Age | Commit message (Collapse) | Author | Files | Lines |
|
Type:feature
Change-Id: Ie73644aed94e58d5dce822de5000183e414401df
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: fix
Change-Id: Ic470d429f4bf1924185f720d66efe06f4727bcbd
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
clib_net_to_host_f64, clib_host_to_net_f64 are now implemented as '=',
https://gerrit.fd.io/r/#/c/20406/ set papi to match.
- all f64 api references are now wrapped with
clib_net_to_host_f64 or clib_host_to_net_f64.
IEEE f64 endianess is not defined. If clib_net_to_host_f64 and
clib_host_to_net_f64 are later defined in VPP as big-endian, it is
a single character change in the papi vpp_serializer.
Note: This breaks the api in a manner that would not be detected by
the flag day initiative. The scope is small. This only impacts map.api,
which applied the u64 transformation, while the gbp api uses '='.
The implementation of "=" raises issues for the papi socket implementation
if used between systems of differing endianess. See Vratko's comments.
- Added get_f64_endian_value() to api to allow client to verify endianess of f64's.
Type: fix
Depends-on: https://gerrit.fd.io/r/#/c/20484/
Change-Id: I00fc64a6557ba0190398df211aa0ea5c7eb101df
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: feature
ip4_local_check_src() was overwriting vnet buffer opaque data
on the adjacency for packets with "local" (dpo-receive) destination
addresses.
Retain the dpo receive index in vnet_buffer()->adj_index[VLIB_TX].
This can allow a graph node to distinguish the interface where the
destination address is configured from the interface where the
packet was received. This can be useful in correctly handling
packets that have been sent to an address configured on a loopback
interface.
Change-Id: I52a942e85b5302b338a2d0404a37c5ea1a99e89f
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: feature
Change-Id: I1369859be0a722ea37e5d3ecb35dee5684fc69f8
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: test
Change-Id: I0a58cc19bdfb73eabadbf6eb49b57e8db96959b5
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Change-Id: Iafcf85315c73bcd73af20bd84b1ccba030e2065b
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
- Replaces the need to screen scrape "show log".
- Adds an api to return the system time. When running over a socket, the
api client may have different time than the vpp host.
expected use:
vpp_time_before_command = self.vapi.show_vpe_system_time_ticks().vpe_system_time_ticks
<run some commands>
log_output = self.vapi.log_dump(start_timestamp=vpp_time_before_command)
Depends-on: https://gerrit.fd.io/r/20484
Depends-on: https://gerrit.fd.io/r/#/c/19581/
==============================================================================
TestVpeApi
==============================================================================
log_details(_0=838, context=3, timestamp_ticks=2.4954863503546518e+48, level=<vl_api_log_level_t.VPE_API_LOG_LEVEL_WARNING: 4>, timestamp=u'2019/07/04 20:35:41:281', msg_class=u'buffer', message=u'vlib_physmem_shared_map_create: clib_mem_create_hugetlb_fd: open: No such file or directory\n\n')
log_details(_0=838, context=3, timestamp_ticks=1.6101902879480125e+159, level=<vl_api_log_level_t.VPE_API_LOG_LEVEL_WARNING: 4>, timestamp=u'2019/07/04 20:35:41:281', msg_class=u'buffer', message=u'falling back to non-hugepage backed buffer pool')
test_log_dump_default (test_vpe_api.TestVpeApi) OK
log_details(_0=838, context=13, timestamp_ticks=2.4954863503546518e+48, level=<vl_api_log_level_t.VPE_API_LOG_LEVEL_WARNING: 4>, timestamp=u'2019/07/04 20:35:41:281', msg_class=u'buffer', message=u'vlib_physmem_shared_map_create: clib_mem_create_hugetlb_fd: open: No such file or directory\n\n')
log_details(_0=838, context=13, timestamp_ticks=1.6101902879480125e+159, level=<vl_api_log_level_t.VPE_API_LOG_LEVEL_WARNING: 4>, timestamp=u'2019/07/04 20:35:41:281', msg_class=u'buffer', message=u'falling back to non-hugepage backed buffer pool')
test_log_dump_timestamp_0 (test_vpe_api.TestVpeApi) OK
test_log_dump_timestamp_future (test_vpe_api.TestVpeApi) SKIP
test_show_vpe_system_time_ticks (test_vpe_api.TestVpeApi) SKIP
==============================================================================
TEST RESULTS:
Scheduled tests: 4
Executed tests: 4
Passed tests: 2
Skipped tests: 2
==============================================================================
Test run was successful
Type: feature
Change-Id: I893fc0a65f39749d2091093c2c604659aadd8447
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Refactor both policy and policy-dpo nodes so they share the same code
for contract & acl lookup and for tracing.
This should help to implement new policy schemes.
Type: refactor
Change-Id: If5704bda708838eb01516dd39473d9bf248cfdf6
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
from the draft:
3. Backward Compatibility
VXLAN [RFC7348] requires reserved fields to be set to zero on
transmit and ignored on receive.
Change-Id: I98544907894f1a6eba9595a37c3c88322905630e
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: feature
improve the tracing from:
00:00:01:259665: pg-input
stream pcap3, 42 bytes, 3 sw_if_index
current data 0, length 42, buffer-pool 0, ref-count 1, trace handle 0x0
ARP: 02:03:00:00:ff:02 -> ff:ff:ff:ff:ff:ff
request, type ethernet/IP4, address size 6/4
02:03:00:00:ff:02/172.16.3.5 -> 00:00:00:00:00:00/172.16.2.1
00:00:01:259690: ethernet-input
frame: flags 0x1, hw-if-index 3, sw-if-index 3
ARP: 02:03:00:00:ff:02 -> ff:ff:ff:ff:ff:ff
00:00:01:259702: arp-input
request, type ethernet/IP4, address size 6/4
02:03:00:00:ff:02/172.16.3.5 -> 00:00:00:00:00:00/172.16.2.1
00:00:01:259710: error-drop
rx:pg2
00:00:01:259717: drop
null-node: blackholed packets
to
00:00:01:283323: pg-input
stream pcap3, 42 bytes, 3 sw_if_index
current data 0, length 42, buffer-pool 0, ref-count 1, trace handle 0x0
ARP: 02:03:00:00:ff:02 -> ff:ff:ff:ff:ff:ff
request, type ethernet/IP4, address size 6/4
02:03:00:00:ff:02/172.16.3.5 -> 00:00:00:00:00:00/172.16.2.1
00:00:01:283348: ethernet-input
frame: flags 0x1, hw-if-index 3, sw-if-index 3
ARP: 02:03:00:00:ff:02 -> ff:ff:ff:ff:ff:ff
00:00:01:283360: arp-input
request, type ethernet/IP4, address size 6/4
02:03:00:00:ff:02/172.16.3.5 -> 00:00:00:00:00:00/172.16.2.1
00:00:01:283369: arp-disabled
request, type ethernet/IP4, address size 6/4
02:03:00:00:ff:02/172.16.3.5 -> 00:00:00:00:00:00/172.16.2.1
00:00:01:283374: error-drop
rx:pg2
00:00:01:283380: drop
arp-disabled: ARP Disabled on this interface
Change-Id: I49b915b84cf56d6c138dedd8a596c045c150c4fb
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Removed sctp buffer metadata from vnet/buffer.h, added it to the
plugin. Add registration APIs for plugin-based vlib_buffer_opaque /
opaque2 decoders, used by "pcap dispatch trace ..." for display in the
wireshark dissector.
Type:refactor
Not actively maintained.
Change-Id: Ie4cb6ba66f68b3b3a7d7d2c63c917fdccf994371
Signed-off-by: Florin Coras <fcoras@cisco.com>
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Type: feature
Change-Id: Icb3c574100cde95ab5be4923c8739889cf7e48c6
Signed-off-by: Vladimir Kropylev <vladimir.kropylev@enea.com>
|
|
Type: fix
Fixes: cfc7a107e6cb8be6e7c53a08e23a146c431c8e90
Change-Id: I341cbc94271ab89c3c643756a9c04b790cef8591
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: feature
Notify cc algos that new data is sent on a connection that was
apparently idle.
Change-Id: I892e5e9bb5b88d791265ffbbefce6f9694d01970
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type:feature
Change-Id: Iedefe87555f0a0033abed8569bc2995c8f523d7e
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type:feature
Change-Id: Ibe1a4c555b55fb929d55b02599aaf099ed522cdf
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change gbp-ext-itf API to create anonymous ext-itf through the same API
as non-anonymous instead of a new API
Type: refactor
Change-Id: I381ff2a5bcd55276793df78ca891334c28946cd0
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: style
Change-Id: Ia50867a853388d9f69571815ddcdaadfc47206bc
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
|
|
- Fix typo
- Use same prefix on all error messages
- Fix time arg parsing
Type: fix
Change-Id: I27334ada47d8512d2b43ce770a55f87081af2a1e
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Type: fix
Ticket: VPP-1649
Change-Id: I93a393eca80065c379035478500e75e855f39b12
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
The fix uses memset to zero after alloc,
as sizing of source string is not obvious.
Function vl_msg_api_alloc_zero is added (and used),
so similar bugs can be fixed easily.
Type: fix
Ticket: VPP-1716
Change-Id: I3b20040d0de4222686c58779f2c0af78c5543504
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Add SESSION_IO_EVT_RX handling in session_send_evt_to_thread to allow
internal apps to send rx events ("tx notifications") to quic.
Add a call to quic_send_packets in quic_custom_app_rx_callback to
ensure QUIC ACKs are sent if there is no other activity on the
connection.
Type: fix
Change-Id: I885e01e6475e5b0274f274e9dd34d4a771719e69
Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
|
|
Type: feature
Change-Id: Ice8fc0da6450d2aa8ba63ca1277393ac3605aa2c
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: feature
Change-Id: I04be003bd86f828ec387dd0309bebcbf0a041e3a
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Needed to set f64 default values.
Type: feature
Change-Id: Ic58ebc0d9d890bf0e7821894285e61a5bee13199
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
whole route
Type: fix
Fixes: 097fa66b
Change-Id: I017ab5797670eb278c27c6e306cd8cadaacddf9d
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
- make sure that chunks and the rbtree are initialized if fifo segment
allocates multiple chunks for the fifo.
- ensure head/tail chunks are updated on all enqueue/dequeue events,
including when dropping data.
- more unit tests
Also fixes dequeue drop updates of head chunk.
Change-Id: I77f3550bc4e8b4e077f80ea87fe82b83ed013aeb
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: fix
Change-Id: Ie085713f45672e112993638e01cdb325f451020a
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type:fix
Change-Id: Ia8f3496bf24a7dbe0a295b038aa6dfa24f034989
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
New coverity toolset, new set of squawks to fix
Ticket: VPP-1649
Type: fix
Change-Id: I2a7e4c42b101c6c79c01b150b2523ce3d5d62354
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
An anonymous l3-out subnet is a locally attached l3-out subnet, and
differs from regular l3-out subnets in the way adjacencies are managed.
It is required for the anonymous l3-out external interfaces to correctly
classify locally attached l3-out hosts.
Type: feature
Change-Id: Ie7bc88b1f22abc4d0b46db5f3cfbf208bc53ba5f
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
So far, GBP l3-out packets classification & policy relied on programmed
EP. All traffic to/from l3-out must go through a known EP.
This patch introduces a new feature where l3-out next-hops are only
known by their subnets (l3-out prefixes). As there are no longer known
EPs to program, an interface must be configured as external anonymous
l3-out. Packets classification & policy on this interface will rely on
the external subnets programmed in the BD VRF.
Note that contrary to all other interfaces in a GBP BD, external
anonymous l3-out interfaces have BD L2 learning turned on and rely on
ARP/ND.
Type: feature
Change-Id: Ieedb29dff4e967d08c4301e82d06bff450a63e5f
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Disable L2 BD learning for each GBP interface instead of at the bridge
level. This does not change the current behavior (learning is disabled
for all GBP interfaces) but enables turning it on selectively for future
features such as anonymous l3-out.
Type: refactor
Change-Id: Id88644277941d703600acf97d49cbc3332ae3f68
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Change-Id: I678f523f058165030572d9cd395802b772db9ed7
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Reported by coverity.
Change-Id: Ic84ac8c373c4c834bfddbf3ca08e2cfa2152e2ae
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type:fix
Also cleanup worker fds on error. Reported by coverity
Change-Id: I52cf77ca90e9ba1cc8ee9ddb3edaeabdc073beda
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type:fix
Reported by coverity.
Change-Id: Ie623c5aa3ef54b649039c5ffa10476373c532825
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: fix
Found by coverity.
Change-Id: Ibfc753d2c42219d275e3722d6ce1ef0cec189adf
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
When looking for a connected fib entry matching the ARP destination,
there can be other DPO interposed prior to the connected one.
Type: fix
Change-Id: I9b4ab387fb08acf9879d5fda3791e6572a099492
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type:fix
Fixes: cb54e3c
Change-Id: I3120eaabdc00a6c1248cf7eb81f2075983836dfd
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: feature
Change-Id: I01772cfc3a0118a5c49bf346339788824e6931b2
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Assuming 2500 50 char lines:
string_concat elapsed: 5.919933e-04
string_join elapsed: 2.830029e-04
string_concat size: 156,312,500
string_join size: 125,000
Type: refactor
Change-Id: I0a400265426bde492e9a651d24996ddcfe954aa1
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
IGMPv3 sends a variable length of sources in a query. Today if the
amount of data on the wire does not exactly match that required for the
number of sources the packet is dropped.
Relax this check and instead accept the packet is the amount of wire
data is equal or greater than the number of sources.
Some devices on the wild internet pad small packets.
Type: feature
Change-Id: I102682814b38c0a0614d71816c9a286d90b834df
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
00:00:00:814640: pg-input
stream pcap0-sw_if_index-1, 42 bytes, 1 sw_if_index
is changed to:
00:00:00:814640: pg-input
stream pcap0-sw_if_index-1, 42 bytes, sw_if_index 1
Type: style
Change-Id: I9bb32494c9c1d08bc7588f088ed67a60ed3236dd
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Memory is dirt cheap. But there is no need to throw it away.
Type: fix
Change-Id: I155130ab3c435b1c04d7c0e9f54795b8de9383d9
Signed-off-by: Steven Luong <sluong@cisco.com>
|
|
Type: refactor
Change-Id: I651db44acdcb666a9c63e1037352cf88c68795b5
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
* structure alignment and padding issues
Type: fix
Change-Id: Ic7c2a8cb5a5526902463f3b4d2d93284b454ab6f
Signed-off-by: Vijayabhaskar Katamreddy <vkatamre@cisco.com>
|
|
Type: refactor
Change-Id: I791cc63e989df049104420faf74fc28f965b6648
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Makes life easier for binary API language bindings
Type: fix
Change-Id: Ib459274fda05153d01cbb7bc328a8407e3ee5027
Signed-off-by: Dave Barach <dave@barachs.net>
|