summaryrefslogtreecommitdiffstats
path: root/src
AgeCommit message (Collapse)AuthorFilesLines
2020-05-17ip6-nd: correct set-ip6-nd-proxy CLI short_helpIgnas Bacius1-1/+1
Type: fix Signed-off-by: Ignas Bacius <ignas@noia.network> Change-Id: Id99a15272f6f12a724a4cfd9de461f1aa6a6a634
2020-05-16vppinfra: use byte swap builtinsDamjan Marion1-41/+3
Type: improvement Change-Id: I438206513b3cc3dedc0241b43c4ce037afa83e2b Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-05-16vppapigen: add assert for python versionOle Troan1-2/+4
The recent introduction of f-strings require >=Python3.6 Fix a couple of pycodestyle warnings. Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: Id9e375bb8febb157d7f9d7fa21808724770df6f8
2020-05-16l2: L2/L3 mode swicth cleanup and l2-patch fixJohn Lo4-31/+16
Cleanup L2/L3 mode switch to not redirect to/from ethernet-input node as it is no longer necessary. L2 patch should use sw_if_index for device feature enable/disable. Type: fix Signed-off-by: John Lo <loj@cisco.com> Change-Id: I0f24161d027b07c188fd1e05276146f94c075710
2020-05-16misc: fix typo in set-ipfix-exporter CLI short_helpIgnas Bacius1-1/+1
Type: fix Change-Id: Id6687780b9a740323bd2eef58447864e70dc0235 Signed-off-by: Ignas Bacius <ignas@noia.network>
2020-05-15misc: fix ubuntu 20.04 python depsDamjan Marion4-10/+37
Type: fix Change-Id: I9cdfbffd6333d090f970422bf047aaa90c1e4c65 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-05-15vppinfra: remove trailing whitespace in longjmp.SDamjan Marion1-110/+110
Type: refactor Change-Id: I2acbd864186c1d7694701c047ba72f58750a8558 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-05-15vlib: restore commands for non-interactive sessionsBenoît Ganne1-8/+13
'quit' and 'show terminal' are valid for non-interactive sessions too. Type: fix Fixes: a58be82dda89d6496f92e451b42eee31f0cf47b4 Change-Id: Ib63244c7b64ad2e30c257ed19e982295f59bfffa Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-05-15vcl: remove udpc transportFlorin Coras2-9/+1
Type: refactor Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I145ff3301f168973c4f7f32c337bbcac47900705
2020-05-15misc: removed executable bits from source filesRay Kinsella26-0/+0
Identified and removed executable bit from source files in the tree. find . -perm 755 -name *.[ch] -exec chmod a-x {} \; Type: improvement Signed-off-by: Ray Kinsella <mdr@ashroe.eu> Change-Id: I00710d59fcc46ce5be5233109af4c8077daff74b
2020-05-15session: track detached listener segment managersFlorin Coras4-7/+77
Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Iae734a526d2e7befd9738054d028df0062b67000
2020-05-15g2: fix the g2 build for Ubuntu 20.04Dave Barach1-2/+1
Shut off deprecated declaration warnings Type: fix Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I65ea4bbc4d5ee5a11d4e8f554f414f57944c7e1c
2020-05-15ikev2: add support for NAT traversalFilip Tehlar5-87/+292
Type: feature * initiator behind NAT supported * tested with static NAT mappings * works only with pre-configured tunnels The pre-configured tunnel has to be defined as follows: initiator (i) side: src=ip(i) dst=ip(r) responder (r) side: src=ip(r) dst=ip(nat) Change-Id: Ia9f79ddbbcc3f7dc8fde6bbeca2a433e3b784e94 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2020-05-14tcp: fix bogus time update due to missing castFlorin Coras1-1/+2
Type: fix Seems clang needs explicit casting to u64 of u64 and f64 multiplication before truncating to u32 Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Ib0d7a33d4c5e68577e401e854fc3e55e0723da93
2020-05-14nat: unhide testsKlement Sekera1-5/+5
Parallel merges introduced two test clasess with a same name. Rename latter, so that former is seen (and run) by test runner again. Type: fix Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: I47772b41bb940bfdda4536cdd1f9b5e3768ca18b
2020-05-14vcl svm: fix rx event losshanlin1-2/+5
When vcl_epoll_wait_handle_mq handles rx events exceeding maxevents, VPP will not signal because cursize > 0, and the remaining rx events cannot be triggered because the eventfd event has been read. Therefore, we should dequeue all events until cursize = 0. And then handle msg up to maxevents with vcl_epoll_wait_handle_mq_event and those beyond with vcl_handle_mq_event. Type: fix Signed-off-by: hanlin <hanlin_wang@163.com> Change-Id: I8a0c87cb41c837deb8284b40f668cc3c7d9d6e56 Signed-off-by: hanlin <hanlin_wang@163.com>
2020-05-14nat: "users" dump for ED-NATKlement Sekera3-0/+170
Since the removal of "users" concept in ED-NAT nat44_user_dump API returns empty array. This brings back previous behaviour at a considerable runtime cost until a better API is introduced. Type: improvement Change-Id: I5a45923cfeb6b8ebe6fc906601264d6567386991 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2020-05-14lisp: API cleanupOnong Tayeng3-41/+6
Removing the comments around eid_type which seem to have been overlooked by the original patch https://gerrit.fd.io/r/c/vpp/+/24663. Type: refactor Signed-off-by: Onong Tayeng <otayeng@cisco.com> Change-Id: I48e1993cf8869cb32e159d1956f3ec1e5943e33f
2020-05-14vlib: fix unix cli commands crash without sessionBenoît Ganne1-15/+23
If a cli command is run while there are no cli session, then cm->cli_file_pool will not be initialized and we should not try to operate on it. Type: fix Change-Id: Iaea15a23f7efd5b17fab13e6c1cbb3a9a34080e0 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-05-14ikev2: use u32 in unformatFilip Tehlar1-1/+1
Type: fix Change-Id: If240bd8b3579678c0a6b5ea723946a35b53e5c31 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2020-05-14dpdk: fix crash with chelsio pmdBenoît Ganne1-6/+12
cxgbe PMD initializes its control channel as part of dev_configure(), and trying to get link status prior to it will lead to a crash. DPDK documentation loosely hints that we should not call any device function before dev_start(), call link_state() only for the relevant PMDs. From DPDK API documentation: The functions exported by the application Ethernet API to setup a device designated by its port identifier must be invoked in the following order: rte_eth_dev_configure() rte_eth_tx_queue_setup() rte_eth_rx_queue_setup() rte_eth_dev_start() Then, the network application can invoke, in any order, the functions exported by the Ethernet API to get the MAC address of a given device, to get the speed and the status of a device physical link, to receive/transmit [burst of] packets, and so on. Type: fix Change-Id: I12d2ab4d84e6bd72a9f695447e86f3222929c804 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-05-14memif: 14 bytes extra overhead issue fixed.Mrityunjay Kumar1-2/+2
Type: fix Signed-off-by: Mrityunjay Kumar <kumarnitp@gmail.com> Change-Id: I31cc5e853b57e285064647503231b251e5152d3f
2020-05-14nat: remove unused codeKlement Sekera2-3/+0
Type: improvement Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: I95286d6723fd1860bf6bb0e81c474d732ab25121
2020-05-14nat: ED: store both thread&session idx in hashKlement Sekera10-198/+316
By storing thread and session index in hash table we are able to skip multiple hash lookups in multi-worker scenario, which were used for handoff before. Also, by storing sesion index in vnet_buffer2, we can avoid repeating the lookup after handoff. Type: improvement Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: I406fb12f4e2dd8f4a5ca5d83d59dbc37e1af9abf
2020-05-14nat: fix segv if out of ports in ed modeAlexander Chernavin2-1/+47
Type: fix Change-Id: Ife726d2f6baaa3516c209011183f39670cf6a55d Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
2020-05-14ip: fix interface ip address del sw_if_index checkyedg4-6/+27
Type: fix Signed-off-by: Ye donggang <yedg@wangsu.com> Change-Id: Ia9f72ff2be455ecd4ff3d16e884c5a50f9df69fe
2020-05-13sr: fix srv6/srv6-ad/srv6-as promisc mode switchJohn Lo3-22/+32
Calling ethernet_set_flags() to switch interface to/from promiscuous mode must use use hw_if_index instead of sw_if_index. Type: fix Signed-off-by: John Lo <loj@cisco.com> Change-Id: I72da286b913893227e32193ee11fbbc56e04804d
2020-05-13gso: remove ordering dependency on esp-encrypt-tunNeale Ranns1-2/+2
Type: fix ... it's not a feature anymore Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: Ifbcaf7d832aa76336feb0556d0dc7d2002f19c35
2020-05-13nat: fix broken buildKlement Sekera1-1/+1
Type: fix Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: I2a70db3a25450e014adaed84989f4da9bb77b14d
2020-05-13nat: fix LRU blocked by inactive sessionKlement Sekera10-161/+391
This fixes a situation where long-lived inactive session blocks LRU list. Solution is to have multiple LRU lists based on session type. This helps because session timeout is same for all sessions of same type. Type: fix Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: I5e54b2aab73b23911d6518d42e8c3f166c69a38c
2020-05-13nat: perf improvement - replace branchy codeKlement Sekera32-451/+401
Use a lookup table instead. Type: improvement Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: Ia8461099828bb8824bf016201f135e6b69c444d1
2020-05-13interface: fix the checksum offload in quad loopMohsin Kazmi1-20/+25
Type: fix In quad loop, checksum will be calculated for all four packets, if one packet needs checksum computation, without respecting their respective flags. This patch fixes it. Change-Id: I479b420ba0dcbd178ea4180bf05a0e55a6b13843 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-05-13feature: Config end nodes are user specificNeale Ranns5-24/+41
Type: fix it is possible for a user to change the end node of a feature arc, but this change should only apply to that 'instnace' of the arc, not all arcs. for example, if a tunnel has its ipx-output end node changed to adj-midchain-tx, this shouldn't affect all ipx-output arcs. obviously... Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I41daea7ba6907963e42140307d065c8bcfdcb585
2020-05-13bonding: fix the GSO flagsMohsin Kazmi1-2/+8
Type: fix Only add GSO and Checksum offload flags when gso is enabled. Change-Id: I58945a4ffbb9a0e6a8640fc01424c63feef16306 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-05-13ipsec: Support 4o6 and 6o4 for SPD tunnel mode SAsNeale Ranns3-38/+120
Type: feature the es4-encrypt and esp6-encrypt nodes need to be siblings so they both have the same edges for the DPO on which the tunnel mode SA stacks. Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I2126589135a1df6c95ee14503dfde9ff406df60a
2020-05-13nat: handoff next node feature fixFilip Varga8-48/+160
Type: fix Change-Id: I14e323e7bb1db7a3d40668212535c07504374e59 Signed-off-by: Filip Varga <fivarga@cisco.com>
2020-05-13ikev2: fix removing of expired SAsFilip Tehlar1-1/+1
Type: fix Change-Id: Idf9b0ffb4e3a0113bece80d1195192bdf46feb89 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2020-05-12api: use malloc for rx thread arg instead of heapFlorin Coras1-2/+2
Type: fix Avoids issues if thread with non-zero __os_thread_index attaches to binary api. Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Ib981f12c867fdee7590391ec43128145bb1abce6
2020-05-12vcl: de-init vcl on destroyFlorin Coras1-0/+1
Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: If3372e3edd403240c2c9da746246170549a3e644
2020-05-12tcp: avoid rcv wnd less than mssFlorin Coras1-6/+4
Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I84ec1c91a3a7b2195aad58923fa6f17f551444cb
2020-05-12lacp: missing endian conversions for trace packet formatSteven Luong1-2/+2
Fix a couple endian conversions for displaying Marker Protocol packet in the trace Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: I746a67fb6143b5ad52bc4af9604ff8760dbdec9b
2020-05-11crypto-native: properly deal with broken or outdated toolchainsDamjan Marion5-42/+54
Avoids crash due to missing symbol, when build system detects toolchain which is not able to produce binaries for all targets we need.... Type: fix Change-Id: I77ee63cb8dca3c9e4e83a6235c60f1439a472444 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-05-11vlib: fix u64 error counter cli printingFlorin Coras1-3/+3
Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Ie35dc623394cfb6c358740361fd85aa0924ab187
2020-05-10ip-neighbor: fix show ip neighbor issueMichael Yu1-5/+4
Fix the issue that vppctl show ip4{6} neighbor [interface] command can't show entries correctly, example: both ip4 and ip6 entries can be shown with command: vppctl show ip4 neighbor. Type: fix Signed-off-by: Michael Yu <michael.a.yu@nokia-sbell.com> Change-Id: I229368b71cd285adce994c8290cc9d7e4c4f5aa6 Signed-off-by: Michael Yu <michael.a.yu@nokia-sbell.com>
2020-05-10ethernet: fix dmac stride errorZhiyong Yang1-1/+1
Type: fix Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com> Change-Id: I617fb365def22a28d48f75013dea38f8e1703a44
2020-05-09vppapigen: api crc checkerOle Troan2-23/+67
crcchecker is a tool for enforcement of the binary API. 1. Production APIs should never change. 2. An API can be deprecated across three release cycles. Release 1: API is marked as deprecated. option deprecated="vyy.mm"; option replaced_by="new_api_2"; Release 2: both old and new APIs are supported Release 3: the deprecated API is deleted. 3. APIs that are experimental / not released are not checked. An API message can be individually marked as in progress, by: option status="in_progress"; In the API definition. The definition of a "production API" is if the major version in the API file is > 0. extras/scripts/crcchecker.py --check-patchset # returns -1 if backwards incompatible extras/scripts/crcchecker.py --dump-manifest extras/scripts/crcchecker.py --git-revision v20.01 <files> extras/scripts/crcchecker.py -- diff <oldfile> <newfile> This patch integrates the tool in "make checkstyle-api". A future patch is required to integrate the tool in the verify job. I.e. this patch does not enable enforcement through Jenkins. Change-Id: I5f13c0976d8a12a58131b3e270f2dc9c00dc7d8c Type: feature Signed-off-by: Ole Troan <ot@cisco.com>
2020-05-09gtpu: fix coverity issueChenmin Sun1-2/+2
Fix coverity issue #210194 in gtpu-decap Type: fix Signed-off-by: Chenmin Sun <chenmin.sun@intel.com> Change-Id: I5b172c8494527e7117c4e7e7083a8473165aa40f
2020-05-08docs: fix merge damage in nat.hDave Wallace1-4/+0
Type: fix Fixes: b5a575b09 Signed-off-by: Dave Wallace <dwallacelf@gmail.com> Change-Id: I22d35159a923075243df9760f1a74e2ca74e30e1
2020-05-08vppinfra: set explicit found in search_free_list loopSteven Luong1-2/+6
While https://gerrit.fd.io/r/c/vpp/+/26948 fixed avoid using -1 to index into h->free_lists[b][l] by changing the loop counter, the check for the value of the loop counter (l < 0) cannot be trusted to decide whether we've found a large enough object within the bin or not. When the loop is terminated, the value of the variable l could be ambiguous if it equals to 0 and it is never less than 0, ie, when we bail out of the loop, we don't know if it was due to the breaking out of the condition in if ((s = f_size - size) >= 0) break; or while (l > 0); The fix is to explicitly set a variable when we have found a large enough object inside the loop to be used to test whether the loop was prematurely terminated (found == 1) or the loop just ran exhausted (found == 0) Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: I0161813fbd44dcba8982a767eac2e0930e9d77e3
2020-05-08build: various improvementsDamjan Marion7-13/+20
- add option to install only host tools - add option to specify lib and runtime dir Type: improvement Change-Id: I6356b52df459120fc9b0127948bae7679fb10e52 Signed-off-by: Damjan Marion <damarion@cisco.com>