Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: feature
This patch begins enabling support for building VPP as a package for a
Yocto-based embedded Linux distribution. Yocto QA complains about
executables and libraries with an rpath configured, as the paths may not
be valid on the target system. Therefore, this patch adds a new CMake
option named `VPP_SET_RPATH`, which is enabled by default but can be
disabled by a Yocto-based build.
Change-Id: I90e9c4ba07138032b0f76cb72a98e58470885d55
Signed-off-by: Nathan Moos <nmoos@cisco.com>
|
|
This change introduces flow concept to endpoint-dependent NAT. Instead
of having a session and a plethora of special cases in code for e.g.
hairpinning, twice-nat and others, figure all this out and store it in
flow logic. Every flow has a match and a rewrite part. This unifies all
the NAT packet processing cases into one - match a flow and rewrite the
packet based on that flow. It also provides a cure for hairpinning
dilemma where one part of the flow is on one worker and another on
a different one. These cases are also sped up by not requiring
destination adress lookup every single time to be able to rewrite source
nat as this is now part of flow rewrite logic.
Type: improvement
Change-Id: Ib60c992e16792ea4d4129bc10202ebb99a73b5be
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: feature
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I89dc3815eabfee135cd5b3c910dea5e2e2ef1333
|
|
Type: fix
Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com>
Change-Id: Idd14dc11e92e0851c64f83e280b52f12e32ae48d
|
|
Don't assume that half-open connections pending removal are always
successful.
Type: fix
Signed-off-by: Ivan Shvedunov <ivan4th@gmail.com>
Change-Id: I955077a4ed2389b9ee38d97e27a7c7761c860a4a
|
|
vlib_validate_combined_counter_will_expand() was calling
_vec_resize_will_expand() with wrong arguments, which resulted in false
return value. Apart from the initial call, it never indicated a vector
resize.
The callers relying on this function did not perform a barrier sync
because of the wrong prediction even if the vector got extended by
a subsequent vlib_validate_combined_counter() call.
The fix introduces a new, simplified macro that is easier to call.
vec_resize_will_expand() accepts the same arguments as vec_resize().
Type: fix
Signed-off-by: Miklos Tirpak <miklos.tirpak@gmail.com>
Change-Id: Ib2c2c8afd3e665e0e3d6ae62ff5cfa287acf670f
|
|
Type: docs
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I3dfde4520a48c945ca9707accabbe1735c1a8799
|
|
Type: fix
If a tunnel's source is not local then post encap VPP will attempt to
receive (via ip4-local) that packet, things go wrong from there.
The fix is when stacking the encap forwarding don't accept a receive
DPO. This approach is taken, rather than rejecting bad tunnels, because
the 'local-ness' of the tunnel's source can change and we can't reject
tunnels that were once correctly configured but are no longer.
the user will quickly discover their mistake as traffic won't pass.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I46198422e321606e8baba003112e978a526b4c2f
|
|
Remove assert condition ensuring that a packet was punted with reason
spi=0. We can't rely on data in punt_reason because it is defind in an
union. This patch adds a new IKE node that handles punted IKE packets
separately.
Type: fix
Change-Id: I2e1b44922e53e049bd8512fa5cb85cee6a2b8aa7
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Fix build errors related to chachapoly when the
system openssl version is < 0x10100000.
Type: fix
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Change-Id: I62283fcc44c952ddd4d6a9f621c18e8be1af8af1
|
|
Minor fixes for Intel AVX-512 alignment, and cache update.
Type: fix
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Change-Id: I9f9bebb4ecb3265ffc765affd1ed94d0ba979066
|
|
Type: fix
Signed-off-by: wanghanlin <wanghanlin@corp.netease.com>
Change-Id: I6698749163b0ed38093d8439e94b18b6841dc6ce
|
|
now startup.conf supports confuguration for VMBUS
devices as for PCI devices for whitelisting/blacklisting
dpdk { dev fa5a6e7a-cf3a-4b98-9569-addb479b84bc }
with sub-configuration as for PCI devices
dpdk { blacklist fa5a6e7a-cf3a-4b98-9569-addb479b84bc }
where fa5a6e7a-cf3a-4b98-9569-addb479b84bc - example of UUID
struct vlib_vmbus_addr_t changed to union with UUID described
fields
Added device_config_index_by_vmbus_addr
blacklist_by_vmbus_addr
to enumerate available device configs
hash_key is as_u32[0] field(last 4 bytes of UUID)
Lost of precision against full UUID, but 2^32 is enough
to handle all the devices available
Added is_blacklisted check while creating vnet devices in
order to supress creation of dev if it's blacklisted
Type: feature
Signed-off-by: Vladimir Ratnikov <vratnikov@netgate.com>
Change-Id: Id82611e54fed082190e488c7e5fbe14ecbe5b2ab
|
|
Worker thread A send rpc to worker thread B with vls_table_lock when
worker thread B try to lock vls_table_lock, so unlock it temporarily.
Add worker_rpc_lock to synchronize rpc message among workers to prevent
waiting for each other deadly.
Add timeout for rpc response to prevent hanging when VPP exit/crash.
Type: fix
Signed-off-by: wanghanlin <wanghanlin@corp.netease.com>
Change-Id: I675f1fe76673ede09107f6eeaaa0eda8bbfc6e61
|
|
tag is expected to be a null-terminated C-string
Type: fix
Change-Id: I633719068c37eac395cc30a6a314c00848e9cdca
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Patch n. 2 aimed at moving EI features out of
NAT44 plugin & split of EI/ED functions.
Type: refactor
Change-Id: Ida20c1c084449b146344b6c3d8442f49efb6f3fa
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Allocate and attach a new pair of private fifos in the right private
slice when a session is cloned. This ensures that private fifos are not
shared between workers.
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ib700d18104d2ca79aa8a07434cdcdcab0bef13a5
|
|
want_l2_macs_events
Type: feature
Signed-off-by: Jerome Tollet <jtollet@cisco.com>
Change-Id: I6de6dae7da4ec1001e2811975a9b67acfc1a148c
|
|
- Refactor make test code to be co-located with
the vpp feature source code.
Type: test
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I056717261553f6449f5fcd3611b6ae3895a00ba6
|
|
VPP only supports a poor man's approach for interrupt notification to the
driver. It uses a simple binary flag for "interrupt needed" or "interrupt
not needed". Most drivers support more sophisticated event index already.
This feature is to add the long due missing feature and make it configurable,
off by default.
Type: feature
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I68dab7dd07045cafb49af97b7f70db9b8131ae03
|
|
In responder mode we need to remember interface index from which IKE
session was initiated. Otherwise when sending keep alive packets to the
initiator, the default ip table is always used for lookup instead of the
one associated with the interface.
Type: fix
Change-Id: Iade3fc3a490b7ae83c3f6e9014d1f4204e476ac1
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Remove the deprecated tls apis.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ia1e12bd813671146f0aca22e83d04c23ac13e595
|
|
Type: feature
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Ief1755131297afcaa14fe74fd8dd28c71a92fbe6
|
|
Type: fix
it's been 2 releases since it was marked deprecated.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I0eba7ed607826ed0d00e7d2d8f9b27d09e8e9a6e
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Id94cf2aeae8167868d5f96534224759c1ef6f837
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I6a2cc596cf0b7f29d3ae1c05b1bb6b748b558175
|
|
Found by coverity. Fix potential memory leakage in generated code.
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: If492541b8b66e574f30ecdd0dd533099cbe068ad
|
|
- tag is expected to be 64-bytes
- when specifying tag on cli, a vector is allocated. Make sure it is
freed
Type: fix
Change-Id: Id1741fe406819ca9f71edb081d4483f52cae547d
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
I should have done this wehn i marked the request as deprecated. The
reply also needs to be marked deprecated so the API compliance script
can remove it along with the request.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I8391257944b6cff7b32a01a479dd1dcab30cd33b
|
|
Type: feature
Signed-off-by: Jerome Tollet <jtollet@cisco.com>
Change-Id: I57ed6699050445d9c9aec98eff3aab56735aca54
Signed-off-by: Jerome Tollet <jtollet@cisco.com>
|
|
Type: fix
Fixes: 587f9130424fd451e4ba823240d02f655fb197d1
Change-Id: Ia1739fad6a36fa658aece157d7adea8bbaa751d2
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
This patch is aimed at moving EI features out of NAT44
plugin & split of EI/ED functions.
Type: refactor
Change-Id: I63cf70a264ed2512708fe92665d64f04690783d0
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Type: fix
Change-Id: I84388bd8b68e8c48a4f44d7ecf7aadec2408b717
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: fix
Signed-off-by: yedonggang <yedg@wangsu.com>
Change-Id: Icc3681b591e6deb93c3ff1fda5f9471fa3c96cc6
|
|
With this there are no more pointers in data structures allocated on
fifo segments.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ibe584b7b6809fa360a105974655a91674db69ab6
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I7b2fd896dfa6df46916f46327975b95561809f00
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I1658a9c19d8eae4c9a42c0a111d4ad343b8eb8a4
|
|
Type: feature
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ic373cd2c11272da539eb4b0db27227f36f2f9688
|
|
Type: refactor
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I63a44e11322f6fe27255820524e022f6d710b083
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I7672d0715348d30c0aa718e21ed86c96402c6d69
|
|
Add descriptions to clib_file_t template structures so that
sockets can be identified via the 'show unix file' cli command.
Type: fix
Change-Id: Ibf82d55aa6c7b1126bd252b76d0dc8b7076f5046
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: fix
shallow was the default, but probably by accident as it depended on
module load order.
full assembly is the v4 behaviour.
using proper types allows gdb to print enum names.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: If157c5b83614c7adbd7a15a8227a68f8caf4e92c
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I113a630d6db4741f54e508f7e0ed77be139df0e4
|
|
Current vhost multi-queues support has a hard limit of 8 queue pairs
due to static vring array. This limit was raised in qemu. VPP should
support more than 8 queue pairs also.
Change static vring allocation to dynamic. When the interface is
created, we allocate 8 queue pairs to begin with. We also keep track
of how many queue pairs that the interface actually uses.
We reply VHOST_USER_GET_QUEUE_NUM with 128 as our maximum number of
support queue pair. When qemu starts initializing queue pair greater
than 8, we expand the vrings as needed on demand.
Type: improvement
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I4a02d987d52d1bbe601b00e71f650fe6ebfcc0d7
|
|
This fixes build for VPP_EXTERNAL_PROJECT plugin with missing
PLUGIN_API_FILES.
Type: fix
Signed-off-by: Ruslan Babayev <ruslan@babayev.com>
Change-Id: I687bedcd828d834b0a7de1363f0b2d063f75ee17
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Id8e77e8b2623be719fd43a95e181eaa5b7df2b6e
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I6a982f4aa3c1816160ff1c0a663ec6df6ec4cf0a
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Icd44ede9604c29839af250a2be93ecf467467aa0
|
|
- Refactor make test code to be co-located with
the vpp feature source code
Type: test
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I17003925be06d1051f18f1c24ff081790a610c23
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Idcc8d862b98dba4a67f829c1778377f35ad47b00
|