Age | Commit message (Collapse) | Author | Files | Lines |
|
With this commit, forward the translated packet directly to the
specified next-hop if pre-resolve param is enabled in MAP-T.
Type: fix
Change-Id: Ie26080c7820318c7982599577a4af6e4d01a0574
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
|
|
With this commit, send ICMPv6 unreachable messages back if security
check fails and icmp6-unreachables param enabled in MAP-T.
Type: fix
Change-Id: I9a8869df7763c764a1672e3faa1fde8dc13ec85a
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
|
|
Save the next session timeout when sweeping sessions for cleanup so that
we can avoid unnecessary runs of the sweeping algorithm.
Type: fix
Change-Id: I736d00f2dfe242af10f963fbe34b11128f8b0613
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: improvement
Change-Id: I07c7e1c154583906ac9af958f22ed9a1be382f4a
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Type: fix
Change-Id: I76bed5ce2df897d0e8e822ee1244018b0e39494d
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: fix
Change-Id: I0677f46dfa22c8abab7f311230a09ef1cd8ac335
Signed-off-by: Neale Ranns <nranns@cisco.com>
(cherry picked from commit 02d5a67d39cbb8f1865227afdc79533578067b8d)
|
|
Type: fix
Change-Id: I429351f04a2865be4a289a3021277f9b2ced902b
Signed-off-by: Yu Ping <ping.yu@intel.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I2799ac9723ec3e7effe910bba401fc486c552cac
|
|
Type: fix
When async is enabled and request is inflight, delay close oepration
Change-Id: I713078fe9832c1599e8860fc0a6bb98588f20943
Signed-off-by: Yu Ping <ping.yu@intel.com>
|
|
Type: improvement
Change-Id: I4d8ca04840845e1ba631e4260e155df2486155e6
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: refactor
Not maintained
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I5568ecf1161b63cd0f314e2b1503e350e214e51b
|
|
Type: improvement
Show simple and chained handler details on a single line.
Change-Id: I5ad807a4d3608fc38c1134f564755d5751c30070
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
This patch adds support for test cases with arbitrary long plaintext.
Type: feature
Change-Id: I48cd3642e30cc49eabc196c45d7f73c484e93057
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I3de653fd90b8030125b627f751c7fb665ade5aee
|
|
Type: feature
Change-Id: Ia65caf38988c7e860e6d028f93659916825ef16b
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Without this, _details_reply messages also end up defined;
which is not intended, as there are no _details_t_handler functions.
Type: fix
Fixes: 39e9428b90bc74d1bb15fc17759c8ef6ad712418
Change-Id: Id052b00b00623ca92e5ddce4cc5e1bdfbb1031db
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Type: fix
Ticket: VPP-1837
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I402b1b06db736b2a7a242ce70ffd409c7c0a4fc2
|
|
Use exponential smoothing. Each sample has a half-life of 1
second. reported_rate(t) = reported_rate(t-1) * K + rate(t)*(1-K)
Sample every 20ms, i.e. 50 samples per second
K = exp (-1.0/20.0);
K = 0.95;
Type: feature
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I9aea5dd5fecfaefffb78245316adb4bf62eb2bd4
|
|
Type: feature
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ie4bd68a387f706b3e6868bece2ec4c8c1d92a9c3
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I93067054631d6ae2411a7b08d7b681aed7a121b2
|
|
vextq_u8(...) reuqires constant value so instead of
inline function we need to use macro.
Type: fix
Signed-off-by: Damjan Marion <dmarion@me.com>
Change-Id: I9c1d878c9ec750f0ed5b5eac4dffde50e97e7357
|
|
Type: docs
Change-Id: Id1972fd1d0769f26ee73db326c22c6a57eb6ceab
Signed-off-by: Yu Ping <ping.yu@intel.com>
|
|
Fix a bug that caused some input packets to be dropped due to errors of
the type 'ip4 length > l2 length'. The change is related to the second
call to the rdma_device_input_bufs() function that happens when the end
of the ring buffer is reached.
Type: fix
Change-Id: I332d69ab22242b3443a0baca6e5dd86349a54765
Signed-off-by: Elias Rudberg <elias.rudberg@bahnhof.net>
|
|
Type: feature
Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com>
Change-Id: I1d4fe75e5faf3fa2086d11020828345b173ebd03
|
|
Add an ALWAYS_ASSERT (...) macro, to (a) shut up coverity, and (b)
check the indicated condition in production images.
As in:
p = hash_get(...);
ALWAYS_ASSERT(p) /* was ASSERT(p) */
elt = pool_elt_at_index(pool, p[0]);
This may not be the best way to handle a specific case, but failure to
check return values at all followed by e.g. a pointer dereference
isn't ok.
Type: fix
Ticket: VPP-1837
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Ia97c641cefcfb7ea7d77ea5a55ed4afea0345acb
|
|
Type: refactor
Change-Id: I04e71a64e676910dc4c6cbc1ab54ffb0c29aa5b9
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
ip4 gtpu cli/api (using flow infra) to create flows and enable them on
different hardware (currently tested with ice)
to offload a gtpu tunnel onto hw:
set flow-offload gtpu hw TwentyFiveGigabitEthernet3/0/0 rx gtpu_tunnel0
to remove offload:
set flow-offload gtpu hw TwentyFiveGigabitEthernet3/0/0 rx gtpu_tunnel0 del
TODO:ipv6 handling
Type: feature
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I8e356feeb0b16cfeadc1bbbe92f773aa2916e715
|
|
Type: improvement
IKE will bring the tunnel up ince the negociation is complete and bring
it down when the session ends. It is the clinets responsibility to
manage the state of the tunnel before and after these events. So to
prevent any unencrpyted traffic egressing the tunnel before the session
is negpciated, the tunnel should be in the down state when it a
associated with the IKE session.
Change-Id: I8aee593c79ca006d6ab08f9fa560fbbf6f8dcc16
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
vpclmulqdq is introduced on intel icelake architecture and
allows computing 4 carry-less multiplications in paralled by using
512-bit SIMD registers
Type: feature
Change-Id: Idb09d6f51ba6f116bba11649b2d99f649356d449
Signed-off-by: Damjan Marion <damjan.marion@gmail.com>
|
|
Use below sysfs files to check which numa node a specific cpu_id belongs to.
/sys/devices/system/node/online
/sys/devices/system/node/node0/cpulist
/sys/devices/system/node/node1/cpulist
Type: fix
Change-Id: I124b80b1fd4a20dd7bd76f0ae27d5ab23a3a8ff1
Signed-off-by: Lijian Zhang <Lijian.Zhang@arm.com>
|
|
Type: fix
Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com>
Change-Id: I19cdd2055ea494fc36628b4a94fc56742c1d1a8a
Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com>
|
|
Type: fix
Change-Id: I1a20fea56f1ba1fada7c7ce96ea333bf097b1273
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: fix
Change-Id: I50329bda365d98f9f9d56a58187fb4fb2a4eb461
Signed-off-by: Yu Ping <ping.yu@intel.com>
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Id931f3f308a01788d222d0d62f26f5c579321c6a
|
|
Type: docs
Change-Id: I171903bd3fd3219ad0e1ebd79a6dbf6f094d9cb8
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I60be191866d20721951ad22f571a2a3275511e12
|
|
Type: fix
Ticket: VPP-1837
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I0d164147173b452fee7e720e01e6a9991f43b64a
|
|
While TSO is supported for Intel NIC, Cisco VIC does not work.
The problem is due to txmode offloads is not properly set for
the Cisco VIC when enable-tcp-udp-checksum is configured.
Type: fix
Ticket: VPP-1838
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I72c41db9b327ed8d08ef70d74e8cc6206d4a102f
|
|
Type: fix
this patch fixes mark flow deletion crash issue, see below
test flow add src-ip any proto udp src-port 111 dst-port 222 mark 100
test flow enable index 0 1/1
test flow disable index 0 1/1
test flow enable index 0 1/1
test flow disable index 0 1/1 -> [crash]
This is because the code resets a wrong vector in flow lookup entry
recycle logic. See function dpdk_flow_ops_fn().
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I2b0a1e531931ab25541d672d88da18dc2289f1ce
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I7a4a4a52c3e4ad47aabb2ef5f53a0e0bb7e71690
|
|
Type: feature
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I9dafe564229095d50285276a654f4983f93faff2
|
|
Type: refactor
Change-Id: I61e25942de318d03fb3d75689259709d687479bc
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I756170bd799d1f482186cbb4b5dff9373ae6e08f
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Idb513232e7b091c8f767726bfa1deb10a7e3b751
|
|
Type: feature
Add a new plugin to support HA using VRRPv3 (RFC 5798).
Change-Id: Iaa2c37e6172f8f41e9165f178f44d481f6e247b9
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
This allows us to combine 2 XOR operations into signle instruction
which makes difference in crypto op:
- in x86, by using ternary logic instruction
- on ARM, by using EOR3 instruction (available with sha3 feature)
Type: refactor
Change-Id: Ibdf9001840399d2f838d491ca81b57cbd8430433
Signed-off-by: Damjan Marion <damjan.marion@gmail.com>
|
|
Can happen if a connection is reset before fully accepted.
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I0ae68d71b66722dd19ca6f1cee44a080e5ff4447
|
|
Type: feature
Change-Id: I4f96b0af13b875d491704b010328a1814e1dbda1
Signed-off-by: Damjan Marion <dmarion@me.com>
|
|
In some cases of using vfio-pci driver, it should be required
to enable pa or va mode. Without it, rtl_eal_init unable to
allocate memory required. Debugging told that iova-mode pa/va
could help. And it helps.
This patch allows to pass iova-mode to vpp startup.conf
Type: feature
Change-Id: I36b87f5d3d141891b37cda2c306d50433954a34a
Signed-off-by: Vladimir Ratnikov <vratnikov@netgate.com>
|
|
Type: fix
Change-Id: I6011f5d6eae79019d3c16a260a9bedf0a76d2151
Signed-off-by: Neale Ranns <nranns@cisco.com>
|