Age | Commit message (Collapse) | Author | Files | Lines |
|
Short version: Make vppctl behave as expected when run
from scripts, or without a controlling terminal, and
especially when using it with VPP commands on its
command line ("non-interactively").
In particular, prevent the welcome banner and VPP CLI
prompt from being sent by VPP when being used in these
ways.
vppctl
------
- Improve vppctl's detection of non-interactive sessions.
- Pass non-interactiveness in the terminal type telnet option
as a value distinct from "dumb" (which means non-ANSI capable.)
- Make tty setup handling more robust.
- Only send non-interactive command once we've sent the
terminal type, to ensure correct event sequence; we need
the VPP cli session to be in line-by-line mode.
- Ignore stdin when it looks something like /dev/null.
- Skip NUL bytes received from VPP.
VPP CLI
-------
- Detect "non-interactive" terminal types and set session
parameters accordingly.
- Add an "interactive" flag that controls whether the welcome
banner and CLI prompt are sent.
- Detect if telnet options processing switched us into line
mode and act accordingly for the rest of the current input
buffer. This was causing the command string to be echoed
by the CLI editor code.
- For non-interactive sessions, send a NUL byte after the
input buffer has been processed. This is because vppctl
depends on seeing traffic before it will try to close the
session; a command with no output would cause it to hang.
NUL bytes are ignored by all decent terminals, but we have
vppctl strip them out anyway.
- Prevent certain commands from running in non-interactive
sessions since they manipulate interactive-related features.
- For interactive sessions, quench the prompt that prints on
VPP shutdown.
- Detect and handle socket errors in the CLI; sessions were
leaking.
- Pevent SIGPIPE from ever being raised; handle EPIPE instead.
We don't need VPP to die just because a socket closed just
before we try to write to it!
- Add a command to dump a list of current CLI sessions; mostly
this was to detect session leakage, but it may have some
general utility.
Change-Id: Ia147da013317180882c1d967b18eefb8519a55fb
Signed-off-by: Chris Luke <chrisy@flirble.org>
|
|
Change-Id: Ibcd2cf22348ae5a72770a8f8ad25cbe8df7fd390
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: Ie3a99f09f44ec081d9b88a213bdb8d987fb462de
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Iedcea2fb45052852666b91a21eed011f5593313d
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: Ib5d335d6130617d6135615c6c8fa8deaac971331
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
When one starts VPP, types a command, presses up rather than enter,
then types a new command, unix_cli_line_process_one() segfaults.
This is due to cf->cursor not being reset upon pressing up if the
history is empty.
Change-Id: Ie503f20a9cb551e735abb8b0f4feb8c0006d2b61
Signed-off-by: Yoann Desmouceaux <ydesmouc@cisco.com>
|
|
When given a single IPv6 address, the "tcp src-address" command incorrectly
infers the end of the range by copying sizeof(ip4_address_t) bytes from the
given address.
Change-Id: I100d5c6674d3a3980b8c018588988bdd32ff7269
Signed-off-by: Yoann Desmouceaux <ydesmouc@cisco.com>
|
|
Until now, if the stack didn't find a connection for a packet, it sent
back a reset. With the punt option enabled, packets are now enqueued to
error-punt where they can be handed off to the host os.
Change-Id: I12dea8694b8bd24c92b0d601412928aa7b8046cb
Signed-off-by: Florin Coras <fcoras@cisco.com>
Signed-off-by: Pierre Pfister <ppfister@cisco.com>
|
|
Fix dhcp_client_for_us() function to utilize rpc_call_main_thread
to call vlib_process_signal_event() to ensure proper handling
irrespective of it being called in main thread or worker thread.
Added ASSERT to vlib_process_sinal.. path to make sure it is called
in main thread.
Change-Id: I4109cc049d8e4225d896ce492ce201011dc9c911
Signed-off-by: John Lo <loj@cisco.com>
|
|
ip4-local feature arc existed but not ip6-local one.
This patch also adds node name to the 'show ip local' command and fixes
a minor include issue in vnet/ip/ip4.h file.
Change-Id: I9bb8a7159917d58f89afcce974680de20d946a70
Signed-off-by: Pierre Pfister <ppfister@cisco.com>
|
|
Change-Id: Id98b523f7b20f82291a34e73762978fa65e24140
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: I41a51bb36e31e05c76fef0b34fe006afbee27729
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
There isn't anything useful to print. Return a unique name since the
unix cli uses the returned string to create a node name. Node names
must be unique, or vpp will quit abruptly.
Change-Id: I8f85ae8fececdbfd26c729bc32c2c2007c06d1ea
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: Iff634f22d43470e2dc028387b3816257fd7b4156
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
- add preallocated segment flag
- don't remove pre-allocated segments except if application detaches
- when preallocating fifos in multiple segments, completely fill
a segment before moving to the next
- detach server application from segment-managers when deleting app
- batch syn/syn-ack/fin (re)transmissions
- loosen up close-wait and time-wait times
Change-Id: I412f53ce601cc83b3acc26aeffd7fa2d52d73b03
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I831226111d26f5c8a795e0773e23fddcddfb1613
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I0f1a051dd3b5786dc7c457bc6fc7ce4fcd0f530c
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
For routed IPsec, set the RX sw_if_index on inbound packets
to the index of the IPsec interface. When a packet is
decrypted into a new buffer, bring along the RX sw_if_index
of the encrypted packet to the new buffer.
Change-Id: I093e9d37def2082c8d2f1deb96b1c5b97126e023
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Change-Id: I1f3c0f879f636e587aa518c41e5ad99af65129a7
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I717ce3cd7c867c155de149ec56623269d26d0ff7
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Checksum offload is implemented in VXLAN encap over both IPv4 and
IPv6. It is enabled, however, only for VXLAN over IPv6 because UDP
checksum is needed only for IPv6 and optional for IPv4.
Change-Id: Ib879f4f6da7346ba5e079d321c1dfd630f5058b8
Signed-off-by: John Lo <loj@cisco.com>
|
|
Plus fixed problem with acl heap.
Change-Id: I3d91db549ebe4595f1dab9b8780f90722540024b
Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
|
|
Change-Id: Ifda4d22c9d1de210165932a0996f75cc8428ae7a
Signed-off-by: Alberto Rodriguez-Natal <natal@cisco.com>
|
|
177117: fstat() returns -1 on error; the code is
checking for any positive value instead
175142: final return could never be reached; simple
refactoring
175235,175236: Warning suppressed with an explicit
cast to (void)
174817: Final return couldn't be reached; is
is_in_order is 0 then 'rv' is already returned
above
172095,172093: If is_is_set does not get set to 1,
then return 0 has already been invoked
174405: Re-kill this (nothing sets rv)
171136: Looks like a cmd line flag to set test_bytes
was missing; added it, and refactored the
argc/argv processing to avoid two other
potential segv's
176813: Add range checking for term width/height.
First stab at a reasonable range is 1-512
for both.
175350: Fix implicit casting in shift operation
174272: Not a c+p error; try using a coverity
annotation to ignore it
174273,175320: Annotated FORWARD_NULL
Change-Id: I58d0f860fc2209f59f8d1b6b344d631b8d429ace
Signed-off-by: Chris Luke <chrisy@flirble.org>
|
|
previous mechanism was emitting duplicates of last event, when handling multiple arp queries.
tests:
* arp events sent for graps
* duplicate suppression
* verify no events when disabled
Change-Id: I84adc23980d43b819261eccf02ec056b5cec61df
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Fix coverity CIDs 176805, 176806, 176811, 176812
Change-Id: I73591c922307e7a98d38d5d92ebf37c8b2ff0145
Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
|
|
- Existing Vagrantfile is symbolic link to the
default Vagrantfile.
- In order to run the multi-host vcl test,
change Vagrantfile -> Vagrantfile.vcl_test
- Fix socket_test.sh & vppcom bugs.
Change-Id: I965b7f799135c86e989c08bf6c5909677ef38dea
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Change-Id: I83ea1eae73cb41353cacd1c1b910339d10900502
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Use buffer pre_data and existing buffer trace trajectory code to
find out dpdk buffer leakages.
Change-Id: I26a5d8bd2f23d01cb6070ffc3ddcc6d3d863b575
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
ConnectionInfo now contains pid of vpp process
pid is aquired through initial control ping during
connection creation
Change-Id: I68457770e07792d11c47bc7d8cbd0d2fd722d9b4
Signed-off-by: Matej Perina <mperina@cisco.com>
|
|
Change-Id: Iff33694fc42cc3bcc73cf1372339053a6365039c
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ia886ff2bfa2cf33ffbaa35ec89494d4300ec2769
Signed-off-by: Jerome Tollet <jtollet@cisco.com>
|
|
in order to trace session_index
Change-Id: I4433155fbe21635f8a997523e2c7900c6a7569af
Signed-off-by: dongjuan <dong.juan1@zte.com.cn>
|
|
Change-Id: Ie18580e05ec12291e7026f21ad874e088a712c8e
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
generated random ports overlap between threads
Change-Id: I7a13785e3f98b87e475426b0bd7f6bf2d9c1336c
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
- added per-interface simple/combined counters
- refactored fib/nbr API to use common registration scheme
- refactored "want_stats" and "want_interface" to use
per interface registration scheme
- fixed issues with SEGV when client disconnects abruptly.
Change-Id: Ib701bd8e4105d03548259217bfc809bd738b7c72
Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>
|
|
Change-Id: I972e6e645c3ae9cba4bb2b4e32c0272dfd67e87b
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I4b4648831551519b2ffb6f93255d28a4b8726c22
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Add doxygen tags for show/clear commands
Change-Id: Ic939c561b15b0b720a8db1ecacc17e3d74419e1d
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Missing a break statement in the case
Change-Id: I1b1e198748343bc116ee0eaf9012abc3be15c40a
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: I92de5b9ed42cda6c0438b8dc71892d322b642a70
Signed-off-by: flyingeagle23 <wang.hui56@zte.com.cn>
|
|
Change-Id: I0d74856d4fd999dd9ca5886b8375ab8dd700b8a9
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: Id7306b432a33bb0fa594b6949e65ca528d8c0916
Signed-off-by: flyingeagle23 <wang.hui56@zte.com.cn>
|
|
Change-Id: I8843e57105c6c29bcdaf1e6e3bf8e9caf6bfd2ec
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
to API calls.
Change-Id: I266eef8419fd98b9b900573ac9b032a62600ab86
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: I5a5dc0794d3398e749b64b07dfd1e2fc2230089b
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I6c5eccd4193c44604da3fd27c108defe71b38a4b
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
- do not scale syn-ack window
- fix the max number of outstanding syns in builtin client
- fix syn-sent ack validation to use modulo arithmetic
- improve retransmit timer handler
- fix output buffer allocator leakeage
- improved debugging
Change-Id: Iac3bc0eadf7d0b494a93e22d210a3153b61b3273
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
driver
Added a new macro VNET_DPDK_PORT_TYPE_VHOST_ETHER for dpdk net_vhost driver
to display VhostEthernet instead of UnknownEthernet.
Change-Id: Ie407d83ebbbd60e4d11be79f0ebc44e2867a5f3b
Signed-off-by: Steven <sluong@cisco.com>
|
|
Add support for Mellanox provider id and vendor id
Change-Id: Ib2451e69fbe949f01bcb1ee556aa3020da225610
Signed-off-by: Shachar Beiser <shacharbe@mellanox.com>
|