summaryrefslogtreecommitdiffstats
path: root/src
AgeCommit message (Collapse)AuthorFilesLines
2019-09-07ip: fix udp/tcp checksum corner casesDave Barach12-5/+1035
When checksumming chained buffers with odd lengths: insert a NULL byte, or the calculation fails. Type: fix Signed-off-by: Dave Barach <dave@barachs.net> Signed-off-by: John Lo <loj@cisco.com> Change-Id: I380f7c42897bdb28c8c29aa1c4cdaaa849cc9ecc
2019-09-06ikev2: fix crash during IKE SA Init exchangeFilip Tehlar1-6/+1
Type: fix Change-Id: If827fe348fe35d1221d29f91b7e6ea1624d13999 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2019-09-06bonding: add weight support for active-backup modeSteven Luong6-88/+327
Not all interfaces have the same characteristics within the bonding group. For active-backup mode, we should do our best to select the slave that performs the best as the primary slave. We already did that by preferring the slave that is local numa. Sometimes, this is not enough. For example, when all are local numas, the selection is arbitrary. Some slave interfaces may have higher speed or better qos than the others. But this is hard to infer. One rule does not fit all. So we let the operator to optionally specify the weight for each slave interface. Our primary slave selection rule is now 1. biggest weight 2. is local numa 3. current primary slave (to avoid churn) 4. lowest sw_if_index (for deterministic behavior) This selection rule only applies to active-backup mode which only one slave is used for forwarding traffic until it becomes unreachable. At that time, the next "best" slave candidate is automatically promoted. The slaves are sorted according to the preference rule when they are up. So there is no need to find the next best candidate when the primary slave goes down. Another good thing about this rule is when the down slave comes back up, it is selected as the primary slave again unless there is indeed a "better" slave than this down slave that were added during that period. To set the weight for the slave interface, do this after the interface is enslaved set interface bond <interface-name> weight <value> Type: feature Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: I59ced6d20ce1dec532e667dbe1afd1b4243e04f9
2019-09-06quic: fix server opening stream immediatelyAloys Augustin2-4/+19
Previously, if the first thing a server did was to open a stream and send data, this could trigger a crash on the clilent side VPP as the quic session wouldn't be allocated. Change-Id: I43990ce2a71217d6719ecae4da60111d05fbcfc0 Type: fix Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
2019-09-06tap: revert clean-up when linux will delete the tap interfaceMohsin Kazmi2-43/+0
Type: fix Ticket: VPP-1766 revert e4ac48e792f4eebfce296cfde844ee73b1abd62f Change-Id: I03feea4008a47859d570ad8d1d08ff3f30d139ef Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com> (cherry picked from commit 623a1b7053424b539a51faf866ab839d3da3f45b)
2019-09-05build: fix unsupported CMake comparison operationjialv011-1/+1
VERSION_GREATER_EQUAL is not supported before CMake version 3.7. Type: fix Signed-off-by: Jianlin Lv <Jianlin.Lv@arm.com> Change-Id: Id690b7b7c26121f9d289ebd0aaea0860be63795f
2019-09-05dpdk: fix extended statsFilip Tehlar1-1/+1
Extended stats are not displayed due to incorrect condition. Type: fix Change-Id: Ie04664e6274137462dce832bf7ee06204cd77be5 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2019-09-04bfd: API cleanupJakub Grajciar2-84/+66
Use consistent API types. Type: fix Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com> Change-Id: I4b91ebe8aadbec8b95716ed1cde4b0a13eee3a3f Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2019-09-04stats: add /if/<n>/<n>/state for lacp interface stateSteven Luong4-3/+107
Add /if/lacp/<bond-sw_if_index>/<slave-sw_if_index>/state <bond-sw_if_index> is a vector of the bond sw_if_index <slave-sw_if_index> is a vector of the slave sw_if_index Content is the integer value of the lacp actor state. The state is actually a bitfield as described in the lacp protocol spec. Type: feature Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: Ic6eca8ce2a1acd2d858e4e50b7eac1d000ea08e5 Signed-off-by: Ole Troan <ot@cisco.com>
2019-09-04memif: always enable zero-copy when creating memif using APIJakub Grajciar1-0/+3
Type: fix Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com> Change-Id: I823b6297e1d2bdd438633ec7b877960e6d8423fa
2019-09-04session: improve cliFlorin Coras7-148/+348
Type: feature Allow session cli filtering based on thread index, transport protocol, session state and range of session pool indices. For instance show session thread 1 proto tcp state ready range 0 20 verbose Shows the session ids for the first 20 tcp sessions in thread 1 that are in ready state. To avoid excessive output that could reasult in the worker barrier being held by the main thread for long periods of time, the session cli will only output: - session ids (verbose == 1) for a maximum of 50 sessions / worker - verbose > 1 details for a maximum of 10 sessions Change-Id: I2cfb351b548e2e0a1d5b4345810be613e2917d17 Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-09-04tcp: cc algos handle cwnd on congestion signalFlorin Coras3-12/+11
Type: refactor Change-Id: I15b10a22d0d0b83075a0eef5ef8c09cf76989866 Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-09-04ethernet: move dmac filtering to inline functionMatthew Smith1-56/+63
In eth_input_process_frame(), destination MAC addresses are compared to the interface hardware address in a loop. Move this to a separate inline function to facilitate making changes to the filtering logic more cleanly. Type: refactor Change-Id: I0978f01667e78af5214dbbc9ba223f5b84ce6b7e Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2019-09-04avf: reduce default ITR intervalDamjan Marion1-1/+1
Type: fix Fixes: b4ff07a Change-Id: I361ec71944048734b73eec700e32531fb070194e Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-09-04api: memclnt api use string type.Ole Troan4-12/+12
Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: Idad79286b7730c8e85202c4b8e675ea50f8bbc48 Signed-off-by: Ole Troan <ot@cisco.com>
2019-09-04session: avoid bihash list for session tablesFlorin Coras1-12/+38
Type: fix Change-Id: I1dbc822061f43fcc25dfa5d1728f5c7575139f45 Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-09-03ethernet: fix dmac check avx2 loop conditionMatthew Smith1-1/+1
In eth_input_process_frame(), a loop which checks the destination MAC address of received packets had a different condition for avx2 than it did for the non-avx2 version of the loop. It could result in one unnecessary execution of the loop body after all packets had been processed. Type: fix Fixes: 8d6f34e2b1cbfde5702e88686631527d5e1e10a0 Change-Id: Ib673f45917a0dea461987fdc8f0ca318b749fb1a Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2019-09-03api: enforce vla is last and fixed string typeOle Troan20-268/+266
Enforce that variable length fields are the last element of API messages. Add a 'fixed' version of string type, since dealing with multiple variable length strings turned out too painful for the C language bindings. The string type is now: { string name[64]; // NUL terminated C-string. Essentially decays to u8 name[64] string name[]; // Variable length string with embedded len field (vl_api_string_t) }; The latter notation could be made available to other types as well. e.g. { vl_api_address_t addresses[]; } instead of { u32 n_addr; vl_api_address_t addresses[n_addr]; }; Type: fix Change-Id: I18fa17ef47227633752ab50453e8d20a652a9f9b Signed-off-by: Ole Troan <ot@cisco.com>
2019-09-03stats: memory leak with per-node-counters onOle Troan1-0/+3
vlib_node_get_nodes() creates a duplicate node structure which was never freed. Type: fix Fixes: 1ddbc0138b Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: Ib1200854937faaa694b398607d2f0ba65aa81c01
2019-09-03gbp: fix set_mac() in unit testsBenoît Ganne1-6/+2
Do not use low-level sw_interface_set_mac_address() directly and use higher-level set_mac() instead, otherwise interface local_mac and configured mac are out-of-sync Type: fix Fixes: 25b049484f Change-Id: I9366e7afb95ef00e25a94ca3b0e6309871169878 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-09-03vppinfra: add bihash_init2Dave Barach2-20/+53
Add controls to list / not list a specific bihash in clib_all_bihashes, to immediately initialize a bihash. clib_bihash_init2 is now the primary API. It takes a typical args_t structure. clib_bihash_init becomes a compatibility widget. It fabricates an args_t and calls init2... Type: refactor Ticket: VPP-1758 Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: Ib3e1304884997cf7025af20bdc67a7dda290f15b
2019-09-03tap: fix tap interface not working on Arm issueLijian.Zhang3-2/+13
The VPP code tries to set all userspace memory in the table via IOCTL to VHOST_SET_MEM_TABLE. But on aarch64, the userspace address range is larger (48 bits) than that on x86 (47 bits). Below is an segment from /proc/[vpp]/maps. fffb41200000-fffb43a00000 rw-s 00000000 00:0e 532232 /anon_hugepage (deleted) Instead of setting all userspace memory space to vhost-net, will only set the address space reserved by pmalloc module during initialization. Type: fix Change-Id: I91cb35e990869b42094cf2cd0512593733d33677 Signed-off-by: Lijian Zhang <Lijian.Zhang@arm.com> Reviewed-by: Steve Capper <Steve.Capper@arm.com>
2019-09-03tcp: send rwnd update only if wnd is large enoughFlorin Coras3-7/+15
Type: feature Change-Id: I3e97e05a31806afb6b2e84ecf05fb96d285db92e Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-09-02quic: disable quic plugin by defaultAloys Augustin2-0/+5
Change-Id: I8eb243e80ff043a23cb3efae186164dad6c11ca8 Type: fix Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
2019-09-02tap: interface rx counter not increment correctSteven Luong1-1/+1
vlib_increment_combined_counter takes sw_if_index, not hw_if_index. Using hw_if_index may work as long as there is no subinterface created to cause hw_if_index and sw_if_index to differ. Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: I6db042186eeeacf32250f7ef261af8cd6f5ce56e
2019-09-02ipsec ip tcp l2: multiarch nodes cannot be declared as staticDamjan Marion9-15/+16
Credits to ray.kinsella@intel.com who spotted the issue and identified root cause. Type: fix Change-Id: I4afe74c47769484309f6aebca2de56ad32c8041f Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-09-02tls: some rework based on TLS openssl C APIPing Yu3-26/+33
Type: fix Change-Id: I5d0ac1fe6a6770ab8b3a9c366d10387718391199 Signed-off-by: Ping Yu <ping.yu@intel.com>
2019-09-02vmxnet3: interface rx counter not increment correctlySteven Luong1-1/+1
vlib_increment_combined_counter takes sw_if_index, not hw_if_index. Using hw_if_index may work as long as there is no subinterface created to cause hw_if_index and sw_if_index to differ. Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: If50412dc1e84c4f1f5b977b58d0e1aeb5ab8ebe6
2019-08-31tcp: fix rx min/max fifo size parsingFlorin Coras1-13/+14
Type: fix Change-Id: Iff4a13da654dbdf7f08bb6d0743b466a1e6be01b Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-08-30session: move svm_fifo_clear_deq_ntf to before calling the app callbackVladimir Kropylev1-2/+2
Type: fix in case the app requests another dequeue notification, it should not be cleared Change-Id: I7e94e8e30ef098f87f5e7f4880af276970ee5b37 Signed-off-by: Vladimir Kropylev <vladimir.kropylev@enea.com>
2019-08-30vmxnet3: per interface gso supportSteven Luong8-37/+26
gso option for vmxnet3 is per VPP process currently. There is no reason why we cannot provide per interface gso support. Type: feature Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: Ife962b52221191050dedd18252b859880ccd7599
2019-08-30devices: fix issue of per_interface_next_indexMichael Yu1-3/+4
Per interface, next hop graph node can be customized with vnet_hw_interface_rx_redirect_to_node function, but it doesn't work well for af-packet type interface. In current implementation, with function af_packet_set_interface_next_node invoked next hop graph node index can be set to apif->per_interface_next_index, but it's not set to next0 properly for packet processing in af_packet_device_input_fn. Type: fix Signed-off-by: Michael Yu <michael.a.yu@nokia-sbell.com> Change-Id: I8e132ddd1c3c01b6f476de78546d4a9389b3ff87 Signed-off-by: Michael Yu <michael.a.yu@nokia-sbell.com>
2019-08-30tcp: force zero window on full rx fifoFlorin Coras1-1/+4
Type: feature Change-Id: I7c5684a9f88e56fd62d83a59c14c4e4a6f096b89 Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-08-30dpdk: enable checksum offload for Intel SRIOV NIC driversJohn Lo1-0/+8
Type: fix Signed-off-by: John Lo <loj@cisco.com> Change-Id: I3ee59106ba45164a4ee3788bf4dcf5bf4c2dc1c2
2019-08-30tcp: improve mss computationFlorin Coras3-43/+48
Type: fix Use different mss for v4 and v6 packets. Change-Id: Ifcd322c1fd74f749a42bae671dd6cfed8c32b150 Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-08-30vcl: initialize ctrl_mq in workersFlorin Coras2-1/+5
Type: fix Change-Id: I1b9c8b0f9292f039b941e18d8aca5d734d5f1e77 Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-08-30vcl: allow non-blocking connectsFlorin Coras4-17/+38
Type: feature Change-Id: I55349f482ce6781337f747b2f0d2c0a027c3a675 Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-08-30tcp: track zero rwnd errorsFlorin Coras2-1/+9
Type: feature Distinguish between rcv window errors and errors after we advertised a zero rcv window, i.e., potential window probes. Change-Id: I6cb453c7aaae456c0a05a8328cfaa55eaca10bf7 Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-08-30session : make sure session layer is enabled when cli operate the sessions.Guanghua Zhang1-0/+4
Type: fix show session rules tcp vpp/src/vnet/session/application_namespace.c:34 (app_namespace_get) assertion `! pool_is_free (app_namespace_pool, _e)' fails Thread 1 "vpp_main" received signal SIGABRT, Aborted. Signed-off-by: Guanghua Zhang <ghzhang@fiberhome.com> Change-Id: I3430339a598a92d0a38826471adeb4547b0b7df4
2019-08-29stats: null-terminate default socket nameBenoît Ganne1-2/+2
Type: fix Fixes: d991a798ff Change-Id: I1920a40d7bbb01593676d9d8564158fdba9452bb Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-08-29lacp: continuing input packet trace from device driverSteven Luong1-5/+2
lacp gets the packet from the device driver. Let's continue the input packet trace's trajectory instead of restarting it in lacp-input. Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: I4d4537e050742a23f74287086d38d39673ebd60f
2019-08-29ip: remove unused function parameterSimon Zhang9-24/+15
Type: refactor Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com> Change-Id: I8674ff5f6f6336b256b7df8187afbb36ddef71fb
2019-08-29lb: fix memcpy error issueYulong Pei1-7/+3
vl_api_prefix_t size is 21 byte, ip46_address_t size is 16 byte, only copy 16 byte of vl_api_prefix_t to ip46_address_t is not correct. Type:fix Change-Id: I35ede7836a0c878d39388b29b15d91bb08f87a07 Signed-off-by: Yulong Pei <yulong.pei@intel.com>
2019-08-29svm: fix fifo hdr freelist allocationFlorin Coras3-1/+7
Type: fix Change-Id: Ia362ad821db1fd506e973e1844cc3ec74703cc17 Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-08-28bier: API cleanupJakub Grajciar1-7/+7
Use consistent API types. Type: fix Change-Id: I416171c729193e64a68e85a3f1f25d03a9a559d1 Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2019-08-28hsa: clean up vpp_echo json outputDave Wallace1-11/+13
Type: style Change-Id: I8dbf2197b78690b94a346d6ff564648ab42f8235 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2019-08-28quic: enable stable quic testsDave Wallace1-5/+0
Type: test Signed-off-by: Dave Wallace <dwallacelf@gmail.com> Change-Id: I041c011ee955acba656b774049b530efe1d50f22
2019-08-28lacp: mark is_mp_safe for show and dump binary APISteven Luong2-0/+5
show and dump binary APIs for lacp neighbors are running in the same thread as the create and delete interface. There is no need for barrier lock. Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: Id584bd7408210fcc23b464ef2084f11f88bca58b
2019-08-28acl: perform a sanity check of ACL rules before creating ACLAndrew Yourtchenko1-0/+81
Adding acl with incorrect arguments like 1.1.1.1/24 (instead of 1.1.1.0/24) don't cause a disaster, but doesn't match either, as some might expect. Add an explicit sanity check which returns an error. Type: fix Change-Id: Id1601f4b9c9887d3e7e70aac419d1f1de0c0e012 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2019-08-28session: fix unbind coverity warningFlorin Coras1-0/+7
Type:fix Change-Id: If4fce6bd9b06ed545d72df847afd6a74cdefe042 Signed-off-by: Florin Coras <fcoras@cisco.com>