Age | Commit message (Collapse) | Author | Files | Lines |
|
This is because mlx5_pci is also compatible with another
series of NICs such as ConnectX-5 and ConnectX-6.
Type: fix
Change-Id: I10f0468bbe36ab61c72fb3dc0aa898f8e2f9e88c
Signed-off-by: Nobuhiro MIKI <nmiki@yahoo-corp.jp>
|
|
Apps may drain fifos prior to handling of accept notification, e.g.,
vcl session relying on epoll lt mode.
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I7d105d35a6bf33c419f4f137a5132e6a5d294fe7
|
|
Type: fix
In esp_encrypt_inline(), an index and pointer to the last processed SA
are stored. If the next packet uses the same SA, we defer on updating
counters until a different SA is encountered.
The pointer was being retrieved, then the SA was checked to see if the
packet should be dropped due to no crypto/integ algs, then the index was
updated. If the check failed, we would skip further processing and now
the pointer refers to a different SA than the index. When you have a
batch of packets that are encrypted using an SA followed by a packet
which is dropped for no algs and then more packets to be encrypted using
the original SA, the packets that arrive after the one that was dropped
end up being processed using a pointer that refers to the wrong SA data.
This can result in a segv.
Update the current_sa_index at the same time that the sa0 pointer is
updated.
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
Change-Id: I65f1511a37475b4f737f5e1b51749c0a30e88806
|
|
Type: improvement
Change-Id: I74fb01061b4949d68ec39d0b7d08e6df8dc44b98
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Change-Id: I26124a50d8e05d6f01a2e6dbc4bc8183fb5a09c4
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
DHCPv4 aka BOOTP is somewhat awkward. A DHCP client
on an interface must receive DHCP packets to
the broadcast address or to a unicast address.
Apparently before it's been assigned to itself.
Add this new API to allow external DHCP clients
enable the DHCP client detect feature per interface.
Type: improvement
Change-Id: If55aac03f25a045496be483940e4f5e7e18885b9
Signed-off-by: Ole Troan <otroan@employees.org>
|
|
The recent TX flows generation fix introduced "l3_hdr_offset" which
represents the offset of the IP header in the buffer's data. The problem
is that it is erroneously defined as a 16-bit unsigned integer. If the
calculated offset is negative, "l3_hdr_offset" will get a value close to
UINT16_MAX. And the code will search the IP header somewhere beyond the
buffer's data. For example, this will occur in the case when an ICMP
error is being sent in response to a received packet.
With this fix, make "l3_hdr_offset" a signed integer.
Type: fix
Change-Id: I6f1283c7ba02656d0f592519b5863e68348c5583
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
|
|
Change-Id: Ib7e5cb5adfe81e5cc6243125d91f5179608a7733
Type: improvement
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I8ee90be1b772074c1130b98c71b3be48c973b2e2
Type: improvement
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: feature
Change-Id: Icd9de05f2cbac0e5a6dfb1f1414f21dc4b893104
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Change-Id: I922e216818b78f2fe7689c21a1d27d74a0ae28b8
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Currently, when IPFIX records generation is enabled for an interface in
the TX direction, some rewritten traffic is being sent from that
interface, and the Ethernet header's location has changed due to
rewriting, generated TX flows will contain fields with wrong and zero
values. For example, that can be observed when traffic is rewritten from
a subinterface to a hardware interface (i.e. when tags are removed). A
TX flow generated in this case will have wrong L2 fields because of an
incorrectly located Ethernet header. And zero L3/L4 fields because the
Ethernet type will match neither IP4 nor IP6.
The same code is executed to generate flows for both input and output
features. And the same mechanism is applied to identify the Ethernet
header in the buffer's data. However, such general code usually works
with the buffer's data conditionally based on the direction. For most
input features, the buffer's current_data will likely point to the IP
header. For most output features, the buffer's current_data will likely
point to the Ethernet header.
With this fix:
- Keep relying on ethernet_buffer_get_header() to locate the Ethernet
header for input features. And start using vlib_buffer_get_current()
to locate the Ethernet header for output features. The function will
account for the Ethernet header's position change in the buffer's
data if there is rewriting.
- After fixing Ethernet header determination in the buffer's data,
L3/L4 fields will contain non-zero but still incorrect data. That is
because IP header determination needs to be fixed too. It currently
relies on the fact that the Ethernet header is always located at the
beginning of the buffer's data and that l2_hdr_sz can be used as an
IP header offset. However, this may not be the case after rewriting.
So start calculating the actual offset of the IP header in the
buffer's data.
- Add a unit test to cover the case.
Type: fix
Change-Id: Icf3f9e6518912d06dff0d5aa48e103b3dc94edb7
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
|
|
Do not force cleanup of tcp half-open connection if tcp's cleanup
notification to tls is pending.
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I7bccbe8429a4aab10df1c89b66138b967e04ac19
|
|
Updated the gtpu plugin code to support the PDU Session user plane protocol, required for 5G, as
specified in 3GPP TS 38.415 version 17.0.0. This enables some initial support of 5G gNodeB's with
the gtpu plugin.
New features:
- Basic support for the GTP-U Extension Header Flag.
Packets with one extension can now be decapsulated.
This enables basic support of the PDU Session user plane protocol (3GPP TS 38.415 version 17.0.0).
New tunnels can be created with a PDU enable flag and a 6-bit QoS Flow Identifier (QFI).
With this, encapsulated packets will have the PDU Session extension header, and the QFI set.
- Ability to forward GTP-U packets that are not handled by the plugin directly.
Only GTP-U packets with a message type of 255 (G-PDU) are handled directly.
However, 3GPP TS 29.281 defines several other message types like echo and error indication.
A new feature is added to optionally forward unknown or unsupported packets to a new IP address.
This works separately for unknown GTP-U message types, unknown TEIDs, and packets with an unknown
GTP-U header.
This allows both echo and error indications from a 5G gNodeB to be handled by a different system
outside VPP.
- Simple way to get metrics for active tunnels and on tunnel close.
In 5G session/tunnel lifetime is often short and created frequently.
The normal API becomes too slow and inaccurate when too many tunnels are created and deleted
every second.
Improvements:
- A clean ground structure to handle multiple message type in the future.
The code path for G-PDU packets is optimized for performance, representing the typical case.
Unsupported GTP-U packets enter a slow path that decodes the nature of the error.
This presents a easy hook to handle other message types in the future.
- Improved error reporting
When using traces there is more details in the tunnel descriptions.
- Updated the API with several enums.
Fixes:
- gtpu0->length field in IPv6 was computed with IPv4 header lengths in the encapsulation code.
- vec_set_len (t->rewrite, ...) size was computed with the IPv4 header size also for IPv6 tunnels.
Issues:
- This PR does not enable full support of the 3GPP specification.
In particular it only supports a single QoS/QFI flow for each tunnel.
It ignores all incoming extension header flags.
- API functions might change again when/if more support of the 3GPP TS 38.415 spec is added.
Note that I have bumped the API version to 2.1.0 as it seems to be the correct approach based on
my API changes.
Type: feature
Signed-off-by: Rune E. Jensen <runeerle@wgtwo.com>
Change-Id: I91cd2b31f2561f1b3fb1e46c4c34a5a3c71b4625
|
|
Type: improvement
Change-Id: Ie5fcaa706ab0995e0021cf1ee74b95c5a3b30283
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
- notify app on failed connect
- avoid cleanup of ctx before transport cleanup to be able to handle
pending rx notifications.
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I1b70ad45109d4c942afa1990dfce4fc44a50a637
|
|
In some anti-replay, some functions weren't using the boolean
telling if the window was huge or not. Hence, limiting the constant
propagation at compilation.
Type: fix
Change-Id: Ie5f2dda38339bb32113c6f7b2b82c82135fc92a8
Signed-off-by: Maxime Peim <mpeim@cisco.com>
|
|
Make sure underlying transport connection is not removed on rescheduled
read event.
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I0137a2e43aa84d9442279e036c25771aeefd207f
|
|
Change-Id: If380e4ab6ca30243137fd31fbe51845c0414721a
Type: improvement
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Change-Id: I4a0578598182339bcf76e6b01da76b590a06f773
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
af_packet does not process data until the interface is UP. If after interface creation, but before it is UP, the host interfaces are flooded, then blocking case may occur - VPP interface will never be able to process the data.
If the EDGE_TRIGGERED flag is set, the event will not arrive, because nothing new is happening anymore (probably because the queue is already full).
Therefore, we need to use LEVEL_TRIGGERED (default value), which indicates that there is still unprocessed data (accumulated after interface creation, but before it was UP).
Type: fix
Signed-off-by: Artem Glazychev <artem.glazychev@xored.com>
Change-Id: Ied459fd194149d09f226bcb0a5907b3e327b148a
|
|
As a result of recent fixes, all currently stored flows of an interface
are deleted when the feature is being disabled for the interface. This
includes stopping the timer and freeing the flow entries for further
reuse. The problem is that meta information is not cleared in the flow
entries being deleted. For example, packet delta count will keep its
value. The next flow that gets one of these pool entries will already
have a non-zero packet count. So the counting of packets will start from
a non-zero value. And incorrect packet delta count will be exported for
that flow.
With this fix, clear meta information too when clearing interface state.
Also, update the corresponding test to cover this case.
Type: fix
Change-Id: I9a73b3958adfd1676e66b0ed50f1478920671cca
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
|
|
The array bounds and string overread check on GCC 12 report a dozen of
false positives that result in VPP build failures on ubuntu 22.04.
Work around this build issue by unconditionally disabling these two
warnings if C compiler is GCC 12 or newer version.
Type: fix
Signed-off-by: Jieqiang Wang <jieqiang.wang@arm.com>
Change-Id: I999e847bb625ebdf3ef5f11b11598c553f306670
|
|
GCC 12 complains about such errors while the code itself looks good.
Type: fix
Signed-off-by: Jieqiang Wang <jieqiang.wang@arm.com>
Change-Id: I021719fdbf7d9bd93a12eac76aeac8cbca13a810
|
|
Change-Id: If9381ae7283488b352a3c22f85732cd56ac6bfd9
Type: fix
Fixes: 9937359, 91ff0e9
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Change-Id: I0de1c51455b0d3958c75ab5626a318ac656adbe7
Signed-off-by: Dengfeng Liu <liudf0716@gmail.com>
|
|
DPDK added new Rx checksum flags[1] to handle cases like the virtual
drivers. Current check of flags is not strict enough for flags like
RTE_MBUF_F_RX_IP_CKSUM_NONE and will always be true no matter the
checksum in packet is good or bad.
Fix this issue by comparing the result of AND operation with the
correspinding Rx checksum flags.
Before this patch, packet trace prints the offload flags as below:
Packet Offload Flags
PKT_RX_IP_CKSUM_GOOD (0x0080) IP cksum of RX pkt. is valid
PKT_RX_IP_CKSUM_NONE (0x0090) no IP cksum of RX pkt.
PKT_RX_L4_CKSUM_GOOD (0x0100) L4 cksum of RX pkt. is valid
PKT_RX_L4_CKSUM_NONE (0x0108) no L4 cksum of RX pkt.
After this patch, packet offload flags would be like:
Packet Offload Flags
PKT_RX_IP_CKSUM_GOOD (0x0080) IP cksum of RX pkt. is valid
PKT_RX_L4_CKSUM_GOOD (0x0100) L4 cksum of RX pkt. is valid
Type: fix
[1] https://github.com/DPDK/dpdk/commit/5842289a546ceb0072bd7faccb93821e21848e07
Signed-off-by: Jieqiang Wang <jieqiang.wang@arm.com>
Change-Id: I3182022d9ccd46b2fc55bb3edfbfac9062ed7c89
|
|
Type: improvement
Change-Id: Ic8e2785bf375882defe5a1d299948d522cdd4895
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Fixes: 599a16b
Change-Id: I954e037ab944028798f9aa2a93f45322c8c7b4bb
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Signed-off-by: Stanislav Zaikin <stanislav.zaikin@46labs.com>
Change-Id: I16b48460b3fcd82bbb89c375402cb2455414d8bb
|
|
Type: improvement
Change-Id: Ie6987736faf7d8a641762e276775da8ee0c03ea4
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Change-Id: I9b9bb37a0895366b412f042b0e2da5bbdd477325
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Do not add ip header as that's added by tcp output and fix checksum.
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I9439acf5c66184af0350b1d4d7406b3feb2e79a1
|
|
Type: feature
Change-Id: I9ae0dbf28b4571a37c568b587b771f90c06f200d
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: feature
Change-Id: I20c56e0d3103624407f18365c2bc1273dea5c199
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I4001f39afde8c33b60c15f74034bcce013fbbf70
|
|
As long as ack and segment are legitimate accept ooo data as we
transition to established.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I85cdc65d70cb8ae689a9ce9bbe4f86228b1ac533
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I231b319d4d7aa3e17cc8cfe8aaa4762995a5b2c4
|
|
Type: test
Change-Id: Ib320cfb5e20f12614c013a92ac15490f8ca3a7ce
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
This fix differentiates UDP and UDP-encapsulated ESP packets processing.
While UDP-encapsulated ESP traffic is processed as IPsec traffic, UDP as
other plain-text protocols is NOT dispatched against SPD policies.
Key logic is taken from RFC 3948, and is based on the fact
that the checksum of UDP packet encapsulating ESP packet must be zero.
Type: fix
Signed-off-by: vinay tripathi <vinayx.tripathi@intel.com>
Change-Id: Ib1b4d240eea8e89f2daf17ec833905f26cdb31bd
|
|
ipsec_esp_packet_process
This inline function is introduced to simplify code readability and allows to splitting of
UDP and ESP processing in the next step.
Type: improvement
Change-Id: Ida4d6abbed141ac74d4d285900777778eb8a5a1d
Signed-off-by: Vinay Tripathi <vinayx.tripathi@intel.com>
|
|
Type: test
Change-Id: Ib809f5a6c9e2f08d87f0070231df04d5f0040ca0
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Change-Id: Ia8b5421cbaaf861ddb3ad7aeca53a077ff18864e
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
Type: fix
|
|
Type: improvement
Since RFC4303 does not specify the anti-replay window size, VPP should
support multiple window size. It is done through a clib_bitmap.
Signed-off-by: Maxime Peim <mpeim@cisco.com>
Change-Id: I3dfe30efd20018e345418bef298ec7cec19b1cfc
|
|
Currently, TCP flags of a flow entry don't get reset once the flow is
exported (unlike other meta information about a flow - packet delta
count and octet delta count). So TCP flags are accumulated as long as
the flow is active. When the flow expires, it is exported the last time,
and its pool entry is freed for further reuse. The next flow that gets
this pool entry will already have non-zero TCP flags. If it's a TCP
flow, the flags will keep being accumulated. This might look fine when
exported. If it's a non-TCP flow, that will definitely look erroneous.
With this fix, reset TCP flags once the flow is exported. Also, cover
the reuse case with tests.
Type: fix
Change-Id: I5f8560afffcfe107909117d3d063e8a69793437e
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
|
|
Type: fix
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Icdff3528fcaf863b400b9aca6c30d284bc17d5f0
|
|
Type: test
Change-Id: Iba94edb7eb439ddc994d9a16cb52108373d052ce
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: improvement
Change-Id: I2427e1a93e89e9a7ac884b84352b96cf523ae11e
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: test
Change-Id: I8665492c2f7755901a428aacdb27e98329ff557a
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Setting and using the SOURCE_DATE_EPOCH variable takes
care of most of the magic necessary.
https://reproducible-builds.org/docs/source-date-epoch/
vpp-ext-deps packages after this change is being built with that
date set to date of the last modification of the
subtree (similar logic to deriving the "number" for
the package version)
For the rest of the packages, pinning the following
three variables should result in bit-identical
artifacts across multiple runs:
export SOURCE_DATE_EPOCH=$(date +%s)
export VPP_BUILD_HOST="buildhost"
export VPP_BUILD_USER="builduser"
Add a blurb in the docs describing this new functionality.
Type: improvement
Change-Id: I71b085f0577b2358aa98f01dafd8e392239420a6
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|