046415742bdf5365982
|
|
This change aims to affect crypto_sw_scheduler behavior,
but all the edits end up in vnet/crypto.
Previous release CSIT tests were testing async crypto in polling mode.
After 9a9604b09f15691d7c4ddf29afd99a31e7e31eed introduced adaptive mode
for crypto dispatch, the CSIT performance got way worse.
Possibly, there is another VPP bug related to adaptive mode
(it should not lose as many packets as seen in CSIT),
but the next release is too close for trying to fix that.
This change (instead of fixing adaptive mode)
allows CSIT to continue testing polling mode (after explicit API call),
while keeping the adaptive mode as default behavior.
The deprecated crypto_set_async_dispatch always disable adaptive mode,
crypto_set_async_dispatch_v2 has parameter to enable or disable it.
The mode parameter is still used for the inital state of adaptive mode.
Type: feature
Change-Id: Ib98080eefb4be291207af543884f2c3837f92f59
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
The checkstyle --fix command remains confused
around the def/foreach/undef usage in convert_async_crypto_id,
but at least the other functions now look correctly indented to me.
Type: style
Change-Id: Ic8f7b580267386b7a6b07d33d9ba7ae9787c0e0a
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I99631b1be6e19f0cefd1cefa82a51e6f8e9be2ac
|
|
Type: fix
Signed-off-by: Frédéric Perrin <fred@fperrin.net>
Change-Id: I45191b7316c88038bcd57d62aeb07bb109cf4a4d
|
|
The logic for calcuating processed elements in the cache ring was broken.
In case tail and deq_tail equals and frame element pointed by the tile
is not NULL it means there is exactly one processed element in the ring.
Type: fix
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
Change-Id: I69c978334fc952049393214ccc9cc5245351f7f7
|
|
Type: improvement
Change-Id: I98eeba1ad2f9ed0531a7c615e0e70e535f24f813
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Use client address hash to pick the first outside address
instead of just address high octet, becasue it may denegerate
into stable 10/172/192, depending on nat address count.
Fix outside address distribution test to acually test the
distribution, not the algo, so previous distribution will
fail with 65 nat addresses and 100 clients:
FAIL: Outside address distribution based on source address
Traceback (most recent call last):
File ".../test/test_nat44_ed.py", line 2048, in test_outside_address_distribution
msg="Bad outside address distribution")
AssertionError: 156.25 not less than 0.33 : Bad outside address distribution
Type: improvement
Change-Id: I604b1294422f20d211db5614c47559557a78a193
Signed-off-by: Vladislav Grishenko <themiron@yandex-team.ru>
|
|
Type: improvement
DBGvpp# set loggin class virtio level debug
DBGvpp# create int virtio 0000:00:03.0 tx-queue-size 1024
show virtio pci
```
Virtqueue (TX) 1
qsz 1024, last_used_idx 0, desc_next 0, desc_in_use 0
avail.flags 0x1 avail.idx 0 used.flags 0x0 used.idx 0
```
show logging
```
2022/07/22 23:20:22:557 debug virtio 0000:00:03.0: tx-queue: number 1, default-size 256
2022/07/22 23:20:22:557 debug virtio 0000:00:03.0: tx-queue: number 1, new size 1024
```
Change-Id: Ib1a3ebe742b3a6c9fe72bd1c5accfe07682cbdd1
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Punt support for ICMP6 messages allows for an external IPv6 RA advertisement agent.
Type: feature
Change-Id: I0cc928b747ac1f8335ee9f7c42a3231424825dbc
Signed-off-by: Ole Troan <otroan@employees.org>
|
|
Several api messages were not mp-safe although marked as such
because non-zero base id was not taken into account, and therefore
some other (from zero base id) were falsely mp-safe instead.
Keep messages as mp-safe, as they falsely were before:
10 get_first_msg_id 0 1
12 api_versions 0 1
Messages that are no longer mp-safe as they weren't marked:
15 sockclnt_create 0 1
33 proxy_arp_intfc_dump 0 1
Fix messages to be really mp-safe:
809 bridge_domain_dump 0 1
920 ip_route_add_del 0 1
921 ip_route_add_del_v2 0 1
1362 get_node_graph 0 1
1671 create_vhost_user_if 0 1
1675 create_vhost_user_if_v2 0 1
Additionally mark messages as mp-safe, seems they need no barrier:
1360 show_threads 0 1
1370 show_version 0 1
1372 show_vpe_system_time 0 1
Type: fix
Change-Id: Ie6c1e3aa89f26bf51bfbcb7e7c4d9fee885487b7
Signed-off-by: Vladislav Grishenko <themiron@yandex-team.ru>
|
|
Type: fix
Byte swapping should be done before verifying message otherwise the message length will be wrongly computed.
Change-Id: I90b2f60bd33e5362e0edd5ee425f6a6f07886f1e
Signed-off-by: Sylvain Cadilhac <sylvain.cadilhac@freepro.com>
|
|
Plugin is still in experimental state. No reason why it needs
to be default enabled.
Type: fix
Change-Id: Ibf1810215d4c8079a068bfc60aa7dd49306ee4e4
Signed-off-by: Ole Troan <otroan@employees.org>
|
|
Type: fix
Fixes: 0242d30
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I6e313000bccce749b813f20a52432154bfd494ed
|
|
The new arping_acd call includes the responders mac address in the reply.
Enabling a client doing address conflict detection to identify if it
is itself that is replying or that it is another host uses the IP
address.
Type: feature
Change-Id: Ia4bab2af1086f06ed71ba42e2e07368d4e330a27
Signed-off-by: Ole Troan <otroan@employees.org>
|
|
Applied the checksum delta to the source address instead of the destination address
in the RX direction.
Cleaned up tests a little.
Type: fix
Change-Id: I871f3448365587e5319dfbca6ea356935321ff9b
Signed-off-by: Ole Troan <otroan@employees.org>
|
|
In order to be able to filter on encapsulated packet, a new node
has been added to the ip4/6-unicast arcs.
Type: feature
Change-Id: I1e8ee05bc6d0fce20cadd8319c81bab260c17d21
Signed-off-by: Maxime Peim <mpeim@cisco.com>
|
|
Fifos need to be synchronously allocated once a transport like tcp
accepts a session. Since events are now delivered asynchronously,
proxy apps must explicitly register a cb function that manages
fifo allocation prior to being notified of connect event.
Type: fix
Fixes: 0242d30
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I7df973b7014e53e0766ea2bdc61e9871160bc18b
|
|
Make sure there's at least 3% space in the tx fifo before notifying vcl
of a tx event. The threshold is somewhat arbibrary but for a 4M fifo, it
now means that ~120kB of space should be available.
Should help minimize the amount of tx notifications generated by
session layer when apps are faster.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I11dd0931dca8f989000a2481f1f495bd267589c4
|
|
For the reasons of modularity and security, it is useful
to have various functionality split into processes different from VPP.
However, this approach presents the challenges of managing those processes,
and is markedly different from simply running everything within VPP process.
This plugin is an experiment in having the VPP itself start off a monitor
process which in turn starts the child processes, and restarts them if they
quit.
If the VPP process ceases to exist, the monitor process terminates all
the descendant processes and quits itself.
This allows to preserve the "single entity to manage" approach of
simply running a barebones VPP.
An example of running it:
export DPDK_CONFIG=""
export DISABLED_PLUGINS=dpdk
export EXTRA_VPP_CONFIG="fateshare { monitor ./build-root/install-vpp_debug-native/vpp/bin/vpp_fateshare_monitor command ./test1 }"
make run
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Change-Id: I66221fd7403f220d9652fe76958ca499cfd070a7
Type: feature
|
|
Wrap SESSION_EVT in do loop to avoid complaints about if statement
having no arguments which can happen if debugging for groups is not
enabled.
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I35af179b806ed47a1e20816a19291c31fdb7566a
|
|
Add an API call mpls_interface_dump() which returns a list of mpls_interface_details:
- If no sw_if_index is given, all MPLS enabled sw_if_index are returned.
- If a particular sw_if_index is given, and it doesn't exist, an empty list is returned.
- If a sw_if_index exists and has MPLS enabled, a list of that one sw_if_index is returned.
Tested:
- Create 3 loopback interfaces
- Call for ~0 and for sw_if_index 0..5 all return empty lists
- set int mpls loop0 enable
- set int mpls loop1 enable
- Call for ~0 returns 2, and the call for sw_if_index=1 and =2 (the loopbacks) returns
each a list of one sw_if_index 1 resp 2, the other values of sw_if_index return empty list
- set int mpls loop0 disable
- Call for ~0 returns 1, and the call for sw_if_index=2 (loop1) returns both a list of one
sw_if_index=2, the other values of sw_if_index return empty list
- set int mpls loop1 disable
- Call for ~0 and for sw_if_index 0..5 all return empty lists
Example Python3 API program:
```
api_response = vpp.api.mpls_interface_dump()
print(f"Response is {api_response}")
for i in [ 0, 1, 2, 3, 4, 5 ]:
api_response = vpp.api.mpls_interface_dump(sw_if_index=i)
print(f"Response[{i}] = {api_response}")
```
Type: improvement
Change-Id: If87f7d7f8972d99260e859757dbcb251c6fa54a8
Signed-off-by: Pim van Pelt <pim@ipng.nl>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Iab80e009d8717f759edb8133beaa55ed05e57bd5
|
|
fix lb static mapping
"nat44_ed_sm_o2i_add" laddr and lport
Type: fix
Signed-off-by: Wei Li <realbaseball2008@gmail.com>
Change-Id: I249a00919e8154d92cbce03f6db196c13612948f
|