Age | Commit message (Collapse) | Author | Files | Lines |
|
xd->flags is set incorrectly when a slave link is down in bonded interface mode.
This can result in VPP crash when data traffic flows to the interface.
Change-Id: Ideb9f5231db1211e8452c52fde646d681310c951
Signed-off-by: Steve Shin <jonshin@cisco.com>
|
|
Minor bug fixes
CID 183000: double close
CID 180996: dead code
CID 180995: NULL deref
CID 181957: NULL deref
CID 182676: NULL deref
CID 182675: NULL deref
Change-Id: Id35e391c95fafb8cd771984ee8a1a6e597056d37
Signed-off-by: Chris Luke <chrisy@flirble.org>
|
|
Use sw_if_index[VLIB_TX] if set as fib index when doing the urpf check.
Change-Id: I5ec3e7f7a54c6782704d91e9a5614fd0f7f9e3de
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
only one counter update per frame (was updated per iteration)
only access ethertype for casts (was always accessing ethertype)
Change-Id: I3a3c3219ec63e975cf5bd8cf2d93103932a4aaa3
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Change-Id: I373cc252df3621d44879b8eca70aed17d7752a2a
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Causes subtle misbehavior elsewhere
Change-Id: I3a0ade26e8e03b8c5dc8e722f6a01fb99ec7a1e0
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I5695d51dd4f6daff472877fe1cce3ddcb924b187
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
rename "enslave interface <slave> to <BondEthernetx>" to
"bond add <BondEthernetx> <slave>
"detach interface <slave>" to
"bond del <slave>"
Change-Id: I1bf8f017517b1f8a823127c7efedd3766e45cd5b
Signed-off-by: Steven <sluong@cisco.com>
|
|
Following TCP fixes from Florin (11430), this patch follows the same
approach to indicate a fib (not just using the default one).
Change-Id: Ib883aa0e9a1c6157acfea69c44426ba07d6c932a
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
Static mapping is not deleted from resolution vector after address is set on
interface.
Change-Id: Ib7c45ca2e307123d101248c5a1b17d130ac32cd0
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: I9a0105aa2373bd4db218851b1bbee50c6b6dfc7d
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
worker (VPP-1213)
Change-Id: I8e0c7ed2ff462b9ab59c233f56be262ec03c29ff
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: I33ba5a011100baf1c786f9a63a0cf3d2e1020493
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Change-Id: I59b4142daab439d60a1ebd48b2c1366df0160288
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
This address crash with gcc-7 observed when -o3 is used.
Change-Id: I10e87da8e5037ad480eba7fb0aaa9a657d3bf48d
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
- autosize the ACL plugin heap size based on the number of workers
- for manual heap size setting, use the proper types (uword),
and proper format/unformat functions (unformat_memory_size)
Change-Id: I7c46134e949862a0abc9087d7232402fc5a95ad8
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Change-Id: I4851b2245f81bcf3cf5f40909c4d158a51af7068
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
private header size allows to reserve firs X bytes of payload to be
considered as private metadata. For now we just support value 0
but adding this field to address future needs without changing protocol
version.
Change-Id: Id77336584c0194a303b20210aff584c7372cba01
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
coverity complains about statements in function A
function A
{
x % vec_len (y)
}
because vec_len (y) is a macro and may return 0 if the pointer y is null.
But coverity fails to realize the same statement vec_len (y) was already
invoked and checked in the caller of function A and punt if vec_len (y) is 0.
We can fix the coverity warning and shave off a few cpu cycles by caching
the result of vec_len (y) and pass it around to avoid calling vec_len (y)
again in multiple places.
Change-Id: I095166373abd3af3859646f860ee97c52f12fb50
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: I0245263b212142858d3305b0f365d8342912dbb9
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: If3827828062a46f1cce43642535333f677f06e62
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Changes the source of the l3 offset to a more
proper one, same as I5d9f41599ba8d8eb14ce2d9d523f82ea6e0fd10d.
Change-Id: I5ff05d7d89507ecb378a2bd62f5b149189ca9e99
Signed-off-by: Szymon Sliwa <szs@semihalf.com>
|
|
Change-Id: I007d48aeb934e5d2f087ca3b8ddc6f7a0e48d411
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ic83971d8d9d8d0bb90a35932e60761cd728457f3
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I47768ea50140222fec54e97cbaff2049bd3cb599
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: Ic07ea5b0a7addec7b0ccfbe0570f341056e6d55b
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
until it is needed
Registering ACL plugin user module within the "ACL as a service" infra during the plugin init
causes an unnecesary ACL heap allocation and prevents the changing of the ACL heap size
from the startup config.
Defer this registration until just before it is needed - i.e. when applying an ACL to
an interface.
Change-Id: Ied79967596b3b76d6630f136c998e59f8cdad962
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
How to use:
plugins
{
plugin default {disable}
plugin dpdk_plugin.so {enable}
plugin acl_plugin.so {enable}
}
It also preserves the old behavior.
Change-Id: I9901c56d82ec4410e69c917992b78052aa6a99e0
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: If168a9c54baaa516ecbe78de2141f11c17aa2f53
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Select the right segment manager for local sessions established via
global table.
Change-Id: I88ad4bf70d0cae160a0c744950098a954dfbc911
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
When a user session is allocated/reused, only increase
one of the session counters for that user if the counters
are below the per-user limit.
THis addresses a SEGV that arises after the following
sequence of events:
- an outside interface IP address is put in a pool
- a user exceeds the number of per-user translations by
an amount greater than the number of per-user translations
(nsessions + nstaticsessions > 100 + 100)
- the outside interface IP address is deleted and then added
again (observed when using DHCP client, likely happens if
address changed via CLI, API also)
- the user sends more packets that should be translated
When nsessions is > the per-user limit,
nat_session_alloc_or_recycle() reclaims the oldest existing
user session. When an outside address is deleted, the
corresponding user sessions are deleted. If the counters were
far above the per-user limit, the deletions wouldn't result
in the counters dropping back below the limit. So no session
could be reclaimed -> SEGV.
Change-Id: I940bafba0fd5385a563e2ce87534688eb9469f12
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
- allow to optionally specify the specific MACIP ACL index:
'show acl-plugin macip acl [index N]'
- after showing the MACIP ACL, show the sw_if_index of
interface(s) where it is applied.
Also, add some executions of this debug commands
to the MACIP test case for easy verification.
Change-Id: I56cf8272abc20b1b2581b60d528d27a70d186b18
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Add a few dhcp client rx packet/state counters
Temporarily disable the dhcp client unit test, since it trips over the
newly-added hardware address check.
Change-Id: I7f68607e6ed3d738cba357c3fe76664a99b71cd8
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
The init-path for IPSEC_AH where the CTX gets initialized is broken
since the for-loop never executes due to the wrong usage of
tm->n_vlib_mains which being subtracted by 1.
Change-Id: I4d967f52cd3ca061aa60d824d65f446e06162403
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
Change-Id: Idef3c665580c13d72e99f43d16b8b13cc6ab746f
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I4b428e170436671b329657283cf7653befc85c9f
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
The functions which get called by other plugins need to set the acl plugin heap,
such that the other plugins do not have to think about it.
Change-Id: I673073f17116ffe444c163bf3dff40821d0c2686
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Change-Id: I3e4bbfe205c86cb0839dd5c542f083dbe6bea881
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: Ic2eddc803f9ba8215e37388a686004830211cf6f
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
We were only puting one packet per frame to the output node. Change to
buffer multiple packets per frame. Performance is now on top of dpdk-based
bonding.
Put a spinlock in the tx thread in case the rug is pulled under us.
Change-Id: Ifda5af086a984a7301972cd6c8e428217f676a95
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: I57b2ec35d9629fb5336c1ccfa4c6c849df118f7b
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: Iacb32e6e855f7b77108154d956ef27ee141bbde0
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: Ide8bf41e24a427643a3a17b1c9089993790c12a6
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
This reverts commit 378ac0533e5ac8c3121d8f66ba61a8548e55282f.
Change-Id: If34b1c964453adb0e4c44e3eab4f6e306bd9c9e9
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
other plugins
This code implements the functionality required for other plugins wishing
to perform ACL lookups in the contexts of their choice, rather than only
in the context of the interface in/out.
The lookups are the stateless ACLs - there is no concept of "direction"
within the context, hence no concept of "connection" either.
The plugins need to include the
The file acl_lookup_context.md has more info.
Change-Id: I91ba97428cc92b24d1517e808dc2fd8e56ea2f8d
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Change-Id: Ia0f659b810f2c79b1a6c98ce566a86ce413c7448
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Do not translate packet which go out via nat44-in2out-output and was tranlated
in nat44-out2in before. On way back forward packet to nat44-in2out node.
Change-Id: I934d69856f0178c86ff879bc691c9e074b8485c8
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
In version 1 of the protocol sender was always ring producer and
receiver was consumer. In version 2 slave is always producer,
and in case of master-to-slave rings, slave is responsible for
populating ring with empty buffers.
As this is major change, we need to bump version number.
In addition, descriptor size is reduced to 16 bytes.
This change allows zero-copy-slave operation (to be privided in the separate
patch).
Change-Id: I02115d232f455ffc05c0bd247f7d03f47252cfaf
Signed-off-by: Damjan Marion <damarion@cisco.com>
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Change-Id: I31c6a0a1d11b5b12d8a5c32c29fea9618b1a53d4
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I6fdb9e7b718c696f7352541f90026cf60f11338f
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|