Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: fix
Fixes: 599a16b
Change-Id: I954e037ab944028798f9aa2a93f45322c8c7b4bb
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Signed-off-by: Stanislav Zaikin <stanislav.zaikin@46labs.com>
Change-Id: I16b48460b3fcd82bbb89c375402cb2455414d8bb
|
|
Type: improvement
Change-Id: Ie6987736faf7d8a641762e276775da8ee0c03ea4
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Change-Id: I9b9bb37a0895366b412f042b0e2da5bbdd477325
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Do not add ip header as that's added by tcp output and fix checksum.
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I9439acf5c66184af0350b1d4d7406b3feb2e79a1
|
|
Type: feature
Change-Id: I9ae0dbf28b4571a37c568b587b771f90c06f200d
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: feature
Change-Id: I20c56e0d3103624407f18365c2bc1273dea5c199
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I4001f39afde8c33b60c15f74034bcce013fbbf70
|
|
As long as ack and segment are legitimate accept ooo data as we
transition to established.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I85cdc65d70cb8ae689a9ce9bbe4f86228b1ac533
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I231b319d4d7aa3e17cc8cfe8aaa4762995a5b2c4
|
|
Type: test
Change-Id: Ib320cfb5e20f12614c013a92ac15490f8ca3a7ce
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
This fix differentiates UDP and UDP-encapsulated ESP packets processing.
While UDP-encapsulated ESP traffic is processed as IPsec traffic, UDP as
other plain-text protocols is NOT dispatched against SPD policies.
Key logic is taken from RFC 3948, and is based on the fact
that the checksum of UDP packet encapsulating ESP packet must be zero.
Type: fix
Signed-off-by: vinay tripathi <vinayx.tripathi@intel.com>
Change-Id: Ib1b4d240eea8e89f2daf17ec833905f26cdb31bd
|
|
ipsec_esp_packet_process
This inline function is introduced to simplify code readability and allows to splitting of
UDP and ESP processing in the next step.
Type: improvement
Change-Id: Ida4d6abbed141ac74d4d285900777778eb8a5a1d
Signed-off-by: Vinay Tripathi <vinayx.tripathi@intel.com>
|
|
Type: test
Change-Id: Ib809f5a6c9e2f08d87f0070231df04d5f0040ca0
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Change-Id: Ia8b5421cbaaf861ddb3ad7aeca53a077ff18864e
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
Type: fix
|
|
Type: improvement
Since RFC4303 does not specify the anti-replay window size, VPP should
support multiple window size. It is done through a clib_bitmap.
Signed-off-by: Maxime Peim <mpeim@cisco.com>
Change-Id: I3dfe30efd20018e345418bef298ec7cec19b1cfc
|
|
Currently, TCP flags of a flow entry don't get reset once the flow is
exported (unlike other meta information about a flow - packet delta
count and octet delta count). So TCP flags are accumulated as long as
the flow is active. When the flow expires, it is exported the last time,
and its pool entry is freed for further reuse. The next flow that gets
this pool entry will already have non-zero TCP flags. If it's a TCP
flow, the flags will keep being accumulated. This might look fine when
exported. If it's a non-TCP flow, that will definitely look erroneous.
With this fix, reset TCP flags once the flow is exported. Also, cover
the reuse case with tests.
Type: fix
Change-Id: I5f8560afffcfe107909117d3d063e8a69793437e
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
|
|
Type: fix
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Icdff3528fcaf863b400b9aca6c30d284bc17d5f0
|
|
Type: test
Change-Id: Iba94edb7eb439ddc994d9a16cb52108373d052ce
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: improvement
Change-Id: I2427e1a93e89e9a7ac884b84352b96cf523ae11e
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: test
Change-Id: I8665492c2f7755901a428aacdb27e98329ff557a
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Setting and using the SOURCE_DATE_EPOCH variable takes
care of most of the magic necessary.
https://reproducible-builds.org/docs/source-date-epoch/
vpp-ext-deps packages after this change is being built with that
date set to date of the last modification of the
subtree (similar logic to deriving the "number" for
the package version)
For the rest of the packages, pinning the following
three variables should result in bit-identical
artifacts across multiple runs:
export SOURCE_DATE_EPOCH=$(date +%s)
export VPP_BUILD_HOST="buildhost"
export VPP_BUILD_USER="builduser"
Add a blurb in the docs describing this new functionality.
Type: improvement
Change-Id: I71b085f0577b2358aa98f01dafd8e392239420a6
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Type: fix
Change-Id: I9373dabcdb2c4ba987e732b59e63b52603010873
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Fixes: 8973b07
Change-Id: Iba6e29bab35be0148b469965c3af8391b5ab9140
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Fixes: unknown
Change-Id: I81ee03aaea2e1e6ffb9d6ee91db7fb9acd6debb7
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
If an interface address is added, the glean adjacency for it's covering
prefix is updated with that address. In the case of multiple addresses
within the same prefix being added, the most recently added one will end
up being used as the sender protocol address for ARP requests.
Similar behavior occurs when an interface address is deleted. The glean
adjacency is updated to some appropriate entry under it's covering
prefix. If there were multiple interface addresses configured, we may
update the address on the adjacency even though the address currently in
use is not the one being deleted.
Add a new value PROVIDES_GLEAN to fib_entry_src_flag_t. The flag
identifies whether a source interface entry is being used as the address
for the glean adjacency for the covering prefix.
Update logic so that the glean is only updated on adding an interface
address if there is not already a sibling entry in use which has the
flag set. Also, only update the glean on deleting an interface address
if the address being deleted has the flag set.
Also update unit test which validates expected behavior in the case
where multiple addresses within a prefix are configured on an interface.
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
Change-Id: I7d918b8dd703735b20ec76e0a60af6d7e571b766
|
|
Check if crypto ops vector is matching actual ops instead if blindly
dereferencing it.
Type: fix
Signed-off-by: Dmitry Valter <d-valter@yandex-team.com>
Change-Id: Ib88ab44137d9360ee96228e72349a62b2fa7a7e0
|
|
Currently, when L2 and L4 recording is enabled on the L2 datapath, the
L2 template will contain L4 fields and L2 flows will be exported with
those fields always set to zero.
With this fix, when L4 recording is enabled, add L4 fields to templates
other than the L2 template (i.e. to the IP4, IP6, L2_IP4, and L2_IP6
templates). And export L2 flows without L4 fields. Also, cover that case
in the tests.
Type: fix
Change-Id: Id5ed8b99af5634fb9d5c6e695203344782fdac01
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
|
|
memif_disconect may be called without barrier sync. It removes stuff in mq
without protection which may cause troubles for memif RX/TX worker threads.
The fix is to protect mq removal in memif_disconnect.
Type: fix
Change-Id: I368c466d1f13df98980dfa87e8442fbcd822a428
Signed-off-by: Steven Luong <sluong@cisco.com>
|
|
Type: improvement
Change-Id: Ie86a5edf2ada21355543e9a0382052b16ff86927
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ie01d7e8d6eddf3ba88f2cd6eb8369c8ec8179cb4
|
|
Also make sure connection is properly cleaned up.
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I02f83e9a1e17cbbbd2ee74044d02049b2fd2f21c
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: If74e04498423bed42593e79ec92482421cfda8d2
|
|
Using the source address selection algorithm to determine the best source
of an NS for address resolution risks incompatible behavior.
It may choose a source address that is off-link to the other host.
Which may drop it.
A safer approach is to always use the link-local address as the SA.
It's recommended to pick a source that an application will later use,
as VPP is mostly a router, that rarely applies. And regardlessly we have
no mechanism to signal from an application that triggered address resolutiuon
what source address it intends to use.
Type: fix
Change-Id: I3c5de66e41505f3682767706ef1195a20e4f0e54
Signed-off-by: Ole Troan <otroan@employees.org>
|
|
When IPFIX flow record generation is enabled on an interface and the
active timer is set, flows will be saved and then exported according to
the active and passive timers. If then disable the feature on the
interface, the flow entries currently saved will remain in the state
tables. They will gradually expire and be exported. The problem is that
the template for them has already been removed. And they will be sent
with zero template ID which will make them unreadable.
A similar problem will occur if feature settings are "changed" on the
interface - i.e. disable the feature and re-enable it with different
settings (e.g. set a different datapath). The remaining flows that
correspond to the previous feature settings will be eventually sent
either with zero template ID or with template ID that corresponds to the
current feature settings on the interface (and look like garbage data).
With this fix, flush the current buffers before template removal and
clear the remaining flows of the interface during feature disabling.
Type: fix
Change-Id: I1e57db06adfdd3a02fed1a6a89b5418f85a35e16
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
|
|
This prevents ipfix flood with the repeating events and allows
to enable nat64 max_session and max_bibs events. Also fix wrong
endian for det44 and nat64 ipfix tests, now should be fine with
extended tests enabled.
Max session per user event @ nat44-ei requires more precise rate
limiter per user address, probably with sparse vec, not handled.
Type: improvement
Signed-off-by: Vladislav Grishenko <themiron@yandex-team.ru>
Change-Id: Ib20cc1ee3f81e7acc88a415fe83b4e2deae2a836
|
|
Support rewriting the inner packet for ICMP6 error messages.
Type: feature
Change-Id: I7e11f53626037075a23310f1cb7e673b0cb52843
Signed-off-by: Ole Troan <otroan@employees.org>
|
|
Flushing the neighbor cache was only available through API.
Add CLI command. Either flushes whole table (IP4,IP6)
or all neighbors on specified interface.
Type: improvement
Change-Id: Ia8c68fb032a2dfd940a136edc2aee80db5c37685
Signed-off-by: Ole Troan <otroan@employees.org>
|
|
Type: improvement
Change-Id: If775b1d145e462346de562a3c893f302e8c7b814
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Now we create tun/tap and then check whether lcp_itf_pair was already
created. Move the check in the beginning.
Type: fix
Signed-off-by: Stanislav Zaikin <stanislav.zaikin@46labs.com>
Change-Id: I848685a9cfdbe92a5e38ecb8e5d5322262b4e384
|
|
When MAC address changes for an interface, address change callbacks are
executed for it. In turn adjacencies register a callback for MAC address
changes to be able to update their rewrite strings accordingly.
Subinterfaces inherit MAC address from the parent interface. When MAC
address of the parent interface changes, it also implies MAC address
change for its subinterfaces. The problem is that this is currently not
considered when address change callbacks are executed. After MAC address
change on the parent interface, packets sent from subinterfaces might
have wrong source MAC address as the result of stale adjacencies. For
example, ARP messages might be sent with the wrong (previous) MAC
address and address resolution will fail.
With this fix, when address change callbacks are executed for an
interface, they will be also executed for its subinterfaces. And
adjacencies will be able to update accordingly.
Type: fix
Change-Id: I87349698c10b9c3a31a28c0287e6dc711d9413a2
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
|
|
Change-Id: I5aff21b5ca32e7eb84b11cca8387e7ac42fbbe23
Type: improvement
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
When running unpriviledged sysfs allows reading only first
64 bytes of PCI config space.
Change-Id: I62d18328925a2e4936406c2842154b20182cacb9
Type: improvement
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Add show npt66 bindings.
Add RX/TX and translation error counters.
Type: improvement
Change-Id: I4513b111f815a15d5a7537ce503f0c084b523aa1
Signed-off-by: Ole Troan <otroan@employees.org>
|
|
Be less aggressive with rx events on connect/accept notification.
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ie93a08c7eef69383bf0301a163fd2131dd51372a
|
|
Currently, L2 flows are exported using L2_IP6 template if L3 or L4
recording is enabled on L2 datapath. That occurs because during feature
enable, L2 template is added and its ID is not saved immediately. Then
L2_IP4 and L2_IP6 templates are added overwriting "template_id" each
time. And in the end, the current value of "template_id" is saved for L2
template. The problem is that "template_id" at that point contains the
ID of L2_IP6 template.
With this fix, save the template ID immediately after adding a template
for all variants (datapaths). Also, cover the case with a test.
Type: fix
Change-Id: Id27288043b3b8f0e89e77f45ae9a01fa7439e20e
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
|
|
List BlueField NICs as a supported PCI devices.
Type: feature
Change-Id: Ida2300df516ab9cd2fcde1f816bbdc081016039a
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
|
|
s->tx_fifo is 0 for the connecting half open session.
Type: fix
Change-Id: I2ba1ae99a2fa4fae1896587f40e0e4fb73c1edcb
Signed-off-by: Steven Luong <sluong@cisco.com>
|
|
Type: fix
Change-Id: I35b3920288269073cdd35f79c938396128d169c9
Signed-off-by: Brian Morris <bmorris2@cisco.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Id56a101a6350903b00f7c96705fb86039e70e12c
|