Age | Commit message (Collapse) | Author | Files | Lines |
|
- Cleanup session state after last ack and avoid using a cleanup timer.
- Change session cleanup to free the session as opposed to waiting for
delete notify.
- When in close-wait, postpone sending the fin on close until all
outstanding data has been sent.
- Don't flush rx fifo unless in closed state
Change-Id: Ic2a4f0d5568b65c83f4b55b6c469a7b24b947f39
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Since the main thread is not used for session polling anymore, when vpp
is started with multiple wokers, allocate connections on the first. Also
add a simple udp make test.
Change-Id: Id869f5d89e0fced51048f0384fa86a5022258b7c
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
This patch separates setting of hardware interfaec and software
interface MTU. Software MTU is L2 payload MTU (i.e. not including L2
header). Per-protocol MTU for IPv4, IPv6 and MPLS can also be set.
Currently only IP4, IP6 are enabled in adjacency / rewrite code.
Documentation in src/vnet/MTU.md
Change-Id: Iee2fd6f0bbc8210748dd8e073ab9fab87d323690
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: Idd65c6d0489bf83984a2c34d22d3f94000fc7018
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
|
|
some IGMP hashse use only a u32 key, which is not stored in the object, so don't use memory based hash
Change-Id: Iaa4eddf568ea0164bc2a812da4cc502f1811b93c
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
- CLI history forward-search is bound to ^S which is common, but
that is also the tty's default control byte to pause output.
So we disable XON/XOFF in the tty so that we can use ^S.
Change-Id: I61717c77a11733d64eed7f8119677e7cd2e20029
Signed-off-by: Chris Luke <chrisy@flirble.org>
|
|
- Terminals do not reverse-line-wrap when the cursor is at the left
edge and \b tries to make it go left.
- Instead, we have to track the cursor position if we need to emit \b's
and if we are at the left edge emit an ANSI sequence to relocate
the cursor. Previously we usually simply calculated the new cursor
position after a bunch of output had completed.
- Further trickiness is required since most xterm-like terminals also
defer moving the cursor to the next line when at the right edge[1], and
then if they receive a \b move the cursor back one character too many.
- This requires intricate reworking of everywhere that \b is emitted
by the CLI code during command line editing.
[1] Bash counters this issue by tracking the cursor position as output
is generated and forcing the cursor to the next line (by emitting
a space followed by \r) if it gets to this phantom cursor position);
here we effectively do that but only if the user tries to go left
when in this state.
Change-Id: I7c1d7c0e24c53111a5810cebb504ccfdac743086
Signed-off-by: Chris Luke <chrisy@flirble.org>
|
|
Change-Id: I3f36e5760fd2935cc29d22601d4c0a1d2a22ba84
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
- The last line in the pager buffer was sometimes missed when
using space/pg-dn; simple off-by-one error.
Change-Id: Id4e5f7cf0e5db4f719f87b9069d75427bc66d3f7
Signed-off-by: Chris Luke <chrisy@flirble.org>
|
|
It should be OK to scrape dispatch stats without forcing a barrier
sync. Scrape the stats manually. We'll see what happens.
Change-Id: Ia20b51ea12ed81cce76e1801401bad0edd0645bb
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I332bb4578d1a3c79770985bf1f315d2ed823a3e5
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ib8e332174d96bf9cfa4bbaaa5b8d8bc9958424b1
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I85cfab692ae0a72277ae561cdba7dcbc1f60aca3
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I3e07070eed4948e813ad1490963c7f8ef7f4262e
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I2356b1e05fd868b46b4d26ade760900a5739ca4d
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: Iaeb52d94cb6da63ee93af7c1cf2dade6046cba1d
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I72a1ccdfdd5573335ef78fc01d5268934c73bd31
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Change-Id: I7add46258fe44bc4d23d805ffc7eae75e37cab82
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
also export per-node error counters
directory entries implement object types
Change-Id: I8ce8e0a754e1be9de895c44ed9be6533b4ecef0f
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
only learn from a GARP packet if it is an update to an existing entry.
Change-Id: I4c1b59cfedb911466e5e4c9756cf53a6676e1909
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: Ib756c4f3e8caba1f77ef48b62a2a5d7283fe5016
Signed-off-by: Vijayabhaskar Katamreddy <vkatamre@cisco.com>
|
|
Change-Id: Iea2c661cb3e0728bb2d10b06791ed84fed00f6a7
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
|
|
Change-Id: I77264c4398e6fad461bb4dc10867a1f9c3accec0
Signed-off-by: John Lo <loj@cisco.com>
|
|
... introduced with dpdk 18.05 support patch
Change-Id: Idf2283888f81d7652599651c0d65476e451f9343
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
This reverts commit d018870d1b02109fc8b328446f15312fdd2fcd11.
Change-Id: I700ade7a25ae5ed72cfed586e50b02492a4f11de
Signed-off-by: John Lo <loj@cisco.com>
|
|
Added code to initialize failsafe PMD
This is part of initial effort to enable vpp running over
dpdk on failsafe PMD in Microsoft Azure(4/4).
Change-Id: Ia2469c7087ca4b5c7881dfb11ec5c4fcebaa1d04
Signed-off-by: Rui Cai <rucai@microsoft.com>
|
|
- use types on the DHCP API so that the same data is sent in comfing messages and in dumps
- add the DHCP client dump API
- update VOM to refelct API changes
- rename VOM class dhcp_config* dhcp_client*
- the VOM dhcp_client class maintains the lease data (which it reads on a dump) for clients to read
Change-Id: I2a43463937cbd80c01d45798e74b21288d8b8ead
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: I205932bc727c990011bbbe1dc6c0cf5349d19806
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I86019f4ff9b0c8c633638fa23341d8ce49099ba6
Signed-off-by: John Lo <loj@cisco.com>
|
|
Logging previously used a string name for the log level and changed
the system-wide log level based on this string name. It now uses a
logging-module provided constant for the log level and changes its own
logger's level based on the name, and only if the level is provided.
This allows the logging to be more compatible with Pythonic usage,
where an external source may be used to dictate logging levels across
the system on a per module basis and should not be overridden.
Change-Id: Icf6896ff61a29b12c11d04374767322cdb330323
Signed-off-by: Ian Wells <iawells@cisco.com>
|
|
- Modify the API send_ip6_na and send_ip4_garp to take sw_if_index instead
of vnet_hw_interface_t and add call to build_ethernet_rewrite to support
subinterface/vlan
- Add code to bonding driver to send an event to bond_process when the first
interface becomes active or when the active interface is down
- Create a bond_process to walk the interface and the corresponding
subinterfaces to send garp/ip6_na when an event is received.
- Minor cleanup in bonding/node.c
Note: dpdk bonding driver does not send garp/ip6_na for subinterfaces. There is
no attempt to fix it here. But the infra is now done and should be easy to
add the support.
Change-Id: If3ecc4cd0fb3051330f7fa11ca0dab3e18557ce1
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: I3ac348a8cb1a515dfe1839eaa084c87719d282e1
Signed-off-by: Andrey "Zed" Zaikin <zed.0xff@gmail.com>
|
|
if you plan to put a hash into shared memory, the key sum and key
equal functions MUST be set to constants such as KEY_FUNC_STRING,
KEY_FUNC_MEM, etc. -lvppinfra is PIC, which means that the process
which set up the hash won't have the same idea where the key sum and
key compare functions live in other processes.
Change-Id: Ib3b5963a0d2fb467b91e1f16274df66ac74009e9
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Dave Barach <dave@barachs.net>
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: I9e759037295fe675abe426e565a562b1ec1e7d33
Signed-off-by: Jerome Tollet <jtollet@cisco.com>
|
|
DBGvpp# sh bier disp entry
DBGvpp# sh bier disp entry 0
No such BIER disp entry: 0
DBGvpp# sh bier disp table
DBGvpp# sh bier disp table 0
No such BIER disp table: 0
DBGvpp# sh bier disp table 11
No such BIER disp table: 11
DBGvpp#
DBGvpp# sh bier bift
no BIFT entries
DBGvpp# sh bier bift set 0
no BIFT entries
DBGvpp# sh bier bift set 0 sd 0 bsl 0
no BIFT entries
DBGvpp#
DBGvpp# sh bier fib
No BIER tables
DBGvpp# sh bier fib 0
DBGvpp# sh bier fib 0 4
DBGvpp# sh bier fmask
DBGvpp# sh bier fmask 2
No BIER f-mask 2
DBGvpp# sh bier imp
DBGvpp# sh bier imp 0
No such BIER imposition: 0
Change-Id: Ibadac3441dd8a6d1b96bd9ee4358e28498875b95
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Added configure argument "--with-log2-cache-line-bytes=5|6|7|auto"
AKA 32, 64, or 128 bytes, or use the inferred value from the build host.
produces build-xxx/vpp/vppinfra/config.h, which .../src/vppinfra/cache.h
Kernels which implement the following pseudo-file (aka x86_64) are
easy: /sys/devices/system/cpu/cpu0/cache/index0/coherency_line_size
Otherwise, extract the cpuid from /proc/cpuinfo and map it to the
cache line size.
Change-Id: I7ff861e042faf82c3901fa1db98864fbdea95b74
Signed-off-by: Dave Barach <dave@barachs.net>
Signed-off-by: Nitin Saxena <nitin.saxena@cavium.com>
|
|
"sh run" says the number of clocks for my tcp based throughput test
dropped from ~43 to ~23
Change-Id: I719439ba7fc079ad36be1432c5d7cf74e3b70d73
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ib092da61ba037ea30c6f38ea692ef9f1ca0cd8e7
Signed-off-by: Milan Lenco <milan.lenco@pantheon.tech>
|
|
Change-Id: Ia8ef019742c13b1149916d51796cad6f50687162
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ide1f76e9207b6022d5258a119f8d59cca85651b5
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Avoids recomputing the fib index in ip local for locally delivered
packets and should incur no extra cost when forwarding packets.
Change-Id: Id826ffa8206392087327f154337eabc8a801b4d7
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I9710e9ed6ceff6c0b2de0bcf77f355762df88b58
Signed-off-by: Jerome Tollet <jtollet@cisco.com>
|
|
Change-Id: I5bcbae276f8ac23718c5afc859da222508d07ad7
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
~5 clocks/packet improvement...
Change-Id: I1a78fa24dcd1b3ab7f45e10b9ded50f79517114a
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
This is ~50% improvement in buffer alloc performance.
For a 256 buffer allocation, it was ~10 clocks/buffer, now is < 5 clocks.
Change-Id: I97590e240a79a42bcab5eb26587fc2d11e6eb163
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Id97de732b5952d5d86202e7749c9e81cf8dbed87
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: Ib121b24935d5c706cfba6e4b6d321086a38cad91
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
- implement a 1us purgatory for the session structures
by adding a special connection list, where all connections
about to be deleted go.
- add per-list-head timeouts updated upon the list enqueue/dequeue
for connection idle management
- add a "unused" session list with list ID#0, which should
never be used unless there is a logic error. Use this ID
to initialize the sessions.
- improve the maintainability of the session linked list
structures by using symbolic bogus index name instead of ~0
- change the ordering of session creations - first reverse, then
local. To minimize the potential for two workers competing for
the same session in the corner case of the two packets
on different workers creating the same logical session
- reduce the maximum session count to keep the memory usage the same
- add extra log/debug/trace to session cleaning logic
- be more aggressive with cleaning up sessions - wind up the
interrupts from the workers to themselves if there is more
work to do
Change-Id: I3aa1c91a925a08e83793467cb15bda178c21e426
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
If the caller is the session owning thread or the main thread with a
worker barrier sync (cli/api) add an event to the pending disconnects
vector in the session node and entirely avoid using the event queue.
Useful for bursts of disconnects (like an app detach).
If disconnects come from a processes, be willing to retry enqueueing the
disconnect to the event queue multiple times.
Change-Id: Ieece1f1091b713f94c41c703b6e805bc8498816a
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Improve deletion of L2FIB MAC entry using l2fib_add_del API. If
sw_if_index param specified in th API is non-zero, check that its
value match that of the MAC entry to proceed with deletion.
Improve "show l2fib" CLI to allow display of all entries, learned
entries only, or added ovia CLI/API entries only. For added entry,
show "no" under the age column to indicate entry does not age.
Change-Id: I0bd2582c2b6bac268e551e4f8ca6dab2be4400ad
Signed-off-by: John Lo <loj@cisco.com>
|